Updated Nov 17, 2026· 16 min read

Key takeaways

  • Compare water temp for pour over coffee makers across six temperature control kettles, with stated ranges, hold times and maker suggested brew temperatures.

Pour over coffee lives or dies on water temperature, yet most kettles only boil and leave you guessing. The water temp for pour over coffee makers below is answered with numbers the makers themselves print: six temperature control kettles whose pages state a range, an increment, a hold time or a suggested brew temperature.

Quick verdict

The suggested brewing band that repeats across maker pages sits in the low to mid 90s in Celsius. One maker page cites the SCA recommendation of 92 to 96 degrees C for filter coffee, Timemore prints 90 to 92 degrees C for medium roast beans, and the OXO guide lists 200 degrees F, or 93 degrees C, for coffee.

The Brewista Artisan and the Timemore Fish Smart state the widest Celsius ranges, 40 to 100 degrees C, while Bonavita states the widest Fahrenheit span, 140 to 212 degrees F in one degree steps. The Hario is the outlier: it stops at 96 degrees C, under a full boil.

Product Stated range Adjustment Hold time Main limit
Fellow Stagg EKG Electric Kettle Range not stated on the maker page To the degree, in 0.5 degrees F increments Hold described, no time stated No numeric range printed on the page
Bonavita Digital Variable Temperature Gooseneck Kettle, 1L 140 to 212 degrees F One degree increments Up to 60 minutes Highest lowest setting here, 140 degrees F
Brewista Artisan Variable Temperature Gooseneck Kettle 40 to 100 degrees C 1 degree C increments Up to 60 minutes Figures stated in Celsius on the page
Timemore Fish Smart Electric Pour Over Kettle 40 to 100 degrees C Any set point, controller accuracy 1 degree C More than 1 hour Stated data error of plus or minus 3 degrees C
OXO Brew Adjustable Temperature Pour-Over Kettle 104 to 212 degrees F (40 to 100 degrees C) Set by dial on the base 30 minutes Count-up timer caps at 10 minutes
Hario V60 Adjustable Temperature Kettle EVT-80-HSV-E 50 to 96 degrees C Adjustable, steps not stated on the page 15 minutes No full boil, top setting is 96 degrees C

How we selected

Selection started with the question itself. A kettle only qualified if its opened page states temperature figures or temperature control specs in writing: a settable range, an adjustment increment, a hold time, an accuracy figure or a suggested brewing temperature. Plain boiling kettles with no stated control were left out.

The maker and listing pages for each pick were read for exactly those figures, plus capacity, power, display and timer details. Every temperature in this article is copied from an opened page and attributed to its maker. Where a page does not state a figure, the entry says so plainly, as with the Fellow range, rather than borrowing the number from elsewhere.

Six kettles that control water temp for pour over coffee makers

The six kettles below split by how they present control. Three state full ranges in Celsius, two state Fahrenheit ranges, and one states increments without a printed range. Read the stated figures for each, because the differences, a 15 minute hold against a 60 minute hold, decide daily use more than the spout does.

Fellow Stagg EKG Electric Kettle

This Fellow kettle suits pour over brewers who set temperature by fine steps. The maker page, which now presents the Stagg EKG Pro and Pro Studio editions, lists to-the-degree temperature control in 0.5 degrees F increments in its comparison table, with a capacity of 0.9 litres, listed as 30 oz, for the pour-over models.

Why it fits: half degree steps are the finest adjustment stated in this roundup, and the maker describes a precision pour spout, plus scheduling that sets the kettle to heat in advance. The product description states 1200 watts for a quick heat time and variable temperature control.

The honest limit sits in the table above: the maker page read here does not print a numeric temperature range for this kettle. It states the control, the increments and the hold behavior in words, so a shopper who needs the written range should weigh the five kettles below, which state one.

Other stated details are about workflow: a high-resolution color display shows temperature and heating progress. The maker does not state a hold time in minutes on the page, so that figure cannot be compared directly with the timed holds below.

  • Pros: Finest stated steps, 0.5 degrees F increments
  • Pros: Scheduling heats water in advance
  • Pros: 1200 watts stated for quick heat time
  • Cons: No numeric range printed on the maker page
  • Cons: No hold time in minutes stated
  • Cons: Page covers Pro editions, base model details differ

Buy if you adjust temperature in small steps and want the kettle ready on a schedule. Skip if you want the temperature range and hold time printed before you buy, since this page leaves both in words.

Bonavita Digital Variable Temperature Gooseneck Kettle, 1L

This Bonavita suits brewers who think in Fahrenheit and want the full span stated. The listing states it is adjustable to a precise brewing or steeping temperature in one degree increments, from 140 to 212 degrees F, with a real-time temperature display and a 1 litre capacity, under model number BV382510V.

Why it fits: the stated range reaches a full 212 degrees F boil and steps down one degree at a time, so any pour over set point in the 190s and 200s is directly settable. The listing also states heat and hold at the desired temperature for up to 60 minutes, matching the longest timed holds here.

Supporting details are stated too: a count-up timer for tracking the brew, a gooseneck spout for precise pour control, dimensions of 11 inches long, 7 inches wide and 9 and a quarter inches high. The specifications block lists 120 volts, 60 hertz and 1000 watts.

Limits are about the floor of the range. The lowest setting, 140 degrees F, is the highest minimum in this roundup, which matters only for drinks far cooler than coffee. The listing states temperatures in Fahrenheit only, so Celsius-first brewers should look at the Brewista and Timemore pages instead.

  • Pros: Full stated range, 140 to 212 degrees F
  • Pros: One degree increments with a real-time display
  • Pros: Holds the set temperature up to 60 minutes
  • Cons: Highest lowest setting here at 140 degrees F
  • Cons: Range stated in Fahrenheit only on the listing
  • Cons: No accuracy figure stated

Buy if you brew by Fahrenheit numbers and want range, hold and timer all stated on one page. Skip if you work in Celsius, or if you want an accuracy figure from the maker, which this listing does not print.

Brewista Artisan Variable Temperature Gooseneck Kettle

This Brewista suits brewers who want the brewing guidance printed beside the hardware. The listing states a temperature range of 40 to 100 degrees C adjustable in 1 degree C increments, a keep-warm function of up to 60 minutes, an integrated pour-over timer, a 1000 watt element and a 1 litre capacity.

Why it fits: the same page prints the guidance this keyword asks for. It cites the SCA recommendation of brewing filter coffee at 92 to 96 degrees C, and gives 93 degrees C as its worked example for a V60, so the suggested band and the tool for holding it share one page.

Two memory details help daily use: the kettle remembers the last set temperature, so a preferred setting is waiting at switch on, and a fast-boil setting heats to 100 degrees C directly when a recipe calls for boiling water first.

Limits are about units and extras. The page states everything in Celsius, so Fahrenheit brewers convert. The page does not state an accuracy tolerance in degrees, unlike the Timemore below, and it does not state scheduling, so water is heated when you start it, not before.

  • Pros: Full 40 to 100 degrees C range in 1 degree C steps
  • Pros: Page cites the SCA band of 92 to 96 degrees C
  • Pros: Remembers the last set temperature
  • Cons: Figures stated in Celsius only on the page
  • Cons: No accuracy tolerance stated
  • Cons: No scheduling feature stated

Buy if you want the kettle page itself to state both the control range and a cited brewing band. Skip if you need a stated accuracy figure, or if your recipes are all written in Fahrenheit and you dislike converting.

Timemore Fish Smart Electric Pour Over Kettle

This Timemore suits brewers who want the most temperature detail on one page. The listing states the temperature can be set to any point within 40 to 100 degrees C, with a built-in STRIX controller whose accuracy reaches 1 degree C, a stated data error of plus or minus 3 degrees C, and a hold range of 40 to 100 degrees C.

Why it fits: the maker prints roast based settings for pour over on the same page: 90 to 92 degrees C for medium roasted beans, 92 to 96 degrees C for lightly roasted beans and 85 to 90 degrees C for deep-roasted beans. No other page here splits the suggestion by roast, which is how most brewers choose a number.

Sizes and speed are stated too. The home edition holds 600 ml at 1000 watts, with a maximum water level around 560 ml, and the commercial edition holds 800 ml at 1500 watts. The maker states the 600 ml size boils water to 90 degrees C in 2 minutes 40 seconds, and keep-warm runs for more than 1 hour, the longest hold stated here.

Limits sit in the maker’s own fine print. The stated data error of plus or minus 3 degrees C is wider than the controller accuracy figure beside it, and the maker notes some areas may not reach 100 degrees C because of air pressure.

  • Pros: Roast based temperature suggestions printed by the maker
  • Pros: Accuracy figure stated, 1 degree C controller
  • Pros: Longest stated hold, more than 1 hour
  • Cons: Stated data error of plus or minus 3 degrees C
  • Cons: Small 600 ml home size, max level around 560 ml
  • Cons: Touch slider controls only, no dial

Buy if you change temperature by roast and want the maker’s own set points and tolerances in writing. Skip if you brew large pots back to back, since even the larger edition tops out at 800 ml.

OXO Brew Adjustable Temperature Pour-Over Kettle

This OXO suits brewers who want a printed temperature guide on the base and a wide Fahrenheit range. The maker manual states the dial sets a desired water temperature between 104 degrees F (40 degrees C) and 212 degrees F (100 degrees C), and that the water is then held for 30 minutes before the kettle switches off.

Why it fits: the manual prints a suggested temperature chart that lists Black Tea and Coffee at 200 degrees F, or 93 degrees C, and its timer guidance states that coffee grounds should be in contact with water at 195 to 205 degrees F for 3 to 4 minutes for the pour over process. Those are maker printed set points, not roundup opinion.

Supporting figures are stated in the same manual: an integrated count-up timer with a maximum of 10 minutes, 1500 watts of heating power, and a descaling interval of every 60 uses.

Limits are about the hold and the timer. Thirty minutes is half the hold of the Bonavita and Brewista, and the 10 minute timer cap is the shortest stated here, though a pour over brew sits well inside it. The manual states the range in both units but the adjustment steps in neither, so step size cannot be compared from the page.

  • Pros: Wide stated range in both Fahrenheit and Celsius
  • Pros: Printed coffee figure of 200 degrees F, 93 degrees C
  • Pros: Contact band of 195 to 205 degrees F stated
  • Cons: Hold time of 30 minutes is mid pack
  • Cons: Timer caps at 10 minutes
  • Cons: Adjustment step size not stated

Buy if you want the suggested coffee temperature printed by the maker and a range that starts low for other drinks. Skip if you brew across a long morning and need an hour of hold, or if fine step size is your deciding figure.

Hario V60 Adjustable Temperature Kettle EVT-80-HSV-E

This Hario suits brewers whose recipes never call for boiling water. The listing states a temperature range of 50 to 96 degrees C, adjustable, with the set temperature held for 15 minutes, in a stainless steel body with a gooseneck spout, under model EVT-80-HSV-E.

Why it fits: the ceiling is the feature. A kettle that tops out at 96 degrees C cannot overshoot into a rolling boil, and its range covers the full band the other makers suggest for pour over, from the mid 80s to the mid 90s.

Supporting details are stated plainly: heating and keep-warm settings are color-coded, the kettle switches itself off after 10 minutes without use, and boil-dry protection stops it heating with no water in it. The listing describes the hold as keeping the last pour of a brew at the same heat as the first.

Limits follow from the same design. Fifteen minutes is the shortest hold, so a slow, staged brew across several cups can outlast it, and any recipe that starts from a full boil, including rinse and preheat steps, is out of reach. The page does not state the adjustment steps or the capacity in the text read here.

  • Pros: Ceiling of 96 degrees C rules out a rolling boil
  • Pros: Range covers the suggested pour over band fully
  • Pros: Color-coded heating and keep-warm settings
  • Cons: Shortest hold here at 15 minutes
  • Cons: Cannot reach a full 100 degrees C boil
  • Cons: Adjustment steps and capacity not stated on the page

Buy if your pour over routine lives between 85 and 96 degrees C and you value a kettle that cannot overshoot. Skip if you need boiling water from the same kettle, or a hold that lasts through a long, multi cup session.

Buying guide

The right kettle is the one whose stated figures match the temperatures you actually brew at, so start from the makers’ printed suggestions, then compare ranges, holds and displays. The points below keep every number tied to the page that printed it.

The numbers makers print for water temp for pour over coffee makers

Three maker pages print a figure rather than leaving you to find one. The Brewista page cites the SCA recommendation of 92 to 96 degrees C for filter coffee, Timemore prints 90 to 92 degrees C for medium roast, 92 to 96 for light roast and 85 to 90 for deep roast, and OXO lists coffee at 200 degrees F, 93 degrees C.

Read together, the suggestions agree more than they differ: a working band from about 85 to 96 degrees C, chosen by roast, with the low 90s as the middle. OXO adds a contact view, stating grounds should sit in water at 195 to 205 degrees F for 3 to 4 minutes, which is the same band in Fahrenheit across the brew.

Range and increments decide how exact you can be

Ranges here run from the Hario span of 50 to 96 degrees C to full boiling spans of 40 to 100 degrees C and 104 or 140 to 212 degrees F. A wider range matters for tea and other drinks; for pour over alone, every kettle here covers the suggested band, so the floor and ceiling are about your other uses.

Increments decide how closely you can land on a recipe figure. Fellow states the finest steps at 0.5 degrees F, Bonavita and Brewista state one degree steps, and Timemore states a 1 degree C controller accuracy with a wider stated data error. Where a page states no step size, as with OXO and Hario, treat exactness as unproven rather than poor.

Hold time and the second pour

Hold time is where the six separate most clearly: 15 minutes from Hario, 30 minutes from OXO, up to 60 minutes from Bonavita and Brewista, more than 1 hour from Timemore, and a hold described without minutes from Fellow, which instead offers scheduling to heat in advance.

Match the hold to your routine. A single brewer making one V60 needs only the shortest hold, because the kettle reheats quickly between brews. A household pouring four cups across a slow breakfast, or a brewer who preheats, blooms and pours in stages, gets real value from the 60 minute holds.

Displays, timers and controls

Feedback during the brew comes from displays and timers. Bonavita states a real-time temperature display, Timemore states a dual display of actual and set temperature, Brewista builds in a pour-over timer and remembers the last set temperature, and OXO and Bonavita both state count-up timers.

Controls differ in kind: a dial on the OXO and Fellow bases, a touch slider on the Timemore. None of that changes the water, but it changes how often you hit the number you meant to. If you brew half awake, the memory function and the printed guide on the base do more work than any step size.

Capacity and power for your brew size

Capacities are modest by design: 0.9 litres for the Fellow pour-over models, 1 litre for the Bonavita and the Brewista, and 600 or 800 ml for the two Timemore editions. A gooseneck kettle is a pouring tool, not a storage tank, so size it to your largest single brew rather than to a day of coffee.

Power figures run from 1000 watts on the Bonavita specifications, the Brewista and the small Timemore, through 1200 watts on the Fellow, to 1500 watts on the OXO and the large Timemore. The only stated heat-up time is the Timemore figure: 600 ml to 90 degrees C in 2 minutes 40 seconds.

FAQ

These answers cover the questions pour over brewers ask most about temperature: the suggested number, kettles that stop under boiling, holding between pours, units and upkeep. Each answer rests on figures the makers state on the pages used for this roundup.

What water temp for pour over coffee makers do the makers suggest?

The printed suggestions cluster in the low to mid 90s in Celsius. The Brewista page cites the SCA band of 92 to 96 degrees C for filter coffee, Timemore prints 90 to 92 degrees C for medium roast beans and up to 92 to 96 for light roasts, and the OXO guide lists coffee at 200 degrees F, or 93 degrees C.

Roast moves the figure inside that cluster: Timemore drops to 85 to 90 degrees C for deep-roasted beans. So the honest answer is a band, not a single degree, and the band’s edges come from the makers’ pages rather than from habit.

Why does one kettle here stop below boiling?

The Hario is built that way: its stated range ends at 96 degrees C, which covers the suggested pour over band while ruling out a rolling boil. Altitude can impose a similar ceiling on any kettle, and two makers say so on their pages in their own words.

The OXO manual notes that boiling point depends on altitude and that at higher elevations water boils at lower temperatures, giving a case where the kettle stops at 204 degrees F. The Timemore page likewise notes that some areas may not be heated to 100 degrees C because of air pressure.

Does a temperature control kettle hold its heat between pours?

Yes, and the stated times differ enough to matter: 15 minutes for the Hario, 30 minutes for the OXO, up to 60 minutes for the Bonavita and the Brewista, and more than 1 hour for the Timemore in its hold mode. The Fellow page describes holding the set temperature without stating minutes.

For a normal pour over, even the shortest hold covers the brew itself, since the OXO manual puts ground contact at 3 to 4 minutes. Holds earn their keep between brews, when a second or third cup is poured across a morning rather than in one session.

Does it matter if the kettle works in Fahrenheit or Celsius?

Only for your own notes. The ranges translate directly: the OXO range of 104 to 212 degrees F is printed by the maker as 40 to 100 degrees C, and its coffee suggestion of 200 degrees F is printed as 93 degrees C. The water does not care which scale set it.

Practically, match the kettle to the scale your recipes use. Bonavita states its range in Fahrenheit, Brewista and Timemore state theirs in Celsius, and the OXO manual describes switching the display between the two units, which is the most flexible answer on paper.

How do I keep a temperature control kettle accurate over time?

Scale is the stated enemy. The OXO manual instructs descaling every 60 uses and notes that regular descaling lets the kettle boil faster with less energy, and mineral buildup on a heating element and sensor is the common reason a kettle drifts from its set point over months of use.

Timemore is the one maker here that prints a tolerance to check against: a controller accuracy of 1 degree C beside a stated data error of plus or minus 3 degrees C. If your kettle has no stated tolerance, a thermometer reading against the display is the way to spot drift.

Conclusion

The makers’ printed answer is a band, roughly 85 to 96 degrees C by roast, with the low 90s at its center. For control, the Brewista and Timemore state the fullest figures, the Bonavita leads in Fahrenheit, and the Hario suits brewers who never boil. Pick the kettle whose stated range, hold and display match how you already brew.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.