Key takeaways
- Six mixers for Virtual DJ with support stated by the makers or by Atomix, from a pocket controller to a battery party unit with its own speaker and lights.
Virtual DJ runs almost any MIDI controller, so the mixers for virtual dj below are the ones whose support is stated in writing by the maker or by Atomix: three bundle a VirtualDJ LE license in the box, and three sit on the official supported hardware list for use with a full license for home and party rigs.
Quick verdict
The six split by license first and hardware second. If you want VirtualDJ running out of the box, the three LE bundles come first; if you already hold a full VirtualDJ license, the three list-supported controllers trade bundle value for stronger hardware in two cases.
| Product | VirtualDJ support stated | Decks | Main output | Standout point |
|---|---|---|---|---|
| Numark Party Mix Pro | VirtualDJ LE in the box | 2 | Built-in speaker | Battery, lights and 80 W peak speaker |
| Vonyx Spin 200 | Virtual DJ LE licence in the box | 2 | 3.5 mm | Stems pad mode and stems EQ control |
| Vonyx Loop 300 | VirtualDJ LE V8 included | 2 | 3.5 mm | Full 3-band EQ and color effects |
| AlphaTheta DDJ-FLX2 | Atomix supported hardware list | 2 | 3.5 mm | Smart Fader transitions, Bluetooth |
| Hercules DJControl Starlight | Atomix entry names VirtualDJ | 2 | 1/8 inch | 0.5 kg with RGB light base |
| Numark DJ2GO2 Touch | Atomix supported hardware list | 2 | 1/8 inch | 0.34 kg pocket format |
None of the six is a club booth controller with balanced outputs, and that is the honest shape of this keyword: stated VirtualDJ support clusters on home, party and practice hardware, plus all-in-one party units with their own sound and light.
How we selected
Support had to be stated, not assumed. A controller qualified only if its maker’s own manual or box contents name a VirtualDJ edition, or if Atomix itself lists the model in its official VirtualDJ hardware list or describes it as a VirtualDJ controller in that list’s entry text.
That rule cut several famous controllers whose makers document only Serato, rekordbox or DJUCED support, however well they can be mapped by hand. Hardware facts for each pick come from the maker’s manual, the maker’s specification, or a full listing reproducing them, and license claims go no further than the pages state.
Every model also had to be a current, orderable product rather than a legacy unit surviving on old stock. That second filter matters with this software, because Atomix’s list reaches back through many generations of hardware: a controller can be genuinely supported and still be the wrong recommendation if its maker has moved on and only secondhand units remain in circulation.
Six mixers for virtual dj with stated support
The three bundled-license models lead, because they remove the license question entirely, followed by the three list-supported models. Each entry separates the support evidence from the hardware, so you can see exactly what is documented and what you would still need to buy.
Numark Party Mix Pro
The Party Mix Pro is the all-in-one pick: a two-deck controller built into a battery speaker cabinet with a beat-synced light show, and the strongest support paperwork here, because Numark’s own user guide walks through setup under the heading Getting Started with VirtualDJ LE.
The guide’s box contents include a software download card, and its setup steps begin by locating the VirtualDJ LE installation card. Atomix’s hardware list entry for the model also states VirtualDJ LE V8 included. Hardware from the same guide: output power of 80 W peak through a 3 inch tweeter and an 8 inch woofer, party light modes cycled from the top panel, Bluetooth A2DP streaming with a range of up to 98 feet, and battery life of up to 10 hours when fully charged.
Control layout covers two decks with jog wheels, a scratch button, pitch faders, sync, performance pads for hot cues, loops and samples, gain plus high and low EQ per channel, and a crossfader. Connections include a 1/4 inch microphone input with its own volume, a 1/8 inch aux input, a link output for chaining a second unit, and a 1/8 inch headphone output. The cabinet measures 15.0 by 13.0 by 18.1 inches and weighs 27.5 pounds.
Two party details from the guide are worth noting: a cradle on the top panel holds the phone or tablet running the show, and a device charge port can charge that connected device over USB while the unit is powered on. The light modes include reactive patterns that follow the music and a simple off setting for rooms where the show is not wanted.
Buy if your VirtualDJ sets happen at house parties and outdoor gatherings where bringing speakers is the usual hassle. Skip if you play through a venue PA and need balanced outputs, a booth feed or 3-band EQ, because this is a self-contained party system first and a booth controller second.
Vonyx Spin 200
The Spin 200 is the stems-ready budget pick: a dual DJ MIDI controller whose manual lists a Virtual DJ LE licence in the package contents and instructs you to download and install the supported DJ software, VirtualDJ LE, during setup. It is also the only one of the six whose EQ section doubles as a stems mixer.
The manual’s control list shows why it suits VirtualDJ’s current feature set. The eight performance pads switch between Hot Cue, Loop, Stems, Sampler, Beat Jump, Loop Roll, Saved Loop and Pad FX modes, and the high and low EQ knobs carry shift functions that adjust the vocal, instrumental and beat portions of the audio, which is direct hardware control of stem separation. A filter knob per deck, slip mode, sync and tempo faders round out the layout.
Connections stay simple: a USB-C port carries power and MIDI control to a PC or Mac, the unit is USB bus-powered, the master output is a 3.5 mm jack, and headphone outputs come in both 3.5 mm and 6.3 mm sizes. Atomix’s entry adds that the Spin series carries a built-in sound card and that every model in the series comes complete with Virtual DJ LE software.
Buy if you want to learn VirtualDJ with stems control on hardware that costs party-controller money. Skip if you need a microphone input, balanced or RCA master outputs, or published dimensions and weight, none of which this package provides.
Vonyx Loop 300
The Loop 300 is the fuller-featured sibling in the same bundled-license family: Atomix’s hardware list entry states VirtualDJ LE V8 included and describes the Loop series as coming complete with VirtualDJ software, ready to plug in and start mixing right away.
The same entry sets out the hardware: two touch-sensitive scratch wheels, eight large performance pads, and a full 3-band EQ, where the Spin 200 manages with two EQ bands plus a filter. Performance features listed include hot cues, loops, sampler, FX and beat jump, plus color effects covering filter, echo, reverb and flanger. Master and headphone outputs are both 3.5 mm, and the entry confirms support for Windows and Mac computers.
Published detail beyond that entry is thin: the entry does not give dimensions, weight or an audio resolution figure, so this is a pick you choose on its feature list and license bundle rather than on measured specifications. Its maker sells the Loop line as the step up from the Spin line for DJs who want more creative tools on the same software bundle.
Buy if you want the bundled VirtualDJ LE license with a complete 3-band EQ and the larger pad set for performance work. Skip if published dimensions, weight and audio figures matter to your decision, or if you need outputs beyond a single 3.5 mm master socket.
AlphaTheta DDJ-FLX2
The DDJ-FLX2 is the polished beginner controller on the list-supported side: Atomix includes it in its official VirtualDJ hardware list, while AlphaTheta’s own software list covers rekordbox, djay and Serato, so VirtualDJ use here runs on a full license rather than a bundle.
The hardware explains its popularity. Smart Fader adjusts volume, BPM and bass automatically as you move the crossfader, Smart CFX applies effects from a knob, and the performance pads cover Hot Cue, Pad FX and sampler modes. Published figures include a signal to noise ratio of 102 dB and total harmonic distortion of 0.006 percent over USB, a frequency response of 20 Hz to 20 kHz, one 3.5 mm master output and one 3.5 mm headphone output.
Power is USB bus power through a single USB Type-C port at 5 V and 500 mA, and Bluetooth 4.2 Low Energy connects mobile devices with a stated range of about 10 meters in unobstructed conditions. The body measures 383.2 by 208 by 48.2 mm and weighs 1.2 kg, the lightest full-layout controller in this roundup.
Because the maker’s own software list includes djay and rekordbox on phones and tablets as well as computers, the FLX2 also suits DJs who mix from a phone at small events and only open VirtualDJ on the laptop at home. Streaming service access through those companion apps is part of the maker’s pitch for the model, though it sits outside the VirtualDJ support that earns it this place.
Buy if you already own or plan to buy a VirtualDJ license and want the most refined small controller here, especially for phone and tablet sets. Skip if you want VirtualDJ included in the price, a microphone input, or anything larger than a 3.5 mm master output.
Hercules DJControl Starlight
The Starlight is the tiny light-show controller: Atomix’s entry for it says it packs all the features needed to mix and scratch with VirtualDJ, with a built-in audio interface for headphone pre-listening, which makes its support statement the most explicit of the three list-supported picks.
Hercules sells it as a Serato DJ Lite controller, and that software is the one in the box. The specification lists a built-in audio interface at 24-bit and 44.1 kHz, a 1/8 inch master output and a 1/8 inch headphone output, two decks with touch detection jog wheels, and four pads with four modes covering hot-cue, loop, fx and sampler. Each deck gets a bass EQ and filter knob and a volume knob, and the base carries RGB strobe effect backlighting.
Dimensions are 340 by 49 by 100 mm and the listing weight is 0.5 kg, so it travels in the same bag as the laptop. There is no microphone input and no full EQ section; transitions lean on the single bass and filter knob per deck.
Buy if you want a pocketable second controller for practice and small gatherings, and you hold a VirtualDJ license for it. Skip if you need 3-band EQ, a microphone channel, or outputs that plug straight into a PA without adapters.
Numark DJ2GO2 Touch
The DJ2GO2 Touch is the backup and travel pick: a pocket controller that Atomix carries in its official hardware list, small enough at 8.6 by 31.4 by 1.6 cm and 0.34 kg to sit in front of a laptop keyboard as a spare rig or a set-preparation tool. It continues Numark’s long-running pocket format line.
Numark’s user guide lists capacitive touch jog wheels, a crossfader, channel gain and master gain knobs, cue gain and PFL cue buttons, a browse knob with load buttons, sync and pitch faders per deck, and four pad buttons whose mode switches between Hot Cue, Auto Loops, Manual Loops and Sampler. Auto loops trigger loops of 1, 2, 4 and 8 beats from the pads.
Audio runs at a supported sample rate of 44.1 kHz and 16 bit through a 1/8 inch main output and a 1/8 inch headphone output, with a 1/8 inch to stereo RCA cable in the box. Power and data travel over a mini-USB port, and the guide describes the unit as class-compliant and plug-and-play.
Buy if you want the smallest stated-support controller for travel, backup duty or preparing sets on the move. Skip if 16-bit audio, mini-USB or miniature controls bother you, or if this would be your only controller for full-length gigs.
Buying guide
With support confirmed, the remaining choices are about licenses, outputs and control depth. Work through the four checks below in order and the six controllers sort themselves quickly, because each one wins a different combination of them. None of them requires guesswork, because each difference is printed in a manual or a specification.
Licenses: what mixers for virtual dj actually need
VirtualDJ downloads free, but controllers are licensed hardware in Atomix’s model. Three of these six include a VirtualDJ LE edition in the box, which is the zero-friction route: install, activate with the supplied key or card, and mix. LE editions are cut-down versions, so check the feature list against your ambitions before relying on one.
The other three need a paid VirtualDJ license tier to run without restriction. That cost belongs in your comparison even though no prices appear here: a cheaper controller plus a license can land near a bundled model. If you already hold a license from an earlier setup, the list-supported three become the better hardware value.
Outputs and cue monitoring
Every controller here cues properly, with a headphone output fed from a built-in interface, which is the non-negotiable part. The differences sit on the master side: the Party Mix Pro plays through its own speaker and offers a link output, while the other five send the master out on a single 3.5 mm or 1/8 inch socket.
A mini-jack master is fine for powered speakers at home and small parties, and the DJ2GO2 Touch even includes the RCA adapter cable. It is a weak point for venue work, where balanced XLR or at least RCA pairs are the norm and a booth output feeds your monitor. None of the six offers a booth output, so plan on the house system or your own speakers accordingly. If you regularly play rooms with a proper PA, treat these six as home and party tools and keep a larger controller for venue nights.
Pads, jog wheels and stems
Pad count and modes decide how much of VirtualDJ you can drive without the mouse. The Spin 200 leads here with eight pads and eight modes including a dedicated Stems mode, plus shift-layer EQ knobs that ride the vocal, instrumental and beat stems. The Loop 300 matches the eight pads with its own FX and beat jump set.
Jog wheels split by size and feel: the FLX2 and the Vonyx pair offer full-size touch wheels for scratching practice, while the Starlight and DJ2GO2 Touch shrink them for portability. If scratching is central to your sets, prioritize wheel size; if pads and stems are, the Spin 200 is the interesting outlier in this group.
Crossfaders and channel faders are present on all six, so basic blend technique transfers between them, and every model offers sync for tempo matching while you learn to beatmatch by ear. The Party Mix Pro adds the most conventional mixer extras of the group, with per-channel gain and a two-band EQ shaped for a room rather than a booth.
Size, weight and power
The spread is extreme: 0.34 kg for the DJ2GO2 Touch against 12.5 kg for the Party Mix Pro, with the FLX2 at 1.2 kg and the Starlight at 0.5 kg between them. Five of the six run on USB bus power from the computer, so a laptop battery is the limit at a picnic; only the Party Mix Pro carries its own battery, rated by Numark at up to 10 hours.
Match the format to the job: pocket controllers for backup and preparation, mid-size controllers for home and party rigs, and the all-in-one when the speaker and lights are the point of the booking. Check the stated dimensions against your desk or booth shelf before ordering, especially the Party Mix Pro’s tall cabinet.
FAQ
Answers to the license and hardware questions that come up most with this software, kept to what the makers and Atomix state on the pages behind this guide rather than forum experience. License tiers change over time, so treat the tier names here as a starting point and confirm the current terms before a paid booking.
Does VirtualDJ work with any MIDI controller?
In principle the software can be mapped to most MIDI controllers, but this guide only counts support that is stated in writing: a bundled VirtualDJ edition in the maker’s documents, or a place in Atomix’s official hardware list. Custom user mappings exist for many other controllers, with quality that varies by author.
What is VirtualDJ LE?
LE is the limited edition of VirtualDJ that some manufacturers bundle with hardware. The Party Mix Pro includes it via a download card described in Numark’s guide, and the Vonyx Spin 200 and Loop 300 include a license or registration card in the box. It activates with the supplied key and covers the bundled controller.
Can I use one of these for paid gigs?
That depends on the license tier, not the hardware. LE editions and home-tier licenses carry use restrictions in Atomix’s licensing terms, while the full professional tier is the one aimed at paid work. Read the current terms for the tier you hold before taking a controller here to a paid booking.
Which of these can play without a laptop?
None of the controllers plays standalone: all six control software on a computer, phone or tablet. The Party Mix Pro comes closest to independence because its speaker, lights and battery are built in, but it still needs a connected device running VirtualDJ LE or the DJ Player app for its decks.
Do any of these have a microphone input?
Only the Party Mix Pro, which provides a 1/4 inch microphone input with its own volume knob on the top panel. The other five have no microphone channel in their published specifications, so party hosts who need a mic should start with the Numark or plan a separate mixer.
Conclusion
If VirtualDJ is your program, start with the license: the Party Mix Pro, Spin 200 and Loop 300 include a VirtualDJ LE edition, while the FLX2, Starlight and DJ2GO2 Touch pair with a full license. Gigging DJs should then weigh outputs, since most of these six cue and play through a single 3.5 mm socket.