Key takeaways
- Five gas grills built for steak cooking compared on searing hardware, burner output, grate material and cooking area, from a 32 inch cart to a 94,000 BTU model.
Steak cooking is a heat problem: a grill has to get fiercely hot for the crust, then offer a gentler zone for the finish. The gas grills for steaks below were chosen for searing hardware, burner output and grate mass, from a 32 inch cart grill to a six-burner flagship. All five put serious metal between the burner and the meat.
Quick verdict
The Blaze Premium LTE+ 32 is the most steak-focused design here: four cast stainless burners, patented triangular searing rods and removable heat zone separators. The DCS Series 7 36 answers with raw output, 92,500 BTU of total power and a maker-stated heat range up to 1,100 degrees.
The Bull Angus Premium Cart is the balanced freestanding pick, with 75,000 BTU, solid stainless grates and a dual-lined hood. The Napoleon Prestige 665 is the largest grill in the group, adding an infrared Sizzle Zone side burner for the hardest sear of all.
The Monument Eminence 605 closes the list as the connected option: six ThermaSear burners, a side searing station, Bluetooth monitoring and a maker-stated preheat to 800 degrees F in 10 minutes. Every grill here pairs strong main burners with a second way to finish a steak.
The group splits by searing method. Two grills sear over heavy grates and standard burners, two add an infrared station outside the main box, and one builds the sear into a full-power main grate with a stated four-figure temperature ceiling. The buying guide below explains how to choose between those layouts.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Blaze Premium LTE+ 32 | Built-in or cart | Sear marks and zone control | 66,000 BTU total, 715 sq in | Cart is a separate configuration |
| DCS Series 7 36 | Built-in or cart | Maximum heat range | 92,500 BTU total power, 871 sq in | Premium build, large footprint |
| Bull Angus Premium Cart | Freestanding cart | Balanced family steak nights | 75,000 BTU, 575 sq in primary | Rotisserie kit not included |
| Napoleon Prestige 665 | Freestanding cart | Big groups, infrared searing | 94,000 BTU, 1,065 sq in total | Largest and heaviest class here |
| Monument Eminence 605 | Freestanding cart | App monitoring, included extras | 89,000 BTU total output | Total area figure not stated by maker |
How we selected
Steak duty set the filter: each grill needed strong main burner output, grates with real mass or a searing design, and a second heat path such as an infrared burner or a sear zone for finishing. Figures come from maker pages and listing pages opened for this list.
General-purpose cart grills with thin stamped grates were left out, however good their other features looked. A steak grill earns its place with heat at the grate surface, and that comes from burner output per square inch, grate material and thickness, and how well the hood holds heat.
Size still mattered. The five picks span 32 to 36 inch class grill heads plus one extra-wide six-burner cart, so the list covers a built-in island slot, a standard patio corner and a full outdoor kitchen run without repeating the same grill twice.
Every figure in the product sections comes from a maker page or a listing page that names the model and its configuration. Where a maker counts rotisserie or smoker burners inside a total power figure, the entry says so, because steak cooking runs on the main burners and the grate above them.
The best gas grills for steaks, model by model
Five grills follow. Each entry covers the searing hardware that matters for steaks, the output and area figures the maker or listing page publishes, and the limits to weigh before the grill takes its place on the patio or in an island. Each takes a different route to the same crust.
Blaze Premium LTE+ 32 Inch Gas Grill
The LTE+ 32 is built around its grates. The listing page describes patented 9mm triangular searing rods, a rod shape the maker designs to leave wide sear marks and channel drippings, over four cast 304 stainless steel burners rated at 14,000 BTU each.
Main burner output totals 56,000 BTU, and a 10,000 BTU infrared rear burner brings the total to 66,000 BTU. Cooking space is 715 square inches in total, with 531 square inches of main area. Removable heat zone separators let one side run hot for searing while the other side holds a lower finishing temperature.
The grill comes in built-in form or on a cart, in natural gas or propane, with a built-in analog thermometer. The listing states a lifetime warranty on the stainless steel components. For steak cooking, the combination of heavy rods, zone separators and cast burners is the most purpose-built setup in this group.
The infrared rear burner earns its place on thicker roasts and whole chickens rather than steaks, but it rounds out the grill for the rest of the week. With the separators removed, the full 531 square inches of main area runs as one even field for batch cooking burgers or vegetables.
- Pros: searing rods, zone separators, cast stainless burners
- Cons: no infrared sear burner in the main box, cart configuration takes extra planning
Buy it if sear marks and two-zone control are the priority and the grill will live in an island or on its cart full time. Skip it if a side sear station matters more than the main grate, where the Prestige 665 below takes a different approach.
DCS Series 7 36 Inch Grill
The DCS Series 7 36 brings the highest ceiling in this group. The maker page describes heat from a low 300 degrees up to an intense 1,100 degrees, with double-sided cast stainless steel grates and what the maker calls full surface searing across the grate.
Three U-burners are rated at 25,000 BTU each. The maker lists total power at 92,500 BTU, a figure that includes a 14,000 BTU rotisserie burner and a 3,500 BTU smoker burner. Primary cooking area is 630 square inches, total area is 871 square inches, and the warming rack adds 241 square inches.
The grill is built from 304 grade stainless steel and measures 35 7/8 inches wide, 24 1/4 inches high and 26 5/8 inches deep. The rotisserie is rated by the maker for loads up to 50 lb. This is a built-in class grill that also suits a cart, aimed at cooks who sear thick cuts hard and finish them slow.
The double-sided grates deserve a note: one side carries a wider channel pattern and the other a flatter face, so the same grate offers two contact styles. The maker built that choice into the Series 7 line for cooks who switch between delicate fish and thick beef cuts.
- Pros: highest stated heat range, heavy cast grates, big primary area
- Cons: total power figure includes rotisserie and smoker burners, premium footprint
Buy it if thick steaks, high heat and a built-in installation are the plan. Skip it if the patio needs a mid-size freestanding grill that can move, where the Bull Angus cart below is the easier fit.
Bull Angus Premium Complete Cart
The Angus Premium Cart is the straightforward freestanding steak grill in this list, and it asks for the least extra equipment of any pick here. The maker page lists four cast stainless steel burners at 15,000 BTU each, plus a 15,000 BTU infrared back burner, for 75,000 BTU of total output across the grill.
Primary cooking area is 575 square inches with a 176 square inch warming rack. The cooking grates are solid stainless steel, the body is 304 stainless steel, and a single-piece dual-lined hood holds heat over the grate. Solid rod grates store heat well, which is what a steak needs in the first minute of contact.
One change to note on current models: the maker states the rotisserie spit and motor are not included on the next-generation Angus cart, and the kit is an optional extra. Steak cooks lose nothing by that, but anyone planning rotisserie work should order the kit with the grill rather than after it.
The infrared back burner still covers slow roasting duty from behind the food, which suits prime rib and whole chickens. Between that burner, the warming rack and the main grate, the Angus runs a three-level cook without any electronic extras to set up or maintain.
- Pros: strong even output, solid stainless grates, dual-lined hood
- Cons: rotisserie kit sold separately, no side sear station
Buy it if the brief is a durable cart grill that sears well and asks for little else. Skip it if an infrared side burner or app features are on the list, where the Prestige 665 and Eminence 605 go further.
Napoleon Prestige 665
The Prestige 665 is the big-grill answer to steak night for a crowd. The maker catalog page lists 94,000 BTU in total, the highest figure here, from five stainless steel main burners plus an infrared Sizzle Zone side burner and an infrared rear rotisserie burner.
Total cooking area is 1,065 square inches, with a main cooking area of 37 by 18 inches. The cooking grids are 8.5 mm stainless steel in the maker Iconic WAVE pattern, thick rods that hold heat for searing. A heavy duty rotisserie kit is included, and ignition is the maker JETFIRE 2.0 system.
The Sizzle Zone side burner is the steak feature: an infrared burner outside the main box that takes over the hardest searing while the main grate handles the rest of the meal. The maker lists a lifetime limited warranty. The trade-off is sheer size, since this grill needs a wide, permanent patio spot.
Five main burners also mean five zones to play with: a common steak-night layout runs the Sizzle Zone for crusts, two main burners for finishing, and the remaining grate for vegetables and bread. Few grills in this class offer that many simultaneous heat levels.
- Pros: infrared side burner for searing, huge area, rotisserie kit included
- Cons: largest footprint in the group, five burners to clean and maintain
Buy it if steak nights regularly feed a table of people and the patio has a fixed wide corner. Skip it if the grill must tuck into a small space or move for storage, where the 32 inch Blaze is the tighter fit.
Monument Grills Eminence 605
The Eminence 605 pairs six main burners with connected features. The maker page lists six ThermaSear burners delivering 66,000 BTU, a total grill output of 89,000 BTU, an infrared rear burner and a side searing station for finishing steaks outside the main box.
The maker states the grill preheats to 800 degrees F in 10 minutes, and lists a primary cooking area of 640 square inches in its product answers. A rotisserie kit and two meat probes are included, and Bluetooth connectivity with an LED display handles temperature monitoring during longer cooks.
The grill is dual gas: it runs on propane as delivered, and the maker lists a natural gas conversion kit, part 97352, sold separately. For steak cooking, the side searing station plus six-zone main box gives the most layout flexibility here, paired with the widest cleaning routine in the group.
The two included meat probes matter more than they first appear to: thick steaks finish by internal temperature, and a probe in the finishing zone removes the guesswork that leads to overcooked centers. The LED display shows those readings at the grill without a phone in hand.
- Pros: side searing station, probes and rotisserie kit included, app monitoring
- Cons: conversion kit extra, maker does not state a total cooking area
Buy it if connected monitoring and included accessories matter alongside searing hardware. Skip it if a simple, no-electronics grill is the goal, where the Bull Angus keeps the design plain.
Buying guide
Steak grills are bought on heat delivery, not headline output alone. The checks below use the figures makers publish: burner output, grate material and thickness, searing hardware, and the zones available for finishing a thick cut after the crust forms.
Burner output and heat at the grate
Total BTU figures flatter big grills, so divide output by main cooking area for a fair comparison. The DCS puts 75,000 BTU of main burner output under 630 square inches, while the Blaze puts 56,000 BTU under 531 square inches; both are strong densities for searing.
Maker-stated temperature ceilings help too, where they exist. DCS describes a range up to 1,100 degrees, and Monument states an 800 degree F preheat for the Eminence 605. Where a maker does not state a ceiling, judge by burner density and grate mass instead of guessing.
Grate material on gas grills for steaks
Grate mass is what prints the crust. Thick stainless rod grates, cast stainless grates and the 9mm triangular rods on the Blaze all store heat and return it to the meat on contact. Thin stamped steel grates lose heat at each flip and leave pale marks.
Cast iron grates also sear well and appear across the wider market, though they need seasoning and rust care. Porcelain coatings reduce sticking and cleaning effort. Match the grate to the maintenance routine that will actually happen after the cook, not the ideal one.
Sear burners and infrared zones
An infrared sear burner, in the box or on the side, gives a steak a hotter, drier surface than a standard tube burner zone. The Prestige 665 puts its Sizzle Zone on the side, the Eminence 605 adds a side searing station, and the Blaze answers with searing rods over standard burners.
Each layout has a logic. In-box searing keeps everything under one lid. A side station frees the main grate for the rest of the meal and keeps flare-ups away from other food. Decide by how the whole meal cooks, not by the steak alone.
Zones for the finish
A thick steak needs two heats: full power for the crust, then a gentler zone to reach the target center without burning the surface. Two burners are the minimum for that split; the five and six burner grills here offer a wide finishing area with room for sides.
Heat zone separators, like the removable set on the Blaze, sharpen the split between zones. Warming racks also help, holding finished steaks off direct heat while the rest of the batch catches up. Size the zone layout to the thickest cuts cooked most often.
Size, fuel and installation
Built-in heads such as the Blaze and DCS need an island cutout built to the maker dimensions, while the carts in this list only need floor space and clearance. Measure the spot with the lid open, and check the maker page for the exact width and depth of the chosen configuration.
Fuel choice is a one-time decision with long effects. Most picks here offer propane and natural gas versions or a conversion path; the Eminence 605 needs a separate conversion kit. A plumbed gas line ends cylinder swaps, while propane keeps the grill free to move.
FAQ
Steak grilling questions usually come down to heat, grates and timing. The answers below use the figures the makers publish for the five grills above, plus general technique that applies to any gas grill used for thick cuts. Most come back to how heat meets the meat.
How hot do gas grills for steaks need to get?
Hot enough to form a crust in the first minutes of contact. Makers state ceilings differently: DCS describes up to 1,100 degrees for the Series 7, and Monument states an 800 degree F preheat for the Eminence 605. Strong burner density and heavy grates matter as much as the ceiling figure.
In practice, a long preheat with the lid down matters more than any single number. Grates need time to store heat, and a grill opened too early cooks the first side well and the second side weakly. Give any of these grills a full preheat before the steaks go on.
Is an infrared burner better for steaks than standard burners?
Infrared burners run hotter and drier at the surface, which suits a fast, hard sear. The Prestige 665 Sizzle Zone and the Eminence 605 side station use that approach. Standard burners under heavy searing rods, like the Blaze setup, reach a similar result with a different mechanism.
The honest answer is that both routes work, and grate mass plus preheat decide more than the burner label. Choose the layout that fits the meal: side stations keep the main grate free, in-box searing keeps the whole cook under one lid.
Which grate material leaves the best sear marks?
Thick metal with real mass. The 8.5 mm stainless WAVE grids on the Prestige 665, the solid stainless grates on the Bull Angus and the 9mm triangular rods on the Blaze all hold heat through contact and print defined marks on the meat. Width and spacing vary by design, and both shape the finished look.
Mark shape follows grate shape: rods leave lines, triangular rods leave wider bands. Marks are cosmetic as much as functional, but they signal a grate that stayed hot, which is the same property that builds an even crust across the whole surface.
How many burners does a steak grill need?
Two is the working minimum, because steak cooking needs a hot zone and a finishing zone. Four burners, as on the Blaze and the Bull Angus, give a wider hot zone and a cooler edge. Five and six burner grills add room for cooking sides at different heats at the same time.
More burners also mean more parts to clean and more knobs to manage. For a household that cooks two to four steaks at a time, a four burner grill is the balanced point. Bigger counts earn their keep when steak night is a group event.
Can these grills cook more than steak?
Yes. Every grill here is a full outdoor cooker: the DCS adds a smoker burner and a rotisserie rated to 50 lb, the Prestige 665 includes a rotisserie kit, and the Eminence 605 includes probes for long cooks. Steak hardware does not limit the rest of the menu.
The reverse is not always true, which is why this list filtered for searing first. A grill chosen for low and slow cooking alone may never get hot enough at the grate for a proper crust. Buy for the hardest job the grill will face each month.
Conclusion
For most steak cooks, the Blaze Premium LTE+ 32 is the pick: searing rods, zone separators and cast burners in a 32 inch frame. For maximum heat, the DCS Series 7 36 stands alone. Crowds point to the Prestige 665 and its infrared side burner. Pick the heat path that matches the cuts cooked most often, and the rest follows.