Key takeaways
- Five DJ mixers for PC compared: 2-channel controllers with built-in audio interfaces for Serato, rekordbox and DJUCED, with jog sizes, pads and mic inputs.
The best dj mixers for pc are really controllers with built-in sound cards: they put jog wheels, faders and pads under your hands while the PC does the playback. These five cover Serato, rekordbox and DJUCED, from a battle-style scratch layout to a controller with its own drum machine. All five run from USB power alone.
Quick verdict
The Pioneer DJ DDJ-FLX4 is the easiest starting point, with smart mixing aids and both rekordbox and Serato support. The Hercules DJControl Inpulse 500 has the best outputs and a hardware mixer for external sources, the Roland DJ-202 adds a drum machine, and the DDJ-REV1 is built for scratch practice.
| Model | Software | Jog wheels | Pads | Audio interface | Mic input |
|---|---|---|---|---|---|
| Pioneer DJ DDJ-FLX4 | rekordbox, Serato DJ Lite and Pro | 111.6 mm | 8 per deck | 24-bit/48 kHz | 1/4-inch TS |
| Hercules DJControl Inpulse 500 | Serato DJ Lite, DJUCED | 5.5 in (14 cm) | 16 RGB | 24-bit/44.1 kHz | Balanced 1/4-inch, plus aux input |
| Numark Mixtrack Pro FX | Serato DJ Lite, Pro upgrade ready | 6 in | 16 | 24-bit/44.1 kHz | 1/4-inch TS |
| Roland DJ-202 | Serato DJ Lite, Pro upgrade ready | Large, low-latency platters | 8 | 24-bit/48 kHz | 1/4-inch, with vocal effects |
| Pioneer DJ DDJ-REV1 | Serato DJ Lite, Pro supported | 154 mm | 8 per deck, in the mixer section | 24-bit/48 kHz | 1/4-inch TS |
How we selected
Every unit here is a 2-channel DJ controller designed to run DJ software on a PC or Mac, with its own built-in audio interface, USB power and a microphone input. We weighted software fit first, then jog wheel size and layout, performance pads, and the outputs you get for speakers and headphones.
The category has settled into a pattern: the software does the heavy lifting, and the hardware decides how physical the mixing feels. Where the models differ is intent. Two of them, the DDJ-FLX4 and the Inpulse 500, are teaching tools with guides and automatic aids. The Mixtrack Pro FX and DDJ-REV1 aim at performance tricks, FX paddles in one case and a battle layout in the other. The DJ-202 goes its own way with a built-in TR drum machine and sequencer. All specifications below come from pages published by each maker or carrying the maker’s full details.
One model from the original plan was dropped during verification: the Native Instruments Traktor Kontrol S2 Mk3 is now discontinued and replaced in that maker’s range, so it is listed under Not verified in the sources file rather than recommended here.
The best dj mixers for pc in detail
All five are bus-powered 2-channel controllers, but they suit different DJs: beginners who want the software to help, scratch learners who want a battle layout, and performers who want pads, effects and streaming microphones within reach. The differences show up the moment your hands land on them.
Pioneer DJ DDJ-FLX4
The Pioneer DJ DDJ-FLX4 is the most forgiving first controller here. It works with rekordbox on Mac, Windows, iOS and Android and with Serato DJ Lite out of the box, and its Smart features quietly handle the hard parts of mixing while you learn the rest.
Smart Fader adjusts BPM and bass levels automatically for smooth transitions between tracks with different tempos, and Smart CFX applies effects with a single knob turn. The built-in sound card runs at 16/24-bit and 44.1/48 kHz with a 103 dB signal-to-noise ratio and distortion under 0.005%, and it can record your mix into rekordbox over the same USB connection. Streaming services including TIDAL, Beatport, Beatsource and SoundCloud Go+ work through rekordbox, with subscriptions required. Each deck has 8 back-lit rubber performance pads covering hot cues and sampler functions, with pad counts varying by software: rekordbox offers 8 hot cues and 16 sampler slots, Serato DJ Lite 4 of each.
The jog wheels measure 111.6 mm, the smallest here, and the layout is compact at 18.98 x 10.74 x 2.33 inches and 4.63 lb. Connections are a single microphone input on a 1/4-inch TS jack, a master output on RCA and a 3.5 mm headphone socket, with two USB Type-C ports on the back. A useful streaming touch: microphone sound is output over USB, so your voice reaches the PC mix without extra hardware. The unit is class compliant, needs no driver, and runs on USB bus power. Serato DJ Pro is supported, but the license is not included.
Buy it if you are starting out and want the controller to help with beatmatching while you learn, or if you switch between rekordbox and Serato. Skip it if you want large jog wheels for scratching or balanced master outputs for bigger sound systems.
- Pros: Smart Fader and Smart CFX mixing aids for beginners
- Pros: Works with rekordbox and Serato DJ Lite, class compliant
- Pros: Microphone audio sent over USB for streaming
- Cons: Smallest jog wheels in this list
- Cons: Serato DJ Pro license not included
Hercules DJControl Inpulse 500
The Hercules DJControl Inpulse 500 is the most complete standalone package here: a 2-deck controller for Serato DJ Lite and DJUCED with a hardware mixer section that keeps working on external sources even when the software is not in play. That independence is rare in this class.
The jog wheels are 5.5 inches (14 cm) across with touch detection for scratching, and 16 back-lit RGB rubber pads handle performance duties. A dedicated Filter/FX area combines filter and effects moves, and Beatmatch Guide light guides, supported by both DJUCED and Serato DJ Lite, show you which way to nudge a track and when the beats line up. The audio interface runs at 24-bit/44.1 kHz. Streaming covers TIDAL and SoundCloud GO+ in Serato DJ Lite and Beatport LINK and Beatsource LINK in DJUCED, and licenses for both Serato DJ Lite and DJUCED are in the box.
What sets it apart is the hardware input mixer. An auxiliary input on 2 x RCA and a 3.5 mm mini-jack accepts a phone, media player or wireless microphone receiver, with its own AUX FILTER knob that works independently of the software, and the balanced 1/4-inch microphone input has high and low EQ knobs that also work without software. Outputs are the strongest here: master on both 2 x 1/4-inch jacks and 2 x RCA, plus headphone sockets in both 3.5 mm and 1/4-inch sizes. The body has a metal backing plate, measures 21.3 x 11.7 x 2.8 inches and weighs 7 lb, and four retractable feet lift it 3.1 inches so cables run underneath and the surface sits above spill level at a party.
Buy it if you play parties and events where a backup phone source or a microphone must work no matter what the laptop is doing. Skip it if you want rekordbox support or a lighter bag; at 7 lb it is the heaviest controller here.
- Pros: Hardware aux and mic mixing that works without software
- Pros: Master outputs on 1/4-inch jacks and RCA
- Pros: Beatmatch Guide light guides for learning
- Cons: No rekordbox support
- Cons: Heaviest unit in this list at 7 lb
Numark Mixtrack Pro FX
The Numark Mixtrack Pro FX is a 2-channel Serato controller built around performance tricks: big jog wheels, FX paddles borrowed from battle mixers, and pads that include a fader cuts mode for turntablist-style moves. It is aimed squarely at DJs who want to perform, not just blend.
The jog wheels are 6-inch capacitive-touch units, the largest here alongside the DDJ-REV1, with grooved sides for nudging tracks into place. Six dedicated effects buttons cover Echo, Reverb, Flanger, Phaser, HPF and LPF, fired by dual paddle triggers: push a paddle down for a momentary burst or up to latch the effect on. The 16 multi-function backlit performance pads, 8 per deck, cover Hot Cues, Auto Loop, Sample and Fader Cuts, the last of which emulates a 1-4 click flare crossfader effect from the pads. A dedicated Auto Loop function with Loop Multiplier buttons lengthens or shortens loops for build-ups, and the mixer section carries full 3-band EQ and filter knobs per channel.
The built-in audio interface runs at 24-bit/44.1 kHz. Serato DJ Lite for Mac and PC is included and pre-mapped, the controller is upgrade-ready for Serato DJ Pro, and streaming from TIDAL and SoundCloud works inside Serato DJ Lite. Outputs are a single RCA stereo pair for the master, headphone sockets in 1/4-inch and 1/8-inch sizes, and a 1/4-inch TS microphone input. It is USB bus powered, measures 21.1 x 9.7 x 2.0 inches and weighs 2.4 kg.
Buy it if you want to learn scratching and FX techniques on generous jog wheels without spending on a pro controller. Skip it if you need balanced or 1/4-inch master outputs, or if your main software is anything other than Serato.
- Pros: 6-inch jog wheels and battle-style FX paddles
- Pros: Fader Cuts pad mode for scratch techniques
- Pros: Serato DJ Lite included, Pro upgrade ready
- Cons: RCA-only master output
- Cons: Serato-only software support
Roland DJ-202
The Roland DJ-202 does something none of the others attempt: it builds a Roland TR drum machine and a 16-step sequencer into a 2-channel, 4-deck Serato controller, so you can program beats over your tracks while you mix. Nothing else in this group tries anything like it.
Using Roland’s ACB (Analog Circuit Behavior) technology, the DJ-202 recreates the sounds of the classic TR drum machines, with Bass Drum, Snare Drum, Closed Hat, Open Hat, Tom, Rim, Clap and Ride sounds to layer and sequence. The onboard sequencer, programmed from the performance pads, drives the TR sounds or your own sounds loaded into Serato Sampler’s four sample slots, each with its own volume control, and everything syncs automatically to your Serato library. An Inst-Rec mode captures sampler sequences in real time, and a MIDI output connector syncs external MIDI devices and instruments to the sequencer. The 8 performance pads cover Hot Cue, Loop, Sequencer and Sampler modes.
For mixing, there are large low-latency platters, a Deck Select button for switching among four decks, channel filters and Serato FX through three FX Select buttons per deck. Audio runs at 24-bit/48 kHz with a frequency response of 20 Hz to 22 kHz. The 1/4-inch microphone input has its own processing: onboard reverb and echo effects, low-cut EQ and a noise gate for cleaning up background noise. Serato DJ Lite is unlocked by the controller; the paid Serato DJ Pro upgrade adds 32 sync-able sampler slots over four banks, the full iZotope FX collection and software recording. Master output is RCA only at 2.0 Vrms, headphones are a 1/4-inch stereo jack, and the unit is USB bus powered at 500 mA, measuring 478 x 297 x 62 mm and weighing 2.1 kg.
Buy it if you perform your own beats and remixes live, or want a microphone channel with its own effects for hosting. Skip it if you only mix tracks and would never open the sequencer; you would be paying for the drum machine either way.
- Pros: Built-in TR drum machine with a 16-step sequencer
- Pros: MIDI output for syncing external gear
- Pros: Microphone input with reverb, echo and a noise gate
- Cons: RCA-only master output
- Cons: Serato DJ Pro is a paid upgrade
Pioneer DJ DDJ-REV1
The Pioneer DJ DDJ-REV1 arranges a 2-channel controller like a battle setup: two turntable-style decks with the mixer section between them, tempo sliders running horizontally, and the performance pads moved into the mixer where a scratch DJ’s hands already are.
The layout emulates a DJM-S series mixer with PLX turntables. Tempo sliders are 60mm, longer than those on the DDJ-SB3, for finer tempo control, and the jog wheels are 154 mm, the same size as on the higher DDJ-SR2. Lever FX paddles apply Serato effects in short bursts when held down or lock them on when pushed up. The Tracking Scratch pad mode returns the track to the cue point automatically when you reverse direction or lift your hand, using selectable Scratch Crossfader Cuts patterns, and Scratch Bank loads scratch samples from 4 banks assigned in the software. Pad modes cover Hot Cue, Auto Loop, Tracking Scratch, Sampler, Trans and Scratch Bank, with 4 hot cues per deck, manual and auto loops, channel fader start, crossfader start and crossfader curve adjustment.
The sound card runs 24-bit/48 kHz with a 103 dB signal-to-noise ratio and distortion under 0.005%. A first at this level, per Pioneer DJ: microphone audio is mixed with the master output and sent to Serato DJ Lite, so you can talk over a stream without an extra soundcard or mixer. Deck 3/4 control plays tracks from any of the four Serato DJ Lite decks. The controller is class compliant with no driver to install, supports Serato DJ Pro with a trial offered (license not included), and connects with one microphone input on a 1/4-inch TS jack, a master output on RCA and a 3.5 mm headphone socket. It measures 526.0 x 255.5 x 59.2 mm, weighs 4.63 lb and runs on USB bus power.
Buy it if you are learning to scratch or play open-format sets and want a layout that matches battle mixers. Skip it if you need a 1/4-inch headphone socket or 1/4-inch master outputs; both are absent here.
- Pros: Battle layout with 154 mm jog wheels and 60mm tempo sliders
- Pros: Tracking Scratch and Scratch Bank learning features
- Pros: Microphone mixed into the USB stream for broadcasting
- Cons: Headphones only on a 3.5 mm socket
- Cons: Serato DJ Pro license not included
Buying guide
Controllers in this class share most headline features, so the deciding factors are software, layout and connections. Work through these five points before choosing, and the right model usually picks itself. Start with the software question and work down the list.
Match the controller to your software first
A controller only feels right with the software it was mapped for. The DDJ-FLX4 covers rekordbox and Serato, the Inpulse 500 covers Serato DJ Lite and DJUCED, and the Numark, Roland and second Pioneer unit are Serato designs. If your music library and playlists already live in one program, start there.
Also check what the included license covers: Serato DJ Lite is free with all the Serato models here, while Serato DJ Pro is a paid upgrade or separate license on every one of them.
Jog wheel size and layout
Bigger jog wheels give your hand more surface for scratching and finer control when nudging. The Mixtrack Pro FX and DDJ-REV1 lead here at 6 inches and 154 mm, the Inpulse 500 follows at 5.5 inches, and the DDJ-FLX4 trades size for portability at 111.6 mm.
Layout matters too: the REV1’s horizontal tempo sliders and mixer-section pads suit battle technique, while the conventional layouts suit blending and long transitions.
Check the outputs before you buy speakers
Most of these controllers offer only an RCA master output, which is fine for home speakers and small powered monitors but limiting for larger systems. The Inpulse 500 is the exception, adding 1/4-inch master jacks. Headphone sockets vary as well: the REV1 offers only a 3.5 mm socket, while the Inpulse 500 and Mixtrack Pro FX provide both sizes.
Check your headphones and speakers against the table before ordering.
What makes dj mixers for pc different from club mixers
A club mixer is an audio device in its own right; a PC controller is mostly a remote control with a sound card inside. The PC renders the audio, applies most effects and holds your library, while the controller provides the physical controls and the audio outputs.
That is why these units are light and bus-powered next to club hardware, and why none of them makes sound on its own without a computer attached, the Inpulse 500’s hardware aux and mic mixer aside.
Think about microphones and streaming
If you host, stream or make announcements, the microphone path matters. The DDJ-FLX4 and DDJ-REV1 both send microphone audio over USB into the software mix, ready for a stream. The DJ-202 processes the microphone with reverb, echo, low-cut EQ and a noise gate.
The Inpulse 500 shapes its mic input with hardware EQ that works even with the software closed. All five accept a standard dynamic microphone on a 1/4-inch jack.
FAQ
Answers to the questions PC DJ buyers ask most, about software compatibility, sound cards, recording, license tiers and whether these controllers can work away from a computer. Most answers are short, and several come down to which software tier you run.
Do dj mixers for pc work with any DJ software?
No. Each controller is mapped for specific software, and that mapping decides how well the pads, jogs and effects line up with the program. The DDJ-FLX4 is the flexible one here, covering rekordbox and Serato. The others are built for Serato DJ Lite first, with the Inpulse 500 adding DJUCED.
Third-party programs can sometimes be mapped manually over MIDI, but the dedicated features rarely translate completely.
Do I need a separate audio interface?
Not with any of these five. Each has a built-in audio interface that carries the master output and the headphone cue mix, at 24-bit/44.1 kHz on the Hercules and Numark units and 24-bit/48 kHz on the Pioneer DJ and Roland models. A separate interface only enters the picture if you later add turntables, CD players or a bigger mixer to the setup.
Can I record my mixes on the PC?
Yes, through the software. The DDJ-FLX4 records into rekordbox over USB, and Serato DJ Pro adds software recording for the Serato controllers, which the DJ-202’s Pro upgrade lists among its additions. Serato DJ Lite is more limited, so if recording every set matters, plan on the Pro tier for the Serato models or use the FLX4 with rekordbox.
Can these controllers work without a PC?
Almost entirely no: they are controllers, and the computer generates the sound. The one partial exception is the DJControl Inpulse 500, whose hardware mixer still passes and filters an auxiliary source and its microphone input with the software closed, which can keep music playing through a laptop failure.
For fully standalone DJing you would need a different class of device with its own screen and media playback.
Which controller is best for learning to scratch?
The DDJ-REV1, by design. Its battle layout, 154 mm jog wheels, horizontal 60mm tempo sliders and Tracking Scratch mode are all aimed at scratch technique, and its pads sit in the mixer section where battle DJs expect them. It is the only controller here laid out like a turntablist rig.
The Mixtrack Pro FX is the alternative, with equally large jog wheels and a Fader Cuts pad mode that mimics crossfader tricks while you build the real skill.
Conclusion
Start with your software and the choice narrows fast. The DDJ-FLX4 is the most forgiving first controller, the Inpulse 500 the most self-sufficient at events, the Mixtrack Pro FX the value pick for big jogs and FX paddles, the DJ-202 the creative outlier with its drum machine, and the DDJ-REV1 the one built for scratching.