Key takeaways
- Compare six consoles with motorized faders from Midas, Yamaha, Allen & Heath, DiGiCo and Behringer, with fader counts, layers, recall and DSP compared.
Motorized faders are what make a digital console feel instant: recall a scene and every level jumps to its stored place. The strongest mixers with motorized faders pair that recall with enough faders to limit layer diving. These six consoles from Midas, Yamaha, Allen & Heath, DiGiCo and Behringer all state motorized faders in their specifications.
Quick verdict
The Midas M32 LIVE is the balanced pick, with 25 long-life faders and deep show control. The Allen & Heath SQ-7 offers the most faders here at 33. The Yamaha DM7 Compact is the compact powerhouse, the Avantis the dual-screen option, the DiGiCo SD12 96 the touring flagship, and the Behringer WING the stereo-first design.
| Mixer | Channels | Motorized faders | Screens | Standout trait |
|---|---|---|---|---|
| Midas M32 LIVE | 40 inputs | 25 x 100mm, rated 1 million cycles | 7-inch TFT | Show control and SD recording |
| Yamaha DM7 Compact | 72 channels | 16 | 12-inch + 7-inch touch | Compact 96 kHz powerhouse |
| Allen & Heath SQ-7 | 48 inputs, 36 buses | 33 x 100mm, 6 layers | 7-inch touch | Most faders in this group |
| Allen & Heath Avantis | 64 inputs, 42 buses | 24 x 100mm, 6 layers | Dual 15.6-inch touch | Dual screens, dLive add-ons |
| DiGiCo SD12 96 | 96 channels | 26 touch-sensitive | Dual 15-inch touch | Touring-grade processing depth |
| Behringer WING | 48 stereo channels | 24 x 100mm, 3 sections | 10.1-inch touch | Stereo-first Sources workflow |
How we selected these mixers with motorized faders
Every console here states motorized faders in its published specifications, with fader counts listed where makers publish them. The group spans mid-format desks for venues and touring, a compact single-bay console, and two large-format flagships, so the trade between fader count, footprint and processing depth stays visible in every entry.
Each entry covers who the console suits, how its faders and layers are organized, the processing and networking behind them, and the limits to weigh. Figures such as cycle ratings, latency and dynamic range are the makers’ own published numbers for each model, quoted so you can compare like with like.
The six mixers with motorized faders worth shortlisting
Motorized faders earn their keep in three moments: scene recall, layer changes, and sends on faders, where the surface redraws itself around the job. The six consoles below organize those moments differently, from simple fader banks to fully configurable sections, so read for the layout that matches how you actually mix a show.
Midas M32 LIVE
The M32 LIVE suits venues, touring acts and studios that want a mid-format desk with serious show control. Its faders are a headline feature rather than a commodity part: Midas rates them for a million cycles, and the surface around them, shaped by a Bentley Motors designer, keeps layers, scenes and sends within easy reach during a fast changeover.
The 25 premium 100mm Midas Pro motorized faders glide between layers and flip to sends with the Fader Flip button, so monitor mixes are adjusted on the same faders as the main mix. Total recall covers preamps and faders alike, and the Cue List automates the show with 500 cues drawing on 100 scenes and 100 snippets. In the studio the faders double as DAW automation controllers through Mackie Control and HUI, and M32 apps add remote control over Ethernet.
The engine runs 40 input channels with 32 Midas preamps, 25 time-aligned and phase-coherent mix buses, eight DCA groups and six mute groups. Forty-bit floating-point processing with Cirrus Logic converters delivers a stated 112 dB dynamic range, and eight stereo DSP engines run more than 50 processors, including modeled classics. Recording is covered by a 32×32 USB interface and 32 channels of dual SD card recording, while AES50 and ULTRANET expand the system toward 96 channels with P16 personal mixers.
The limits are the single 7-inch screen in a group with dual-screen rivals and a fader count that still needs layers on a 40-input show. Expansion stageboxes and personal mixers are separate purchases.
- Pros: million-cycle fader rating; deep cue and scene automation; SD multitrack recording onboard; DAW fader automation.
- Cons: one screen; layers needed for full input count; expansion hardware costs extra.
- Buy if: you run cued shows or split time between live work and the studio.
- Skip if: you want the maximum fader count under your hands at all times.
Yamaha DM7 Compact
The DM7 Compact suits engineers who need a large channel count from a small footprint: corporate shows, theaters and broadcast rigs where a full-size desk will not fit the booth. It carries the DM7 series engine and Rivage PM lineage into a single bay, and its split mode lets one engineer cover two jobs from the same surface.
Sixteen motorized faders serve 72 mixable channels, organized through the 12-inch and 7-inch touchscreens and a touch-and-turn knob. Yamaha’s interface adapts to the operator, and remote control extends to DM7 Editor on a computer and DM7 StageMix on an iPad. AI assist features, including an assistant that suggests gain, EQ and dynamics settings, speed up setup when soundcheck time is short.
Processing runs at up to 96 kHz with 16 mic preamps and 16 analog outputs onboard. The bus structure offers 48 mixes, 12 matrixes, two stereo buses and two cue mixes, with 64 assignable premium processing slots, 16 FX slots and four assignable inserts per channel. A 144×144 Dante interface on dual locking Ethernet ports handles expansion, an 18×18 USB interface works with VST Rack, and a DAW remote mode adds transport control. An internal dual power supply covers redundancy without an external unit.
The limits are the 16 faders themselves, which mean constant layer work on big shows, and a feature depth that takes time to learn. It is also the newest design here, so used bargains do not exist yet.
- Pros: 72 channels in a single bay; dual touchscreens; Dante 144×144 built in; redundant power supply inside.
- Cons: 16 faders for 72 channels; deep menus to learn; premium positioning.
- Buy if: space is tight but the show is big, or one engineer covers two roles.
- Skip if: you want one fader per channel for a large input list.
Allen & Heath SQ-7
The SQ-7 suits engineers who hate layer diving: with 33 motorized faders it puts more channels under hands at once than anything else here, which is why it anchors so many venue and house of worship installs. It is the flagship of the SQ series and shares its engine with the smaller SQ models, so show files and habits transfer across the range.
The 32+1 motorized faders are 100mm units across six layers, with motorized action serving sends on faders, graphic EQ fader flip and mix recall. Drag-and-drop strip assignment, custom naming and color coding on the channel displays, and Chromatic metering keep a wide surface readable. SQ MixPad adds wireless control for the engineer, and SQ4You lets up to eight performers run their own monitor mixes.
The XCVI FPGA engine runs 48 input channels and 36 buses at 96 kHz with latency under 0.7 ms. Every input carries a high-pass filter, a gate with sidechain, a 4-band parametric EQ and a compressor with a parallel path, while mixes add parametric and 28-band graphic EQ. Eight stereo FX engines draw on the RackExtra library, DEEP plug-ins can be added, and two automatic mic mixers combine into a single 48-channel unit for conferences. SLink expansion reaches 48 mic inputs, a card port accepts Dante or Waves, SQ-Drive records to USB, and a 32×32 USB interface runs at 96 kHz.
The limits are a single 7-inch screen on a wide surface and DEEP processing sold as add-ons. Allen & Heath has also launched an SQ+ successor generation, so buyers should confirm which generation a given listing offers.
- Pros: 33 motorized faders; 96 kHz with very low latency; strong monitor and conference tools; wide expansion family.
- Cons: single screen; DEEP plug-ins cost extra; successor generation now exists.
- Buy if: you mix busy shows and want maximum hands-on channel access.
- Skip if: dual screens matter more to you than fader count.
Allen & Heath Avantis
The Avantis suits engineers stepping up from the SQ class who want the dLive ecosystem’s processing and twin large screens without moving to a modular flagship. It is a standalone console with its engine inside, aimed at touring, broadcast and installation work where 64 channels and fast visual feedback matter more than raw fader count.
Twenty-four 100mm motorized faders, touch-sensitive and illuminated, run across six layers for 144 assignable strips in two banks. The Continuity UI links those faders and encoders to dual 15.6-inch Full HD touchscreens, so a touch on screen and a hand on a fader always address the same channel. A FastGrab sidebar keeps key parameters one touch away, and Avantis MixPad, OneMix and Custom Control apps extend control off the surface.
The XCVI core runs 64 input channels and 42 configurable buses at 96 kHz with 0.7 ms latency. Local I/O is modest at 12 mic/line inputs and 12 outputs, because the design expects expansion: an SLink port and two 128×128 I/O ports accept Dante, Waves, MADI and gigaACE cards plus remote stageboxes. Twelve RackExtra FX slots have dedicated returns, 16 DCA groups organize the mix, automatic mic mixing covers up to 64 channels across zones, and the dPack upgrade, pre-installed in the bundle verified for this roundup, adds Dyn8 engines, DEEP compressors and a valve preamp model.
The limits are the small local I/O count for a console of this class and a size and weight that end one-person carry. The dPack bundle’s dealer stock also varied at research time.
- Pros: dual Full HD screens tied to the faders; 144 assignable strips; deep card expansion; dLive-class add-on processing.
- Cons: only 12 local mic inputs; large and heavy; dPack is a paid upgrade outside bundles.
- Buy if: you want dLive-style workflow and screens in a self-contained console.
- Skip if: you need many local inputs without adding a stagebox.
DiGiCo SD12 96
The SD12 96 suits touring and theater engineers working in the DiGiCo ecosystem who need flagship processing in a compact frame. It runs the Stealth Core 2 software family of the larger SD consoles, so sessions and workflows move between desks, and its surface is built for speed: two big screens with the channel controls aligned beside them.
Twenty-six touch-sensitive motorized faders split across two worksurface sections, each fader assignable to any channel type, with two assignable master faders. Touch sensitivity means the console knows which fader your hand is on and shows that channel’s details instantly. Dual 15-inch touchscreens carry the overview, and the assignable master section borrows from DiGiCo’s largest desks.
The SD12 96 mixes 96 channels at 48 or 96 kHz on Super FPGA processing. Every input and output carries full processing: delay, high-pass and low-pass filters, parametric EQ and dynamics, with graphic EQs, multiband compression and tube-style saturation in the toolkit. Stereo effects include reverb, delay, chorus, pitch shift and harmonic enhancement. Buses assign freely as auxiliaries or groups, a 12×8 matrix and dual solo buses complete the routing, and local I/O of eight mic/line inputs, eight line outputs and eight AES/EBU pairs grows through dual MADI ports and two DMI card slots.
The limits are the small local I/O count, which makes a stage rack effectively mandatory, and a depth of configuration that rewards trained operators. It is also the most specialized desk here, aimed squarely at professional touring work.
- Pros: 96 channels with full processing everywhere; touch-sensitive faders; dual 15-inch screens; deep card and MADI expansion.
- Cons: minimal local I/O; steep learning curve; pro touring positioning.
- Buy if: you tour or run theater shows inside the DiGiCo workflow.
- Skip if: you want a self-contained desk with plenty of local inputs.
Behringer WING
The WING suits engineers who think in stereo and in sources rather than in inputs: playback-heavy shows, broadcast and worship rigs where most feeds arrive as stereo pairs. Its whole interface is built around that idea, and its fader sections can be reshaped per operator, even splitting the surface between two engineers working the same show.
Twenty-four motorized 100mm faders sit in three separately configurable sections of twelve, eight and four. The four-fader section can run independently as a second work area, and a Custom Controls section adds assignable encoders, buttons and displays. A 10.1-inch capacitive touchscreen on an adjustable swivel anchors the surface, and the WING Co-Pilot app lets a second person label and patch from the stage.
The console handles all 48 channels and 28 buses as mono, stereo or mid-side with no linking penalty. Its Sources workflow attaches name, icon, color, gain and phantom settings to each source and carries them to any channel, and every channel has an alternate input for redundant players or backup microphones. Eight Midas Pro preamps sit onboard, three AES50 ports move up to 144 signals with M32 and X32 compatibility, a StageCONNECT port adds 32 channels over one XLR cable, the included WING-LIVE card records 64 channels to dual SD cards, and a 48×48 USB interface adds DAW control. Sixteen true-stereo FX processors and modeled channel processing complete the spec.
The limits are a workflow that takes commitment to learn, since it breaks with conventional channel thinking, and stock that was thin across dealers at research time, with backorders reported.
- Pros: fully stereo architecture; configurable fader sections for two operators; huge network I/O; 64-channel SD recording included.
- Cons: unconventional workflow to learn; dealer stock was limited at research time.
- Buy if: your show is stereo-heavy and you want a surface shaped around sources.
- Skip if: you prefer a traditional channel-per-fader layout and instant familiarity.
Buying guide: choosing mixers with motorized faders
A motorized fader is only useful if the console around it recalls, layers and labels well. The headings below cover the decisions that matter after the headline feature: how many faders your show really needs, what the motors must survive, and how recall, screens and expansion change daily work on these six desks.
Count faders against your layer tolerance
Fader counts here run from 16 to 33, and none of them shows every channel at once on a big show. The honest question is how often you switch layers mid-song. Engineers who ride several vocal and instrument levels together want more faders on the top layer.
Engineers who mix in sections, or run cued theater, tolerate layers well because the motors reset the surface at every scene. Configurability softens the math. Banks that let you park mains, DCAs and key channels on a fixed section keep the most-grabbed faders permanently in reach.
Check fader quality and ratings
Motorized faders are moving parts that cycle thousands of times per show. A published cycle rating, such as the million-cycle figure on the M32 LIVE’s faders, is the clearest durability signal a maker offers. Touch sensitivity is the other quality marker on a modern surface.
It lets the console display the touched channel’s details and guards against accidental value jumps when a hand brushes a fader during a layer change. Throw length matters for fine work. Every fader in this group is a 100mm unit where the maker publishes the length, which gives finer resolution around unity than short-throw faders.
Recall is the real feature
The motors exist to serve recall: scenes, cues and snippets that restore levels, pans and processing together. Compare the show-control depth, not just the fader count. Cue lists that step through hundreds of entries suit theater; simple scene recall suits a venue band.
Per-parameter recall protection, where offered, keeps a guest engineer’s saved levels from being overwritten by a global recall. DAW control is the studio side of the same coin. Consoles whose faders follow Mackie Control or HUI automation turn mix recall into mix production.
Screens and faders must agree
On a layered surface, the screen’s job is to prove which layer you are on before your hand moves. Dual screens, channel displays, color coding and illuminated fader slots all serve that proof. When you evaluate a desk, flip layers and ask how many independent signals confirm the assignment.
Scribble strips, fader color and screen highlight are the usual signals. Two or more agreeing signals prevent the classic error of riding the wrong channel. Touch-sensitive faders add one more signal, since touching a cap can summon its channel to the screen without moving its level.
Plan expansion before you need it
Three of these consoles carry only 8 to 12 local mic inputs and expect network stageboxes to do the heavy lifting. That is a deliberate design, and it works well, but the stagebox belongs in the purchase plan from day one. Check the network your venue already runs.
Dante, AES50, SLink and MADI are the options across this group, so confirm the console speaks your network natively or through a card you have allowed for. Finally, confirm stock and generation with the seller. One console here has a successor generation on sale, and another showed widespread backorders at research time.
FAQ
Short answers on fader counts, recall and durability, drawn from the six consoles above. The pattern to notice is that motorized faders are a system feature: their value depends on the recall engine, the layer design and the screens that surround them, not on the motors alone.
Why do motorized faders matter on a digital mixer?
They make recall physical. When a scene loads, every fader moves to its stored level, so the surface always shows the true mix and you can grab any fader without a jump. They also enable sends on faders and fader flip modes, where the same faders temporarily control monitor sends.
They can just as easily flip to graphic EQ bands, then return to channel levels exactly as they were. Without motors, a recalled mix and the surface disagree until you pick up each fader, which slows changeovers and invites mistakes in the dark.
How many motorized faders do I need?
Match the count to how many levels you ride at the same moment. A 16-fader desk mixes a large show through layers and suits one engineer working in sections. Desks with 24 to 26 faders keep a typical band plus its buses in near reach on the top layers.
The 33-fader SQ-7 covers most input lists on two layers. Cued theater and broadcast work leans on recall more than on fader count. If two engineers share one surface, a configurable layout, such as the WING’s independent four-fader section, can matter more than the total.
Do motorized faders wear out?
They are rated in cycles, and the clearest figure here is the M32 LIVE’s million-cycle rating, which its maker describes as three times the rating of other leading consoles. Dust and spilled drinks are the usual killers rather than cycle counts, so covers and cases matter.
Touch-sensitive designs also reduce wear from accidental drags, since the console registers a touch before any movement happens. On a used desk, run every fader through a full recall and watch for stutters or dead spots before money changes hands.
Can motorized faders control my DAW?
Yes, on several of this group. The M32 LIVE controls a DAW through Mackie Control and HUI with full fader automation, the WING’s 48×48 USB interface emulates the same protocols, and the SQ-7 and DM7 Compact both offer DAW remote functions for compatible software.
That turns the live console into a studio control surface, with the faders following your automation lanes during mixdown. Check the protocol your DAW prefers and whether transport control is included, since implementations vary from full control to basic fader and mute support.
Are more faders always better?
No. More faders widen the surface, add weight and raise the chance of grabbing the wrong strip in a dark booth. A compact desk with fast layers, clear channel displays and good screens can outpace a wide desk with poor labeling on a real show night in a real venue.
The right count is the one that keeps your most-used channels and buses visible during the busiest minute of your show, and no larger. That is why this group spans 16 to 33 faders: the correct answer depends on the show, the room and the operator, not on a league table.
Conclusion
The best mixers with motorized faders here all recall instantly, so choose by layout and workflow: the M32 LIVE for show control, the DM7 Compact for power in a small frame, the SQ-7 for fader count, the Avantis for twin screens, the SD12 96 for touring depth, and the WING for stereo-first work at any scale.