Key takeaways
- Six gas grills with infrared rotisserie burners compared on rear burner ratings from 10,000 to 18,000 BTU, motor capacity, kit contents and cooking area sizes.
A rear infrared burner changes what a grill can do: instead of heating the air around a turning roast, it throws radiant heat straight at the surface, so skin crisps as the spit turns. These six gas grills with infrared rotisserie setups all pair that burner with a rotisserie system, and every rating comes from the maker’s own pages.
Quick verdict
The DCS Series 9 carries the strongest infrared rotisserie burner at 18,000 BTU and a motor rated for a 50 lb load, with the Lynx L42ATR next at up to 16,000 BTU. The Lion L75000 and Bull Brahma both run 15,000 BTU back burners, the Napoleon Prestige 665 includes its rotisserie in the box, and the Blaze LTE+ 40 rounds out the list at 10,000 BTU.
The real split in this group is not the burner rating but the kit. Four of the six arrive with rotisserie hardware included or bundled, the DCS builds the system into a 48-inch flagship, and the Bull Brahma mounts the infrared back burner but sells its rotisserie kit separately. Read the kit column of the table as closely as the BTU column before you decide. A household that roasts a chicken twice a month will feel the kit difference every single cook, while the gap between a 15,000 and an 18,000 BTU rear burner only shows up on the largest loads of the year.
| Model | Infrared rear burner | Rotisserie kit | Cooking area |
|---|---|---|---|
| DCS Series 9 BE1-48RC-N, 48-inch | 18,000 BTU | System built in; motor rated for 50 lb | 1,593 sq. in. total |
| Lynx Professional L42ATR, 42-inch | Up to 16,000 BTU | Dual-position rotisserie, three-speed motor | 1,200 sq. in. total |
| Lion L75000, 32-inch | 15,000 BTU | Included in gourmet package | 830 sq. in. total |
| Bull Brahma, 38-inch | 15,000 BTU | Sold separately | 943 sq. in. |
| Napoleon Prestige 665 Connected RSIB | Infrared rear burner (rating not split out by maker) | Included | Main area 37 x 18 in. |
| Blaze Premium LTE+ 40 | 10,000 BTU | Included in package | 897 sq. in. total |
How we selected these rotisserie grills
The entry rule: the maker has to state an infrared rear or rotisserie burner for the model in its own material. Grills with a standard rear burner were left out, and so were grills whose infrared element is a sear zone rather than a rear burner aimed at a spit. Every model also has a rotisserie system, built in, bundled or matched to the burner.
Ratings are quoted the way each maker publishes them. Most give the rear burner its own BTU figure; Napoleon lists infrared side and rear burners on the Prestige 665 without splitting out a rear-only rating, so the article says exactly that instead of borrowing a number from another model or another year. Kit status is stated per model, because a burner without a spit is only half a rotisserie.
The list also stays inside one format family on purpose: all six are built-in or cart-flagship grills with hoods deep enough for a turning roast. Small portables with bolt-on spits were left out, since their rear burners, where they exist at all, are standard burners rather than the infrared units this keyword is about.
The six gas grills with infrared rotisserie burners
The order follows the rear burner rating, highest first, with the Napoleon placed by its maker’s presentation rather than a guessed figure. Each review covers the rear burner, the motor and kit, the main cooking specs that share the hood, and the warranty terms that apply to the parts doing the work.
Two of the six, the Lion and the Bull, post the same 15,000 BTU rear-burner figure, so their order here follows kit status and format rather than output. Where two grills tie on the number, the one that puts the spit in the box gets the earlier slot.
DCS Series 9 BE1-48RC-N, 48-inch
DCS rates this grill’s infrared rotisserie burner at 18,000 BTU, the highest rear-burner figure, and the motor is rated to turn a 50 lb load, which covers the largest birds and roasts most households ever mount. The rotisserie sits inside a 48-inch grill with a total power of 118,000 BTU, so the main burners are no afterthought beside the spit.
Cooking area totals 1,593 square inches, 855 primary and 738 secondary, and the stated heat range runs from 300 to 1,100 degrees Fahrenheit. Construction is 304 grade stainless steel with hot surface ignition and a hood temperature gauge, and a charcoal smoker tray lets smoke join a rotisserie cook. For a household that roasts whole birds often and large roasts on occasion, this is the heavy-duty end of the list. The secondary surface deserves a mention too: at 738 square inches it is larger than the entire cooking area of many grills, which makes side dishes during a long rotisserie cook a non-issue.
- Infrared rotisserie burner: 18,000 BTU; motor rated for a 50 lb load
- Total power: 118,000 BTU; 4 U-burners at 25,000 BTU each
- Cooking area: 855 sq. in. primary, 738 sq. in. secondary, 1,593 sq. in. total
- Heat range: 300 to 1,100 degrees Fahrenheit; 304 grade stainless steel
Lynx Professional L42ATR, 42-inch
Lynx pairs a rear infrared burner delivering up to 16,000 BTU with a dual-position rotisserie driven by a heavy-duty three-speed motor. The dual position lets the spit sit at different distances from the burner, and three speeds give the cook control over how fast the food’s surface cycles past the heat, two adjustments most systems never offer.
The grill itself runs an all-infrared Trident burner platform rated at 69,000 BTU across 3 burners, with a temperature range from below 300 to over 1,000 degrees. Cooking surface totals 1,200 square inches, 855 primary and 345 secondary, on stainless steel grates. Hot surface ignition, a premium smoker box and a temperature gauge round out the spec sheet, and the unit measures 42 inches wide by 25 inches high by 27.88 inches deep. The all-infrared main platform is a point of difference in this group: every burner on the L42ATR, main and rear alike, works on radiant heat rather than hot air.
- Rear infrared burner: up to 16,000 BTU
- Rotisserie: dual-position, heavy-duty three-speed motor
- Total output: 69,000 BTU, 3 Trident infrared burners
- Cooking surface: 1,200 sq. in. total; 855 primary, 345 secondary
Lion L75000, 32-inch
The Lion L75000 mounts a 15,000 BTU rotisserie infrared back burner in a 32-inch body, the most compact grill in this group, and the rotisserie itself comes in the box as part of the gourmet package, alongside a cover, a smoker box and a griddle. Four main burners total 60,000 BTU, which brings the combined output to 75,000 BTU.
Total cooking area is 830 square inches, split between 647 square inches of main surface and a 183 square inch warming rack. Construction is 16-gauge 304 stainless steel with cast stainless steel burners and a flame-thrower style ignition. Lion covers the cast burners, housing, framing and cooking grids with a lifetime warranty. For a smaller island that still wants a true infrared rotisserie, this is the natural fit. The 32-inch width also makes it the easiest of the six to place in an existing island cutout plan, where the wider flagships often force a redesign of the whole counter run.
- Infrared back burner: 15,000 BTU; rotisserie included in gourmet package
- Output: 60,000 BTU main burners; 75,000 BTU combined
- Cooking area: 830 sq. in. total; 647 main, 183 warming rack
- Construction: 16-gauge 304 stainless steel; lifetime warranty on burners and housing
Bull Brahma, 38-inch
Bull builds a 15,000 BTU infrared back burner into the Brahma and rates the grill at 90,000 BTU in total, from five cast stainless steel burners at 15,000 BTU each plus the back burner. The caveat: the rotisserie kit for this head is sold separately, so the burner is ready on day one and the spit joins it when the kit is added to the order.
The cooking surface is rated at 943 square inches on solid stainless steel grates, with a 223 square inch warming rack, under a single-piece dual-lined hood. Piezo ignition, a twin lighting system and a heavy-duty thermometer are standard, the head weighs 184 lb, and Bull covers the cast burners, insert assembly and cooking grates for life. Buyers who count the kit into the plan from the start get one of the strongest burner setups here. The twin lighting deserves a note for rotisserie cooks in particular, since spit roasting often runs into the evening and a lit cooking surface makes basting checks and temperature reads easier after dark.
- Infrared back burner: 15,000 BTU; rotisserie kit sold separately
- Total output: 90,000 BTU; 5 burners at 15,000 BTU each
- Cooking area: 943 sq. in., plus a 223 sq. in. warming rack
- Warranty: lifetime on cast burners, insert assembly and cooking grates
Napoleon Prestige 665 Connected RSIB
Napoleon’s page for the Prestige 665 Connected lists infrared side and rear burners and includes the rotisserie with the grill, so burner and hardware arrive together. Napoleon does not split a rear-only rating out of the 94,000 BTU heat output on that page, so the figure stays unstated here rather than borrowed from an older manual.
Five main burners work a main cooking area of 37 by 18 inches, rated by the maker at 41 burgers. The Connected package adds Wi-Fi and Bluetooth support, an LCD display and included temperature probes, which pair well with rotisserie cooking, where the cook’s attention is on the turning roast for an hour or more. A lifetime limited warranty backs the grill. For buyers who want the rotisserie included and connected monitoring beside it, this is the pick. The infrared side burner earns its place in a rotisserie kitchen too, holding sauces and sides at the grill instead of sending the cook back indoors mid-roast.
- Rear burner: infrared rear rotisserie burner; rotisserie included
- Heat output: 94,000 BTU total; 5 main burners
- Cooking area: main area 37 x 18 in., rated for 41 burgers
- Extras: Wi-Fi and Bluetooth, LCD display, temperature probes; lifetime limited warranty
Blaze Premium LTE+ 40
Blaze rates the LTE+ 40’s rear infrared rotisserie burner at 10,000 BTU, the lowest figure in this group, and includes the rotisserie kit in the package along with an infrared searing burner. Five cast stainless steel burners at 14,000 BTU each give 70,000 BTU on the grilling surface, for 80,000 BTU combined with the rear burner counted in.
Cooking area totals 897 square inches, 670 main and 227 secondary, in a 304 stainless steel body with flame-thrower style ignition and triangle-shaped searing rods. Blaze covers the stainless steel components and burners with a lifetime warranty, with electrical and ignition parts at 1 year. The 10,000 BTU rear burner suits chickens and smaller roasts best, turning steadily rather than blasting, which many cooks prefer for even browning. It is also the gentlest burner here for delicate loads like a stuffed bird, where a slower surface cook keeps the skin intact instead of splitting it.
- Rear infrared burner: 10,000 BTU; rotisserie kit included
- Output: 70,000 BTU grilling surface; 80,000 BTU combined
- Cooking area: 897 sq. in. total; 670 main, 227 secondary
- Warranty: lifetime on stainless components and burners
Buying guide for gas grills with infrared rotisserie burners
A rotisserie burner is a specialist tool: it does one job, roasting on a spit, and the specs that matter are the ones tied to that job. Burner rating, motor strength, kit contents and hood room decide how the system cooks, while the main burners only set the stage. The sections below take those four in order, then close on clearance.
One theme runs through all four: the published rear-burner rating is the least personal number on the spec sheet. Two cooks with the same grill and the same chicken get different results from distance, balance and trussing, which is why the guide spends as much time on setup as on the figures the makers advertise.
How an infrared rear burner cooks
A standard rear burner heats the air inside the hood, the way an oven does. An infrared rear burner instead radiates heat directly onto the surface of the turning roast, so the outside browns and crisps while the inside cooks through gently. That direct heat is why infrared rotisserie results taste different from oven-style roasting.
The spit does the rest of the work: constant rotation keeps juices moving over the surface and gives every side equal time in front of the burner. Pair the two and a chicken bastes itself as it turns. The practical lesson is that burner placement and distance matter as much as the rating, which is why the Lynx dual-position spit is a meaningful feature rather than a flourish. Distance is the cook’s throttle: moving the roast an inch or two away from the burner calms the surface heat without touching a dial.
Motor capacity is the quiet limit
The motor decides what you can roast, because an overloaded spit turns unevenly, stalls at the heavy side and overcooks one face. DCS publishes the clearest figure, a motor rated for a 50 lb load, and Lynx answers with a three-speed motor. Where a maker gives no load figure, plan conservatively and balance the load on the spit.
Balance matters as much as raw weight. A centered, tightly forked chicken turns smoothly on a modest motor, while an off-center roast of the same weight fights the motor on every rotation. Counterweights, where the kit includes them, exist for exactly this reason. Trussing poultry and centering roasts on the spit are the two habits that make any of these systems feel stronger than its rating. A simple test before lighting: turn the motor on with the loaded spit in place and watch one full rotation. A load that dips or hesitates at the same point every turn needs rebalancing, not more heat.
Kit included, bundled or separate
The same burner can arrive three ways. Napoleon and Lion include the rotisserie, Blaze bundles the kit, Lynx and DCS build the system in, and Bull sells the Brahma’s kit separately. The separate kit changes the order total and the day-one experience, so settle the question before the grill is installed.
Check what the kit contains, not just that it exists: spit rod, forks, motor and any counterweight or bracket the model needs. A kit matched to the grill by its maker fits the burner spacing and hood depth exactly. Universal kits can work, but the rod length and fork spread have to match the cooking area, and a mismatch shows up the first time a large bird goes on. The motor mount matters too: a bracket that flexes under load adds a wobble to every rotation, and the wobble cooks unevenly.
Hood room and roast size
A rotisserie roast hangs below the spit rod and swings through a circle, so the hood and firebox need room for the largest item you plan to cook, with clearance from the rear burner behind and the grates below. The 48-inch DCS and the 42-inch Lynx give big birds the most swing room in this group, while the 32-inch Lion asks for more modest loads.
Many cooks remove the cooking grates during a rotisserie session and set a drip pan on the burners or flavor bars below the roast, which catches drippings and keeps them out of the firebox. That habit also frees vertical room. Plan the pan into the setup: it has to sit below the swing of the food, and it doubles as the base for gravy once the roast comes off. A shallow pan of water or stock in that spot also steadies the humidity around the roast on very long cooks, a small trick borrowed from oven roasting that suits the rear-burner method well.
FAQ
Rotisserie shopping raises practical questions that spec sheets only half answer: what the motor can turn, whether the main burners join in, and what to do about drippings. The answers below stick to the six models above where figures are involved and to standard rotisserie practice where they are not.
What size roast can these rotisseries turn?
The only maker-published load figure belongs to the DCS, whose motor is rated for a 50 lb load, enough for the largest turkeys and roasts a home cook mounts. The other makers describe heavy-duty motors without a load number, so keep loads centered and balanced, and treat very large birds as a two-fork, well-trussed job.
Do the main burners run during rotisserie cooking?
Yes, and for large loads they often do, at low settings, holding hood temperature while the rear burner does the surface work. For a chicken, the rear infrared burner alone is the classic way, with the main burners off and a drip pan below. These grills all have main burners strong enough, from the Lion’s 60,000 BTU to the DCS total of 118,000 BTU.
Can a rotisserie kit be added to any grill?
A kit adds the spit, forks and motor, but not the rear infrared burner, which is built into the grill’s back wall with its own gas line and ignition. That is why this list starts from models with the burner stated by the maker. The Brahma shows the middle case: burner built in, matched kit separate, so the upgrade path is a box, not a rebuild.
How are drippings handled under the spit?
The standard method is a drip pan below the roast, on the grates or on the flavor bars with the grates removed, so drippings land in the pan instead of on the burners. The pan catches the juices for gravy and keeps the firebox cleaner, which matters more on a long rotisserie cook, where fat renders steadily for an hour or more.
Is a higher rear burner rating always better?
Not on its own. The 18,000 BTU DCS and 10,000 BTU Blaze burners bracket the group, and the right figure depends on load and distance: a big roast set far away wants more output, while a close chicken can scorch before it cooks through. Spit position, like the Lynx dual-position setup, counts as much as the rating.
Conclusion
For the strongest setup, the DCS pairs an 18,000 BTU rear burner with a 50 lb motor, the Lynx adds position and speed control at 16,000 BTU, and Lion and Bull sit at 15,000 BTU with opposite kits. The Napoleon includes its rotisserie, the Blaze closes at 10,000 BTU with the kit bundled. Match the burner to your biggest roast, and the rest follows.