Key takeaways
- Compare stainless steel cooking grates for gas grills by fit, rod size, dimensions and construction, with options for Weber, AOG and other gas grill models.
Worn grates can rust, flake and leave food sticking where the surface has broken down. This guide compares stainless steel cooking grates for gas grills by exact dimensions, rod size, construction and listed fit, so you can match a replacement to your grill with care before you order it for the next cook.
Quick verdict
For a Weber owner who wants a solid rod set, the Weber 83030 and the Weber Gourmet set cover two different layouts. For AOG owners, the AOG rod set lists a clear rod figure in inches here. Hongso and QuliMetal cover narrower or newer Weber fits, and the Weber channel set suits older models.
No single set fits every grill, and that point matters more than any general claim about stainless steel. The makers separate these products by model family, control layout and total cooking surface, so a grate that looks close in a photo can still sit wrong in the firebox. Start with the table, then read the product notes for the exact limits that apply to your grill.
If your grill uses channel formed grates rather than rods, the Weber channel set is the closer match in form, even though its total size is similar to the rod sets listed here.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Weber Gourmet BBQ System Cooking Grate Set 7586 | Stainless steel, 3 pieces | Spirit and Genesis owners who want a removable center | 23-3/4 inches x 17-1/2 inches overall | Accessories are sold separately |
| AOG 5/16in. Rod Cooking Grate Set 24-B-11 | Solid stainless steel rod, set of 2 | AOG grills that need this exact total size | 5/16 inches rod diameter | Fit depends on matching the listed total size |
| Weber 83030 Genesis 300 Stainless Steel Cooking Grate | Solid stainless steel rod, sold individually | Genesis 300 owners replacing one grate section | 19 1/2 inches x 12 3/4 inches, 3/8 inches rods | Sold individually, not as a full set |
| Weber Channel Formed Cooking Grate Set 65619 | Channel formed stainless steel, 2 pieces | Older Genesis, Spirit and Summit models | 23-1/2 inches x 17-3/8 inches total | Channel form, not solid rods |
| Hongso 65905 304 Stainless Steel Grill Grates | Solid rod, set of 2 | Spirit 200 models with side controls | 15 inches x 11.25 inches each, 7 mm rods | Does not fit front control models |
| QuliMetal 66095 Stainless Steel Cooking Grates | Stainless steel, pack of 2 | Genesis II and Genesis II LX 300 owners | 18.75 inches x 13.25 inches | Maker page does not state rod diameter |
How we selected
This selection came from maker and listing pages that state a product name, a material, a size and a grill fit in plain terms. Sets that did not state dimensions, that mixed grates with burners and other parts, or that gave no clear model fit were left out, even when the material sounded right for this topic.
Fit was treated as a hard limit, not as a suggestion. A listing that limits a set to side control models, to older models, or to one series was described with that limit in place.
Best stainless steel cooking grates for gas grills
Each set below serves a different grill family, grate form or control layout. Read the fit line first, then the dimensions, then the construction notes. A set that matches on material but misses on model, year or total size is not a match, and the notes call out those limits for every product in this section.
Weber Gourmet BBQ System Cooking Grate Set 7586
This set is for Weber owners who want more than a flat replacement surface. The maker lists it for Spirit and Spirit II 300 Series grills and for several Genesis families, and the three piece layout adds a removable center that the other sets in this guide do not offer in the same way.
The maker describes this as a genuine Weber stainless steel three piece cooking grate set for the Gourmet BBQ System. The maker lists an overall size of 23-3/4 inches x 17-1/2 inches, with one left side piece, one right side piece and one round removable center piece that measures 12 inches in diameter. The maker lists the fit as Spirit and Spirit II 300 Series, Genesis 1000-5000, Genesis Silver B/C and Genesis Gold/Platinum. Used together, the maker describes the pieces as a traditional grilling grate surface. With the center removed, the opening is for Gourmet BBQ System accessories, which the maker lists as sold separately.
That system idea is the main reason to choose this set over a plain rod set.
- Three piece layout with a removable center for system accessories
- Clear overall dimensions and a broad listed Weber fit
- Stainless steel construction from the original maker
- Accessories for the center opening are sold separately
- Maker does not state rod diameter on the page
- Extra pieces mean more edges to brush clean
Buy if your Weber matches the listed families and you want the option to use a center insert. Skip if you want a simple two piece rod surface, if your model is outside the listed families, or if you need a stated rod diameter to make your decision.
AOG 5/16in. Rod Cooking Grate Set 24-B-11
This set is for AOG owners and for owners of other grills that need the exact total size the maker lists. It is a plain solid rod set with no system insert and no channel form, aimed at a direct replacement where the old surface was also made from solid stainless steel rods laid across the firebox.
The maker lists this as a genuine AOG solid stainless steel rod cooking grate set crafted from 5/16 inches diameter solid stainless rod. The set includes two grates, each measuring 18 inches x 11-9/16 inches, for total set dimensions of 18 inches x 23-1/8 inches. The maker lists compatibility as a variety of AOG gas grills and many other brands and models, and other grills that require 18 inches x 23-1/8 inches grate sections. The maker describes the grates as rust resistant in its wording and as easy to clean, and as a surface that makes sear marks for everyday grilling.
The clear rod figure helps here, because an owner can compare rod thickness directly with the Weber 83030 and the Hongso set below.
- Clear 5/16 inches solid rod figure stated by the maker
- Two piece set with each piece size stated
- Maker lists use for AOG and other grills needing this size
- Broad fit note rather than a detailed model list
- No material grade stated on the page
- Fit rests heavily on matching the total dimensions
Buy if your AOG or other grill needs the listed total size and you want solid rods. Skip if your opening measures differently, if you need a named material grade, or if you want a set tied to one exact model family.
Weber 83030 Genesis 300 Stainless Steel Cooking Grate
This grate is for Genesis 300 owners who need to replace a section rather than buy a bundled pair. The listing is clear that it is sold individually, which suits an owner with one worn section and a second section that is still flat, clean and sitting level on its supports in the firebox.
The listing lists dimensions of 19 1/2 inches x 12 3/4 inches and solid 3/8 inches stainless steel rods. It lists fit for Weber Genesis 300 series gas grills, including older Genesis E-310, E-320 and E-330 and similar 300 models, and it advises confirming the grill model number to support proper fit. The listing describes premium stainless steel construction in its wording, a smooth surface for consistent heat and easy searing, and simple replacement for older or damaged grates. Because it is sold individually, an owner who needs full coverage should plan on the correct count for the firebox rather than assuming one unit covers the whole surface.
The 3/8 inches rod figure is the thickest rod figure stated among the products in this guide, stated in inches rather than in millimeters.
- Thick 3/8 inches solid rods stated in the listing
- Single grate size is stated clearly
- Useful when only one section needs replacing
- Sold individually, so full coverage may need more than one
- Fit is limited to the Genesis 300 family named
- No material grade stated on the page
Buy if you own a listed Genesis 300 model and your measured section matches the stated size. Skip if you need a complete set in one pack, if your grill is a Genesis II model, or if your section size differs from the listing.
Weber Channel Formed Cooking Grate Set 65619
This set is for owners of older Weber grills whose original surface was channel formed rather than built from round rods. The maker lists it for older Genesis, older Spirit and older Summit models, which makes it a focused option for keeping the same grate form as the grill was built with.
The maker describes this as a genuine Weber channel formed, rolled stainless steel cooking grate two piece set. The maker lists two grates measuring 11-3/4 inches x 17-3/8 inches each, for a total area of 23-1/2 inches x 17-3/8 inches. The maker lists the fit as older Genesis in Silver B/C and Platinum/Gold forms, older Spirit 300 Series and older Weber Summit models, and it asks buyers to verify dimensions. The maker describes the grates as rust resistant in its wording and as easy to clean, and as spreading heat for sear marks in everyday grilling.
Channel form changes the feel of the surface.
- Matches the channel form used on many older Weber grills
- Each piece and total size are both stated
- Listed for older Genesis, Spirit and Summit models
- Not a solid rod grate, so rod comparisons do not apply
- Fit is for older models, not newer series
- Maker does not state a material grade on the page
Buy if your older Weber used channel formed grates and the total size matches. Skip if you want solid rods, if your grill is a newer series, or if your total area differs from the size the maker lists for this set.
Hongso 65905 304 Stainless Steel Grill Grates
This set is for owners of smaller Weber grills with side mounted controls, plus the other models the listing names. The control layout limit is central here: the listing states in clear terms that this set fits side control models and does not fit front mounted control panel models at all.
The listing lists dimensions of 15 inches x 11.25 inches each and 15 inches x 22 1/2 inches in total, as a set of 2. It lists the material as SUS 304 stainless steel, with rods of 7 mm in diameter, and describes the material as food grade in its wording. It lists fit for Weber Genesis Silver A and Spirit 500, and for Weber Spirit 200 Series with a side mounted control panel, including Spirit E 200, Spirit E-210, Spirit S 200 and Spirit S 210 in the years the listing names. It also lists a group of Kenmore models, so owners of those models should compare their model number with the listing before ordering.
The stated grade is a useful point of difference.
- SUS 304 grade and 7 mm rod diameter both stated
- Each piece and total size are both stated
- Clear note on side control versus front control fit
- Does not fit front mounted control panel models
- Fit list is limited to the models and years named
- Smaller total surface than the larger Weber sets here
Buy if your grill is a listed side control model and the total size matches your old grates. Skip if you have front controls, if your model year falls outside the listing, or if you need a larger total cooking surface.
QuliMetal 66095 Stainless Steel Cooking Grates
This pack is for Genesis II and Genesis II LX 300 owners, a group the older Genesis sets in this guide do not serve. That newer series focus is its main value, because Genesis II fit is often confused with the earlier Genesis 300 fit, and the two should be kept separate when ordering.
The maker page lists this product as QuliMetal 66095 Stainless Steel Cooking Grates measuring 18.75 inches x 13.25 inches, for Weber Genesis II and Genesis II LX 300 Series gas grills, as a pack of 2. The maker does not state a rod diameter for this pack and does not state a material grade for it, so this guide does not assign either figure to this product. An owner who needs those figures should ask the maker or listing page for them before ordering.
Even with fewer stated construction details, the fit clarity matters.
- Listed directly for Genesis II and Genesis II LX 300 grills
- Size and pack of 2 are stated in the product name
- Keeps newer series fit separate from older Genesis fit
- Maker does not state a rod diameter for this pack
- Maker does not state a material grade for this pack
- Fewer construction details than the other sets here
Buy if you own a Genesis II or Genesis II LX 300 grill and the stated size matches. Skip if you own an earlier Genesis model, if you need a stated rod figure before buying, or if your measured grate size differs.
Buying guide
A good replacement starts with the grill, not with the material name. Model family, model year, control layout and total grate size narrow the field fast, and only after those points match does it help to compare rod form, rod size and grade. The sections below follow that order for a reason.
How to measure stainless steel cooking grates for gas grills
Measure the old grates before you look at any new set, and measure each piece as well as the full set together. Makers in this guide state both figures for several sets, and the two figures answer different questions: piece size shows the layout, while total size shows the full surface the firebox must support.
Lay the old pieces in place and note how they sit on the supports, not just how long and wide they are. A set can share a total width with another set and still divide that width into a different count of pieces.
Solid rods, channel form and system grates
Rod grates, channel formed grates and system grates are three different answers to the same job. Solid rods give an open surface with clear rod figures where makers state them, channel form matches many older Weber grills, and a system grate adds a removable center for inserts that a plain surface cannot use.
Choose the form your grill and your cooking call for, rather than assuming one form is always ahead of the others. An owner who never uses inserts gains little from a system opening, while an owner who uses them often would miss that opening on a plain set.
Rod diameter and material grade
Rod diameter and grade are useful only when a maker states them in plain terms. In this guide the AOG set states a rod figure in inches, the Weber 83030 states a larger rod figure in inches, and the Hongso set states a rod figure in millimeters and a SUS 304 grade, while other pages leave one or both points unstated.
Do not convert a missing figure into a guess, and do not borrow a figure from a similar model by the same maker. If rod size or grade will decide your purchase, and the page for the exact set does not state it, ask the maker or listing page for that exact product.
Model, year and control layout
The same family name can cover grills that take different grates. This guide shows that plainly: one Hongso set is limited to side control models, one Weber set is limited to older models, and the QuliMetal pack is listed for Genesis II models while the Weber 83030 is listed for the earlier Genesis 300 family.
Use the full model name, the year range when a listing gives one, and the control position on your grill. Front controls and side controls are not a minor detail; at least one listing in this guide excludes front control models outright.
Care, cleaning and storage
Stainless steel grates still need regular care, even though the makers describe several of these sets as easy to clean. Brush the surface while it is warm after cooking, lift out loose debris, and keep the firebox below the grates clear so drippings do not build up and smoke or flare during the next cook you plan.
For deeper cleaning, let the grates cool, wash them with ordinary dish soap and water, dry them fully, and return them to the grill or store them dry. Avoid leaving wet grates sitting in a closed grill for long stretches, and avoid harsh tools that gouge the surface and give residue more places to cling.
FAQ
The questions below cover the points that most often cause a wrong order: fit across series, piece count, rod size, grade and care. Each answer stays within what the makers and listings in this guide state, and each one points back to measuring and model matching as the first step before any purchase.
How long do stainless steel cooking grates for gas grills last?
There is no single figure that the makers in this guide state for service life, and this guide does not assign one. Life depends on heat, cleaning, storage and how often the grill is used, so a grate that is brushed, dried and kept under a lid will usually stay in better shape than one left wet and dirty.
Judge a grate by its condition rather than by age alone. Look for deep pitting, flaking, warping that stops it sitting level, and rods or channels that have thinned or cracked.
Can I use a Genesis grate in a Spirit grill, or the reverse?
Only when a maker lists both families for the same set, as the Gourmet and channel sets in this guide do for certain models and years. Other sets here are limited to one family, so a Genesis 300 grate should not be assumed to fit a Spirit grill, and a Spirit set should not be assumed to fit a Genesis grill.
Family names overlap in size more often than they overlap in exact fit. Supports, piece layout and total area can differ even when two grills look similar from the outside.
How many grates do I need for full coverage?
It depends on how the maker sells the product. Some sets here include two pieces, one includes three pieces, and the Weber 83030 is sold individually, so full coverage for that grill means ordering the count that fills the firebox rather than assuming a single unit will cover the whole cooking surface.
Count the pieces in your grill now and match that layout unless the new set divides the same total area in a different way that the maker states. If a listing gives both a piece size and a total size, use the total to confirm coverage and the piece size to confirm layout.
Does a thicker rod always cook better?
No. A thicker rod adds metal to the surface and can change how marks form and how the surface holds heat, but spacing, form, burner layout and preheat also shape the result. The sets here state different rod figures, and one channel set and one system set state no rod figure at all, yet each serves its listed grills well.
Use rod size as a comparison point between rod sets that both fit your grill, not as a reason to force a set that does not fit. A correct fit with a thinner rod will cook more evenly than a poor fit with a thicker rod that rocks on its supports or leaves gaps at the edges of the firebox.
What grade of stainless steel should I look for?
Look for a grade only where the maker states it for the exact product. The Hongso listing in this guide states SUS 304 for its set, while several other pages state stainless steel without naming a grade. A stated grade gives you a clearer material point to compare, but an unstated grade is not proof of poor quality.
If grade matters to you, choose among sets that fit your grill first, then prefer a set whose page states its grade in plain terms. Do not assign a grade to a product because another product from the same maker states one, and do not let a grade claim override a fit limit such as control layout, model year or total size.
Conclusion
Match the grill first and the material second. Genesis II owners should start with the QuliMetal pack, Genesis 300 owners with the Weber 83030, older Weber owners with the channel or Gourmet sets, AOG owners with the AOG rod set, and side control Spirit owners with the Hongso set. Measure, then order.