Updated Nov 16, 2026· 14 min read

Key takeaways

  • Five marine gas grills for boats compared on cooking area, burner output, stainless construction, mounting systems, fuel connections, weight, and dimensions.

A grill that lives on a boat needs stainless construction, a latching lid, and a mount or legs that suit the deck, so the best gas grills for boats are purpose-built marine models rather than backyard portables. This roundup compares five on cooking area, output, materials, mounting, and fuel connections.

Quick verdict

The five grills below run from the compact Magma TrailMate at 108 square inches to the Magma Monterey II Classic at 420 square inches, and all five are stainless marine models fueled by 1 lb propane canisters. The Monterey II Classic also posts the highest output here at 18,000 BTU, while the Marine Kettle 3 Original is the lightest at 9.86 lb.

Pick the Monterey II Classic for a primary and secondary grate that feeds a full crew from the rail. Pick the Dickinson Spitfire 180 for a mid-size octagonal body with deck legs and a cover in the box. Pick the Dickinson Sea-B-Que Small for one or two people, with legs included and a 148 square inch grate. Pick the Marine Kettle 3 Original for the lightest grill here that also works as a stove. Pick the TrailMate for the smallest stowage footprint and a lockable lid.

Product Cooking area Output Construction Best for Main limit
Magma Monterey II Classic 420 sq in total 18,000 BTU 18-8 mirror-polished stainless steel Larger crews at the rail Mounts sold separately
Dickinson Spitfire 180 176 sq in 10,000 BTU 304 marine-grade stainless steel Mid-size crews, cover included Two grate sections, not one grate
Dickinson Sea-B-Que Small 148 sq in 10,000 BTU 304 marine-grade stainless steel One or two people 20 lb tank needs an optional hose kit
Magma Marine Kettle 3, Original Size 133 sq in 10,700 BTU 18-8 mirror-polished stainless steel Lightest here at 9.86 lb Round grate shape
Magma TrailMate Gas Grill 108 sq in 7,500 BTU 18-8 mirror-polished stainless steel Smallest stowage footprint Smallest grate in this group

How we selected

Each model below earned its place from a maker catalog, maker reference chart, or dealer listing that publishes its construction, cooking area, burner output, and fuel connection. Only purpose-built marine grills were considered, and the set was chosen to span the size range a boat can carry, from a 9.86 lb kettle to a 420 square inch rail grill.

Selection weighted the facts that decide life aboard: stainless construction that stands up to spray, a lid that latches for transport, a burner design that answers wind, and a mounting route or included legs. The entries below state those facts first, then the area and output figures, then the limits, such as mounts sold separately or a grate sized for two. The two makers in this group take different routes to the same brief: Dickinson builds rigid octagonal bodies in 304 grade steel with legs in the box, while Magma builds polished 18-8 bodies around lockable lids and a mount system sold by rail size.

Five gas grills for boats built for life on the water

The five models below come from the two established marine grill makers and cover most boat sizes, from a daysailer cooking for two to a cruiser feeding a raft-up. Each entry gives the construction and mounting facts its maker publishes, the specifications behind them, and the trade-offs to weigh before buying.

Magma Monterey II Classic

The Monterey II Classic is the large grill in the Magma line, with 420 square inches of cooking area split between a 12 x 24 inch primary grate and a 5 1/2 x 24 inch secondary area. Its burner is rated at 18,000 BTU, the highest output here, and the body is 18-8 mirror-polished marine grade stainless steel, and the maker lists USA construction.

A redesigned combustion system anchors the design, which the maker describes as holding its flame in windy conditions, with advanced electronic pulse ignition and a stainless steel hermetically sealed thermometer. The lid is balanced and lockable, and a full double-lined lower shell funnels grease into a front-access, lock-in-place grease tray. Sectional grill grates lift out in pieces, a stainless dual element radiant plate spreads heat, and the turbo burner design mixes air and fuel before the burner. Integrated fold-away legs cover tabletop use, the swiveling valve runs on 1 lb canisters and adapts to onboard LPG or CNG with optional valves, and mounts and serving shelves are sold separately. The secondary area earns its place at anchor: it holds finished food warm while the primary grate finishes the next round, and it gives delicate items a gentler shelf away from the direct heat of the main burner. On a boat hosting another crew, that two-level layout is the difference between serving in rounds and serving together. The front-access grease tray locks in place, and the sectional grates lift out in pieces sized for a galley sink, so cleanup after a raft-up dinner stays a one-bucket job.

Pros: by far the most cooking area here, a secondary grate for holding food, and the strongest wind story in the group. Cons: mounts are a separate purchase, and a 24-inch-wide grill asks the most of rail space and storage. Buy if: the boat hosts and the grill lives mounted all season. Skip if: the grill must stow in a small locker after every outing.

Dickinson Spitfire 180

The Spitfire 180 builds its body in 304 marine-grade stainless steel, with a mirror-finish lid over a brushed body, in a high-strength octagonal shape the maker describes as resisting flex and wind. The burner is rated at 10,000 BTU and designed to keep its flame in windy conditions, under a cooking surface of 11 x 16 inches, 176 square inches.

Deck legs come in the box for tabletop or mounted use, and the maker includes a black vinyl all-weather cover. Two removable stainless grill sections, a drip tray, a spark igniter, a built-in thermometer, and a stainless latch that secures the hood for transport or storage make up the working set, and the rollaway hood opens within the grill’s own footprint. Fuel is 1 lb disposable propane bottles, or a 20 lb tank through optional hose kits. The listing states CSA and ABYC approval for marine use, a 1-year product warranty, and a 3-year burner warranty. The grill measures 24 inches wide, 13 inches high, and 14.75 inches deep, and weighs 25 lb. The two stainless sections lift out separately, which makes the grate easier to wash in a small galley sink than a single full-width grate, and the drip tray under them catches what would otherwise reach the deck or the burner.

Pros: legs and a cover included, a long burner warranty, and a mid-size grate that suits most crews. Cons: the grate comes in two sections rather than one piece, and the tank connection needs an optional hose kit. Buy if: you want one grill that covers most boat cooking without rail hardware. Skip if: a single full-width grate matters for large items.

Magma Marine Kettle 3, Original Size

The Marine Kettle 3 in Original Size is a round kettle grill of 14 15/16 inches in diameter with a grilling surface of 133 square inches and a burner rated at 10,700 BTU. The exterior is mirror-polished 18-8 stainless steel, and a radiant plate and dome system shapes the heat under the hinged lid.

The maker describes the kettle as usable as a stove as well as a grill, so a pot sits on it for soups or morning coffee. Electronic pulse ignition lights the burner, and the hinged lid stays attached to the body, which matters over water. The product weight is listed at 9.86 lb, the lightest figure in this group, and the maker lists a 1-year warranty. The swiveling control valve runs on 1 lb canisters, with optional valves for onboard low-pressure systems, and rail and pedestal mounts are sold separately. The round format suits the way many small boats cook: one pan or a ring of items around the center, with the dome lid covering tall loads that a flat lid would crowd.

Pros: the lightest grill here, stove duty from the same unit, and a lid that cannot be dropped overboard. Cons: a round grate fits round loads best, and the mount is a separate purchase. Buy if: weight and space rule the decision on a smaller boat. Skip if: you grill long racks or planks that need a rectangular surface.

Dickinson Sea-B-Que Small

The Sea-B-Que Small is the compact Dickinson, built from 20-gauge 304 marine-grade stainless steel in the maker’s octagonal shape, which resists flex and improves wind protection per the listing. The burner is rated at 10,000 BTU, under a cooking surface of 9.25 x 16 inches, 148 square inches, sized by the maker for one to two people.

Deck legs are included for tabletop or mounted use. Four removable porcelain grill sections, a drip tray, a built-in thermometer, and a rollaway hood make up the cooking set, and a stainless steel latch secures the hood during transport. The four sections lift out one at a time, which suits a small galley sink and lets the cook clear one side of the grate while the other side keeps cooking. Fuel is a standard 1 lb propane bottle, or a 20 lb tank using optional hoses. The listing states CSA and ABYC approval for marine and RV use, a 1-year product warranty, and a 3-year burner warranty. The grill measures 24 inches wide, 12.375 inches high, and 10 inches deep, and weighs 18 lb.

Pros: legs included, the Dickinson wind-resistant body in an 18 lb package, and a long burner warranty. Cons: a grate sized for two, and the 20 lb tank route needs optional hoses. Buy if: a couple cooks aboard and wants a grill that also works on the dock table. Skip if: three or more plates come off the grate at once.

Magma TrailMate Gas Grill

The TrailMate is Magma’s compact Connoisseur Series grill, with a cooking area of 9 x 12 inches, 108 square inches, and a burner rated at 7,500 BTU. The body is 100 percent 18-8 mirror-polished stainless steel, and fold-away legs tuck in when the grill is mounted instead of standing on a surface.

An inner shell funnels grease into a front-access tray, a design the maker describes as reducing flare-ups and heat discoloration. The lid is balanced and lockable so the inner parts stay put in transit, a snap-out radiant plate spreads heat, and sectional grates are sized to fit in sinks for washing. The turbo burner mixes air and fuel ahead of the burner to resist blowouts in wind. The swiveling control valve and regulator are built for 1 lb canisters and adapt to onboard low-pressure LPG or CNG systems with optional valves. Mounts and serving shelves are sold separately.

Pros: the smallest stowage footprint here, a lockable lid, and a grease path that keeps drips off the deck. Cons: the smallest grate and lowest output in this group. Buy if: two people, a small boat, and a tight locker define the brief. Skip if: the grill feeds more than two as a rule. For daysailers the TrailMate’s fold-away legs also let it work on a dock table or a beach picnic table, so one grill covers the boat and the shore without a second unit.

Buying guide

Boat grills are bought on fit first and output second: the right mount, the right locker size, and a fuel connection that matches the boat. The checks below work through those decisions using the published specifications of the five models above and the way each is actually used aboard.

Choosing gas grills for boats by size and mount

Start where the grill will live. A rail-mounted Monterey II Classic stays rigged all season and gives up no locker space, but it needs the mount, sold separately, matched to the rail. A legged grill such as the Sea-B-Que Small or the Spitfire 180 moves between rail, table, and dock, and stows below when the boat is underway.

Then match the grate to the crew. The listings frame the range plainly: 108 square inches on the TrailMate and 148 on the Sea-B-Que Small for one or two people, 176 on the Spitfire 180 for a mid-size crew, and 420 square inches in total on the Monterey II Classic when the whole raft-up comes to dinner. Buying one size up from the usual crew is the common pattern. Remember that grate shape cooks differently from grate area: the Kettle’s round 133 square inches take a ring of items or one pan, while the Sea-B-Que Small’s rectangular 148 square inches take rows, so similar figures can serve different menus. A pedestal mount, the third route, suits a swim platform or a cockpit corner where the rail already carries other gear.

Stainless grades and gauges

Both makers publish their material. Dickinson uses 304 marine-grade stainless steel, in 20-gauge sheet on the Sea-B-Que Small, and Magma uses 18-8 mirror-polished stainless steel across the TrailMate, the Kettle, and the Monterey II Classic. These are the makers’ stated defenses against salt spray, and the polished finish sheds water.

Shape adds strength that gauge alone does not. Dickinson’s octagonal bodies resist flex, and Magma’s Monterey uses a double-lined lower shell. On a boat, where a grill may live outside all season, the body specification matters more than any single output figure, because corrosion ends more boat grills than burners do.

Wind performance and burner design

Wind is the standing problem of boat cooking, and each maker publishes an answer. Magma’s turbo burner premixes air and fuel to resist blowouts, and the Monterey II Classic adds a combustion system described as holding its flame in wind. Dickinson’s octagonal bodies and wind-resistant burner designs answer from the body side.

Lid behavior matters in a breeze as well. Balanced, lockable lids on the Magma models stay where they are set, the Kettle lid is hinged to the body, and Dickinson’s rollaway hoods open within the grill’s footprint. A lid that swings wide over the rail is a liability when the boat rocks, and none of these five has one.

Fuel: canisters, tanks, and onboard systems

Every grill here runs on 1 lb disposable propane canisters through a swiveling valve and regulator. Boats that grill often add a 20 lb tank: the Dickinson models accept one through optional hose kits. Boats with plumbed low-pressure LPG or CNG systems can use Magma’s optional valves to adapt the TrailMate or the Monterey II Classic.

The Dickinson listings state CSA and ABYC approval for marine use, which attaches to the grill in its listed fuel configuration. Changing the fuel route changes the parts involved, so order the hose kit or valve made for the exact model rather than adapting hardware from another grill.

Stowage, weight, and covers

Weight in this group runs from 9.86 lb for the Marine Kettle 3 Original to 25 lb for the Spitfire 180, and widths from the Kettle’s 14 15/16 inch diameter to 24 inches for both Dickinson models. If the grill stows below, measure the locker against the grill’s full footprint, legs folded and latch closed.

Covers and latches protect the grill between outings. The Spitfire 180 includes a vinyl all-weather cover, the Magma lids lock shut so grates and plates stay inside, and Dickinson’s stainless latches secure the hood for transport. A grill that travels in a locker should latch; a grill that lives on the rail should be covered or stainless enough to shrug off weather, and these five are built to that standard. The Monterey II Classic is the exception that proves the stowage rule: with a 24-inch-wide primary grate it is bought to live mounted, not to stow.

FAQ

The questions below cover the decisions boat owners make before buying: how these grills are powered, which mounts they need, how the two kettle and Sea-B-Que sizes differ, and what the warranties say. The answers draw on the catalog and listing facts given for each model above.

How are gas grills for boats powered?

All five models run on propane, most simply from 1 lb disposable canisters through a swiveling valve. The two Dickinson grills accept a 20 lb tank through optional hose kits, and the Magma grills adapt to onboard low-pressure LPG or CNG systems with optional valves. None needs electrical power; ignition is spark, pulse, or piezo by model.

Do I need to buy a mount separately?

For the Magma models, yes: rail and pedestal mounts are sold separately and must match the rail diameter. The Dickinson Spitfire 180 and Sea-B-Que Small include deck legs, so they can stand on a table or deck without extra hardware, and rail mounting remains an added option. Decide the mounting route first, because it changes the parts list.

What is the difference between the two Marine Kettle sizes?

Magma sells the Marine Kettle 3 in two sizes that share a 10,700 BTU burner rating. The Original Size offers 133 square inches of grilling surface at 9.86 lb. The larger Party Size, covered in the companion boating roundup, offers 177 square inches. Both use the radiant plate and dome system and both work as a stove as well as a grill.

How do the Sea-B-Que Small and Spitfire 180 differ?

Both are Dickinson models in 304 marine-grade stainless with 10,000 BTU burners, deck legs, and 1-year and 3-year burner warranties. The Sea-B-Que Small is the lighter, smaller grill at 18 lb with 148 square inches in four porcelain sections. The Spitfire 180 is 25 lb with 176 square inches in two stainless sections, and adds a vinyl cover.

Which of these grills suits a small sailboat?

The Marine Kettle 3 Original and the TrailMate fit the brief. The Kettle weighs 9.86 lb with a 14 15/16 inch diameter and doubles as a stove, and the TrailMate folds to a 9 x 12 inch format with a lockable lid. Both run on 1 lb canisters, both are stainless, and both leave the rail free, which matters when the rail carries other gear.

What warranties do these makers list?

Dickinson lists a 1-year product warranty and a 3-year burner warranty for both of its grills here. Magma lists a 1-year warranty for the Marine Kettle 3. Warranty terms attach to the exact model, so read the listing or catalog entry for the grill you plan to order, and keep the model number with the boat’s papers.

Conclusion

The Monterey II Classic is the pick for boats that host, with 420 square inches of total area and an 18,000 BTU burner behind a lockable lid. The Spitfire 180 is the balanced middle choice, and the Kettle 3 Original wins on weight at 9.86 lb. Match the mount and the locker first, and any of these five will serve for seasons.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.