Updated Nov 15, 2026· 16 min read

Key takeaways

  • Six induction-ready griddles compared on stated size, weight, thickness and heat limits: carbon steel, cast iron, nitrided steel and enameled cast iron picks.

An induction cooktop only heats the metal that sits over its zones, so a griddle for this surface needs a flat magnetic base and a maker who states the pairing plainly. This guide compares six griddle for induction cooktops options, every one with an induction statement on its own page, across carbon steel, cast iron, nitrided steel and enamel.

Quick verdict

The six griddles divide by surface before anything else. Four are bare seasoned metal that the owner maintains with oil, one is nitrided steel that needs no seasoning routine, and one is enameled cast iron that skips seasoning entirely. Stated weights run from 5.23 lb to 25 pounds, so handling differs as much as cooking.

  • For the lightest full-size steel plate: the Misen 18 inch, 5.23 lb with a 17.6 by 12.1 inch cooking surface.
  • For the thickest steel and the most stored heat: the Baking Steel Griddle, 3/8 inch thick at 25 pounds.
  • For a pre-seasoned carbon steel plate under 10 lb: the Made In Carbon Steel Griddle, 4 mm at 9.9 lbs.
  • For the classic reversible cast iron format: the Lodge Double Play LDP3, 16.75 by 9.5 inches.
  • For the largest stated cooking surface: the Victoria 20 by 14 inch reversible griddle.
  • For no seasoning at all: the All-Clad Enameled Cast Iron Plancha, listed for oven use to 650 degrees F.

Comparison table

The table sets the six griddles side by side on the facts their pages print: material, stated size, stated weight, the heat or oven figure exactly as listed, and the care routine. One maker states a maximum heat figure rather than an oven figure, and the table keeps that wording honest instead of converting it.

Product Material as stated Size as stated Weight Heat listing as stated
Made In Carbon Steel Griddle 4 mm Dutch carbon steel, pre-seasoned twice Spans two burners; 24 in. length 9.9 lbs Max heat 1200 degrees F
Baking Steel Griddle Low carbon steel, pre-seasoned with organic flaxseed oil 14 by 18 in.; 3/8 in. thick 25 lb Oven, grill and stovetop use listed
Lodge Double Play Reversible Griddle LDP3 Cast iron, pre-seasoned with vegetable oil 16.75 by 9.5 in.; 0.75 in. thick 9.4 lb Oven use listed; no temperature figure stated
Victoria Rectangular Cast Iron Reversible Griddle Cast iron, preseasoned with flaxseed oil, 3 layers 20 by 14 in. cooking surface 18.1 lb All heat sources listed, high heat
Misen 18 inch Carbon Nonstick Griddle 3-ply nitrided carbon steel with aluminum core 20.1 by 13 in.; cooking surface 17.6 by 12.1 in. 5.23 lb Heat listed up to 1100 degrees F
All-Clad Enameled Cast Iron Plancha, 11 by 19 inch Enameled cast iron, matte interior 11 by 19 in.; 24.8 in. overall 11.24 lb Oven use up to 650 degrees F

How we selected

Every griddle here comes from a product page opened for this guide, and every page states the induction pairing itself: a compatibility line naming induction, a heat source list that includes it, or a direct answer to an induction question. Griddles whose own maker pages exclude induction were left out, however well known the brand.

That filter removed real products. One major maker’s double burner griddles are listed by that maker for all stovetops except induction, so they do not appear here. A griddle a cooktop cannot detect is not a griddle for that cooktop.

The six survivors span the formats induction owners actually shop: two carbon steel plates, two reversible cast iron griddles, one nitrided steel griddle with an aluminum core, and one enameled cast iron plancha. Every one is built to sit across two burners or one large zone.

Maker claims stay maker claims. Where a page says a steel is lighter than cast iron by a stated percentage, the article attributes the line to the maker. Figures are copied from the opened pages, including one page that prints two different dimension lines; that conflict is flagged in the product section.

Griddle for induction cooktops in bare metal

Four griddles cook on bare metal that the owner seasons and maintains: two carbon steel plates and two cast iron griddles. None carries a coating, so their stated heat figures run high or unstated, and their care routines ask for drying and oil instead of gentle washing. Their weights tell the handling story.

Made In Carbon Steel Griddle

The maker page describes professional-grade carbon steel from the Netherlands, built 4 mm thick and pre-seasoned twice with a blend of coconut oil and shea nut oil. The maker’s heat source list is complete: gas, electric, induction, grill and open fire, and the maker’s comparison table states a maximum heat of 1200 degrees F for the plate.

The stated weight is 9.9 lbs, and the maker states the griddle spans two burners on a standard home range, with a stated length of 24 inches. The maker also states the plate is roughly 35 to 50 percent lighter than a comparable cast iron griddle, a comparison this guide attributes to the maker and does not extend to the other steel plates here.

On induction, a flat 4 mm steel plate is the straightforward case: the whole base is magnetic, it sits flush on the glass, and both zones heat the same piece of metal. The seasoning is the surface, so eggs and pancakes release better as the plate builds its layer through the first fatty cooks.

Care is hand wash only, with no dishwasher and no steel wool in the maker’s instructions: wipe while warm, dry immediately, and apply a thin layer of oil. A lifetime warranty backs the plate. Who it is for: cooks who want cast iron behavior at lower carrying weight. Buy if you will keep the oil routine. Skip if you want to soak a griddle in the sink.

Baking Steel Griddle, 14 by 18 inch

The maker page describes a reversible slab of low carbon steel, 14 by 18 inches and 3/8 inch thick at 9.5 mm, pre-seasoned with organic flaxseed oil. One side is a baking surface for pizza and bread; the other is a smooth griddle surface. The maker lists compatibility with oven, grill, gas stovetop, electric stovetop and induction cooktop.

The stated weight is 25 pounds, by far the heaviest figure in this guide, and the design has no handles at all, which the maker states is intentional: easier storage, and full spatula access. The maker’s guidance is to move it with oven mitts or its silicone grips, a real consideration at this weight when hot.

The maker’s induction answer is direct: carbon steel is magnetic and fully compatible, and the smooth side sits across two standard burners. A 3/8 inch plate stores more heat than the thinner griddles here, so surface temperature holds steadier when cold food lands on it: the whole argument for the weight.

Care is a wipe with a damp cloth or a scrape with a bench scraper; the maker allows mild soap, requires thorough drying and a light coat of oil, and states never to put it in the dishwasher. Re-seasoning, once or twice a year, is a thin coat of oil baked at 500 degrees F for one hour. Who it is for: cooks who bake pizza and griddle on the same plate. Buy if heat storage tops your list. Skip if 25 pounds is more than you will move willingly.

Lodge Double Play Reversible Griddle, LDP3

The listing pages describe a cast iron griddle of 16.75 by 9.5 inches and 0.75 inch thickness, pre-seasoned with vegetable oil. One side is a smooth griddle; the other is a ribbed grill. The maker’s copy states the pairing plainly: induction compatible and listed for oven use on any cooktop, plus grill and campfire.

The stated weight is 9.4 lb, and the format is the smallest in this guide, a double burner plate that covers two burners without covering the whole cooktop. That smaller footprint is a genuine fit advantage on compact induction tops, where a 20 inch plate can crowd the controls or overhang the glass at the front edge.

Neither opened page states an oven temperature figure for this griddle, so this guide prints none; the article does not convert general knowledge about cast iron into a number the maker did not publish here. The listings state the griddle is made in the USA, and the routine is hand wash, dry and oil: the spec table lists dishwasher cleaning as not applicable.

Who it is for: cooks who want the reversible cast iron classic in the size most likely to fit a smaller cooktop, and who cook outdoors as well as in. The limits are the narrow 9.5 inch width, which crowds two rows of pancakes, and the ribbed side, which needs scrubbing between the ridges. Buy if fit and ease of entry matter. Skip if you need a stated oven figure or a wider surface.

Victoria Rectangular Cast Iron Reversible Griddle, 20 by 14 inch

The maker page describes the brand’s largest flat-top reversible griddle, with a stated cooking surface of 20 by 14 inches, in cast iron preseasoned with three layers of non-GMO, kosher-certified flaxseed oil. The maker’s heat source list is the broadest here: gas, electric, induction, oven, broiler, BBQ grill and campfire.

The stated weight is 18.1 lb, second only to the Baking Steel plate, and the handles are wide loops the maker describes as giving a steadier grip when moving the griddle from cooktop to table. The maker states the iron is free of PTFE, PFOA and PFAS, a composition claim attributed to the maker, and that the griddle is made in Colombia.

One honesty note belongs in the open: the same maker page prints a dimensions line of 18.5 by 10 by 0.8 inches, which does not match the 20 by 14 inch cooking surface in the product name. This guide uses the name size and the weight, and flags the conflict for buyers to confirm before ordering.

Care is the strictest stated here: hand wash with warm water only and no soap, dry thoroughly, and oil before storing; the maker states the griddle is not for dishwasher cleaning. Who it is for: cooks feeding a crowd who accept cast iron care. Buy if surface area tops your list. Skip if the weight or the no-soap routine puts you off.

Low-maintenance griddles: nitrided and enameled

Two griddles remove the seasoning routine that the four bare metal plates share. One hardens its steel surface with nitrogen so no seasoning layer is needed at all, and one seals its cast iron under enamel. Both still state their induction pairing directly, and both trade a little heat tolerance or utensil freedom for the easier care.

Misen 18 inch Carbon Nonstick Griddle

The maker page describes 3-ply construction: nitrided carbon steel on top and bottom with an aluminum core. Nitriding, in the maker’s explanation, super-heats the steel in a nitrogen-rich environment to create a durable, corrosion-resistant surface with no coating. The maker lists heat tolerance up to 1100 degrees F and induction compatibility.

The stated dimensions are a total length of 20.1 inches and a width of 13 inches, with a cooking surface of 17.6 by 12.1 inches, a body height of 1.0 inch and a thickness of 0.08 inch, or 2.1 mm. The stated weight is 5.23 lb, the lightest in this guide by a wide margin, which the maker links to the aluminum core and the thin steel skins.

The care difference is the product. The maker states no seasoning is needed before use, that the surface seasons itself gradually through cooking, and that the griddle can soak in the sink without the rust risk of plain carbon steel. The maker states the griddle is free of PFAS, PTFE and PFOA, a claim attributed to the maker here.

One maker caution tempers the picture: the factory recommends waiting about 30 days before heavy use with acidic foods while seasoning builds, and release improves with use rather than starting at a coated pan’s level. Who it is for: cooks who want a griddle they can lift with one hand and leave in the sink. Buy if low weight and low routine matter most. Skip if you want thick steel heat storage.

All-Clad Enameled Cast Iron Plancha, 11 by 19 inch

The maker page, model E2659864, describes a plancha of enameled cast iron with a glossy enamel exterior and a black matte enamel interior that requires no pre-seasoning. The stated cooking size is 11 by 19 inches, with overall dimensions of 24.8 by 12.5 by 3.0 inches including the extra wide handles, and a stated weight of 11.24 lb.

The maker lists oven use up to 650 degrees F and compatibility with all cooktops including induction and outdoor grills. Uniquely in this guide, the maker prints induction-specific guidance on the page: heat the cookware at low power and gradually increase it, always preheat with oil or cooking liquid, and do not preheat the pan empty, to avoid thermal shock to the enamel.

That guidance is worth following word for word, because enamel over iron is the one surface here that rapid induction heating can damage. The maker also recommends plastic, silicone, nylon or wooden utensils to preserve the enamel, and hand washing in warm soapy water; the page states the pan should not be cleaned in the dishwasher.

The maker states the cast iron is made with 97 percent recovered materials, designed in Pennsylvania and made in Vietnam, backed by a limited lifetime warranty. Who it is for: cooks who want cast iron heat behavior with no seasoning. Buy if you will preheat gently and use soft utensils. Skip if you want metal spatulas and hard scraping.

Buying guide

A griddle on induction is a negotiation between the plate and the zones under it. The five checks below follow that negotiation in order: how the zones heat a long plate, how to read a compatibility claim, what thickness buys, which surface routine fits your habits, and how size and handles play out in a real kitchen.

Bridge zones and the two-burner question

Every griddle here spans two burners, and induction heats only the metal sitting over an active zone. On a cooktop with a bridge function, the two zones join into one heating area; without it, each zone heats its end of the plate and the metal itself must carry heat into the middle. Thick steel and iron do that carrying better than thin metal.

Before buying, measure the distance between your two zone centers and compare it with the griddle length you are considering, which runs from 16.75 to about 20 inches here. A plate much longer than the zone spacing leaves its ends over cold glass, while a plate that matches the spacing puts both zones under the cooking surface where they belong.

Reading a griddle for induction cooktops listing

The only compatibility claim that counts is the maker’s own, stated for the exact model. Look for a heat source list or a specifications line that names induction, as every page in this guide does. Treat a works-on-all-cooktops banner with care, because one major maker’s all-cooktops griddles turn out, on its category page, to exclude induction.

Material is the second check. Induction needs a magnetic base, which is why this guide is built from carbon steel, cast iron and steel-skinned constructions. Plain aluminum and copper plates cannot be detected by the cooktop unless a magnetic base is bonded to them, and no such plate is included here.

Thickness, weight and heat storage

Thickness predicts how a griddle behaves when cold food lands on it. The stated figures run from 2.1 mm for the nitrided Misen to 3/8 inch for the Baking Steel plate; the heavy plates hold temperature through a batch of smash burgers, while the thin plate recovers by reheating quickly through its aluminum core.

Weight is the trade-off for that storage, stated plainly for all six: 5.23 lb at the light end, 25 pounds at the heavy end. Consider the whole journey, not just the cooking: a griddle carried hot to the sink and washed by hand gets used more when one person can move it easily.

Seasoned, nitrided or enameled surfaces

Seasoned steel and iron, four of the six here, ask for the same contract: dry it after washing, wipe it with a thin layer of oil, and let cooking build the surface. In return it tolerates metal spatulas and high heat and never peels. The makers here state a maximum of 1200 degrees F for the Made In plate and leave the cast iron figures general.

Nitrided steel and enamel remove the contract. The Misen needs no seasoning and can soak; the All-Clad plancha needs no seasoning and washes with soap. Their limits are different in kind: the nitrided surface builds release gradually, and the enamel asks for soft utensils and gentle preheating. Pick the routine you will actually keep, because a neglected seasoned plate and a chipped enamel plate fail the same way, by being left unused.

Handles, walls and storage

Handle design decides how a wide plate moves. The Baking Steel has none by design; the Victoria and All-Clad use wide loops shaped for mitts; the Misen raises its handles above the surface; the Lodge and Made In plates keep low profiles that slide into a cabinet.

Walls decide what you can cook. A flat plate with no raised edge, like the Baking Steel, gives a spatula full access but lets grease travel; low walls, like the plancha’s, contain a little more. None of these suits saucy cooking; keep a skillet beside the griddle for anything liquid.

FAQ

The questions below are the ones induction owners ask before trusting a long plate to two zones of glass. Each answer rests on the stated facts in this guide or on general induction practice, and none of them depends on a figure a maker did not publish for the griddle in question.

What size griddle for induction cooktops fits two burners?

Start with your own cooktop: measure the distance between the centers of the two zones you plan to use, and the depth of glass front to back. The griddles here run from 16.75 inches long for the Lodge to about 20 inches for the Misen, Victoria and Lodge formats, with widths from 9.5 to 14 inches, so most two-zone layouts have a match.

Depth matters as much as length. A 14 inch deep plate like the Victoria can overhang the front of a shallow cooktop, while the 9.5 inch deep Lodge leaves room to spare. Check that the plate sits fully on the glass with the controls reachable.

Why is the middle of my double burner griddle cooler?

On a cooktop without a bridge function, the zones heat the ends of the plate and nothing heats the strip between them directly. The plate itself must conduct heat into that middle strip, which is why thick carbon steel and cast iron, the Baking Steel at 3/8 inch above all, even out better than thin plates over two separate zones.

Working habits help as much as metal. Preheat longer at moderate power so the middle can catch up, start foods that need the hardest sear over the zones, and use the middle for holding finished pieces warm. If your cooktop offers a bridge setting, use it for griddle work.

Can I preheat an empty griddle on induction?

For seasoned steel and iron, a moderate empty preheat is normal practice; the Victoria instructions say slowly, over low to medium heat. Induction heats fast, so moderate power and patience protect both the seasoning and the plate’s flatness better than a blast at full power.

The enameled plancha is the exception, and its maker is explicit: always preheat with oil or cooking liquid, do not preheat empty, and raise the power gradually, because enamel over iron can be damaged by thermal shock. When one maker’s page prints guidance that specific, follow it for that pan even if your habits with bare steel are looser.

Does a griddle need seasoning if it is carbon steel?

Plain carbon steel does, and the two carbon steel plates here arrive pre-seasoned: the Made In twice with a coconut oil and shea nut oil blend, the Baking Steel with organic flaxseed oil. From there, cooking with fats builds the layer, and drying with light oil after washing keeps it intact.

The Misen is the stated exception. Its carbon steel is nitrided, and the maker states no seasoning is needed before use; the surface seasons itself gradually through cooking instead. Cast iron follows the seasoned pattern too: both the Lodge and the Victoria arrive pre-seasoned, with vegetable oil and flaxseed oil respectively, in their makers’ descriptions.

Will a heavy griddle damage an induction cooktop?

Glass cooktops carry weight guidance from their makers, so check your cooktop manual for its figure before choosing the 25 pound Baking Steel plate or the 18.1 lb Victoria. Within a maker’s limit, the risks are impact and dragging: set a heavy plate down gently, and lift rather than slide it, so grit under the base cannot score the glass.

Weight also changes how a griddle gets cleaned and stored, which decides whether it gets used. The Misen at 5.23 lb and the Made In at 9.9 lbs can be carried to the sink one-handed; the heavy plates are two-hand, two-mitt jobs.

Conclusion

For most induction owners, the Made In Carbon Steel Griddle is the balanced pick here: 4 mm steel, 9.9 lbs, a stated 1200 degrees F ceiling and a lifetime warranty. Cooks who hate seasoning routines should take the Misen instead, and bakers who also griddle should look hard at the Baking Steel plate.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.