Updated Nov 17, 2026· 16 min read

Key takeaways

  • Compare five single loop water cooler kits for a custom CPU loop, with pump, reservoir, radiator, block, tubing and fittings covered, plus a clear buying guide.

A custom loop can cool a CPU with more surface area than a tower air cooler, yet the parts list can feel long and easy to get wrong. The best single loop water coolers in this roundup are kits that put the pump, reservoir, radiator, CPU block, tubing and fittings in one box, so a first loop starts from matched parts.

Quick verdict

Five kits made the cut, and they split cleanly by radiator size, tube style and pump type. Two Thermaltake kits cover 240 mm and 360 mm hard tube builds, Corsair adds a D5 powered hard tube kit, EK covers a soft tube Intel build, and Alphacool pairs a thick copper radiator with hard tube parts.

Product Type Best for Key spec Main limit
Thermaltake Pacific C360 DDC Hard Tube Water Cooling Kit Hard tube kit Large cases and lit builds 360 mm copper radiator, 29.5 mm thick Needs room for a 360 mm radiator
Thermaltake Pacific C240 DDC Hard Tube Water Cooling Kit Hard tube kit Smaller cases and first hard tube loops 240 mm copper radiator, 29.5 mm thick Less radiator area than the 360 mm kit
CORSAIR Hydro X Series iCUE XH305i RGB PRO Custom Cooling Kit – White Hard tube kit White builds with software control 360 mm radiator, 30 mm thick, D5 pump White finish suits only light color builds
EK-Quantum Power2 Kit P360 Series – Intel 1700 Soft tube kit Intel LGA 1700 first time builders 360 mm radiator, 44 mm thick, D5 pump CPU block fits Intel LGA 1700 only
Alphacool Core Hurricane 360mm XT45 HardTube Water Cooling Set Hard tube kit Thick radiator builds with glass reservoir 360 mm copper radiator, 45 mm thick Thick radiator needs deep case clearance

How we selected

Selection started with maker pages and listing pages that show the full kit contents, then kept only kits built around one loop for one CPU. Each pick had to include a pump and reservoir, a radiator, a CPU water block, tubing, fittings and coolant, with socket fit stated on the page.

A single loop means one pump moves coolant through one circuit: from the CPU water block to the radiator and back to the reservoir. That differs from a closed loop cooler, which arrives sealed and filled, and from a dual loop, which runs two circuits.

Best single loop water coolers in this roundup

The five kits below cover the main ways to build a single CPU loop: hard tube or soft tube, 240 mm or 360 mm radiators, and DDC or D5 pumps. Read the fit notes first, then match the tube style and radiator size to the case you own and the look you want.

Thermaltake Pacific C360 DDC: a full single loop water cooler kit

This Thermaltake kit is the broadest hard tube pick in the roundup, with a 360 mm copper radiator, three lit fans and a DDC pump and reservoir combo. It suits a builder who wants a complete hard tube loop in a case with room for three 120 mm fans in a row.

The maker lists the Pacific C360 radiator at 29.5 mm high, 119 mm wide and 399 mm long, with a copper core. The Pacific PR15-DDC pump and reservoir combo measures 86.54 mm long, 62 mm wide and 140.1 mm high, with a 200 ml reservoir. The Pacific W4 ARGB CPU water block has a copper base with nickel plating, a PMMA cover and 0.15 mm internal fin construction, plus a light ring listed at 16.8 million colors with 12 addressable LEDs. Three Pure 12 ARGB Sync fans are included.

Kit contents cover the rest of the loop: six C-Pro G14 PETG 16 mm OD compression fittings, two G1/4 90 degree adapters, eight V-Tubler PETG tubes at 16 mm OD and 500 mm long, a bottle of T1000 Transparent Coolant Pure Clear, an ARGB LED controller, a 24 pin ATX bridge tool, thermal grease and a silicone insert. Socket fit covers Intel LGA 2066, 2011, 1700, 1366, 1156, 1155, 1151 and 1150, and AMD AM5, AM4, FM2, FM1, AM3+, AM3, AM2+ and AM2.

The main limits are size and build effort. A 360 mm radiator needs a case with a matching mount, and hard tube runs need measuring, cutting and bending. The maker also advises running the loop with the fill port open for about 24 hours to bleed air out.

  • Complete hard tube kit with block, pump, radiator, fans, fittings, tubes and coolant
  • 360 mm copper radiator with three lit 120 mm fans
  • Needs a case that fits a 360 mm radiator
  • Hard tube runs need cutting, bending and careful measuring

Buy if you have a case with a 360 mm radiator mount and want a lit hard tube loop. Skip if your case fits only a 240 mm radiator, or if you would rather route soft tube.

Thermaltake Pacific C240 DDC hard tube water cooling kit

This is the compact twin of the C360 kit, with the same pump, block and fittings around a 240 mm radiator and two fans. It suits a builder whose case has room for two 120 mm fans in a row but not three, and who still wants a full hard tube loop in a smaller case.

The maker lists the Pacific C240 radiator at 29.5 mm high, 119 mm wide and 279 mm long, with a copper core. The pump and reservoir combo and the W4 ARGB CPU water block are the same units as in the larger kit, with a 200 ml reservoir and 0.15 mm internal fin construction. Two Pure 12 ARGB Sync fans are included.

Contents match the larger kit apart from the radiator and fan count: six C-Pro G14 PETG 16 mm OD compression fittings, two G1/4 90 degree adapters, eight V-Tubler PETG tubes at 16 mm OD and 500 mm long, a bottle of T1000 Transparent Coolant Pure Clear, an ARGB LED controller, a 24 pin ATX bridge tool, thermal grease and a silicone insert. Socket fit is the same wide list.

The limits are the same kind as the larger kit, scaled down. Hard tube work still needs measuring and bending, and the loop still needs a careful fill and bleed. The maker advises running the loop with the fill port open for about 24 hours to bleed air out.

  • Same pump, block and fittings as the 360 mm kit in a smaller package
  • 240 mm copper radiator fits more mid size cases
  • Wide Intel and AMD socket list, including LGA 1700 and AM5
  • Less radiator area than the 360 mm version
  • Hard tube runs still need cutting and bending

Buy if your case fits a 240 mm radiator and you want the hard tube look in a smaller build. Skip if your case can hold a 360 mm radiator, or if you would rather build with soft tube.

Corsair Hydro X Series iCUE XH305i RGB PRO custom cooling kit in white

This Corsair kit is the white hard tube option in the roundup, built around a D5 pump and reservoir combo and controlled through Corsair iCUE software. It suits a builder planning a white build who wants fan, pump and lighting control in one software view.

The maker describes the XC7 RGB PRO CPU water block as compatible with Intel LGA 1700 and LGA 1200 and AMD AM5 and AM4 sockets. The XD5 RGB pump and reservoir combo uses a D5 PWM pump with integrated RGB lighting and an in-loop temperature sensor. The XR5 radiator is a 360 mm unit, 30 mm thick, with a copper core. Three iCUE QL120 RGB PWM fans are included, and the maker lists 34 RGB LEDs split across four distinct light loops. An iCUE controller is included for fan and pump settings and temperature monitoring.

The kit also includes the tools for hard tube work: a hacksaw, a tube reamer, a silicone rod, a tube bending mandrel and a sawing clamp. XT Hardline tubing in clear PMMA is included, along with black XF Hardline fittings and adapters. XL8 Performance Coolant is included, pre-mixed with anti-corrosion and anti-bacterial inhibitors.

The main limits are color and ecosystem. The white finish looks best in a white or light case, and the lighting and fan control work through the included iCUE controller and software. A 360 mm radiator still needs a matching case mount. The maker does not state the reservoir capacity or the radiator length on the page opened for this roundup.

  • D5 PWM pump and reservoir combo with an in-loop temperature sensor
  • 360 mm copper core radiator, 30 mm thick, with three QL120 fans
  • iCUE controller included for fan, pump and lighting control
  • White finish suits only light color builds
  • Lighting control runs through the included iCUE controller

Buy if you are building a white system and want a D5 pump with a temperature sensor. Skip if your build is dark colored, or if your case fits only a 240 mm radiator.

EK-Quantum Power2 Kit P360 Series: a soft tube single loop water cooler

This EK kit is the soft tube pick in the roundup, built for Intel LGA 1700 with a D5 pump and reservoir combo and a 44 mm thick radiator. It suits a first time builder who wants flexible tubing, a drain port and a generous set of build tools in the box.

The maker lists the EK-Quantum Velocity2 D-RGB CPU water block for Intel LGA 1700 and 12th or 13th generation processors, with an OptiFlow cooling engine and an EK-Exact Mount system. The EK-Quantum Surface P360M radiator is 44 mm thick, with sixteen 2 mm wide copper tubes, 18 FPI non-louvered copper fins, four G1/4 threaded ports and a fifth G1/4 port on the end tank for draining and bleeding air. Three EK-Loop Fan FPT 120 D-RGB fans are included, listed at 550 to 2300 rpm with PWM control.

The EK-Quantum Kinetic TBE 200 D5 PWM D-RGB pump and reservoir combo uses a Xylem D5 PWM pump, with a rubber shock absorber that decouples the pump body from the mounting clip, plus mounting at any angle within 360 degrees of rotation. Six EK-Quantum Torque STC-10/16 compression fittings for 10/16 mm soft tube are included, along with two Torque Rotary 90 degree adapters with G1/4 threads. The kit includes 3 meters of EK-Loop Soft Tube 10/16 mm in clear, and 100 mL of EK-CryoFuel Clear concentrate to be mixed at a ratio of 1:9 to form 1 L of coolant.

Extras include a dye pack with red, yellow and blue dye bottles, a 24 pin ATX bridging plug, a D-RGB 6-way splitter cable for up to 6 D-RGB products, a 3-fan PWM Y-splitter cable 10 cm long, a Uni Pump Reservoir Bracket, two RES X3 holders at 60 mm, a soft tube cutter, a foldable filling bottle and a multi Allen key. The main limit is socket fit: the block in this kit is made for Intel LGA 1700, so AMD builders should look at a different kit.

  • Soft tube routing with 3 meters of clear 10/16 mm tube included
  • 44 mm thick radiator with a fifth port for draining and bleeding
  • D5 PWM pump and reservoir combo with decoupled mounting
  • CPU block fits Intel LGA 1700 only in this kit version
  • Coolant concentrate needs distilled water and mixing

Buy if you run Intel LGA 1700 and want soft tube for an easier first build. Skip if you run an AMD CPU, or if you want a hard tube look.

Alphacool Core Hurricane 360mm XT45 HardTube water cooling set

This Alphacool set pairs a thick 45 mm copper radiator with a glass reservoir and a VPP Apex pump, and it is the most detailed kit in the roundup on paper. It suits a builder who wants a thick radiator and a clear view of the reservoir in a case with deep clearance.

The maker lists the NexXxoS XT45 Full Copper 360 mm radiator V.2 at 391.5 mm long, 124 mm wide and 45 mm thick, with copper fins, pre-chambers and channels, brass threads, a stainless steel outer housing, four G1/4 ports and one fill and drain G1/4 port. The Eisblock XPX Aurora Edge CPU cooler measures 70 mm by 70 mm by 32.5 mm, with a nickel-plated copper cooler, two G1/4 threads, 15 digital aRGB LEDs, a maximum working temperature of 60 degrees Celsius and a pressure test rating of 0.8 Bar. The maker lists 81 cooling fins on the CPU cooler base, spread over an area of 34 mm by 32 mm.

The Eisbecher Aurora D5 250 mm reservoir measures 77 mm by 77 mm by 242 mm, with a 250 ml capacity, an acetal housing, a glass tube, one G1/4 inlet and four G1/4 outlets, and 5V digital addressable LEDs at 0.3A. The VPP Apex pump measures 65 mm by 65 mm by 41 mm, runs at 2500 to 4500 RPM on 8 to 13V DC at 14W, with a maximum pumping head of 4.25 m and a maximum flow rate of 340 L/h. Rise Aurora 120 mm fans run at 0 to 2500 rpm, with a maximum air flow of 118.9 cubic meters per hour and a maximum noise level of 31.5 dB(A).

Eisrohr PETG HardTube in 16/13 mm size is included as four 60 cm lengths, with a wall thickness of 3 mm, plus Eiszapfen 16/13 mm G1/4 fittings in brass and black. The included Subzero thermal paste has a thermal conductivity of 16 W/mk, and the included Tec Protect 2 Clear coolant comes in a 1 L bottle. Socket fit covers Intel 775, 1056, 1155, 1150, 1151, 1200, 1700, 2011, 2011-3 and 2066, and AMD AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+, AM4 and AM5.

The main limit is clearance: a 45 mm thick radiator plus 25 mm fans needs a deep mount, so check the case before ordering. The fan speed range starts at 0 rpm, which needs a matching fan curve. The maker does not state the number of fans or fittings on the page opened for this roundup.

  • 45 mm thick full copper radiator with a fill and drain port
  • Glass reservoir with a 250 ml capacity and aRGB lighting
  • Detailed pump, fan and coolant data on the listing
  • Wide Intel and AMD socket list, including LGA 1700 and AM5
  • Thick radiator plus fans needs deep case clearance
  • Fan stop range needs a careful fan curve

Buy if your case has room for a 45 mm radiator and you like a glass reservoir. Skip if your case has shallow radiator mounts, or if you want a thinner radiator.

Buying guide

Five choices decide most of a single loop build: radiator size, pump and reservoir layout, tube style, socket fit and the care routine. Work through them in that order, and the kit list narrows fast to the one that fits your case, your board and your plans.

Radiator size and case fit in the best single loop water coolers

Measure the case before anything else, because a radiator that does not fit cannot be fixed with a different fan. Check the mount length for 240 mm or 360 mm, the depth for the radiator plus fans, and the clearance around memory, fittings and the top of the board.

A 240 mm radiator fits more cases, while a 360 mm radiator gives three fan positions of surface area. Thickness matters too: the kits here range from 29.5 mm to 45 mm thick. If the case manual lists radiator support, use that list as the first check.

Pump and reservoir layout

The pump moves the coolant and the reservoir gives air a place to collect, so their combined size and mount decide where the loop can live. A pump and reservoir combo saves space by joining the two parts, and every kit in this roundup uses that layout.

DDC combos are compact, with the Thermaltake units at 86.54 mm long, 62 mm wide and 140.1 mm high, while D5 combos are larger. Mount the reservoir so the fill port is reachable, and never let the pump run dry.

Tubing, fittings and coolant

Tubing and fittings must match in size, and the coolant must suit the metals in the loop. Hard tube kits in this roundup use 16 mm OD tube, while the EK soft tube kit uses 10/16 mm tube with matching compression fittings, so do not mix sizes across kits.

Hard tube gives rigid, planned runs and needs a saw, a bending mandrel, a silicone insert and a deburrer. Soft tube is easier to route and needs only straight cuts. Pre-mixed coolant fills straight from the bottle, while a concentrate like the EK CryoFuel needs distilled water mixed at the stated ratio.

CPU socket fit and block mounting

A water block that does not match the CPU socket is useless, so check the socket list on the kit page before ordering. The Thermaltake and Alphacool kits list wide Intel and AMD socket ranges, the Corsair kit lists Intel LGA 1700 and 1200 with AMD AM5 and AM4, and the EK kit in this roundup is made for Intel LGA 1700.

Mounting hardware matters as much as the socket list. Apply thermal paste in a thin, even layer, tighten the block in a cross pattern, and check that the block sits flat before filling the loop.

Noise, lighting and control

Noise in a custom loop comes from fans and the pump, and control comes from the fan headers, the pump header and the lighting controller. A kit with PWM fans and a PWM pump lets the board slow both parts down at idle, which keeps the build quiet during light use.

Lighting control splits into two styles: board based 5V addressable headers, used by the Thermaltake and Alphacool kits, and the included iCUE controller, used by the Corsair kit.

FAQ

These answers cover the questions that come up most often when a builder moves from a closed loop cooler to a first custom loop. Each one stays close to how the kits in this roundup are built, filled and cared for in a home PC over time, in plain terms.

What is a single loop water cooler?

A single loop water cooler is one open circuit that cools one CPU: a pump pushes coolant from the CPU water block to a radiator, fans move air across the radiator, and the coolant returns to the reservoir. All the parts are separate, so the builder can pick the radiator size, tube style and pump type.

It differs from a closed loop cooler, which arrives sealed and filled, and from a dual loop, which runs two separate circuits. The kits in this roundup are single loop kits, each with one pump, one reservoir, one radiator and one CPU block.

Can a single loop cool a CPU and a graphics card?

A single loop can cool a CPU and a graphics card if the radiator area and the pump can handle the added heat, but the kits in this roundup are sold as CPU loops. Adding a graphics card block means adding a second water block, more fittings and more tube, and it raises the heat load on the same radiator.

The EK kit page states that the loop can be upgraded with additional water blocks and radiators, but no kit in this roundup includes a graphics card block.

Hard tube or soft tube for a first loop?

Soft tube is the easier first build, because it bends by hand, needs only straight cuts, and forgives small measuring errors. Hard tube looks cleaner and holds its shape, but each run must be measured, cut, bent with heat and deburred before it will seat in a fitting.

The EK kit in this roundup is the soft tube option, with 3 meters of 10/16 mm tube and six compression fittings, while the other four kits use hard tube in 16 mm or 16/13 mm sizes. A first time builder who wants the hard tube look should buy a spare length of tube and practice one bend on scrap first.

How often does a custom loop need care?

A custom loop needs regular care, and the routine is simple: check the coolant level, look for damp fittings, and listen for air in the pump. The maker of the Thermaltake kits advises flushing radiators and blocks with distilled water before use and bleeding air for about 24 hours after the first fill.

Over time, coolant can fade in color and pick up fine particles, so plan a drain and refill on a regular schedule and keep a spare bottle of the same coolant on hand.

Do I need extra parts beyond the kit?

Most builders can finish a loop from the kit box, since each kit here includes the block, pump, reservoir, radiator, fans, tubing, fittings and coolant. The extras that still help are distilled water for flushing and mixing, paper towels for leak checks, and a spare fitting or two in the same size as the kit.

The kits also include useful tools: the Thermaltake kits include a bridge tool and a bending insert, the Corsair kit includes a saw and a bending mandrel, and the EK kit includes a tube cutter and a filling bottle.

Conclusion

Pick the Thermaltake C240 for a compact hard tube build, the C360 or the Corsair XH305i for a full size lit loop, the EK Power2 kit for an easy Intel soft tube build, and the Alphacool set for a thick radiator with a glass reservoir. Measure the case first, match the tube size to the fittings, then build with care.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.