Key takeaways
- Compare five compact mixers for PC speaker desks, from analog Mackie and Behringer boards to USB streaming mixers from Yamaha and Maono, with headphone outs.
Quick verdict
Short on time? The Yamaha AG03MK2 is the neatest single-box answer for a streaming or calls-heavy desk, the Behringer Xenyx 802S adds a second mic preamp and full analog channel strips, and the two Mackie Mix boards cover purely analog desks. The Maono Maonocaster Lite suits streamers who want sound pads and voice effects built in.
| Product | Computer connection | Mic inputs | Speaker outputs | Headphone output | Size |
|---|---|---|---|---|---|
| Yamaha AG03MK2 | USB-C, 24-bit/192 kHz | 1 combo (+48V) | Monitor out pair | Yes, plus headset | 126 x 63 x 201 mm |
| Behringer Xenyx 802S | USB Type-B, 48 kHz/16-bit | 2 XLR | Main and monitor TRS | Yes | 189 x 220 mm |
| Mackie Mix8 | Analog only (RCA/TRS) | 2 XLR | Main and control room TRS | Yes | 7.8 x 9.6 in |
| Mackie Mix5 | Analog only (RCA/TRS) | 1 XLR | Master and tape RCA | Yes | 140 x 196 mm |
| Maono Maonocaster Lite AU-AM200 | USB-C, 48 kHz/16-bit | 2 x 3.5 mm | 3.5 mm output jack | Yes, plus headset | 24 x 14 x 4.2 cm |
How we selected these mixers for pc speaker desks
Every mixer here was checked against the same desk brief: it must accept the computer as a source, by USB or by an analog cable, add at least one microphone or a second source, feed powered desktop speakers from a proper output pair, and give headphones their own jack and level control so late-night listening does not mean unplugging the speakers.
Products were verified from manufacturer pages, manuals and full specification listings opened during research, and only models still listed as current were included. Pure line mixers with no microphone input and no dedicated headphone output were left out, as were larger live consoles whose channel counts and footprints belong on a stage rather than beside a monitor. Where a listing showed conflicting stock information, the model was kept only if the maker still lists it as current, and the conflict is flagged for the owner.
Output level mattered as well. Powered desktop speakers expect a line-level feed with enough headroom to reach full volume without the mixer straining, so boards whose main outputs reach around +21 dBu, like the Behringer and the two Mackies, suit speakers with modest input sensitivity. Monitoring mattered just as much: a headphone jack that simply mirrors the speaker feed at the same level forces compromises, so each pick here gives headphones a level control of their own.
The five mixers for pc speaker setups in detail
The five picks split into two families. The USB models (Yamaha, Behringer and Maono) become the computer’s sound device, so playback and microphone travel over one cable. The analog Mackie boards sit between the computer’s output or interface and the speakers, suiting desks that already have an interface or prefer physical wiring.
Yamaha AG03MK2
The AG03MK2 is a 3-channel live streaming mixer with a USB audio interface, built around one microphone channel with a 60 mm fader. For a PC speaker desk it acts as the hub: the computer connects over USB-C, powered speakers hang off the monitor outputs, and headphones plug in beside them.
Channel 1 takes a microphone or line source on a combo connector with +48 V phantom power and a 26 dB pad, and a headset microphone can be used instead of the main input, though not at the same time. Channel 2 is a stereo line or mono guitar input with a Hi-Z switch. A 4-pole mini jack adds a smartphone as a source or call guest. Outputs are a stereo MONITOR OUT pair, two PHONES connections (headphones and headset, not usable simultaneously) and an AUX OUT.
The USB side runs 2-in/2-out at up to 24-bit/192 kHz and is USB Audio Class 2.0 compliant. DSP on the mic channel provides compressor, EQ and reverb, with an amp simulator on the guitar channel, all adjusted through the AG Controller app. LOOPBACK folds computer playback into the outgoing stream, STREAMING OUT selects between dry channels, the input mix or loopback, and a MIX MINUS MIC option keeps your own voice out of a call feed. Measured figures include an equivalent input noise of -128 dBu and THD+N of 0.01 percent at +4 dBu. The unit is bus powered at DC 5 V, 900 mA, measures 126 x 63 x 201 mm, weighs 0.8 kg, and bundles Cubase AI, WaveLab Cast and Cubasis LE.
- Pros: one USB-C cable carries playback and microphone; monitor and headphone outputs sit side by side; loopback and mix-minus are built for calls and streams; very small footprint
- Cons: only one microphone input; DSP settings live in an app rather than on knobs; headphone and headset outputs cannot be used at the same time
Buy if: your desk centers on calls, streaming or voice recording and you want the computer, mic, speakers and headphones on one compact box. Skip if: you need two microphones, or you want every control to be a physical knob with no app involved.
Behringer Xenyx 802S
The Xenyx 802S is an 8-channel analog mixer that adds a USB streaming interface, which makes it the most flexible board here for a desk that mixes computer audio with real-world sources. Two XENYX mic preamps with 48 V phantom power cover a main microphone and a second mic or instrument.
The channel layout gives two mono channels and two stereo channels with 3-band EQ (low 80 Hz, mid 2.5 kHz, high 12 kHz, +/-15 dB), plus an additional stereo channel. A stereo RCA streaming input accepts a phone or media player, and the USB connection (Type-B, 48 kHz/16-bit, UAC2 class compliant) carries stereo audio both ways: it routes to channels 7/8 when nothing else is plugged in, and a Stream to Mix control assigns USB or RCA playback to the main mix. Mic gain runs from +10 to +60 dB and THD+N is quoted at 0.005 percent.
Outputs suit a speaker desk well: main, monitor and FX send connections on 1/4-inch TRS with a maximum output of +21 dBu, a 1/4-inch phones output for headphones, and a stereo RCA stream out for sending the mix elsewhere. The board measures 47 x 189 x 220 mm, weighs 1.6 kg and runs from an 18 V DC adapter at 12 W.
- Pros: two mic preamps plus USB streaming in one board; proper 3-band EQ on the main channels; separate main and monitor outputs for speakers; stream out RCA for a second destination
- Cons: USB audio is 16-bit/48 kHz where the Yamaha runs higher rates; the external adapter adds a brick to the desk; no loopback routing for call feeds
Buy if: you want a small analog mixer first and a computer connection second, with two microphones and tone control on the desk. Skip if: you want a single-cable USB hub with call routing, where the Yamaha fits better.
Mackie Mix8
The Mix8 is the analog anchor of this list: an 8-channel compact mixer with no computer interface at all. The computer joins by cable, either into the dedicated stereo RCA tape inputs or into a stereo channel, and the board’s control room outputs make it the best pick here for switching between speakers and headphones.
Two Mackie mic preamps with phantom power take microphones, backed by six TRS line inputs and the stereo RCA tape pair, which also provides tape outputs for recording the mix to another device. Every channel carries 3-band EQ. The main outputs are a TRS pair, and a separate control room output pair on TRS has its own level control, so powered speakers can sit on the control room outs while the main outs stay free, or the other way round. One post-fader aux send with a TRS return adds an external effects loop.
The headphone output is a 1/4-inch jack with its own volume control, independent of the speaker level, which is the detail that makes analog boards pleasant on a desk. The enclosure is rugged metal, and the mixer measures 2.1 in high x 7.8 in wide x 9.6 in deep and weighs 2.5 lb.
- Pros: control room outputs with independent level are ideal for powered speakers; headphone volume is separate from speaker volume; two mic preamps and tape in/out cover most desk sources; metal enclosure
- Cons: no USB, so the computer needs its own output or interface; no recording path back to the computer without extra hardware; the largest footprint of the analog picks here except the Behringer
Buy if: your computer already has a good audio output or interface and you want physical control of speakers, headphones and two microphones. Skip if: you want the mixer itself to be the computer’s sound device over USB.
Mackie Mix5
The Mix5 trims the same idea down to the smallest useful form: 5 channels, one mic preamp, and just enough routing for a computer, one microphone and a second stereo source. It is the pick for desks where the available space matters far more than the channel count.
Channel 1 combines an XLR microphone input (maximum level +19 dBu, 2 k input impedance) with a line input, and carries the mixer’s 2-band EQ, shelving at +/-15 dB at 12 kHz and 80 Hz, plus pan and an overload indicator. Two stereo 1/4-inch line inputs and a dedicated stereo RCA tape input cover the computer and a phone or media player. Outputs are a stereo master pair, a stereo tape/record output and a stereo headphone output with a 22 ohm output impedance.
The published figures are tidy for a small board: frequency response from mic input to output of 20 Hz to 30 kHz +0/-1 dB at unity gain, equivalent input noise of -125 dBu, crosstalk of -85 dB at 1 kHz and a noise floor of -100 dBu with levels down. It runs from an external 18 VAC supply, measures 43 x 140 x 196 mm and weighs 1.4 lb (0.6 kg).
- Pros: tiny footprint and weight; a real mic preamp plus three stereo sources; headphone output included; simple enough to set once and forget
- Cons: no USB connection; only one microphone input and no second output pair for control-room style switching; EQ is 2-band and only on the mic channel
Buy if: your desk needs one microphone, the computer and one more source mixed to speakers and headphones in the smallest box possible. Skip if: two microphones or USB audio are on your list.
Maono Maonocaster Lite AU-AM200
The Maonocaster Lite AU-AM200 takes a different route: it is a streaming console first and a mixer second. It connects to the computer over USB-C as a plug-and-play device with no driver, and it adds sound pads, voice effects and a battery, which the other four do not offer.
Two microphone inputs are provided, both 3.5 mm jacks for condenser microphones that do not need external power; there is no phantom power, no XLR input and no support for USB microphones, so microphone choice is narrower than on the Yamaha or Behringer. An output jack feeds audio playback devices such as speakers and headphones, a headset interface takes a 3.5 mm headset, and three POD outputs on TRRS cables can send the program to phones or tablets for multi-platform streaming. A separate music input accepts accompaniment from another source, and Bluetooth is built in for wireless accompaniment playback only.
Controls include separate microphone and accompaniment volume knobs, a reverb fader and a monitor volume fader for real-time headphone monitoring. Eight preset sound effect buttons and four custom pads trigger clips, while the voice section offers effect modes, pitch change, a denoise mode, a side chain mode that lowers music under speech, and loop back for routing computer music into the stream. Audio runs at 48 kHz/16-bit with a frequency response of 20 Hz to 20 kHz, THD below 0.5 percent at 1 kHz and a headset output of 35 mW at 32 ohms. The built-in 1200 mAh battery gives roughly 8 hours of use, charging in about 3 hours at 5 V/1A, and the console measures 24 x 14 x 4.2 cm.
- Pros: sound pads, voice effects and denoise built in; battery power for away-from-desk streaming; three phone outputs for multi-platform shows; real-time monitoring with its own fader
- Cons: microphones are limited to 3.5 mm condensers with no phantom power or XLR; 48 kHz/16-bit audio only; THD figures are looser than the conventional mixers here; the speaker output is a single 3.5 mm jack rather than a balanced pair
Buy if: you stream or record voice content and want effects, pads and a battery in the same box that feeds your speakers. Skip if: you own an XLR condenser microphone or want the quietest, plainest signal path to your speakers.
Buying guide: choosing a mixer for a pc speaker desk
The right choice depends on how the computer connects, how many microphones you run, and how you switch between speakers and headphones during the day. The points below cover the decisions that actually change day-to-day use on a desk, rather than the specifications that only look different on paper.
USB hub or analog go-between
A USB mixer becomes the computer’s sound device, so games, calls and music all arrive through one cable and the microphone returns on the same link. An analog board instead trusts the computer’s own output or a separate interface, and in return it keeps working with any source, including ones with no USB at all.
Pick USB for a one-cable desk; pick analog if you already own an interface you like, or if the mixer must also serve sources that never touch the computer.
Speaker and headphone switching
Look for a headphone output with its own level control, and ideally a second output pair for the speakers, like the Mix8’s control room outs or the AG03MK2’s monitor outs. Boards with a single shared output force you to unplug or mute something every time you swap between speakers and headphones, which gets old within a week.
Microphone inputs and power
Count the microphones you will really plug in. One good preamp with phantom power covers most desk condensers; two preamps matter for a co-host or a mic-plus-instrument setup. Check the connector, too: the Maono accepts only 3.5 mm microphones, while the Yamaha, Behringer and Mackie boards take standard XLR microphones.
Call and stream routing
If the desk hosts calls or streams, loopback and mix-minus stop the classic echo problem where a guest hears themselves. The AG03MK2 builds both in; the AM200 offers loop back and side chain ducking. Plain analog boards can still feed a call through the computer’s own routing, but the mixer will not manage it for you.
Desk footprint and power
Measure the space beside your monitor before choosing. The Mix5 and AG03MK2 fit under a monitor stand; the 802S and Mix8 need a clear patch of desk. Bus-powered USB models also remove a wall adapter from the cable run, while the analog boards and their external supplies add one.
Stereo sources beyond the computer
Most desks grow a second source within a year: a phone for calls or music, a game console, a turntable preamp or a work laptop. Boards with a spare stereo channel or a dedicated tape or streaming input, like the Mix8, Mix5 and 802S, absorb that extra source without cable swapping.
The AG03MK2 covers the same need with its smartphone jack, and the AM200 with its music input and Bluetooth accompaniment, so the question is less whether a second source fits and more which connector it will use.
FAQ
Short answers to the questions that come up most when a mixer joins a computer desk, covering connections, speaker types, recording paths and what these boards cannot do. If your question is about a specific model, the product sections above carry the verified figures behind each answer.
Can these mixers drive passive speakers?
No. Every output on these five mixers is line level, made for powered (active) desktop speakers or a separate amplifier. Passive speakers need a power amplifier between the mixer and the speakers; connecting them straight to a line output will give almost no volume.
How does the computer connect to an analog mixer like the Mix5 or Mix8?
With a cable from the computer’s headphone jack or line output, or from a separate USB interface, into a stereo channel or the RCA tape inputs. A 3.5 mm to dual RCA or dual 1/4-inch cable is the usual link. The mixer then sends the combined mix to the speakers and headphones.
Will a USB mixer here also record my microphone to the computer?
Yes. The AG03MK2, Xenyx 802S and Maonocaster Lite all appear as USB audio devices, so the microphone (and on the Yamaha and Behringer, the full mix) can be recorded by your software while computer playback returns to the speakers and headphones for monitoring.
Do I need phantom power for a desk microphone?
Only if the microphone is a condenser that requires it. The AG03MK2, 802S and Mix8 provide +48 V phantom power; dynamic microphones do not need it and ignore it. The Maonocaster Lite has no phantom power and expects 3.5 mm microphones that run without external power.
Can I listen on headphones without the speakers playing?
Yes, on all five models covered here. Each has a headphone output with its own level control, and the speaker output can be turned down or switched separately, most neatly on the Mix8 with its control room level and on the AG03MK2 with its monitor outputs.
Conclusion
For most desks, the Yamaha AG03MK2 is the cleanest answer among these mixers for pc speaker work: one USB-C cable, a proper monitor output pair, headphones beside them, and call routing built in. Choose the Behringer or a Mackie if microphones and analog sources matter more, and the Maono if streaming effects are the point.