Key takeaways
- Six small sinks for tiny home kitchens, compared on stated overall dimensions, bowl size, depth, gauge and cabinet minimums from maker specification sheets.
A tiny home kitchen gives the sink a few square feet of counter and one narrow cabinet, so a sink that is two inches too wide costs storage the home does not have. This guide compares kitchen sinks for tiny homes on stated overall dimensions, bowl sizes and cabinet minimums only. The cabinet minimum decides first, and style comes after it.
Quick verdict
The six sinks below run from a 13 in Kraus bowl to a 23-1/2 in Elkay Crosstown. The small four suit a single-bowl tiny kitchen or a prep role, the Blanco adds a square 15 in bowl, and the Crosstown is the largest model here that still fits a 27 in cabinet.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Kraus Standart PRO KHU101-13 | Undermount single bowl | Smallest stated cabinet fit | 13 x 15 x 8 in, minimum cabinet 15 in | Bowl is 11 x 13 in |
| Elkay Lustertone Classic ELUH1111 | Undermount single bowl | Square footprint, shallow bowl | 14 x 14 x 6-3/8 in, 2 in drain | 2 in drain is a bar-size fitting |
| Elkay MFD101 bar sink | Undermount bar sink | Deep bowl, small width | 13-1/2 x 18-1/2 x 9 in, bowl 12 x 17 in | 18 gauge steel |
| Kraus KBU17 | Undermount bar and prep | Shallow pressed bowl | 15-1/8 x 12-3/4 in, depth 6-7/8 in | Needs 24 in front to back in cabinet |
| Blanco Quatrus R15 Bar 519545 | Undermount bar sink | Square 15 in bowl | Bowl 15 x 15 x 8 in, minimum cabinet 21 in | Sheet does not state overall dimensions |
| Elkay Crosstown EFRU211510 | Undermount single bowl | Only sink in a tiny home | 23-1/2 x 18-1/4 x 10 in, bowl 21 x 15-3/4 in | Needs a 27 in minimum cabinet |
How we selected
Every model below was read on a maker specification sheet opened for this guide, and the dimensions in the text are the dimensions on those sheets. Models from the earlier compact kitchen roundup were not repeated, and no sink appears here on the strength of a search result or a catalog line.
Tiny home kitchens add constraints a normal kitchen does not have. The cabinet run is short, so the stated minimum cabinet size decides whether the sink fits at all. Counter depth is often standard but the worktop length is not, so front-to-back and left-to-right figures both matter. Many tiny homes also sit on a trailer or a foundation with limited under-floor plumbing room, which makes bowl depth and drain position practical questions, not styling ones. The set below was chosen to spread across those constraints: the smallest cabinet fit, the shallowest bowls, one deep narrow bowl, and one full-duty bowl for homes where this is the only sink.
Kitchen sinks for tiny homes: the six models
Five of the six are bar and prep class bowls under 16 in wide, and one is a 23-1/2 in single bowl for a tiny home that needs a real main sink. All six are undermount and single bowl, and every one states a minimum cabinet size on its maker sheet, from 15 in up to 27 in.
Kraus Standart PRO KHU101-13 undermount sink
The KHU101-13 is the smallest full-spec sink in this set: overall dimensions of 13 x 15 in, a bowl of 11 x 13 in and a depth of 8 in. Its sheet states a required minimum cabinet size of 15 in left to right and 20 in front to back, the lowest cabinet figure here.
Who it is for: a tiny home with a short counter run, where the sink cabinet may be the only base cabinet in the kitchen. Why it fits the keyword: the 15 in cabinet minimum leaves room beside the sink for a drawer bank or a compact fridge, and the 8 in depth is a working depth rather than a rinsing-only depth. The sheet lists 16 gauge stainless steel construction, a rear center-set drain with a 3-1/2 in opening, and NoiseDefend undercoating with sound dampening pads. Included accessories on the sheet are the Strainer ST-1, a drain cap STC-2, a towel, a cut-out template and mounting hardware, and the sheet lists cUPC certification to ASME A112.19.3 and CSA B45.4.
The limit is bowl area. An 11 x 13 in bowl takes plates, glasses and a saucepan, but a skillet lies at an angle and a sheet pan does not fit, so a tiny home that bakes often will feel the size every day.
- Pros: smallest cabinet minimum in the set at 15 in; 16 gauge steel; strainer, cap, template and hardware included
- Cons: 11 x 13 in bowl limits cookware; single bowl only; undermount needs a solid counter edge
- Buy if: cabinet width is the binding constraint and the cooking load is light
- Skip if: the sink must take sheet pans or a stockpot with room to spare
Elkay Lustertone Classic ELUH1111 undermount sink
The ELUH1111 is a square 14 x 14 in bowl with a depth of 6-3/8 in, the joint shallowest in this set. The maker sheet states 18 gauge 304 stainless steel, a Lustrous Satin finish, sides and bottom pads, and a minimum cabinet size of 18 in. Its cutout template is listed as included on the sheet.
Who it is for: a tiny home where the counter is short in both directions and a square bowl suits the layout better than a long one. Why it fits the keyword: the bowl measures 11-1/2 x 11-1/2 x 6-3/8 in, so it gives a true square working area, and the shallow depth leaves more of the small cabinet usable for storage. The sheet lists a template in the box and undermount brackets sold separately. The drain is the detail to plan around: the sheet states a 2 in drain size at the rear right, which is a bar-size fitting rather than the 3-1/2 in opening the other models here state.
The limit follows from that drain. A 2 in opening does not take the standard strainer and disposal fittings the 3-1/2 in models accept, and the sheet lists a matching 2 in drain fitting as an optional accessory, so the plumbing plan has to be built around the smaller fitting from the start.
- Pros: true square footprint; shallow bowl frees cabinet storage; 304 grade steel stated; template included
- Cons: 2 in drain limits fitting choices; brackets sold separately; 18 gauge steel
- Buy if: a square, shallow bowl fits the layout and the plumbing is planned for a 2 in drain
- Skip if: a garbage disposal or standard 3-1/2 in strainer setup is part of the plan
Elkay MFD101 undermount bar sink
The MFD101 pairs a narrow 13-1/2 in width with the longest bowl in the small group, 12 x 17 in, and a 9 in depth. The maker sheet states 18 gauge 304 stainless steel, a Radiant Satin finish and a minimum cabinet size of 18 in. It is the deep, narrow pattern in this set.
Who it is for: a tiny home kitchen arranged along one wall, where width is scarce but the counter run has depth to give. Why it fits the keyword: the 17 in bowl length takes a roasting pan or a row of glasses that the square bowls cannot, while the 13-1/2 in width keeps the cabinet narrow. The drain is 3-1/2 in at the rear center, and the sheet lists full spray sides and bottom with sides and bottom pads for sound deadening, plus a cutout template number for the fabricator. In a small open-plan home, where the sink sits a few feet from the bed and the sofa, stated sound deadening is a practical feature rather than a luxury.
The limit is gauge and shape. At 18 gauge the steel is thinner than the 16 gauge Kraus and Crosstown models here, and the long narrow bowl suits pans and trays better than a wide mixing bowl or a big pot.
- Pros: 17 in bowl length in a 13-1/2 in width; 9 in depth; rear center 3-1/2 in drain; spray and pad sound deadening stated
- Cons: 18 gauge steel; narrow bowl for wide pots; bar sink classification
- Buy if: the layout is long and narrow and pans matter more than pots
- Skip if: 16 gauge steel is a firm requirement
Kraus KBU17 undermount bar and prep sink
The KBU17 is a pressed undermount bar and prep sink with overall dimensions of 15-1/8 x 12-3/4 in and a bowl of 13-1/8 x 10-3/4 in. At 6-7/8 in deep it is the joint shallowest bowl here, and its sheet states 18 gauge stainless steel construction with a center-set drain.
Who it is for: a tiny home where the sink is a prep and rinse point next to a compact range, and a second full sink is not in the plan or the budget of space. Why it fits the keyword: the footprint is small in both directions, the drain is a standard 3-1/2 in center-set opening, and the sheet lists NoiseDefend undercoating and sound dampening pads. Included accessories are the Strainer ST-1, a cut-out template, mounting hardware and a towel, and the sheet lists cUPC certification to ASME A112.19.3 and CSA B45.4.
The limit is the cabinet depth figure. The sheet states a required minimum cabinet size of 18 in left to right and 24 in front to back, and that second figure is deeper than the sink itself suggests, so a shallow tiny home cabinet run has to be measured front to back before this model is chosen.
- Pros: small footprint both ways; standard 3-1/2 in drain; strainer and hardware included; shallow bowl
- Cons: 24 in front-to-back cabinet requirement; pressed rather than handmade build; 18 gauge steel
- Buy if: the cabinet run is a full depth run and the sink role is prep and rinse
- Skip if: the base cabinets are shallower than the stated 24 in front-to-back figure
Blanco Quatrus R15 Bar sink, SKU 519545
The Quatrus R15 Bar is the square-bowl alternative to the Elkay square model: its specification sheet states a bowl of 15 x 15 x 8 in, a minimum cabinet size of 21 in, and a cut-out of 15.25 x 15.25 in, with a satin finish listed for SKU 519545. The sheet lists undermount installation only for this model.
Who it is for: a tiny home that can give the sink a 21 in cabinet and wants the largest square bowl in this set. Why it fits the keyword: the 15 in square bowl at 8 in deep is a genuine working bowl for dishes and produce, the sheet states undermount installation only, and the drain hole is listed as compatible with 3.5 in strainers or waste flanges, so standard fittings apply. The sheet lists installation instructions and a cut-out template as included, with a sink grid and a CapFlow strainer cover as optional accessories, and lists ASME A112.19.3-2017 and CSA B45.4-17 in its codes and standards.
The limits are documentation gaps. The sheet opened for this guide does not state the overall sink dimensions or a steel gauge, and it gives a cut-out below counter depth of 8.79 in, so the fabricator works from the cut-out and bowl figures rather than an overall size.
- Pros: largest square bowl here; standard 3.5 in drain hole; template and instructions included; 8 in bowl depth
- Cons: overall dimensions not stated on the sheet; gauge not stated; grid and strainer cover are optional extras
- Buy if: a 21 in cabinet is available and a square bowl suits the worktop
- Skip if: the order needs a stated overall dimension and gauge from the maker sheet
Elkay Crosstown EFRU211510 undermount sink
The Crosstown is the full-duty option: overall dimensions of 23-1/2 x 18-1/4 x 10 in and a bowl of 21 x 15-3/4 x 10 in. The maker sheet states 16 gauge 304 stainless steel, a Polished Satin finish, Sound Guard sound deadening and a 27 in minimum cabinet size.
Who it is for: a tiny home where this is the only sink and it has to do everything, from sheet pans to a full dish load. Why it fits the keyword: at 23-1/2 in it is still far smaller than a standard 30 to 33 in kitchen sink, yet the 21 in bowl takes the cookware the bar-class bowls above cannot. The drain is 3-1/2 in at the rear center, the sheet lists mounting hardware included and a template included, and the compliance line lists ASME A112.19.3 and CSA B45.4. Optional accessories on the sheet include a hardwood cutting board sized to the bowl and drain fittings, which suits a tiny kitchen where the board doubles as counter space.
The limit is the cabinet. A 27 in minimum cabinet is a large share of a tiny home counter run, and the 10 in depth takes most of the cabinet height, so storage under this sink is limited to the space beside the bowl and the trap.
- Pros: real main-sink bowl at 21 x 15-3/4 in; 16 gauge 304 steel; hardware and template included; rear center drain
- Cons: 27 in cabinet minimum; 10 in depth eats under-sink storage; heaviest commitment of counter length here
- Buy if: this is the only sink in the home and a 27 in cabinet can be spared
- Skip if: the counter run cannot give up 27 in of cabinet to the sink
Buying guide
In a tiny home the sink decision is really a storage decision. Work through cabinet size first, then the role the sink has to cover, then depth against under-counter storage, then the drain fitting, because each of those can rule a model out before style enters the discussion.
Start with the cabinet when choosing kitchen sinks for tiny homes
The stated minimums in this set run from 15 in for the Kraus KHU101-13 to 27 in for the Crosstown, with the two Elkay bar models and the Kraus KBU17 at 18 in and the Blanco at 21 in. Measure the cabinet the sink will actually sit in and match it to the stated figure.
Two models add a second direction. The KHU101-13 sheet states 20 in front to back and the KBU17 sheet states 24 in front to back, on top of their left-to-right minimums. Tiny home cabinets are often shallower than standard, so the front-to-back figure can be the one that fails. A sink that fits the width but not the depth is not a fit, and the time to learn that is before the counter is cut, not during the install.
Decide whether the sink works alone or as a prep bowl
A tiny home with one sink needs the Crosstown class: a bowl over 20 in long that takes daily cookware. A tiny home with a prep bowl beside a compact range can run one of the 13 to 15 in models and give the saved counter length back to worktop. The bowl figures make the gap between the two plans plain.
Be honest about the cooking load. One or two people cooking simple meals generate a small dish load that a 13 in bowl handles in passes. Batch cooking, preserving and baking generate pans and trays that a small bowl handles badly, and no layout trick changes the bowl area. The sheet figures make the comparison concrete: the KHU101-13 bowl is 11 x 13 in, the Crosstown bowl is 21 x 15-3/4 in, and the difference between those two rectangles is the difference between washing in passes and washing in one go.
Trade bowl depth against under-counter storage
Depths here run from 6-3/8 in on the Elkay ELUH1111 and 6-7/8 in on the Kraus KBU17 up to 10 in on the Crosstown. In a tiny home the space under the bowl is often the only tall storage in the kitchen, so a shallow bowl can be worth more than a deep one.
Depth also decides what stands in the bowl. A 6-3/8 in bowl rinses glasses and plates well but a tall stockpot towers over the rim and splashes, while the 9 in MFD101 and 10 in Crosstown bowls contain tall items. Match the depth to the tallest item washed weekly, and remember the trap and drain tailpiece sit below the bowl, so the usable cabinet height is the cabinet height minus the bowl depth and the plumbing below it.
Check the drain size before the plumbing order
Five of the six models state a 3-1/2 in drain opening. The Elkay ELUH1111 states a 2 in drain at the rear right. That single figure changes the strainer, the tailpiece and whether a disposal can be fitted at all, so it belongs in the first round of decisions.
Drain position matters in a short cabinet too. Rear drains, stated on the ELUH1111, the MFD101 and the Crosstown, push the trap toward the back wall of the cabinet and leave the front free for a drawer or a bin. The KBU17 uses a center-set drain, which centers the plumbing in the cabinet. In a tiny home, where the sink cabinet often doubles as the only under-counter storage, that placement decides what else fits beside the trap.
FAQ
The answers below use only the figures on the six maker sheets behind this guide and general tiny home planning. If a figure is not on a sheet, the answer says so, because in a small kitchen a guessed dimension usually means a cabinet that has to be rebuilt.
What is the smallest cabinet any sink here fits?
The Kraus KHU101-13 states the smallest minimum: 15 in left to right and 20 in front to back. The next step up is 18 in, stated by the Elkay ELUH1111, the Elkay MFD101 and the Kraus KBU17, although the KBU17 also asks for 24 in front to back on the maker sheets.
Those are maker minimums for the sink itself. A real tiny home cabinet also has to hold the trap, the water lines and often a small water heater or a bin, so a cabinet at the exact minimum leaves little working room for the installer. Where the layout allows it, one cabinet size up from the stated minimum makes the install and later repairs far easier.
Can a bar sink serve as the only sink in a tiny home?
For a light cooking load, yes, and the deeper bar models here, the 9 in MFD101 with its 12 x 17 in bowl, come closest to main-sink duty. The trade is cookware size: sheet pans and large skillets will not sit flat in any of the bar-class bowls in this set.
The makers classify these models as bar and prep sinks, and their bowl dimensions back that up. A tiny home that cooks daily for a family is better served by the Crosstown at 23-1/2 in, which is still compact by normal kitchen standards, than by a bar bowl asked to do a main sink job.
Why do two sheets state a front-to-back cabinet size?
Because an undermount sink hangs inside the cabinet in both directions. The KHU101-13 sheet states 15 in left to right and 20 in front to back, and the KBU17 sheet states 18 in left to right and 24 in front to back, so both directions have a maker figure to check.
Tiny home and RV-style cabinets are often built shallower than the standard kitchen depth, which is exactly where a front-to-back minimum bites. The other sheets in this set state a single minimum cabinet size, so for those models the front-to-back clearance has to be checked against the bowl depth and the template instead.
Are kitchen sinks for tiny homes always undermount?
All six models verified for this guide are undermount, which suits the solid counters most tiny homes use and keeps the small worktop free of a rim. That is a pattern in this verified set, drawn from maker sheets, rather than a rule for every tiny home kitchen.
Drop-in sinks exist in these sizes and can suit a thin or lightweight counter that cannot carry an undermount bowl and its clips. None is listed here because each model in this guide had to be verified on an opened maker page for this keyword, and the pages opened for small sinks were undermount models.
Conclusion
Match the cabinet first: the KHU101-13 fits a stated 15 inch minimum, the bar models sit at 18 to 21 in, and the Crosstown needs 27 in but works as the only sink. In a tiny home, the stated dimensions are the decision, and every model here publishes them. Choose on those published figures, and the sink will fit the home as planned.