Updated Nov 16, 2026· 18 min read

Key takeaways

  • Compare six screw on caps for weed jars on neck size, liner type, material and finish, from 28mm concentrate lids to 53mm flower jar caps, with a buying guide.

A weed jar is only as good as its lid: the wrong neck size will not thread on, and the wrong liner will not seal. This guide compares six screw on caps for weed smokers sold separately for cannabis jars, on neck size, liner, material and finish, so a replacement cap can be matched to the jar already on the shelf.

Quick verdict

The six caps split by neck size first: two 28mm lids for 5ml concentrate jars, one 32mm pillow cap for 5ml jars, one 38mm lid for 9ml concentrate jars, and two 53mm lids for 2oz and 3oz flower jars. Every one is a child-resistant push down and turn design, and every one is sold as a lid only.

Within that frame, the differences are material and liner. The two 28mm lids split into a ribbed grip version and a smooth matte version with a liner choice. The 53mm polypropylene lid arrives with foil liners inserted, the Sana 38mm lid is made from reclaimed ocean-bound plastic, the Humidi 53mm lid is plant-based and home compostable, and the Gamut 32mm pillow cap is the only entry that prints a full dimension table, down to cap height and material thickness.

Product Fits Liner Material Main limit
28mm Certified Child-Resistant Lids – Ribbed 5ml glass concentrate jars Foam with PET skin Recyclable polypropylene One neck size only
28mm Certified Child-Resistant Lids – Smooth Matte 5ml glass concentrate jars Foam or foil Recyclable polypropylene Foam liner does not affix to the jar
53mm Certified Child-Resistant Lids – Smooth Matte – Foil Lined 2oz and 3oz glass flower jars Foil, pre-inserted Recyclable polypropylene Full seal needs a heat induction sealer
Sana Reclaimed Ocean-Bound Plastic Lids – 38mm 38mm neck jars, 9ml concentrate jars Foam or PE/PET Esterfoil Reclaimed ocean-bound plastic Fits the 38mm neck thread only
Humidi 53mm Certified Child-Resistant Lids – Home Compostable 53mm neck jars, 2oz and 3oz glass jars Paper, foam or foil Home compostable PHA Custom colors start at 10,000 units
Push Down and Turn Plastic Pillow PCR Caps, 32mm 5ml glass jars Foam per the spec table Plastic Sold in a 250 count case

How we selected

A cap qualified for this guide only when its product page printed the neck size, the jar it fits, the liner and the material. Pages that sold a jar with a lid included were set aside, because the keyword asks for caps on their own, and wholesale listings without a defined product were left out as well.

That filter produced a consistent set: threaded, child-resistant closures made and sold for cannabis jars, from two packaging suppliers whose pages print real specifications. Every figure below is copied from the page read for that cap. One entry carries a warning of a different kind: the Gamut page disagrees with itself about its liner, naming one liner material in the product title and another in its specification table, and the entry below flags that conflict instead of choosing a side.

Six caps is also the honest size of this category. Screw-on caps for weed jars are packaging components, not consumer gadgets, and the range of distinct, specification-led products is small. Rather than pad the list with kitchen jar lids or complete stash jars, the guide stays with caps that a grower, brand or home user can order on their own and match to a jar by printed size.

Screw on caps for weed smokers: the six lids in detail

The six lids below run from the smallest neck size to the largest, because neck size is the first decision in this category and the one that cannot be fudged. Each entry gives the printed fit, liner and material first, then the limits, including one listing that disagrees with itself about its own liner.

28mm Certified Child-Resistant Lids – Ribbed

The ribbed 28mm lid is the grip-first option for small concentrate jars: a certified child-resistant closure in recyclable polypropylene, made in the USA, with a pre-inserted foam liner faced with PET. The black version carries the opening instruction printed on top, in green text that reads push down and turn, close tightly.

This lid suits a user capping 5ml glass concentrate jars, the fit the maker prints on the page. The ribbed wall is the practical feature: a small 28mm cap offers little to hold, and the ribbing gives fingers purchase during the push down and turn action. The printed instruction on the black version does the explaining for anyone picking the jar up cold, while the white version is unprinted for a plain finish.

The maker describes the pre-inserted foam liner with its PET skin as providing the seal that locks in flavor and aroma, and offers direct printing and label customization on the lid for buyers who brand their jars. What the page does not print is a thread series number or a cap height, so the specification is the neck size and the named jar fit rather than a full engineering drawing.

  • Pros: ribbed grip on a small cap, printed opening instruction, liner already inserted
  • Cons: fits the 28mm neck only; no thread series or dimensions printed

Buy it if your jars are 5ml glass concentrate jars and you want the easier grip of the two 28mm designs. Skip it if your jars take a different neck size, or if you want a foil seal, because this version’s liner is foam and the foil choice sits with the smooth matte version below.

28mm Certified Child-Resistant Lids – Smooth Matte

The smooth matte 28mm lid shares its size and material with the ribbed version and changes the surface and the liner choice: a smooth matte finish, and a choice between a foam liner that sits loose in the cap and a foil liner that can be sealed to the jar rim with a heat induction sealer.

This version suits a buyer who wants a cleaner look on the shelf and a decision about sealing. The maker explains the liner split in plain terms: foam liners do not affix to the jar, but still reduce the chance of leakage and provide some sealing of air, while foil liners can be sealed with a heat induction sealer for a fully airtight seal. That makes the smooth lid the flexible 28mm option, one cap covering both a simple reclosable jar and a sealed retail jar.

The rest of the specification matches its ribbed sibling: certified child-resistant, made in the USA from recyclable polypropylene, printed as a perfect fit on the maker’s 5ml glass concentrate jars, with direct printing and label customization offered. As with the ribbed version, no thread series or cap dimensions are printed, so the match rests on the 28mm neck size and the named jars.

  • Pros: smooth matte finish, foam or foil liner choice, foil can be induction sealed
  • Cons: foam option does not affix to the jar; induction sealer is separate equipment

Buy it if you cap 5ml concentrate jars and want the option of a bonded foil seal without changing cap size. Skip it if you prefer a ribbed grip for daily opening, or if a loose foam liner is all you need and the plainer ribbed version’s printed instruction top is more useful to you.

53mm Certified Child-Resistant Lids – Smooth Matte – Foil Lined

The 53mm smooth matte lid scales the same design up to flower jars: it fits the maker’s 2oz and 3oz glass flower jars, in the same recyclable polypropylene, with foil liners already inserted. The maker states those foil liners can be sealed with a heat induction sealer for a fully airtight seal.

This is the flower jar entry in the polypropylene line, sized for the jars that hold whole buds rather than concentrates. The pre-inserted foil liner is the headline: the cap arrives ready to seal, and a grower or brand with an induction sealer can bond the foil to the rim so the jar shows a clean, unbroken seal at first opening. Paired with the matched glass jars, the maker describes the seal as locking in flavor and aroma.

Specifications printed on the page cover the 53mm size, the smooth matte finish, the foil lining, the certified child-resistant action, manufacture in the USA from recyclable polypropylene, and the named fit on 2oz and 3oz glass flower jars. Direct printing and label customization are offered here as well. The page does not print a paper or foam liner alternative for this size, so the foil format is the product, not an option within it.

  • Pros: sized for flower jars, foil liner pre-inserted, induction sealing supported
  • Cons: foil is the only liner listed at this size; full seal needs separate equipment

Buy it if you pack flower in 2oz or 3oz glass jars and want a sealed retail finish from a single cap order. Skip it if your jars are concentrate sized, or if you reopen jars constantly and have no use for a bonded seal, since a foam-lined cap is the simpler tool for that pattern of use.

Sana Reclaimed Ocean-Bound Plastic Lids – 38mm

The Sana lid is the material story in this group: a certified child-resistant closure made from 100 percent reclaimed ocean-bound plastic, in pure PET, HDPE or PP, made in the USA. It fits jars with a 38mm neck thread, including the maker’s 9ml glass concentrate jars, and the jar is not included.

This lid suits a buyer who wants the packaging itself to carry an environmental claim that is printed and specific. The maker states the plastic is reclaimed ocean-bound material, collected before it reaches the ocean, and that the resulting PET, HDPE or PP is easily recyclable. The 38mm size also fills a gap in this guide, sitting between the 28mm concentrate lids and the 53mm flower lids, matched to 9ml concentrate jars.

The specification on the page covers the 38mm neck size, the certified child-resistant action, USA manufacture, and a choice of pre-inserted liners: foam or PE/PET Esterfoil. The page is explicit that the item is the lid only. It does not print a thread series beyond the 38mm neck thread wording, and the liner arrives as one of the two named types, so a buyer with a firm liner preference should confirm which is fitted before a large order.

  • Pros: reclaimed ocean-bound plastic, two liner types, mid-range 38mm size
  • Cons: one neck size; liner type should be confirmed before bulk ordering

Buy it if your jars carry a 38mm neck and the reclaimed material matters to your brand or your own standards. Skip it if you need a foil liner bonded by induction as a named feature, because this page lists foam and Esterfoil liners rather than the induction-seal wording printed for the polypropylene lids.

Humidi 53mm Certified Child-Resistant Lids – Home Compostable

The Humidi lid replaces plastic altogether: a certified child-resistant 53mm closure made from home compostable PHA produced from canola oil, with no plastics in the material. It fits any jar with a 53mm neck thread, including 2oz and 3oz glass jars, and comes in four colors and three liner types.

This is the entry for a buyer who wants to leave plastic out of the package entirely. The maker describes the PHA as plant-based, made from canola oil, and designed to break down in environments with high bacterial and fungal activity, consumed by microorganisms as a carbon food source, leaving no microplastics behind. Those are the maker’s own claims for the material, printed on the page, and they are the reason this lid exists beside the polypropylene versions at the same 53mm size.

The printed options are the widest in this guide: colors listed as clear, natural tan, black and white, and liner types listed as paper, foam and foil. The fit wording is also the broadest, covering any glass or plastic jar with a 53mm neck thread, including the maker’s own 3oz natural jar. Two limits sit in the small print: quantities come in case count intervals, and custom colors are available only at 10,000 units or more. The item is the lid only, with no jar included.

  • Pros: plastic-free PHA material, three liner types, four colors, broad 53mm fit
  • Cons: case count ordering; custom colors need 10,000 units or more

Buy it if you pack flower in 53mm neck jars and want a home compostable cap with a real liner choice. Skip it if you need a handful of lids rather than a case quantity, or if long shelf storage in damp conditions is expected, because a material designed to break down asks for more thought about storage than polypropylene does.

Child Resistant Push Down and Turn Plastic Pillow PCR Caps, 32mm

The Gamut pillow cap is the dimensioned entry: its page prints a full spec table with cap height, diameter and material thickness alongside the 32mm size and 400 threading. It is a ribbed, flat, glossy black push down and turn cap for 5ml glass jars, sold in a 250 count case and listed in stock.

This cap suits a buyer who specifies packaging from a table rather than from a jar name. The printed dimensions are exact: cap height 15.85mm, cap diameter 31.49mm and material thickness 1.32mm, with the threading given as 400 and the shape as flat with a ribbed style and glossy finish. The pillow profile is the maker’s concentrate jar format, described as a topper for 5ml glass jars, and the case of 250 count matches that production scale.

One conflict on the page needs stating plainly. The product name carries the words Teflon Liner, while the page’s own specification table lists the liner material as foam. Both wordings come from the same listing, so a buyer who cares about the liner should confirm which is fitted before ordering rather than assume either. The page also lists the cap in stock with a per-unit and per-case format, and the material is given simply as plastic, in a line whose SKU carries the PCR marker for recycled content.

  • Pros: full printed dimensions and threading, in stock, made for 5ml concentrate jars
  • Cons: name and spec table disagree on the liner; sold by the 250 count case

Buy it if you cap 5ml jars in production quantities and want dimensions and threading printed before you commit. Skip it if the liner material is decisive for your product and you cannot get the listing’s conflict resolved first, or if a 250 count case is more caps than your operation will use.

Buying guide

Caps look like the simplest part of a weed jar, and they are the part most often bought wrong. The printed details that decide a good match are few: neck size, thread, liner and material, plus the pack format the cap is sold in. The sections below follow those details in the order a buyer meets them.

Measuring the neck before ordering screw on caps for weed smokers

Every maker in this guide sizes its lids by the jar neck in millimeters: 28mm, 32mm, 38mm and 53mm across these six products. The number is the thread diameter of the jar opening, not the width of the jar body, so it has to be read from the jar’s neck or from the jar maker’s own specification.

Diameter alone is not the whole match. Two jars can share a neck diameter and still differ in thread form and sealing surface, so a cap that looks right can seat badly or cross-thread. The makers here solve the problem by naming the jars each cap fits, and the Gamut page adds the threading figure, 400, beside its 32mm size. The reliable order of work is: identify the jar, read its neck size and finish, then choose the cap printed for that jar or that exact finish.

Push down and turn: how these closures open

All six caps here open the same way: press down and turn, the child-resistant action printed on the ribbed 28mm lid’s top. That coordinated movement is what separates a certified child-resistant closure from a plain threaded cap that opens with rotation alone, and it is the standard format for cannabis jars.

The practical consequence is grip. A closure that must be pressed while turning asks more of the hand than a plain screw cap, which is why the ribbed walls on the 28mm lid and the Gamut pillow cap matter, and why the printed instruction on the black ribbed lid is useful on a shared shelf. A smooth matte cap looks cleaner and gives up a little of that grip, a trade the buyer should make deliberately rather than discover at the jar.

Foam, foil and paper liners compared

The liner is the part that meets the jar rim, and the makers here offer three kinds: foam, foil and paper. Foam sits inside the cap and presses against the rim; foil can be bonded to the rim with a heat induction sealer; paper is the plain option in the Humidi line, listed beside foam and foil.

Choose by how the jar will be used. A jar opened daily wants a foam liner, which reseals by pressure every time the cap goes back on. A jar sold at retail wants foil, bonded once for an unbroken first-opening seal. The Esterfoil option on the Sana lid and the PET-faced foam on the ribbed 28mm lid sit between the two, adding a film face to a foam body. The Gamut conflict is the exception to keep in mind: where a page names two liner materials, confirm the fitted one before the order, not after it arrives.

Materials: polypropylene, reclaimed plastic and PHA

Three materials cover these six lids. Recyclable polypropylene is the standard, used by three of the six lids here. Reclaimed ocean-bound plastic appears in the Sana lid, and plant-based PHA appears in the Humidi lid, which the maker describes as home compostable and made from canola oil.

Material choice here is mostly about the story the package tells and the conditions it will live in. Polypropylene is the known quantity: light, consistent and recyclable per the makers’ wording. Reclaimed ocean-bound plastic keeps the same form while changing the feedstock, which suits a brand built on recycled content. PHA changes the end of the story instead, trading a permanent material for one designed to break down, which asks for drier, more deliberate storage in return.

Pack counts and buying in quantity

None of these caps is sold as a single retail lid in a blister pack. Five of these listings sell per unit, the Humidi page states quantities come in case count intervals, and the Gamut cap is sold as a 250 count case, which suits growers and brands more than one-off buyers.

For a home user replacing a lost or cracked lid, that format is the friction in this category: the caps exist, the specifications are printed, and the order quantities are set for people who cap jars by the dozen or the hundred. The sensible home move is to order with the jars, from the same maker, in the smallest interval offered, so the neck size and thread are matched by the seller rather than guessed from a photograph.

FAQ

Cap questions tend to be practical: fit, sealing and what arrives in the box. The answers below rest on the six product pages read for this guide and on general packaging practice, and they stick to printed specifications wherever a number is involved, because a cap is a specification product.

Are screw on caps for weed smokers sold with jars?

No, and the makers say so on the page: the Sana and Humidi listings both state plainly that the item is the lid only and does not include a jar. The other four listings sell caps as components in the same way, priced per unit or by the case, so a matching jar is always a separate purchase.

That separation is normal in packaging, and it has one advantage: a worn, cracked or wrong-sized lid can be replaced without replacing the jar. It also means the buyer carries the matching work. Ordering the cap and jar from the same maker, in the size that maker pairs together on the product page, is the simplest way to keep that work to a minimum.

What does certified child-resistant mean on a lid?

On these pages it means the closure uses a coordinated opening action, push down and turn, that the maker lists as certified child-resistant for cannabis packaging. It is a property of the cap and jar used together, so the certification wording belongs to the matched pair rather than to the lid alone.

Child-resistant is not a promise that a package cannot be opened; it describes a tested opening difficulty for young children paired with an action adults can perform. The makers here print the action itself on the product, push down and turn, close tightly, which is the part a buyer can verify at a glance. A cap bought away from its named jar should be treated as unproven until the pair is tried together.

Can a foil liner be sealed without special equipment?

The makers tie the full foil seal to a heat induction sealer: the 53mm lid’s page and the 28mm smooth lid’s page both state the foil liners can be sealed with that machine for a fully airtight seal. Without it, the foil liner still sits in the cap as a contact layer, but the bonded seal is not formed.

For a home user, the practical read is that foil without a sealer behaves like a plain liner: it covers the rim and is held by cap pressure alone. The bonded seal is a retail feature, giving the first opener a visibly unbroken surface. A buyer without a sealer loses nothing by choosing foam instead, and gains a liner that reseals the same way after every opening.

Will these caps fit a kitchen mason jar?

Only if the neck thread matches exactly, which is a specification question rather than a brand question. These lids are printed for named cannabis jars and neck sizes, 28mm to 53mm, and none of the six pages lists a kitchen mason jar as a fit, so a match should never be assumed from diameter alone.

Kitchen jars add a second complication: many use two-piece lids or lug threads rather than the continuous thread these caps are built around. A cap that starts on the thread can still fail to seat or seal. The printed route stays the reliable one: match the cap to a jar whose maker names that cap, or to a neck finish that matches the cap’s printed size and threading in full.

How many caps should a home grower order?

That depends on the pack format, which is printed on each page: per-unit sales on most of these listings, case count intervals on the Humidi page, and a fixed 250 count case for the Gamut pillow cap. A grower capping a small harvest works from the jar count; the case formats suit brands and dispensaries.

A small over-order is rational in this category, because caps are the part that cracks, gets cross-threaded or disappears between harvests, and a spare set in the right neck size costs little shelf space. What does not work is spreading an order across sizes in the hope that one will fit: an unmatched cap is not a spare, it is stock for a jar the grower does not own.

Conclusion

For most weed jars the match is decided by one number, the neck size, and the six lids here cover the common sizes from 28mm to 53mm. Pick the ribbed or smooth 28mm for concentrate jars, the Sana 38mm for a recycled material, and a 53mm lid for flower jars, with the Humidi PHA as the plastic-free route.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.