Updated Nov 15, 2026· 16 min read

Key takeaways

  • Compare six commercial ice cream makers for creamy ice cream by batch size, hourly output, overrun control, cooling, power and footprint, from stated figures.

A shop that churns its own base needs a machine rated for daily production, not a home unit in a bigger shell. This guide compares the commercial ice cream makers for creamy ice cream whose maker pages state batch size, hourly output and controls in writing. Batch freezers, gelato machines and soft serve units are all covered.

Quick verdict

Six machines cover the commercial range in this comparison, and they divide by format. Two Italian gelato machines from Nemox anchor the batch side, the Emery Thompson CB-350 covers American batch freezing, the Lello Musso Pola 5030 covers small cafes, and two soft serve units serve product at the counter.

For a gelato program with automatic storage, the Nemox Gelato 5K Crea NTC i-Green is the compact pick, and its bigger sibling, the GELATO 12K ST, is the floor-standing step up at 12 kg per hour. For scoop shops that freeze in batches, the CB-350 fits the pattern. For service by the cone, the DF200 and the 6235-C take opposite ends of the output range.

Texture claims come from the makers, and this guide reports them as maker wording. What can be compared on paper is production: batch size, cycle time, hourly output, overrun control and electrical service. Those figures drive the recommendations.

Product Type Best for Key spec Main limit
Nemox Gelato 5K Crea NTC i-Green Countertop gelato machine Automatic production and storage 1.25 kg per cycle, 5 kg per hour Maker page lists the 220-240V version
Nemox GELATO 12K ST Free-standing gelato machine Highest batch output here 3 kg per cycle, 12 kg per hour Floor space and 79.7 kg weight
Emery Thompson CB-350 Countertop batch freezer Overrun control with 11 presets 12 quart batch, 115V No hourly output figure on the page
Lello Musso Pola 5030 Compressor batch machine Small cafes and caterers 2 quart batch, self-contained compressor Smallest batch in the group
SaniServ DF200 Countertop soft serve, 1 head Compact single flavor 7 qt mix, 120 servings per hour One flavor only
Spaceman 6235-C Countertop soft serve, twin twist Two flavors plus twist at volume Over 350 4 oz servings per hour Needs a 208-230V circuit

How we selected

Selection started from commercial positioning stated on the product page: a maker or listing page that presents the machine for shops, cafes, restaurants or gelaterias, with production figures in numbers. Home machines with commercial styling were set aside, and so were the best known fleet brands, to keep this list distinct.

Each surviving machine was read for the same fields: batch size or hopper capacity, cycle time, hourly output, overrun or density control, cooling method, dimensions, weight and electrical service. Where a page stayed silent on a field, the product notes say the maker does not state it.

Texture language is handled with care throughout. When a maker describes its machine as producing creamy or smooth product, the article reports it as the maker description. The comparisons rest on stated production figures and controls, the parts of a listing a buyer can hold the maker to.

Commercial ice cream makers for creamy ice cream picks

The six picks below span the three commercial formats: automatic gelato machines that store what they make, batch freezers that hand product off to a hardening cabinet, and soft serve machines that dispense to order. Each entry leads with the production figures its own page prints.

Nemox Gelato 5K Crea NTC i-Green

The Gelato 5K Crea NTC i-Green is Nemox countertop machine for restaurants, pastry shops and small gelato programs, built in Italy and sold for commercial work. Its stated production is 1.25 kg, or 1.75 L, per cycle in 12 to 15 minutes, which the maker totals as 5 kg, or 7 L, per hour.

The control story is the reason this model leads the group. The maker describes dedicated software managing four production programs, listed as classic gelato, semi-soft gelato, granita and quick blast chilling of liquids, combined with four storage programs. The software manages gelato density and starts the selected storage program automatically, so finished product is held at serving temperature. The maker describes the output of the series as fresh and creamy at the ideal tasting temperature, in the maker wording.

The printed hardware figures are: dimensions of 465 by 480 by 395 mm, a net weight of 33.3 kg, R290 refrigerant, a stainless steel body and mixing blade with interchangeable copolymer scrapers, a lid opening for adding ingredients during operation, a sensor that stops the blade when the lid is lifted, and a drain system. One planning note: the maker page opened lists the 220-240V, 500W version, so check the unit voltage against your supply before purchase.

  • Pros: automatic production and storage programs; density control; 12 to 15 minute cycles; stainless body and blade; drain system.
  • Cons: maker page lists a 220-240V version; 1.25 kg batch is small for a busy gelateria; storage is inside the same bowl.
  • Buy if: a restaurant or pastry program wants gelato made and held in one machine.
  • Skip if: hourly demand runs past 5 kg, or a US-voltage unit is required and none is confirmed.

Nemox GELATO 12K ST

The GELATO 12K ST is the free-standing step up in the same Nemox line, a machine on wheels for gelaterias and high-volume venues. Its stated production is 3 kg, or 4 L, per cycle in 10 to 15 minutes, which the maker totals as 12 kg, or 16 L, per hour, the highest batch output in this comparison.

The maker describes the K series as designed for large productions of 2 to 3 kg per cycle, with front extraction, a stainless steel body and mixing blade, and interchangeable copolymer scrapers. An inverter allows control of density and regulation of blade speed, and storage is programmable rather than automatic. The maker also notes four wheels, two with brakes, air cooling, and a drain system.

The printed figures are: dimensions of 450 by 675 by 1150 mm, a net weight of 79.7 kg, R290 refrigerant, and a power supply listed as 220-240V at 1200W, with the maker wording that the air-cooled machine requires a connection to a normal 10A electrical outlet. As with the smaller Nemox, a US buyer should confirm the voltage version on offer first.

  • Pros: 12 kg per hour stated output; front extraction; inverter density and speed control; wheels; programmable storage.
  • Cons: floor-standing footprint; 79.7 kg net weight; maker page lists a 220-240V version; storage is programmable, not automatic.
  • Buy if: a gelateria needs production in 3 kg cycles with front extraction and storage settings it controls.
  • Skip if: counter space is the only space, or the site cannot take a tall floor unit.

Emery Thompson CB-350

The CB-350 is Emery Thompson countertop batch freezer, listed at 12 quart capacity on 115V service. The dealer page opened carries the maker description of the model as a counter top batch freezer designed to operate continuously with minimal maintenance, aimed at ice cream businesses.

The distinguishing control is the IOC, the Infinite Overrun Control. The page describes 11 presets to help the operator choose the right dasher speed for the overrun and texture of a given product, plus a manual speed setting. The IOC touch screen also carries built-in slideshow tutorials for set-up, operation, maintenance and troubleshooting, presented as a staff training aid. Overrun is the air worked into the product, so a dasher speed control is the closest thing a batch freezer offers to a texture dial, in the maker framing.

The stated product range is wide: the page lists homemade ice cream, super-premium ice cream, gelato, frozen yogurt, custard, dairy-free ice cream, cream ices, fresh fruit sorbets, frozen lemonade, Italian ice and sherbet, and notes the maker encourages adding cookies, nuts, candies and fresh fruit directly into the machine. The printed dimensions are 18.5 inches wide, 29.5 inches deep and 31.5 inches high, with a weight of 300 lbs. The opened page states no hourly production figure, so none is claimed here.

  • Pros: 11 overrun presets plus manual dasher speed; 12 quart batches; built-in training tutorials; wide stated product range; 115V service.
  • Cons: no hourly output figure on the opened page; 300 lbs is heavy for a countertop unit; product needs a hardening cabinet after the batch.
  • Buy if: a scoop shop wants batch freezing with deliberate overrun control and staff training built in.
  • Skip if: a stated gallons-per-hour rating is required to plan production.

Lello Musso Pola 5030

The Pola 5030 is the small end of commercial production in this group: a 2 quart batch machine built in Italy by Musso and sold under the Lello name in the United States. The brand page describes it as a larger, more powerful version of the home 4080 model, and states that the 5030 suits small cafes, restaurants and caterers.

Its system is deliberately simple. The brand page lists all-metal construction, a self-contained compressor, and mechanical controls, with a manual timer and direct motor control rather than a screen. There is no bowl to pre-freeze and no ice or salt; the compressor freezes in the built-in stainless bowl, and the page gives most batches at about 20 to 30 minutes depending on recipe and room temperature. The brand describes the line as producing dense, smooth results with low air content, in the brand wording.

The trade-offs are scale and paperwork. A 2 quart batch suits a cafe dessert program or a caterer, not a scoop shop counter at peak hour, and the brand page prints no hourly output figure and no dimension table. An owner review quoted on the brand page puts the machine at about 66 pounds and about 20 inches wide, 14 inches deep and 12-1/4 inches high, figures to confirm against the model sheet.

  • Pros: self-contained compressor with no pre-freezing; all-metal construction; simple mechanical controls; commercial suitability stated by the brand.
  • Cons: 2 quart batch is the smallest here; no hourly output or dimension table on the brand page; built-in bowl does not lift out.
  • Buy if: a small cafe or caterer wants batch gelato and ice cream without a production footprint.
  • Skip if: the program needs more than a few quarts a day, or a printed hourly rating is required.

SaniServ DF200

The DF200, sold as the DuraFreeze 200, is SaniServ compact countertop soft serve machine: one head, one 7 quart mix reservoir, and self-contained air-cooled refrigeration. The listing page opened shows the machine in stock, and its maker description line lists UL, NSF and cUL marks.

Output is stated in servings rather than quarts: the page gives dispensing at two 3 oz servings per minute, and its specification table totals 120 servings per hour. Consistency is managed by an automatic torque control, described on the page as managing consistency during freezing. The dasher is stainless steel with low-friction scraper blades, and the controls are push-button.

The printed figures are: 115V, 60 Hz, single phase, 15 amps, a 1/2 HP dasher and a 1/2 HP compressor, R404A refrigerant, dimensions of 14 inches wide, 23.7 inches deep and 25.4 inches high, and a weight of 172 lbs. The page prints the warranty as 90-day parts, 30-day labor and 1-year compressor, and notes it is not honored for residential use, which underlines the commercial rating.

  • Pros: compact 14 inch width; standard 115V service; automatic torque control; few parts to disassemble; in stock on the opened page.
  • Cons: one flavor only; 120 servings per hour is the lowest output here; short printed warranty terms; 172 lbs needs a rated counter.
  • Buy if: a cafe, diner or concession counter wants single flavor soft serve on a standard circuit.
  • Skip if: two flavors, a twist option or high peak volume are part of the plan.

Spaceman 6235-C

The 6235-C is Spaceman twin twist countertop soft serve machine, gravity-fed, serving two flavors plus a twist from two 1.8 quart freezing cylinders and two 12.7 quart hoppers. The maker rates it at over 350 4 oz servings per hour, the highest service output in this comparison.

The maker page describes the hardware behind that rating: a patented flooded evaporator design, a single-piece auger the maker calls the V5, and a dual-system gravity-fed air inlet that works with the auger to manage overrun. The maker claims smaller ice crystals and a smooth, creamy mouthfeel from that system, reported here as maker wording. Inverter motor control, separate hopper cooling controls, dual digital interfaces and hopper agitators are listed, and standby mode holds the hopper and cylinders below 40 degrees F overnight.

The printed installation figures are: 21 inches wide, 30 inches deep and 39 inches high, with 6 inches of clearance called for on the left, and electrical service of 208-230V, single phase, 16 total amps on a NEMA L6-20P plug. That circuit is the main planning hurdle: the 6235-C needs a dedicated higher-voltage line and the qualified electrician visit the maker recommends.

  • Pros: two flavors plus twist; over 350 servings per hour stated; refrigerated hoppers with agitators; standby mode; digital controls.
  • Cons: requires a 208-230V circuit and L6-20P receptacle; 39 inch height limits under-shelf counters; gravity feed gives less overrun adjustment than a pump model.
  • Buy if: a shop needs twin twist service at real volume from a countertop footprint.
  • Skip if: the site has only standard 115V outlets, or one flavor at low volume is the whole plan.

Buying guide

Commercial machines divide first by format and only then by brand. The five sections below walk through the decisions that separate these six: batch against continuous service, hourly output against batch size, overrun control, cooling and cleaning, and electrical service.

Choose the format before the brand

Batch machines make a set quantity, then stop: the Nemox pair, the CB-350 and the Pola 5030 all work this way, and their product is drawn off into pans or tubs. Soft serve machines like the DF200 and the 6235-C freeze continuously and dispense to order, so their product is served at the machine.

The format decides the rest of the kitchen. A batch program needs a hardening cabinet or freezer space for the pans a machine fills, plus staff time at the end of every cycle. A soft serve program needs mix storage, a reachable dispense point, and a daily cleaning routine at the machine. Neither format is better in general; the menu should be settled first.

Match hourly output to the busiest hour

Output figures only compare inside a format. On the batch side, the Nemox 5K Crea states 5 kg per hour from 1.25 kg cycles, the 12K ST states 12 kg per hour from 3 kg cycles, and the CB-350 and Pola 5030 state batch sizes without hourly totals. On the service side, the DF200 states 120 servings per hour and the 6235-C over 350.

The planning number is the busiest hour, not the average day. A cafe selling forty servings across an afternoon is served by any machine here, while a stand selling two hundred servings in a summer evening hour needs the top of the range. Batch buyers should count cycle time closely: a 12 to 15 minute cycle only reaches its hourly figure when a load goes in as soon as the finished batch comes out.

Understand overrun and density controls in commercial ice cream makers for creamy ice cream

Overrun is the air incorporated into the product as it freezes, and it is the main lever on texture that a machine page can describe. The CB-350 addresses it with 11 dasher speed presets plus a manual setting, the Nemox machines manage density through software or an inverter, and the 6235-C uses its gravity-fed air inlet and auger design.

What a buyer can verify from a page is the control, not the result. Maker texture claims describe what the maker aims at; the delivered texture also depends on the mix, its fat and sugar balance, and serving temperature. A machine with a density or overrun control at least gives the operator a repeatable setting to return to once a recipe is dialed in.

Plan cooling, cleaning and daily routine

Every machine here is air-cooled and self-contained, which keeps installation simple but puts the cleaning routine on the operator. The Nemox machines add a drain system, the DF200 has few parts to disassemble, and the 6235-C maker page calls for cleaning, sanitizing, disassembly, inspection and lubrication of product-contact parts.

Soft serve machines carry the heavier daily routine because mix sits in hoppers and cylinders between services; standby modes, like the one the 6235-C spec sheet describes for overnight holding below 40 degrees F, exist to manage that gap. Batch machines empty at the end of a cycle, so their routine is a wash between runs. Staffing for the routine matters as much as the machine choice.

Confirm electrical service and counter strength

Electrical service splits this group cleanly. The CB-350, Pola 5030 and DF200 run on standard 115V service, the DF200 at 15 amps. The 6235-C needs a 208-230V, 16 amp circuit with a specific plug, and the two Nemox pages list 220-240V versions, so the exact unit on offer must be confirmed first.

Weight is the other installation figure buyers skip. The countertop machines here run from 33.3 kg for the Nemox 5K Crea to 300 lbs for the CB-350, and a light counter may not carry a batch freezer through a summer of daily cycles. The 12K ST avoids the question by standing on its own wheels at 79.7 kg, but asks for floor space.

FAQ

Most questions about commercial machines come back to format, output and what a maker claim promises. The answers below stay with the figures and wording printed on the pages opened, and flag the points where a buyer has to ask the maker directly before buying.

What is the difference between a batch freezer and a soft serve machine?

A batch freezer freezes a load of mix in a cylinder, then draws the product off into containers for hardening or storage. The Emery Thompson CB-350 and the Nemox machines work this way. A soft serve machine holds mix in a refrigerated hopper and freezes it continuously, dispensing servings to order, as the SaniServ DF200 and Spaceman 6235-C do.

The practical difference is where the product waits. Batch product waits in a freezer and is scooped from pans, which suits shops that make flavors ahead of service. Soft serve waits in the machine and is served at dispense consistency, which suits counters selling cones and cups made to order. Each format needs its own cleaning and storage routine.

Do commercial ice cream makers for creamy ice cream guarantee a creamy result?

No machine page can guarantee that, and the claims here are maker claims. Spaceman describes its evaporator and auger system as producing smaller ice crystals and a smooth, creamy mouthfeel, and Nemox describes its Crea series output as fresh and creamy at the ideal tasting temperature. Both statements are the makers describing their design aims.

What the pages do prove is control: overrun presets on the CB-350, density management on the Nemox machines, torque control on the DF200. Delivered texture still depends on the mix recipe, its temperature going in, and how the product is stored and served. A buyer should weigh the stated controls and output, and treat texture language as a claim to test with their own mix during a demonstration.

How much can a small cafe realistically produce?

At the small end of this group, the Lello Musso Pola 5030 makes 2 quart batches in about 20 to 30 minutes per the brand page, suiting a dessert program with a few house flavors. The Nemox 5K Crea states 1.25 kg cycles and 5 kg per hour with automatic storage, a step up for a cafe selling gelato through the day.

The honest limit is labor rhythm rather than motor size. Batch figures assume the operator unloads, reloads and restarts on time, every cycle. A one-person cafe counter will land below the stated hourly figure, which is why matching the machine to the busiest hour matters more than matching it to the average day.

What electrical work should a buyer expect?

It depends on the machine. The DF200 runs on 115V at 15 amps, the CB-350 is listed at 115V, and the Pola 5030 is a standard-service countertop machine. The Spaceman 6235-C needs 208-230V, single phase, 16 total amps and a NEMA L6-20P receptacle, and its maker recommends an electrician verify the circuit first.

The two Nemox pages opened list 220-240V versions of the 5K Crea and the 12K ST, at 500W and 1200W. Nemox sells into the US market through distribution, so a buyer should confirm the voltage and plug of the exact unit quoted before planning around a standard outlet. That five minute question stops a machine sitting idle after delivery.

Are gelato machines and ice cream machines the same equipment?

Largely yes, with control differences. The Nemox machines are sold as gelato machines and list ice cream among their products, the CB-350 lists gelato alongside ice cream and sorbet, and the Spaceman page lists gelato as a supported application for a soft serve machine. The equipment category overlaps almost completely.

The differences that matter are the ones printed on the pages: batch size, cycle time, density or overrun control, and storage. Gelato is traditionally churned slower and served warmer than ice cream, so a machine with density control and storage programs, like the Nemox Crea line, is built around that style of service.

Conclusion

Choose by format and stated output: Nemox 5K Crea for automatic countertop gelato, 12K ST for floor-standing volume, CB-350 for batch overrun control, Pola 5030 for a small cafe, DF200 for compact soft serve, and 6235-C for twin twist at volume, with the electrical service confirmed before any order.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.