Key takeaways
- Six induction ready skillets and fry pans compared by stated material, size, weight, oven limits and care, from cast iron and carbon steel to clad nonstick.
A single pan is where induction cooking proves itself daily, in eggs, sears and sauces. This guide compares six pans for induction cooktops, one cast iron skillet, two carbon steel fry pans, two clad stainless pans and two nonstick builds among them, using only the material, size, weight, oven and care facts each page states about its own pan.
Quick verdict
The six pans divide by material before anything else. Cast iron and carbon steel ask for seasoning and hand care and give back bare metal cooking surfaces, while the clad stainless and nonstick pans trade that routine for layered construction. Every page here states its induction fit directly, in a heat source list or a compatibility line.
- For the heaviest sear pan: the Lodge 12 Inch Seasoned Cast Iron Skillet, 7.69 lb of iron.
- For French carbon steel: the de Buyer MINERAL B PRO 11 inch, 3mm thick with a beeswax finish.
- For the largest carbon steel surface: the Matfer Bourgeat 11 7/8 inch Black Steel Frying Pan.
- For clad stainless with no coating: the Eater x Heritage Steel 12 inch Fry Pan, 5-ply throughout.
- For nonstick over stainless: the Scanpan CTX 11 Inch, oven listed to 500 degrees F.
- For nonstick on a 5-ply body: the Sardel 12 Inch Non-Stick Skillet, made in Italy.
Comparison table
The table sets the six pans side by side on the facts their pages print: material as stated, diameter, weight where stated, the oven position exactly as the page gives it, and the care routine. Two pages state no oven temperature figure at all, and the table records that silence rather than filling it from another listing.
| Product | Material as stated | Size | Oven position as stated | Care as stated |
|---|---|---|---|---|
| Lodge 12 Inch Seasoned Cast Iron Skillet L10SK3 | Cast iron, seasoned with vegetable oil | 12 in.; 7.69 lb | Oven, grill and campfire use listed | Hand wash, dry, oil |
| de Buyer MINERAL B PRO Carbon Steel Fry Pan 11 in. | Iron 99%, carbon 1%; beeswax finish | 11 in.; 8.3 in. cooking surface; 4.6 lbs | Oven listed as heat source; no temperature stated | Hot water rinse, dry, light oil; never dishwasher |
| Matfer Bourgeat 11 7/8 in. Black Steel Frying Pan 062005 | Black carbon steel | 11 7/8 in.; 4.69 lb | Suited to high temperatures per listing | Season before first use |
| Eater x Heritage Steel 12 in. Fry Pan | 5-ply clad; 304 stainless surface, aluminum core, 400 series exterior | 12 in. | Oven and broiler use stated; no temperature stated | Hand washing recommended |
| Scanpan CTX 11 Inch Nonstick Fry Pan | Nonstick interior, stainless exterior, multi-layer | 11 in.; 3.9 lb | Up to 500 degrees F | Hand wash |
| Sardel 12 Inch Non-Stick Skillet Pan 1004 | 5-ply stainless body, non-stick coating with steel particles, honeycomb layer | 12 in.; 10 in. cooking surface | Up to 480 degrees F | Not stated on opened page |
How we selected
Every pan comes from a page opened for this guide, and every page states the induction pairing itself: a heat source list that names induction, a line reading Induction Ready, or a statement covering all stovetops including induction. Pans whose induction status conflicted across sources, and there were two, were left out rather than argued in.
The set angle belongs to the companion cookware guide, so this list holds single pans only, and none of the non-stick pans from the earlier batch is repeated here. The result is a material spread on purpose: one cast iron, two carbon steels, two clad stainless builds and nonstick represented on both a stainless exterior pan and a 5-ply body.
Specs are printed as the pages give them, including the gaps. The de Buyer page lists the oven as a heat source with no temperature maximum, and the Heritage Steel page states oven and broiler use with no figure in the opened text, so both pans appear here without an oven number. A missing figure is reported, never replaced.
Maker claims are kept as maker claims. Where a page says a pan is made without PFAS, or a coating is PFOA-free, the article attributes the line to the maker and adds nothing to it. Weights, dimensions and cooking surface diameters are copied from the same opened pages, so a reader can compare the 8.3 inch cooking surface of one pan against the 12 inch rim of another honestly.
Pans for induction cooktops in iron and carbon steel
Three pans cook on bare metal that the owner seasons and maintains. Iron and carbon steel are magnetic by nature, so their induction fit is stated plainly on each page, and what separates them is shape and routine: a heavy American skillet, a thick French fry pan with a beeswax finish, and a larger black steel pan built for high heat work.
Lodge 12 Inch Seasoned Cast Iron Skillet L10SK3
The maker page states the skillet is seasoned with 100% natural vegetable oil and is compatible with any stovetop including induction, plus oven, grill and campfire use. It is made in the USA. Dimensions are 18.0 inches long, 2.25 inches high and 12.56 inches wide, and the weight is 7.69 lb, the heaviest figure in this guide by a wide margin.
Care is the classic cast iron routine as the maker prints it: hand wash, dry, and oil. The warranty is the Lodge Made Right Warranty. The maker also states the skillet is made without PFAS, a claim this guide attributes to the maker and leaves there, since the cooking surface itself is simply seasoned iron with nothing else on it.
On an induction cooktop the pan’s flat, heavy base is the whole story: a full 12 inches of iron sitting on the burner, holding heat through a sear and moving to the oven without a stated limit in the way. The trade is written in the weight and the care line; this is a two-handed pan that never sees a dishwasher, by the maker’s own instructions.
Who it is for: cooks who sear, bake cornbread and want one pan for stovetop, oven and grill. The limits are the 7.69 lb weight and the hand wash, dry and oil routine after every use. Buy if bare iron is your preferred surface and the heft feels like quality. Skip if you want a pan you can lift with one wrist or put in the dishwasher.
de Buyer MINERAL B PRO Carbon Steel Fry Pan 11 in.
The maker page gives the body composition directly: iron 99 percent, carbon 1 percent, with a cast stainless steel riveted handle built with a Heat Stop design. The finish is a beeswax coating that the maker says to wash off before first use, after which the pan is seasoned. The pan is made in France.
The stated size is 11 inches in diameter with an 8.3 inch cooking surface, 3mm thickness and a weight of 4.6 lbs. The heat source list on the page names electric, gas, induction, ceramic, BBQ grill and oven. Care is a hot water rinse, drying and a light coat of oil; the maker says never to use the dishwasher and to avoid soap on the pan.
The page lists the oven among the heat sources but publishes no oven temperature maximum, so this guide states none; owners who need a number should read the current maker page before roasting at high heat. What the page does promise is the classic carbon steel arc: a pan that starts with a wax coat and builds its own cooking surface over months of use.
Who it is for: cooks who want the French carbon steel format, thick at 3mm, with a stainless handle that suits oven finishing. The limits are the seasoning routine, the soap and dishwasher prohibitions, and the unstated oven ceiling. Buy if you enjoy maintaining a pan that changes with use. Skip if your kitchen routine depends on soaking pans or machine washing them.
Matfer Bourgeat 11 7/8 in. Black Steel Frying Pan 062005
The listing describes a black carbon steel pan, 11 7/8 inches in diameter and 2 1/8 inches high, with the spec table giving an 11.75 inch diameter and a weight of 4.69 lb. A steel strip handle is fitted, and the listing states the pan suits gas, electric, ceramic, halogen and induction hobs, with an Induction Ready line in its fields.
The maker direction on the page is to season the pan before first use. The listing also describes carbon steel as suited to high temperatures, and notes that the pan’s thin walls release heat rapidly once it leaves the heat, a working trait cooks feel when a pan answers a burner change quickly instead of coasting on stored heat.
That responsiveness is the Matfer argument on induction, where the cooktop itself changes temperature instantly: a pan that sheds heat fast pairs with a burner that cuts heat fast. At just under 12 inches it is also the widest carbon steel cooking surface here, a crepe and searing format as much as a frying one, and the weight stays under five pounds.
Who it is for: cooks who want the largest stated carbon steel surface and a pan that reacts quickly on and off the burner. The limits are the same carbon steel rules as the de Buyer, seasoning first and hand care after. Buy if diameter and responsiveness top your list. Skip if you want the thicker 3mm build and the stainless handle of the French rival above.
Clad stainless and nonstick pans
Three pans build their cooking surface into layered metal instead of bare iron or steel. One is clad stainless with no coating, one puts a nonstick interior over a stainless exterior, and one infuses its coating into a 5-ply stainless body with a honeycomb layer. Their induction fit is stated as a magnetic exterior or an all-cooktops line.
Eater x Heritage Steel 12 in. Fry Pan
The maker page states a 5-ply fully clad body: a 304 stainless steel cooking surface, a three-layer aluminum core, and a 400 series ferritic stainless exterior whose higher iron content makes it magnetic and induction-ready. The maker’s FAQ states that all of its cookware is induction compatible, and this is the 12 inch fry pan in that line.
The maker states oven and broiler use for the pan; the opened page text gives no temperature figure, so none is printed here. Hollow stainless handles are designed to stay cool on the stovetop, with the maker’s own note that they can still get hot during extended high heat or oven use, so a mitt stays part of the routine. Hand washing is recommended.
The pan is made at the maker’s factory in Clarksville, Tennessee, with clad steel sourced from South Korea, and it carries a lifetime repair-or-replace warranty. The maker states there are no chemical coatings and that the pan is made without PFAS, PFOA or PTFE, claims this guide attributes to the maker; the cooking surface is the stated 304 stainless steel.
Who it is for: cooks who want clad stainless performance in a single 12 inch pan, made in the USA, with no coating to manage. The limits are hand washing and an oven figure the opened page does not print. Buy if you are building a small set of clad pans one at a time. Skip if you want a nonstick surface for eggs or a printed oven number before purchase.
Scanpan CTX 11 Inch Nonstick Fry Pan
The listing states an 11 inch fry pan with a nonstick interior, a stainless steel exterior and an even-heat multi-layer construction, induction compatible and listed for all cooktops. The stated oven limit is 500 degrees F, the pan is made in Denmark, the weight is 3.9 pounds, the lightest in this guide, and the care listed is hand wash.
That combination, a stainless outside with a nonstick inside, answers two induction kitchen habits at once: the exterior takes the magnetic field and the knocks of daily use, while the interior releases eggs and fish without the seasoning routine the carbon steel pans demand. The trade is the hand wash line and a coating that asks for ordinary care with utensils and heat.
The listing carries a chemical disclosure for the coating, and this guide repeats no claim about the coating beyond the listing’s own description of a durable nonstick surface. Readers who weigh coating questions heavily have the maker’s disclosure on the same page as the specs, which is the right place to read it before deciding.
Who it is for: cooks who want nonstick ease in a pan that still looks and handles like stainless, at the lightest stated weight here. The limits are hand washing and the 11 inch size, a step down from the 12 inch pans around it. Buy if eggs, fish and crepes are your daily work. Skip if you want bare metal you can season, scour and keep for decades.
Sardel 12 Inch Non-Stick Skillet Pan 1004
The listing, carrying the maker’s own description, states a 5-ply stainless steel body with a non-stick coating infused with stainless steel particles and a honeycomb layer, and the maker claims the coating is PFOA-free. Hollow heat-resistant handles are stated to stay cool, and the pan is listed for all stovetops including induction.
The stated oven limit for this non-stick pan is 480 degrees F, with the maker’s stainless pieces listed at 500 degrees F on the same page. Overall size is 21.5 by 12.5 by 2.0 inches including the handle, and the cooking surface is 10 inches across inside a 12 inch rim. The pan is made in Italy, by a third-generation Italian family business as the listing tells it.
The honeycomb build is the maker’s answer to the usual nonstick worry: steel particles and a raised layer stand between the food and the coating, in the maker’s telling, while the 5-ply body underneath behaves like the clad pans in this guide. Whether that trade suits a kitchen depends on how hard the pan will be worked with metal tools and high heat.
Who it is for: cooks who want a 12 inch nonstick pan with a clad body under the coating and a stated 480 degrees F oven limit. The limits are a 10 inch cooking surface inside the wide rim and coating care over the long term. Buy if the honeycomb design answers your hesitation about nonstick. Skip if you prefer the uncoated Heritage Steel build in the same size class.
Buying guide: pans for induction cooktops by material
Material decides almost everything about living with one of these pans: how it is seasoned or washed, how much it weighs full of food, and how it answers an induction burner’s instant changes. The five checks below walk the decision in the order the pages present the facts, from the surface itself to the care routine at the sink.
Pick the surface before the size
Bare surfaces, the Lodge iron and the two carbon steels, are seasoned by the owner and hold no coating at all. Clad stainless, the Heritage Steel, cooks on stated 304 stainless. Nonstick, the Scanpan and the Sardel, trades bare metal for release. Decide which surface family fits your cooking first; later specs read differently in each family.
Compare cooking surfaces, not rim diameters
Rim sizes here run 11 to 12 inches, but the stated cooking surfaces are smaller: 8.3 inches on the de Buyer and 10 inches on the Sardel, with overall lengths of 18.0 inches for the Lodge and 21.5 inches for the Sardel including handles. Measure your burner and your oven door against those figures, not the headline diameter.
Read the oven line exactly as printed
Two pans print figures, 500 degrees F for the Scanpan and 480 for the Sardel. The Lodge lists oven use without a number, and the de Buyer and Heritage Steel pages state oven use with no temperature in the opened text. If you finish dishes in a hot oven daily, a printed figure is a real feature; treat its absence as a question for the current page.
Weigh the pan, then the routine
Stated weights run from 3.9 pounds for the Scanpan to 7.69 lb for the Lodge, with both carbon steels near 4.6 lb. Weight is only half the routine: iron and carbon steel want washing by hand, drying and oil, the Heritage Steel wants hand washing, and the nonstick pair want gentle handling. Choose the routine you will still be doing in a year.
Treat coating claims as maker claims
Three pages make composition claims: the Lodge states its skillet is made without PFAS, Heritage Steel states its pan is made without PFAS, PFOA or PTFE, and Sardel claims a PFOA-free coating. Each is printed here as the maker’s own line, which is the honest way to use them: as part of the maker’s description, not as a finding of this guide.
FAQ
These answers stay inside the six opened pages. Pan questions tend to be practical, about seasoning, oven figures and washing, and each page answers some of them in its own wording. Where a page is silent, the answer below says so instead of borrowing a rival pan’s numbers.
Which pans for induction cooktops are oven listed?
All six pages connect their pan to oven use in some form: the Lodge lists oven use outright, the de Buyer lists oven among its heat sources, the Heritage Steel maker states oven and broiler use, and the Scanpan and Sardel print figures, 500 and 480 degrees F. Only those two are printed numbers; the rest are stated uses without a temperature.
Do carbon steel pans need seasoning before use?
Yes, on both pages here. The de Buyer arrives with a beeswax coating the maker says to wash off before first use, then season, and the Matfer Bourgeat listing directs the buyer to season the pan before first use. The Lodge skillet arrives seasoned by the maker with vegetable oil, which is the cast iron version of the same idea.
Can any of these pans go in the dishwasher?
Not on these pages. The de Buyer maker says never to use the dishwasher, the Lodge routine is hand wash, dry and oil, the Scanpan lists hand wash, and Heritage Steel recommends hand washing. The Sardel page states no cleaning method in its opened text, so this guide claims none for it either way.
Which pan is the lightest and which is the heaviest?
By stated weight, the Scanpan CTX is the lightest at 3.9 pounds and the Lodge skillet the heaviest at 7.69 lb, with the de Buyer at 4.6 lbs and the Matfer Bourgeat at 4.69 lb between them. The Heritage Steel and Sardel pages print no weight in the text opened for this guide, so they stand outside that ranking.
What is the difference between the two nonstick pans?
Construction and figures. The Scanpan CTX pairs a nonstick interior with a stainless exterior in an 11 inch pan, oven listed to 500 degrees F, made in Denmark. The Sardel builds its coating into a 5-ply stainless body with a honeycomb layer, at 12 inches with a 10 inch cooking surface, oven listed to 480 degrees F, made in Italy.
Conclusion
Start with the surface: seasoned iron from Lodge, carbon steel from de Buyer or Matfer Bourgeat, clad stainless from Heritage Steel, or nonstick from Scanpan or Sardel. Then check the printed oven line, the cooking surface diameter and the care routine against your habits. Each pan here states its induction fit on its own page, in its own words.