Key takeaways
- Five portable cooktops for cast iron, each with maker-stated cast iron compatibility, compared by wattage, pan size limits, temperature range, and total weight.
The best portable cooktops for cast iron share one trait: the maker states, in its own words, that cast iron works on the unit. All five portables here meet that test on an opened maker or maker-run listing page, and each states its wattage, temperature range, and pan rules in print on the page itself.
Quick verdict
For a single burner with the widest stated temperature span, the Nuwave PIC Gold runs from 100 to 575 degrees F and its maker lists a 50-pound load figure that suits heavy cast iron pots. For two pans at once, the Duxtop double and the Nuwave PIC Double Pro split 1,800 watts two ways.
The Duxtop 9610LS is the straightforward single: 1,800 watts, 20 power levels, and cast iron named in the maker’s own compatibility line. The Empava single is the compact entry, with the smallest stated coil and a 4.7 inch minimum pan diameter that fits small cast iron skillets.
One split runs through the whole group: stated temperature ceilings. The PIC Gold reaches 575 degrees F, the two Duxtop units and the Empava stop at 460 degrees F, and the PIC Double Pro page prints no range at all. For cast iron, which stores heat in the pan itself, control and coil fit matter more than the ceiling, but the printed figures are what they are.
| Product | Burners | Power as listed | Temperature range | Pan rule as stated |
|---|---|---|---|---|
| Duxtop 9610LS / BT-200DZ | 1 | 1,800 W, 20 levels | 100-460 degrees F | Maker names cast iron; magnet rule stated |
| Nuwave PIC Gold 30211 | 1 | 1,500 W (600/900/1,500 settings) | 100-575 degrees F | Cast iron listed by maker; 8 in heating area |
| Duxtop 9620LS / BT-350DZ | 2 | 1,800 W left, 1,000 W right | 100-460 degrees F | Magnetic base, minimum 5 in diameter |
| Empava EMPV-11EC06 | 1 | 1,800 W, 18 levels | 120-460 degrees F | Maker names cast iron; minimum 4.7 in |
| Nuwave PIC Double Pro 30604 | 2 | 1,800 W shared between zones | Maker does not state | Two 8 in zones; cast iron listed for the PIC line |
How we selected
Every unit here was read on an opened page from its maker or from a listing the maker runs. The page had to show the unit for sale, state its power and temperature figures, and give a cookware rule. For the cast iron question, the maker’s wording decides: three pages name cast iron directly, and the Nuwave units rest on the maker’s FAQ.
Units were dropped when the evidence failed. One double burner from a major brand showed out of stock on its maker’s own page, an older commercial-style burner showed sold out on the listing found for it, and one extra candidate could not be opened at all during this research round, so it is named in the notes rather than guessed at.
Weight limits matter with cast iron, and only one maker here prints one. Where a page gives no load figure, this guide does not invent one; it reports the unit’s own weight and dimensions and leaves the load question marked as unstated, because a full cast iron Dutch oven is exactly the load a buyer needs a real figure for.
Portable Cooktops for Cast Iron: The Five Picks in Detail
The picks run from single burners to doubles. Each entry sticks to its own page: wattage, temperature range, timer, pan diameter rules, and the exact cast iron wording the maker prints, so a reader can see why each unit earned its place on a cast iron list.
Duxtop Portable Induction Cooktop 9610LS
The Duxtop 9610LS states its cast iron case in one sentence on the maker’s page: the unit is compatible with induction ready cookware such as enameled iron and steel, stainless steel with a magnetic bottom, or cast iron. The maker adds its magnet rule, that a vessel is induction ready if a magnet sticks to its bottom.
Power is 1,800 watts across 20 levels from 100 to 1,800 watts, with 20 temperature ranges from 100 to 460 degrees F. A count-down timer runs in 1-minute increments up to 10 hours, the cord is 5 feet, and the unit draws 120 volts at 15 amps, the standard household circuit the maker names.
Controls are an LCD sensor-touch panel with a child lock that engages on a 3-second press, a fast boil button, and a keep warm button. The maker states the auto-pan detection shuts the unit off after 60 seconds when no cookware, or the wrong cookware, is detected, and lists ETL approval. The page does not state the unit’s weight or dimensions.
That shut-off behavior is worth a line for cast iron cooks. A heavy skillet lifted for a tilt or a shake starts the maker’s stated 60-second count, and the unit resumes only when the pan is back in place within the maker’s stated behavior. The 10-hour timer ceiling, the longest in this guide alongside its double-burner sibling, suits the slow braises cast iron is often bought for.
- Power: 1,800 W, 20 levels from 100 W
- Temperature: 100-460 degrees F, 20 ranges
- Timer: up to 10 hours, 1-minute increments
- Cast iron: named in the maker’s compatibility wording
Nuwave PIC Gold Induction Cooktop, 30211
The PIC Gold is the temperature specialist here. Its maker page states a range of 100 to 575 degrees F in 10-degree increments, the widest span in this guide, with wattage settings of 600, 900, or the default 1,500 watts for kitchens and campsites on limited circuits.
Cast iron support is stated twice by the maker. The product page FAQ describes a delayed shutoff when cookware is removed, and the maker’s PIC FAQ lists cast iron among the compatible cookware examples, then states the PIC can accommodate up to a 50-pound weight load on its surface, a figure that speaks directly to cast iron Dutch ovens.
The heating area is 8 inches, the body measures 13.75 by 12.375 by 2.625 inches, and the stated weight is 5.3 lbs at 120 volts. A 1-year manufacturer warranty is listed. For a single cast iron skillet, the combination of an 8 inch heating area, a stated load figure, and a 575 degree F ceiling is the strongest paper case in this group.
The adjustable wattage deserves its own note. The maker lists settings of 600, 900, and 1,500 watts, chosen on the unit, which lets the same cooktop run on a circuit that cannot spare the full draw. No other page in this guide prints switchable wattage; the others state one rating and leave circuit planning to the buyer.
- Power: 1,500 W, settings of 600/900/1,500 W
- Temperature: 100-575 degrees F, 10-degree increments
- Load: maker states up to 50 pounds on the surface
- Weight: 5.3 lbs, as listed
Duxtop LCD Portable Double Induction Cooktop 9620LS
The Duxtop double puts two independent heating zones on one plug. The listing states the left burner at 1,800 watts with 20 power levels from 100 to 1,800 watts and 20 temperature settings from 100 to 460 degrees F, and the right burner at 1,000 watts, each set separately on the LCD display.
The pan rule is printed plainly: magnetic bottom cookware with a minimum diameter of 5 inches, and the unit will not operate without compatible cookware. Duxtop’s own product pages state that its induction cooktops work with cast iron, so a cast iron skillet of 5 inches or more at the base meets the maker’s stated rule on both zones.
A count-down timer runs up to 10 hours, the electrical figures are 120 volts, 60 Hz, 15 amps, and the listed weight is 12.8 lbs. A child lock and auto-pan detection are named features. For a cast iron skillet on one side and a second pan on the other, this is the only Duxtop here that keeps both on a single unit.
The zone split shapes how cast iron gets used on it. The listing gives the left zone the full 1,800 watts, so the heavy skillet belongs there, while the 1,000 watt right zone suits a smaller pan or a sauce. That is the maker’s printed arrangement, not a suggestion added here, and it is the first figure to check against the size of the cast iron collection the unit will serve.
- Zones: 2, independent settings
- Power: 1,800 W left, 1,000 W right
- Pan rule: magnetic base, minimum 5 in diameter
- Weight: 12.8 lbs, as listed
Empava Portable Single Burner Induction Cooktop, EMPV-11EC06
The Empava single is the compact pick, sold by the maker on its listing page. The maker copy states the cooktop is compatible with stainless steel, cast iron, and other induction-ready cookware, and the maker’s own answers on the page add the working details a cast iron owner needs.
Those answers state a minimum cookware diameter of 4.7 inches and an internal coil of typically 4.5 to 5.5 inches, with the maker advising a thick, ferromagnetic base, naming cast iron, to spread heat sideways from that coil. The cord is stated at about 47 inches. Together those figures describe a unit aimed at small and mid-size cast iron rather than the largest skillets.
Power runs across 18 levels from 200 to 1,800 watts with a temperature range of 120 to 460 degrees F. The body is 11 inches wide, 13.78 inches deep, and 2.5 inches high, with an LED touch panel, a timer, a pause function, automatic shut-off, overheat protection, and a child lock as listed. A 120 volt plug is preinstalled, and the warranty is listed at 1 year.
- Power: 1,800 W, 18 levels from 200 W
- Temperature: 120-460 degrees F
- Pan rule: minimum diameter 4.7 in, per the maker
- Coil: 4.5 to 5.5 in, per the maker’s answer
Nuwave PIC Double Pro Induction Cooktop, 30604
The PIC Double Pro is the two-zone Nuwave. Its maker page states 1,800 watts in total, two full 8-inch induction zones that operate independently, and a patented Dynamic Wattage system that, in the maker’s description, distributes up to 1,800 watts between the zones based on real-time temperature demand.
Cast iron support comes from the maker’s PIC FAQ, opened for this guide, which lists cast iron as compatible cookware for the PIC line. Two 8-inch zones give a cast iron skillet its own zone with room for a second pan beside it, and the single-panel ceramic glass surface keeps the top in one piece across both zones.
The body measures 14.19 by 23.63 by 2.56 inches and weighs 14 lbs, with digital touch controls set into the glass and a Precision Key that the maker describes as reaching the target temperature gradually to reduce overshoot. The page does not state a temperature range for this model, so none is claimed here. A 1-year manufacturer warranty is listed.
- Zones: 2, each 8 in, independent
- Power: 1,800 W shared, dynamically distributed
- Dimensions: 23.63 in wide, 14 lbs
- Temperature range: not stated on the maker page
Buying guide
Cast iron makes three demands on a portable cooktop: the base must couple with the coil, the coil must be wide enough to heat the base evenly, and the unit must carry the weight. The points below use only the figures the five makers print, and they mark the places where a maker prints nothing.
Matching portable cooktops for cast iron pan sizes
Start with the base of the pan, not its rim. The Empava maker states a minimum diameter of 4.7 inches and a coil of 4.5 to 5.5 inches; the Duxtop double states a 5 inch minimum; the Nuwave singles and double state 8 inch heating areas or zones. A cast iron skillet whose base is near the coil size heats most evenly.
Oversize bases still work, within limits the makers describe. The Empava maker advises that a thick ferromagnetic base spreads heat sideways beyond the coil, which is the honest version of the point: a 10 inch cast iron skillet on a 5 inch coil heats, but its outer ring warms by conduction through the iron rather than by the field directly.
Weight, and the one stated load figure
Only one maker here prints a load figure. The Nuwave FAQ states the PIC can accommodate up to a 50-pound weight load, which covers a loaded cast iron Dutch oven with room to spare. The Duxtop and Empava pages print no load figure at all, and this guide does not estimate one for them.
Unit weight is a different figure and all but one page state it: 5.3 lbs for the PIC Gold, 12.8 lbs for the Duxtop double, and 14 lbs for the PIC Double Pro. A heavier unit is not a stronger unit by that fact alone; it is simply the figure that decides how the cooktop travels and stores.
Power levels and temperature control
Every unit here reaches 1,800 watts except the PIC Gold, which tops out at 1,500 watts but offers 600 and 900 watt settings for limited circuits. Temperature ceilings split the group: 575 degrees F on the PIC Gold, 460 degrees F on both Duxtop units and the Empava, and no stated range on the PIC Double Pro page.
For cast iron searing, the ceiling matters less than control at the top end, because the pan itself stores the heat. The Duxtop single offers 20 temperature ranges, the Empava 18 power levels, and the PIC Gold 10-degree increments across its span. The PIC Double Pro answers with its Precision Key, described by the maker as a gradual approach to the target temperature.
Single burner or double
A double unit shares one circuit. The Duxtop double states its split openly, 1,800 watts on the left and 1,000 on the right, while the Nuwave double moves its 1,800 watts between zones as demand changes. Either way, two cast iron pans at full sear at the same moment is more than one household circuit offers.
The singles give one pan the whole draw. For a cook whose cast iron work is one skillet at a time, the single is the simpler tool; for a cook who keeps a sauce warm beside the skillet, the double earns its width. The stated widths, 11 inches for the Empava up to 23.63 inches for the Nuwave double, decide the counter question.
Circuits, cords, and where the unit can run
Every unit here is a plug-in appliance, and the pages state the circuit plainly. Both Duxtop units name 120 volts at 15 amps, the PIC Gold names 120 volts with its switchable wattage, and the Empava arrives with its 120 volt plug preinstalled, as its listing states.
Cord figures are printed on two pages: 5 feet on the Duxtop single and about 47 inches in the Empava maker’s answer. Those numbers decide placement more than the body size does, because the pan must sit centered on the coil while the plug reaches the outlet. The Nuwave pages print no cord length, which is one more figure to settle before relying on either unit in an RV or at a campsite table.
Timers, locks, and shut-off features
Long timers suit cast iron braises. Both Duxtop units state count-down timers up to 10 hours, far beyond the Empava’s listed timer, whose page gives no duration figure. The PIC Gold page describes a delayed shutoff when cookware is removed, and the Duxtop single states a 60-second auto-pan shut-off in its own wording.
Child locks appear on the Duxtop single, the Duxtop double, and the Empava listing. None of these features changes how cast iron cooks; they change how the unit behaves around a busy counter, and they are worth weighing only after the coil size, load figure, and temperature range have been settled.
FAQ
Cast iron raises the same questions on every portable cooktop: will the pan register, how wide is the coil, and can the glass carry the pot. These answers come from the maker pages behind this guide, and each one names the maker whose wording it rests on.
Do portable cooktops for cast iron need a flat pan base?
Yes, in the makers’ own terms. Duxtop states its rule as a magnet test, that a vessel is induction ready if a magnet sticks to its bottom, and the Empava maker advises that the base of the pan sit flat against the glass and be centered on the zone. A warped or ridged base breaks the contact both makers describe.
Which of these units states a weight limit?
Only Nuwave. The maker’s PIC FAQ states the PIC can accommodate up to a 50-pound weight load on the cooktop surface, in an answer about canning. The Duxtop and Empava pages behind this guide print no load figure, so this guide reports none for them rather than estimating what their glass can carry.
Can a large cast iron skillet work on a small coil?
Within the limits the makers print, yes. The Empava maker, answering for a coil of 4.5 to 5.5 inches, advises that a thick ferromagnetic base such as cast iron spreads heat sideways and reduces hot spots, and recommends gradual preheating on a medium setting. The outer ring of a wide skillet heats by conduction, not by the field.
What pan sizes do the makers require?
The stated minimums are 4.7 inches from the Empava maker and 5 inches on the Duxtop double listing. The Nuwave units state their heated geometry instead: an 8 inch heating area on the PIC Gold and two 8 inch zones on the Double Pro. The Duxtop single page gives no minimum diameter, only its magnet rule.
Do the double units run both zones at full power?
No, and both makers say so in their own way. The Duxtop double lists fixed zone figures, 1,800 watts on the left and 1,000 watts on the right, on one 15 amp circuit. The Nuwave Double Pro states a shared 1,800 watts that its Dynamic Wattage system distributes between the zones as demand changes.
How should cast iron be set down on the glass?
The makers’ advice is consistent. The Empava maker states the pan base should be smooth, sit flat against the glass, and be centered on the zone, and recommends preheating gradually on a medium setting. Duxtop’s magnet rule adds the check before the pan reaches the glass: if a magnet sticks to the base, the vessel is induction ready by that test.
Conclusion
For one cast iron pan and a stated load figure, the Nuwave PIC Gold is the strongest paper pick. For two pans, the Duxtop double and the PIC Double Pro split their power openly. The Duxtop single and the compact Empava cover the standard circuit and the small skillet, each with cast iron named by its maker.