Key takeaways
- Six refillable vape starter kits for smokers compared on maker-listed battery size, pod capacity, coil options, charging and size, with a buying guide and FAQ.
A refillable vape starter kit pairs a rechargeable device with pods or a tank you fill with your own e-liquid. This guide compares six kits on the specs their makers print: battery size, pod capacity, coil options, charging, and size, so a smoker can match a kit to daily habits and to the size of device they want to carry.
Quick verdict
Short on time? The six kits split into three shapes: slim pen-style pods for a tight cigarette-like draw, wider pod kits with screens and airflow sliders for adjustment, and one classic tank kit with replaceable coils for the largest battery and tank in the set.
For most switchers, the OXVA Xlim Pro 2 is the balanced default: a 1300 mAh battery, adjustable output from 5 to 30 watts, top-fill pods, a color screen, and a full charge in about 25 to 30 minutes on the listing page. The VOOPOO Argus G3 carries the largest battery of the pod kits at 1500 mAh and adds automatic wattage detection, while the Uwell Caliburn G4 pairs a 1300 mAh battery with the joint-largest pods here at 3 ml and two output modes. The Geekvape Wenax Q2 is the simplest to run, with draw activation only and no fire button to learn. The Lost Vape Ursa Nano Pro 2 is the slimmest kit in the set at 14.8 mm thick. The Innokin Endura T22 Pro stands apart as the only tank kit: a 3000 mAh battery, a 4.5 ml tank, and replaceable coils instead of throwaway pods.
How we selected
Every kit in this guide appears on a maker or specialist store page that lists it for sale, and each figure quoted below, from battery size to pod capacity, is copied from those pages. Kits that could not be read on a live product page were left out.
The shortlist favors starter kits in the plain sense: a box that contains the device plus at least two pods or two coils, a charging cable, and a manual, so a first-time buyer needs nothing else except e-liquid. All six kits are refillable by design, either through pods with built-in coils that are replaced whole, or through a tank with replaceable coils in the case of the Endura T22 Pro. Output figures, coil resistances, and capacities are the makers printed numbers, and where two listings for the same kit print different details, the difference is flagged in the product section rather than smoothed over.
Refillable vape starter kits for smokers: the six kits compared
The table puts the headline specs side by side: battery size, output range, pod or tank capacity, and the coil or pod options each maker prints. Full notes on filling style, screens, airflow, and kit contents sit under each product heading below the table.
| Kit | Battery | Output | Pod or tank capacity | Key spec |
|---|---|---|---|---|
| OXVA Xlim Pro 2 Vape Kit | 1300 mAh | 5 to 30 watts | 2 ml | 0.56 inch color screen |
| Uwell Caliburn G4 Pod Kit | 1300 mAh | 5 to 35 watts | 3 ml | Storm Mode and Waves Mode |
| VOOPOO Argus G3 Pod Kit | 1500 mAh | 5 to 30 watts | 2 ml | 0.96 inch TFT color screen |
| Lost Vape Ursa Nano Pro 2 Kit | 1000 mAh | 5 to 30 watts | 2.5 ml | 0.42 inch OLED screen |
| Geekvape Wenax Q2 Pod System Kit | 1250 mAh | 8 to 30 watts | 3 ml | Draw activation only |
| Innokin Endura T22 Pro Kit | 3000 mAh | 9.5 to 13.5 watts, four levels | 4.5 ml tank | Replaceable Prism T18 coils |
Two patterns stand out in the numbers. Pod kits cluster between 1000 and 1500 mAh with 2 to 3 ml pods, while the single tank kit doubles the battery and more than doubles the liquid capacity at the cost of a bigger body. Coil choice also splits the set: five kits use pods with built-in mesh coils, and one uses a tank with separate replaceable coils.
OXVA Xlim Pro 2 Vape Kit
The Xlim Pro 2 suits a smoker who wants a slim pen-style kit with real adjustment: wattage control, an airflow slider, and a screen that shows battery level, wattage, coil resistance, and puff count, all in a 67 g body that charges fast. It is the reference point the other five kits are measured against below.
The listing page gives a 1300 mAh built-in battery with adjustable output from 5 to 30 watts, Smart Mode, and variable wattage, with inhale activation for the draw and a button for settings. The 0.56 inch color screen reads out battery percentage, wattage, resistance, and puff count. USB-C charging at 5V/2A fills the battery in about 25 to 30 minutes, and the zinc alloy frame measures 114.5 x 25 x 15 mm. Pods hold 2 ml. The kit ships with Xlim V3 top-fill pods, which fill through the mouthpiece, in 0.6 ohm and 0.8 ohm versions, and the device also takes Xlim V2 pods; the printed pod range covers 0.4, 0.6, 0.8, and 1.2 ohm integrated mesh coils. A side airflow slider lets you tighten or loosen the draw. The box holds the device, the two V3 pods, a USB-C cable, a lanyard, and a user manual.
- Pros: full charge in about 25 to 30 minutes; top-fill pods; screen shows puff count and resistance; airflow slider for draw control
- Cons: 2 ml pods are the joint smallest here; pod life figure is not printed on the page read
Buy if you want a pocketable kit with a screen, fast charging, and top filling. Skip if you refill often and would rather carry 3 ml pods, or if you want a tank with replaceable coils instead of whole-pod swaps.
Uwell Caliburn G4 Pod Kit
The Caliburn G4 fits a smoker who wants bigger pods and simple mode choice: 3 ml pod capacity, a 1300 mAh battery, output up to 35 watts, and two named output modes, Storm Mode and Waves Mode, in a light 54.7 g body with an OLED screen. It is the lightest kit in this guide.
Two listing pages for the G4 print a 1300 mAh built-in battery, button-adjusted output from 5 to 35 watts, dimensions of 26 x 15.65 x 114.98 mm, and a weight of 54.7 g, with PCTG, ABS, and aluminum alloy in the materials list. The pod capacity is 3 ml on the fuller listing. The device takes GPP pods in 0.4, 0.6, 0.9, and 1.2 ohm and stays compatible with G3 pods in 0.4 and 0.9 ohm. An adjustable airflow slider plus a reversible pod gives four draw setups, and the kit fires by button or auto-draw. One point to read carefully before ordering: the two listings bundle different pod pairs, one with 0.4 and 0.9 ohm GPP pods and one with 0.6 and 0.9 ohm, and fill wording differs between them, so the exact box contents depend on the listing you buy from. The box adds a USB-C cable and a manual.
- Pros: 3 ml pods mean fewer refills; widest pod resistance range here; lightest kit in the set at 54.7 g; both button and auto-draw firing
- Cons: bundled pod pair and fill style vary by listing; battery is mid-pack at 1300 mAh
Buy if pod capacity and a light body matter most and you are happy to confirm the bundled pods on the listing before ordering. Skip if you want one fixed, unambiguous kit configuration, or the largest battery in this guide.
VOOPOO Argus G3 Pod Kit
The Argus G3 is the pick for a smoker who charges least often: its 1500 mAh battery is the largest in a pod kit here, the GENE AI 2.0 chipset sets wattage automatically, and a 0.96 inch TFT color screen is the biggest display in the set. A lanyard is included in the box.
The listing page prints a 1500 mAh integrated battery, adjustable output from 5 to 30 watts, automatic wattage detection under the GENE AI 2.0 chipset, and Type-C charging at 5V/2A with a 45 minute charge time; the same page describes runtime of up to 5 days for mouth-to-lung use, which is the makers wording rather than a measured figure. Pods hold 2 ml on the page read and fill from the top through a silicone stopper. The box includes Argus V2 top-fill pods at 0.4 and 0.7 ohm, and the full Argus pod range printed covers 0.4, 0.7, 1.0, and 1.2 ohm with iCOSM CODE 2.0 coil technology. The kit fires by auto-draw or button, airflow adjusts in several directions, and a lanyard is included alongside the Type-C cable and manual. The page read does not print the device dimensions, so no size figure is given here.
- Pros: largest pod-kit battery at 1500 mAh; automatic wattage detection; biggest screen here; top-fill pods
- Cons: 2 ml pods; dimensions are not printed on the page read; runtime wording is a maker claim, not a tested figure
Buy if battery size and automatic wattage matter more than pod capacity. Skip if you want the maker to print full dimensions before you buy, or if 3 ml pods matter more than charge intervals.
Lost Vape Ursa Nano Pro 2 Kit
The Ursa Nano Pro 2 suits a smoker who wants the slimmest body in this guide: at 113 x 24 x 14.8 mm it is a flat, pocket-friendly pod kit with a 1000 mAh battery, a small OLED screen, and 2.5 ml cartridges that fill from the side. A spare cartridge is included in the box.
The listing page prints a built-in 1000 mAh battery, adjustable output from 5 to 30 watts, a 0.42 inch OLED screen, and zinc alloy with plastic construction. Cartridges hold 2.5 ml and fill from the side through a silicone plug, and the device fits both Ursa Cartridge V1 and Ursa Cartridge V2. Charging is Type-C, with charging voltage listed at 5V/1A and support for 5V/2A fast charging, and battery voltage is printed as 3.0V to 4.2V. The box holds the device, one Ursa Cartridge V2 fitted, one spare Ursa Cartridge V2, a Type-C cable, a user manual, and a warranty card. One gap to note: the page read does not print the resistances of the two included cartridges, so the exact coil ratings in the box are a detail to confirm on the listing before ordering.
- Pros: slimmest body here at 14.8 mm thick; 2.5 ml cartridges beat the 2 ml pods; takes both V1 and V2 cartridges; spare cartridge in the box
- Cons: smallest battery here at 1000 mAh; included cartridge resistances are not printed on the page read; side filling is less tidy than top filling
Buy if a flat, light, pocket-first kit matters most and daily charging is acceptable. Skip if you want the longest time between charges, or printed coil ratings for the exact cartridges in the box.
Geekvape Wenax Q2 Pod System Kit
The Wenax Q2 fits a smoker who wants the fewest controls possible: it is draw-activated only, with no fire button, a three-level airflow slider, a 1250 mAh battery, and 3 ml pods, plus a 0.85 inch OLED screen for wattage and battery. A lanyard and a spare pod are included.
The listing page prints a 1250 mAh built-in battery, wattage from 8 to 30 watts, dimensions of 94.6 x 26.1 x 16.2 mm, and a 0.85 inch OLED color screen showing wattage, puff count, battery, and resistance. At 94.6 mm long it is the shortest device in this guide. Pods hold 3 ml in the standard version and 2 ml in the TPD version, fill from the top on the page read, and the device works with the full Geekvape Q Series pod range. The box includes a 0.6 ohm Q pod fitted and a 0.8 ohm Q pod spare, a USB-C cable rated at 5V/2A, a lanyard, and a manual. One caution: a second listing for this kit prints a different length, so treat the 94.6 mm figure as the number from the page read here and confirm dimensions on the listing you order from.
- Pros: shortest body here; no fire button to learn; 3 ml standard pods; three-level airflow slider; spare pod in the box
- Cons: draw activation only, so no button option; dimension figures differ between listings; TPD version drops to 2 ml pods
Buy if you want the simplest possible operation in a short body with big pods. Skip if you prefer a fire button, or if you need dimensions confirmed to the millimeter before ordering.
Innokin Endura T22 Pro Kit
The Endura T22 Pro is the traditional option: a pen-style battery with a separate top-fill tank and replaceable coils, a 3000 mAh battery that doubles every pod kit here, a 4.5 ml tank, and four fixed power levels instead of a screen. It is the oldest format here, and the most familiar to long-time vapers.
The listing page prints an internal 3000 mAh battery at 3.7V and 11.1Wh, four power levels of 9.5, 11, 12.5, and 13.5 watts, and a Prism T22 Tank holding 4.5 ml with top filling. The tank takes Prism T18 coils, and the box includes two 1.5 ohm Kanthal coils; the printed resistance range is 0.6 to 3.5 ohm, cut-off time is 10 seconds, and maximum output current is 5A. The body is aluminum alloy and zinc alloy, charging is Type-C at 5V/2A, and the page FAQ puts a typical charge at 1 to 1.5 hours. Because the coils are replaceable on their own, running costs work differently here: you swap a small coil rather than a whole pod. The dimension lines on the page read appear transposed, so no size figure is quoted for this kit.
- Pros: 3000 mAh battery is double the pod kits; 4.5 ml tank is the largest capacity here; replaceable coils rather than whole pods; two coils in the box
- Cons: no screen and no fine wattage steps, just four levels; larger format than the pod kits; dimension figures on the page read are unclear
Buy if you already like the tank-and-coil format and want the longest time between charges and refills. Skip if you want a screen, pocket-slim pods, or wattage adjustment in single-watt steps.
Buying guide
The specs that separate these six kits are battery size, pod or tank capacity, coil format, draw style, and body size. The five short sections below take each one in turn, using only the figures printed for the kits in this guide. None of them needs a phone app or an account to run.
Battery size and charging in refillable vape starter kits for smokers
Battery size is printed in milliamp hours and it sets how often you charge: the kits here run from 1000 mAh in the Ursa Nano Pro 2 to 3000 mAh in the Endura T22 Pro, with the Argus G3 leading the pod kits at 1500 mAh. Output ranges sit between 8 and 35 watts across the set.
Charging speed matters alongside size. The Xlim Pro 2 lists a full charge in about 25 to 30 minutes at 5V/2A, the Argus G3 lists 45 minutes at 5V/2A, and the Endura T22 Pro page FAQ puts its larger battery at 1 to 1.5 hours. Every kit here charges over USB-C or Type-C, so one cable type covers the set. A heavy daily user who cannot charge at work should weight the 1500 mAh Argus G3 or the 3000 mAh T22 Pro; a light user who charges nightly can pick on size and draw instead.
Pod capacity and filling style
Pod capacity runs from 2 ml in the Xlim Pro 2 and Argus G3 to 3 ml in the Caliburn G4 and Wenax Q2, with the Ursa Nano Pro 2 at 2.5 ml between them and the T22 Pro tank at 4.5 ml above them all. Capacity also decides how bulky the device body has to be, since the pod or tank sits inside its outline.
Filling style affects daily tidiness. Top-fill designs, on the Xlim V3 pods, Argus V2 pods, the Wenax Q2 pods as listed, and the T22 Pro tank, let you fill without removing the pod or tank in some cases and keep the fill port away from the base. Side-fill designs, on the Ursa cartridges and one G4 listing, use a silicone plug on the pod wall. Regional rules also change capacity: the Wenax Q2 lists a 2 ml TPD version beside its 3 ml standard pod, so check which version a listing sells.
Coil and pod options
Five of the six kits use pods with built-in coils, so a worn coil means a new pod; printed pod ranges run from 0.4 to 1.2 ohm on the Xlim, GPP, and Argus lines, and the Q Series and Ursa cartridge lines each cover their own sets. The pod ranges overlap, so most resistances can be found in more than one kit line.
Lower resistances in these ranges pair with higher wattage settings for a looser, warmer draw, while the 0.9, 1.0, and 1.2 ohm options pair with lower wattage for a tighter draw closer to a cigarette pull. The Endura T22 Pro is the exception: its tank uses replaceable Prism T18 coils, with 1.5 ohm coils in the box and a printed device range of 0.6 to 3.5 ohm, so coil swaps cost less plastic per change. Where a listing does not print the bundled pod resistances, as with the Ursa Nano Pro 2, confirm them before ordering.
Draw style and controls
Draw activation is the closest match to smoking: the Wenax Q2 is draw-activated only, the Xlim Pro 2 draws by inhale with a button reserved for settings, and the G4 and Argus G3 offer both auto-draw and a fire button. Screens then decide how much of that control you can see at a glance.
Control depth runs the other way. The T22 Pro has no screen and four fixed power levels. The Ursa Nano Pro 2 shows the basics on a 0.42 inch OLED screen, the Wenax Q2 and G4 step up to 0.85 inch class displays, the Argus G3 fits a 0.96 inch TFT color screen, and the Xlim Pro 2 shows wattage, resistance, battery percentage, and puff count on a 0.56 inch color screen. Airflow sliders on the Xlim Pro 2, G4, and Wenax Q2 let you set draw tightness directly on the device.
Size, weight and pocket carry
Printed sizes cluster tightly: lengths from 94.6 mm for the Wenax Q2 to 114.98 mm for the Caliburn G4, and the Ursa Nano Pro 2 is the thinnest at 14.8 mm; the Caliburn G4 is the lightest printed weight at 54.7 g against 67 g for the Xlim Pro 2. Weight is printed for only two of the six kits.
Two kits in this guide have no usable printed size: the Argus G3 page read lists no dimensions, and the T22 Pro page read prints dimension lines that appear transposed. Treat that as a pre-order check rather than a flaw in the devices themselves. For a shirt-pocket kit, the short Wenax Q2 and thin Ursa Nano Pro 2 read best on paper; for a desk or car kit, the bigger T22 Pro format is easier to handle and harder to lose.
FAQ
Short answers to the questions these six kits raise most often, drawn from the kit contents and spec lists on the pages read for this guide. Where a page does not print an answer, the reply says so plainly. If a figure is not printed for a kit, the answer says so rather than guessing.
Which of these kits has the largest battery?
The Innokin Endura T22 Pro, at 3000 mAh, doubles the largest pod kit battery here. Among the pod kits, the VOOPOO Argus G3 leads at 1500 mAh, ahead of the 1300 mAh Xlim Pro 2 and Caliburn G4, the 1250 mAh Wenax Q2, and the 1000 mAh Ursa Nano Pro 2. Battery size alone does not set runtime, since wattage and draw length matter too.
Do any of these starter kits include e-liquid?
No. Every kit contents list read for this guide shows the device, pods or coils, a charging cable, and a manual, and none of them lists e-liquid in the box. Budget for a bottle of e-liquid alongside any of these kits, and check the pod or coil resistance printed for the kit when you choose a strength.
Which kits fill from the top?
On the pages read, the OXVA Xlim V3 pods, the VOOPOO Argus V2 pods, the Geekvape Wenax Q2 pods, and the Innokin Prism T22 Tank all fill from the top. The Lost Vape Ursa cartridges fill from the side, and the Caliburn G4 listings differ on fill wording, so read the exact listing before ordering that kit.
How long does a refillable pod last before it needs replacing?
The pages read for this guide do not print a pod lifespan in days for any of these kits, so no figure is quoted here. In practice the makers sell the pods and coils as consumables in multi-packs: Xlim V2 and V3 pods, GPP and G3 pods, Argus pods, Ursa cartridges, Q pods, and Prism T18 coils are all listed as ongoing ranges for these devices.
Which kit is the smallest in this guide?
On printed figures, the Geekvape Wenax Q2 is the shortest at 94.6 mm long, and the Lost Vape Ursa Nano Pro 2 is the thinnest at 14.8 mm thick. The Caliburn G4 is the lightest at 54.7 g. The Argus G3 and Endura T22 Pro have no usable printed dimensions on the pages read, so they cannot be ranked on size here.
Conclusion
Pick on the printed specs that match your day: the Argus G3 or T22 Pro for the fewest charges, the G4 or Wenax Q2 for 3 ml pods, the Xlim Pro 2 for fast charging and top filling, and the Ursa Nano Pro 2 for the slimmest body. Every kit here refills with your own e-liquid and ships complete in the box.