Key takeaways
- Compare aluminum sheet for cookers by reflectivity, thickness, alloy and cut size, with six verified sheets for reflectors, liners, trays and cooker covers.
Sheet for a cooker is not one job but three: a reflector that throws light and heat back, a liner that takes splashes and washing, and a cover that must stay flat. The right aluminum sheet for cookers depends on which of those jobs leads, and the six listings below split along exactly those three lines.
Quick verdict
For reflector work, the mirror finish sheets lead, with stated reflectivity from 83 percent to 86 percent and higher grades listed beyond that. For a plain liner or tray, the mill finish 1100-H14 sheet leads on stated strength figures and food processing use named on its own page.
Thickness runs from 0.1 mm foil-like mirror coil to 10 mm anodized plate rows in these listings, so gauge is the first filter. The second filter is surface: mirror, anodized mirror, reflective one side, or plain mill finish. Match those two lines to the cooker part and the shortlist shortens fast.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Lighting Sheet Reflective Surface One Side LRS-032-485-965 | Reflective sheet | Large flat reflectors | 0.032 inches thick, 83 percent reflectivity | One fixed sheet size |
| 1050/1060/1070 Aluminum Mirror Sheet Coil | Mirror coil | Curved solar cooker reflectors | 0.1 to 3.5 mm thick | Coil format needs cutting |
| Mirror Aluminum Circle 1100, 1060 | Color coated mirror circle | Cooker covers and lids | 0.3 to 1.0 mm thick | Maximum diameter 1000 mm |
| Mirror Finish Aluminum Sheet/Coil | Mirror sheet and coil | Cut to size reflector panels | Reflectance 86 percent | Thin range only |
| Anodized Aluminium Mirror Sheet/Coil | Anodized mirror sheet | Appliance panels and liners | 1.0 to 10 mm thick | Mill range, quote based |
| 1100-H14 Aluminum Sheet 0.040 inches | Mill finish sheet | Liners, trays and spun parts | 18 KSI tensile strength | No reflective finish |
How we selected
Selection drew on published supplier and listing pages for aluminum sheet whose own text names reflector, solar collector, cooker cover, appliance panel, or food processing use. Reflectivity, thickness range, alloy, temper, and cut size were the filters, and every figure below comes from a page opened for this guide.
This guide takes a different angle from a general building sheet roundup. Instead of structural panels, it ranks sheet by the three cooker jobs: reflecting, lining, and covering. A sheet that wins for a curved solar reflector can be the wrong sheet for a flat liner that gets scrubbed daily.
Quote based supply is normal in this category, and several listings here are mill or stockholder pages rather than boxed products. That is stated openly in each section, because sheet is bought by alloy, temper, thickness, and cut, and the page that states those four lines is the product record that matters.
Six sheets ranked for reflector, liner and cover work
The six listings below move from the most reflective to the most plain. Mirror and reflective sheets come first for cooker reflectors and solar panels, the coated circle follows for covers, and the mill finish sheet closes the list for liners and trays where reflectivity does not matter at all.
Lighting Sheet Reflective Surface One Side LRS-032-485-965
This stockholder listing is the ready sized reflector sheet: 0.032 inches thick, which the page also states as 0.8128 mm, in a sheet size of 48.5 x 96.5. Total reflectivity is stated at 83 percent, image clarity at 93 percent, and diffuseness at less then 0.03 percent on the page spec table.
Weight is stated two ways: 0.456 lbs per square foot and 14.83 lbs per sheet, which helps when a reflector panel must hang or fold without a heavy frame. The reflective face is on one side, so the dull back can face the support while the bright face does the work inside a panel or box cooker.
The limit is format. One thickness and one sheet size are listed for this item number, so a project needing a thicker liner or a small offcut starts from a full sheet. The page lists the item for quotation, and alloy and temper are not stated in the spec table for this reflective grade.
- Pros: stated reflectivity and clarity, full sheet size, light per square foot
- Cons: single size listed, alloy not stated on the page, quote based supply
- Buy if: you need one large flat reflector panel for a panel or box cooker
- Skip if: your part is a small liner that needs a stated food side alloy
1050/1060/1070 Aluminum Mirror Sheet Coil
The maker page for this mirror coil lists thickness from 0.1 to 3.5 mm, width from 10 to 1700 mm, and length from 500 to 16000 mm, in alloys 1050, 1060, and 1070. Reflectivity options are stated at 80 percent, 86 percent, and 95 percent, with tempers O, H12, H14, H16, H18, and H24 listed.
Applications on the page include solar reflective equipment, which is the cooker link: curved and panel solar cookers live or die by how much light their reflector returns to the pot. Coil format suits curved panels because thin gauges in the soft tempers listed can be formed around a frame.
The same page lists a higher purity mirror coil range at 0.1 to 1.0 mm in temper O for lighting and solar work. The trade across this listing is choice itself: with three reflectivity grades and six tempers, the buyer must specify the combination rather than picking a single stocked sheet off a shelf.
- Pros: widest thickness range here, 95 percent reflectivity grade listed, coil suits curves
- Cons: specification must be built at order, coil needs cutting and edging
- Buy if: you are forming a curved solar cooker reflector to a set radius
- Skip if: you want one flat sheet delivered ready to fit
Mirror Aluminum Circle 1100, 1060
This is the cover specialist. The maker page lists mirror aluminum circles in alloys 1100 and 1060, tempers H0, H18, and H24, thickness from 0.3 to 1.0 mm, and a maximum diameter of 1000 mm, with a stated reflectivity of 86 percent for the gold and silver mirror sheet used.
The application line is unusually direct for this category: the page states the circles are widely used in cooker covers of kitchenware, plus household appliance panels. A round blank in a stated diameter removes the cutting step for lids, splash covers, and round reflector discs that sit over a pot.
Treatment is listed as color coated mirror, with coating on one side or both sides. The stated thickness tolerance is plus or minus 0.2 mm, which is loose beside the sheet tolerances elsewhere in this guide, so a cover that must seal tightly against a rim needs its fit confirmed at order.
- Pros: cooker covers named on the page, round blank saves cutting, coating side choice
- Cons: 1000 mm diameter cap, loose stated tolerance, thin gauges only
- Buy if: you make or replace round cooker covers and lids
- Skip if: your part is rectangular or needs plate thickness
Mirror Finish Aluminum Sheet/Coil
This supplier lists mirror finish sheet in alloys 1050, 1060, and 1070, tempers O, H14, H24, H16, and H26, thickness from 0.25 to 2.0 mm, width from 20 to 1500 mm, and length from 1000 mm or coil. Reflectance is stated at 86 percent, and the standard width is listed as 1250 mm.
Applications named on the page include lighting reflector and solar energy collector, both of which map onto cooker reflector panels and solar cooker wings. The supplier states it can cut and split coil into customized sizes, with vertical split and horizontal cut both listed as available on the page.
Standard coil size is stated as 0.28 mm to 0.75 mm by 1250 mm. Colors listed are silver, titanium, red, and black, which matters for covers and outer panels rather than for working reflectors. The page also states the sheet can be molded and bent, a useful line for folded reflector edges.
- Pros: cut and split service stated, 86 percent reflectance, bendable per the page
- Cons: thin range, decorative colors distract from working grades
- Buy if: you need mirror panels cut to a project size from coil
- Skip if: your liner needs thickness above 2.0 mm
Anodized Aluminium Mirror Sheet/Coil
The anodized mirror listing is the thick end of this guide. Its spec table lists A1050, A1060, A1070, and A1100 rows at 1.0 to 10 mm thick, 20 to 2200 mm wide, and 20 to 8000 mm long, with further rows for 3003 class, 5052 class, 6061 class, and 8011 alloys at the same thickness range.
The page describes the sheet as polished, anodized, and mill finished, and lists uses including lighting reflectors, solar collectors, and household appliance panels. An anodized surface over a mirror base suits cooker outer panels and liners that need a harder face than a plain polished sheet offers.
Temper choice is wide, from H12 through H26 in the pure rows and T4 and T6 in the 6061 class row. That breadth is also the limit: this is a mill range page, so the exact alloy, temper, and finish combination for a cooker panel is set by quotation rather than chosen from stocked single items.
- Pros: thickest range here, anodized face, appliance panels named, many alloys
- Cons: quote based mill range, heavy at plate gauges, overbuilt for simple reflectors
- Buy if: a cooker outer panel or hard wearing liner needs real thickness
- Skip if: the part is a light reflector that must flex or fold
1100-H14 Aluminum Sheet 0.040 inches
The plain sheet in this guide is a stockholder item: 1100-H14, mill finish, 0.040 inches thick, stated as 1.016 mm, in a 48 x 144 size weighing 27.10 lbs per sheet. The page lists ASTM B209 and AMS 4003 among its specifications, with density stated at 0.098 lbs per cubic inch and specific gravity at 2.71.
Mechanical figures are stated in full: tensile strength 18 KSI, yield strength 17 KSI, elongation 9 percent in 2 inches, and Brinell hardness 32. The page describes 1100 as commercially pure, soft and ductile with excellent workability, and names the chemical and food processing industries among its wide uses.
Applications listed are sheet metal work, spun hollowware, and fin stock, which map onto liners, trays, and spun cooker parts rather than reflectors. There is no reflective finish to protect, so a liner cut from this sheet can be scrubbed and re-formed without worrying about a mirror face, unlike the sheets above it.
- Pros: full stated strength figures, food processing use named, large sheet size
- Cons: no reflectivity, 48 x 144 sheet is awkward to move, mill finish marks easily
- Buy if: you need a washable liner, tray, or spun part in a stated alloy
- Skip if: the part must reflect light or heat back into a cooker
Buying guide
Sheet buying for cookers goes wrong when one sheet is asked to do all three jobs. Reflectors want surface figures, liners want a stated alloy and washable finish, and covers want flatness and the right blank shape. Read the listing for the job your part actually does each time it cooks.
Match aluminum sheet for cookers to the job
Start by naming the part. A reflector panel is judged on reflectivity and clarity, a liner on alloy, temper, and how its surface takes washing, and a cover on diameter, flatness, and edge finish. The listings above each lead with different figures because the parts themselves are judged differently.
Then check that the listing actually names your use. Pages here name solar reflective equipment, solar collectors, cooker covers, appliance panels, and food processing use. A sheet whose page names your job carries more weight than a general sheet with a longer alloy list and no stated end use at all.
Reflectivity figures need a second line
A reflectivity figure alone does not describe a reflector. The strongest listings pair it with clarity or diffuseness, thickness, and the temper that decides whether the sheet holds a curve. The fixed reflector sheet above states 83 percent reflectivity with 93 percent image clarity in the same table.
Higher grades exist on the mirror coil page, where 95 percent is listed beside 80 percent and 86 percent options. Treat grade as a specification to order, not a promise across a range: the delivered sheet is the grade named in the order, and the page lists the grades as alternatives, not as one sheet.
Thickness is a forming decision
Thin mirror coil at 0.1 mm to 1.0 mm forms around frames and curves, mid gauges around 0.032 inches hold a flat panel, and plate gauges in the anodized range hold an edge and a fastener. Choosing thickness by the bend in the part, rather than by habit, avoids both floppy reflectors and stiff liners.
Weight follows thickness, and two listings state it directly: 0.456 lbs per square foot for the reflector sheet and 27.10 lbs for the full 48 x 144 liner sheet. For a cooker that moves, such as a panel cooker carried to a site, that per foot figure decides whether the design stays portable.
How aluminum sheet for cookers differs by finish
Finish decides care. Mirror faces return the most light and show every scratch, anodized mirror adds a harder oxide face over the reflective base, color coated circles trade some working surface for a finished look, and mill finish gives up reflectivity entirely in exchange for easy scrubbing and re-forming.
Protective film and coating sides are worth one line of attention at order. Pages here list coating on one side or both sides, and a reflective face on one side only for the fixed sheet. State which side works in your cooker, because a reflector fitted bright side back is a liner with extra steps.
Alloy and temper in plain terms
The pure grades dominate these listings: 1050, 1060, 1070, and 1100 appear across the mirror, circle, and mill finish pages. The stockholder page describes 1100 as commercially pure, soft and ductile, work hardening more slowly than other alloys, and the most weldable of aluminum alloys by any method.
Temper letters set how that alloy behaves on the bench. Soft O temper appears on the mirror coil for forming, H14 appears on the liner sheet for a balance of stiffness and workability, and harder tempers appear on the anodized rows. Match the temper to the tightest bend in the part, not to the part name.
Cut size and format decide waste
Format runs from coil at up to 16000 mm long, through cut and split services, to one fixed 48.5 x 96.5 sheet and pre-cut circles at up to 1000 mm diameter. A project with many small panels wastes less from coil or a cut service, while a single large reflector wastes less from the fixed full sheet.
Circles deserve a special note for cooker work. Lids and covers are round, and a stated diameter blank removes the hardest cut in thin sheet. Where a cover is the part, the circle listing in this guide is the only one that starts from the finished shape rather than from a rectangle.
FAQ
Questions about sheet for cookers usually turn on reflectivity, gauge, and whether a decorative finish can do a working job. The answers below use only figures stated on the supplier and maker pages opened for the six listings in this guide, and general workshop knowledge beyond them.
What reflectivity should a cooker reflector have?
The listings here state 83 percent for the fixed reflector sheet, 86 percent for the mirror finish sheet and the mirror circles, and up to 95 percent for the highest mirror coil grade. Any of those figures describes a working reflector surface, with the higher grades listed as specific order options.
Clarity matters beside the headline figure. The fixed sheet pairs its 83 percent with 93 percent image clarity and very low diffuseness, which describes a surface that returns a directed image rather than scattering it. For a focused cooker, that second line can matter as much as the percentage itself.
Can mirror sheet be used as a cooker liner?
It can, but the finish becomes the maintenance problem. A mirror liner shows scratches and loses its reflective face where it is scrubbed, while the mill finish 1100-H14 sheet in this guide is listed for sheet metal work and food processing use with no delicate face to protect during washing.
The anodized mirror sheet sits between the two: its page describes a polished and anodized surface and lists household appliance panels among its uses. For a liner that must also present a bright face, that harder surface is the more practical of the reflective options listed here.
What thickness suits a solar cooker reflector?
The mirror coil page lists 0.1 to 3.5 mm across its range, and the thin end of that range forms around curved frames, while the fixed reflector sheet at 0.032 inches holds a flat panel at 0.456 lbs per square foot. Curved designs read the coil listings; flat panel designs read the fixed sheet first.
Support decides the final gauge. A reflector bonded or clipped across a full frame can run thinner than a free standing panel of the same size. The listings state thickness and weight, not frame design, so the frame choice stays a workshop decision made beside the sheet figures, not from them.
Why buy a circle instead of cutting sheet?
Because cooker covers are round and thin sheet is awkward to cut into a true circle by hand. The circle listing states alloys 1100 and 1060, thickness from 0.3 to 1.0 mm, and diameters up to 1000 mm, with the page naming cooker covers of kitchenware as a direct use for the product.
The stated tolerance is the counterpoint: plus or minus 0.2 mm on thickness, per the maker page. A decorative cover absorbs that easily, while a cover that must seal on a machined rim may not. In that case a flat sheet cut and finished locally gives control that a stock blank cannot promise.
Does alloy choice matter for a simple liner?
Yes, mainly for forming and joining. The stockholder page describes 1100 as soft and ductile with excellent workability, states that it work hardens more slowly than other alloys, and calls it the most weldable of aluminum alloys by any method, all of which suit a folded, joined liner.
Its stated figures back the choice: 18 KSI tensile strength, 17 KSI yield strength, and 9 percent elongation for the 0.040 inch H14 sheet. A liner does not need high strength, but it does need to fold without cracking at the corners, and elongation is the figure that speaks to that job.
Conclusion
For reflectors, start with the mirror coil and the fixed reflective sheet. For covers, the mirror circle is the only listing built around the finished shape. For liners, the mill finish 1100-H14 sheet carries the clearest stated figures. Name the job first, and the sheet choice follows it every time.