Updated Nov 16, 2026· 15 min read

Key takeaways

  • Five smoke generators for vertical smokers compared on printed specs: burn time, fuel load, mounting method and cabinet size, from tubes to pump-fed units.

A vertical smoker has height to spare but a small floor, so the best smoke generator for vertical smokers either mounts outside the cabinet or lies flat on a lower grate. The five picks below were checked on opened listing, maker and manual pages for burn time, fuel and fit. Each one was checked on an opened listing, maker or manual page.

Quick verdict

The five picks split into two mounting styles. Three are external units that feed smoke through a tube or a drilled fitting: the Masterbuilt Slow Smoker made for Masterbuilt vertical electric smokers, the two Smoke Daddy pump generators, and the Bradley cold smoke adapter that moves its own brand’s generator away from the cabinet.

The fifth, the expandable A-MAZE-N tube, sits inside on a grate like the tubes in the small-smoker guide.

For a Masterbuilt vertical owner, the Slow Smoker is the direct fit: the listing states compatibility with all Masterbuilt Digital Electric Smokers and up to 6 hours of continuous smoke from wood chips. For other vertical cabinets of six cubic feet and up, the Smoke Daddy Magnum P.I.G. is the maker’s own pick for vertical smokers, with 2 to 2-1/2 hours per fill and refills that do not need the cabinet opened. The 8 Inch Smoke Daddy covers medium cabinets with up to about an hour per load.

The A-MAZE-N expandable tube is the no-drilling option: it stretches from 12 to 18 inches, and the maker manual rates those lengths at about 4 and about 6 hours of pellet smoke. The Bradley adapter is brand-specific, but for a Bradley tower it is the maker’s own cold-smoke answer, moving the heat of the generator outside the box so the smoke arrives cooled.

Product Type Best for Key spec Main limit
Masterbuilt Slow Smoker MB20100112 External chip burner Masterbuilt vertical electrics Up to 6 hours of continuous smoke Brand-specific fit
Smoke Daddy Magnum P.I.G. Cold Smoke Generator External pump generator Large vertical cabinets 6 cups of fuel, 2 to 2-1/2 hours Needs a drilled 1-1/8 inch hole
Smoke Daddy 8 Inch Cold Smoke Generator External pump generator Medium vertical smokers Up to about 1 hour per load Shortest burn here
A-MAZE-N 18 In. Expandable Pellet Tube Smoker In-chamber pellet tube No-drill setups Expands 12 to 18 inches, up to 6 hours Uses grate space inside
Bradley Smoker Cold Smoke Adapter BCOLD Cold smoke adapter kit Bradley vertical towers 36-inch aluminum tube, fits all Bradley models Bradley only; adapter, not a burner

How we selected

Selection required a smoke generator that suits a vertical cabinet: an external unit that pipes smoke in, a brand-matched attachment for a vertical electric smoker, or an in-chamber tube that fits a tall, narrow grate layout. Each pick’s burn time, fuel and dimensions were read from an opened listing, maker page or maker manual,.

In the maker’s own wording.

The list was kept distinct from the small-smoker generator guide in this same batch: none of the six picks there appears here. Small in-chamber dust mazes were left there, because a vertical cabinet’s usual problem is not floor space for a maze but smoke supply over a tall chamber, and the external units answer that problem directly.

Two further maker units were checked and left out because their own product pages could not be opened for full specifications; Every figure in the picks below comes from a page that opened in full.

Five smoke generator for vertical smokers picks

The picks are ordered by fit: brand-matched attachments first, then the general external generators from largest to smallest, then the in-chamber tube, and finally the adapter kit that serves one brand’s towers. Burn times are the makers’ printed ratings throughout.

Masterbuilt Slow Smoker (MB20100112)

The Slow Smoker is Masterbuilt’s own smoke attachment for its vertical electric smokers: the listing title calls it a slow and cold smoker accessory attachment with a removable ash tray for Masterbuilt vertical BBQ smokers, in black, 10 by 10 by 18 inches, model MB20100112.

The maker description states it provides continuous smoke for up to 6 hours and is ideal for smoking cheese, fish, bacon and jerky.

The listing states compatibility with all Masterbuilt Digital Electric Smokers, and the maker’s manual narrows that slightly, saying it fits Masterbuilt Digital Electric Smokers with the exception of the MES 400 Series or above; owners of the largest models should check the manual wording before ordering. The manual also states the slow smoker does not cook food: it is a smoke generating accessory, and the attached smoker does the cooking.

Fuel is dry, un-soaked wood chips loaded in the chip tube; the manual says never to use wood chunks. Product information on the listing gives a corded electric power source, alloy steel outer material, 9.95 pounds, and dimensions of 8.1 by 9.8 by 16.8 inches. For the vertical Masterbuilt owner who wants long, cool smoke for cheese or bacon without a separate burner setup, this is the attachment the brand built for the job.

Pros: up to 6 hours of continuous smoke; made for Masterbuilt vertical electrics; removable ash tray; chip fuel. Cons: brand-specific; MES 400 Series and above excluded in the manual; no chunks allowed. Buy if you own a Masterbuilt digital electric vertical smoker. Skip if your vertical smoker is another brand.

Smoke Daddy Magnum P.I.G. Cold Smoke Generator

The Magnum P.I.G. is the maker’s flagship external generator, and its page names this keyword’s use directly: it calls the unit the best choice for the serious meat smoking enthusiast, vertical smokers, or larger grills, and ideal for smokers six cubic feet and larger, including applications of a standard refrigerator size and up.

Assembled dimensions are 16 by 4-1/2 inches.

The body is heavy gauge SCH 40 6061 precision machined aluminum, it holds 6 cups of fuel, and the maker rates one fill at 2 to 2-1/2 hours of smoke. Fuel is wood chips or chunks; the maker states wood pellets are not recommended. The unit can be refilled at any time during smoking without relighting or opening the smoker, which matters on a tall cabinet where opening the door dumps the heat and smoke from the whole column.

Mounting is the commitment: the outlet tube inserts through a 1-1/8 inch hole drilled in the smoker wall, with the smoke outlet above the fuel source and a removable end cap for cleaning. Air comes from a high output adjustable airflow electric pump, offered in a 110V version for the US and Canada or without a pump. The maker lists cold smoking at temperatures under 100 degrees and hot smoking as well, a lifetime warranty on the unit, and a 3-year warranty on the air pump.

Pros: maker rates it for vertical smokers and six cubic feet and up; refill without opening the cabinet; chips or chunks; lifetime warranty on the unit. Cons: needs a drilled hole; pellets not recommended; pump is a separate option. Buy if your vertical cabinet is large and you smoke often. Skip if you cannot drill the cabinet wall.

Smoke Daddy 8 Inch Cold Smoke Generator

The 8 Inch is the smaller Smoke Daddy: a heavy gauge 2-1/2 inch SCH 40 6061 precision machined aluminum body for smaller grills and medium size smokers, per the maker page. Its description gives up to 1 hour of smoke on a single load of small wood chips or chunks, with wood pellets not used in this design.

The maker’s page prints two fuel figures for this unit: the description text says it holds 2 cups of fuel, while the specification bullet lists the assembled dimensions as 12 by 2-1/2 inches and the hold as 1-1/2 cups of fuel. Both figures are the maker’s own, printed on the same page, and a buyer should expect the smaller figure when measuring a load. The design shares the line’s back draft layout, with the smoke outlet tube above the fuel and a removable end cap.

Like the Magnum, it can be refilled at any time during the smoke without relighting or opening the smoker, and it mounts through a 1-1/8 inch drilled hole with the same high output adjustable pump offered as an option. The maker lists smoke at temperatures below 100 degrees and hot smoking as well, with a lifetime warranty on the unit and 3 years on the pump. For a medium vertical cabinet that needs an hour of smoke at a time for cheese, nuts or a smoke finish, the smaller body is the fit.

Pros: compact body for medium smokers; refill mid-smoke without opening the cabinet; chips or chunks; lifetime warranty on the unit. Cons: about 1 hour per load; maker prints two capacity figures; needs a drilled hole. Buy if your vertical smoker is medium sized and your smokes are short. Skip if you need multi-hour burns per fill.

A-MAZE-N 18 In. Stainless Steel Expandable Wood Pellet Grill Tube Smoker

The expandable tube is the in-chamber option: a stainless steel pellet tube that adjusts from 12 to 18 inches, listed as providing smoke for up to 6 hours at the long setting, during cold smoking and hot smoking at temperatures up to 325 degrees F. The listing states it works with gas grills, charcoal grills, pellet grills,.

Electric smokers and gas smokers, and smokes meats, cheeses, fish and nuts.

The maker’s manual gives the fuel figures behind the listing’s hours: the expandable tube at 12 inches holds 12 ounces of pellets for about 4 hours, and at 18 inches holds 18 ounces for about 6 hours. In a vertical smoker the tube lies on a lower grate or the floor of the cabinet, under the food racks, where its smoke-only output rises through the column. Length is the adjustment: run it short for a small load, long for an overnight brisket in a tall cabinet.

No drilling, no pump and no power are needed, which makes this the pick for rented, borrowed or warranty-sensitive vertical smokers that cannot be modified. The limits are the shared ones for in-chamber tubes: it takes grate or floor space inside the cabinet, and refilling means opening the door and handling a hot tube. The manual also notes its smoke times are approximate, based on low and slow cooking.

Pros: no cabinet modification; adjustable 12 to 18 inches; up to about 6 hours; pellet fuel. Cons: sits inside the cabinet; hot to refill; times approximate. Buy if you want generator output without drilling your vertical smoker. Skip if your cabinet floor is fully used by a water pan and drip tray.

Bradley Smoker Cold Smoke Adapter (BCOLD)

The Bradley adapter is a different kind of pick: not a burner, but the maker’s kit for turning a Bradley vertical tower into a cold smoker. The listing describes a cold smoke adapter with an aluminum tube in black, and the maker description states it attaches between the smoke tower and the generator with a flexible aluminum tube that lets the.

Smoke cool down before it reaches the food, enabling a true cold smoke.

The kit fits onto all Bradley Smoker models, per the maker description. The box is powder coated steel, the tube is aluminum at 36 inches long extended, and the kit includes the cold smoke box, the flexible aluminum tube, an adaptor plate, and a bypass plug for digital smokers. Listed dimensions are 43.18 by 27.94 by 30.48 cm, at 4.54 kg, and the minimum temperature is subject to ambient conditions, since the cooling depends on the air around the tube.

For a Bradley owner this is the only pick that uses the smoker’s own generator and bisquette feed, so the smoke flavor and feed system stay the same while the heat stays outside. The limit is obvious: it does nothing for any other brand, and it adds no smoke on its own. Judged as a smoke generator solution for vertical smokers, though, a Bradley tower plus this kit is a complete cold-smoke setup, which is why it closes this list.

Pros: fits all Bradley models; uses the smoker’s own generator and feed; 36-inch tube cools the smoke path; complete kit in the box. Cons: Bradley only; produces no smoke by itself; cold smoking depends on ambient temperature. Buy if you own a Bradley tower and want to cold smoke. Skip for any other brand of vertical smoker.

Buying guide

A smoke generator for vertical smokers is chosen by cabinet brand first, then by mounting, fuel and burn time. A tall cabinet rewards a generator that can be refilled without opening the door, because a vertical column holds a lot of heat and smoke that escape at once.

Start with your cabinet brand

Two of the five picks are brand-locked. The Masterbuilt Slow Smoker fits Masterbuilt Digital Electric Smokers, with the manual excluding the MES 400 Series or above, and the Bradley adapter fits all Bradley models and nothing else. If your vertical smoker is one of those brands, the matched attachment is usually the cleanest answer,.

Because the fit, the smoke path and the controls were designed together.

If your cabinet is another brand, or a charcoal or propane vertical, the choice narrows to the universal picks: the Smoke Daddy units that mount through a drilled hole, or the expandable tube that sits inside. Check your manual before drilling; some makers treat a drilled cabinet as a modified product.

External mounting versus in-chamber tubes

External generators keep their heat outside the cabinet and feed smoke in through a tube or fitting. That separation is what makes true cold smoking possible in a tall cabinet, and it allows refills without opening the door: both Smoke Daddy pages state the units can be refilled at any time during smoking without relighting or opening the smoker.

The Masterbuilt unit hangs on the smoker as an accessory, and the Bradley kit moves the generator off the tower entirely.

In-chamber tubes are simpler and need no modification, but their heat adds to the cabinet and their refills cost you a door opening. In a vertical smoker, place a tube low, under the lowest food rack, so the smoke rises through the whole column instead of pooling at one level.

Fuel for a smoke generator for vertical smokers

The external units here burn chips or chunks: the Masterbuilt takes dry, un-soaked chips only and the manual bars chunks, while the Smoke Daddy units take small chips or chunks and do not recommend pellets. The expandable tube burns pellets, which meter out slowly and evenly and come in many wood types in small bags.

Fuel choice also sets your refill rhythm. Chips burn faster and hotter per load, chunks last longer in the Smoke Daddy bodies, and pellets in a tube give the steadiest unattended burn of the three. Match the fuel to the session: an hour of cheese smoke needs little, an overnight bacon cure needs the longest, steadiest source you can fit.

Burn time and refilling

Printed burn times here run from about 1 hour for the 8 Inch Smoke Daddy to up to 6 hours for the Masterbuilt Slow Smoker and the extended tube. The Magnum P.I.G. sits in the middle at 2 to 2-1/2 hours per 6-cup fill, but its refill-without-opening design means a long session is a series of quick top-ups rather than one long burn.

Plan the session before you light anything: total smoke hours wanted, how often you are willing to open or refill, and whether the food needs continuous smoke or only the first hours. Many vertical-smoker cooks take smoke early and finish on heat alone, which makes a mid-length generator with easy refills more useful than the longest single burn.

Cold smoking in a tall cabinet

Cold smoking in a vertical cabinet has one advantage: height. Smoke introduced at the bottom cools as it rises, and the Bradley kit uses distance itself, a 36-inch tube, as the cooling method. The Smoke Daddy pages put their cold smoking at temperatures under 100 degrees, and the Masterbuilt unit is described by its maker as ideal for cheese,.

Fish, bacon and jerky, the classic cold and low smoke foods.

The rules from the small-smoker guide apply here too: cure fish and pork with a tested recipe before cold smoking, cook bacon and sausages afterwards, and keep the cabinet cool. A tall cabinet in summer sun can pass 100 degrees with no fire at all, so shade and evening sessions matter as much as the generator you choose.

FAQ

Answers on fit, drilling and burn time for tall cabinets, drawn from the listing, maker and manual pages opened for the five picks. Compatibility wording is quoted from the makers, including where a manual narrows a listing’s claim. Compatibility wording follows the makers’ own pages.

Does the Masterbuilt Slow Smoker fit every Masterbuilt?

The listing states it is compatible with all Masterbuilt Digital Electric Smokers. The maker’s manual for the unit adds an exception: it fits Masterbuilt Digital Electric Smokers with the exception of the MES 400 Series or above. If you own one of the largest models, go by the manual and check with the maker before ordering.

For the rest of the digital electric line, the unit is the brand’s own attachment, uses dry wood chips, and is rated by the maker for up to 6 hours of continuous smoke. It does not cook; the manual states the slow smoker is a smoke generating accessory for use with Masterbuilt smokers.

Do I have to drill my smoker for a Smoke Daddy?

Yes, for the two Smoke Daddy picks. Both maker pages describe mounting by drilling a 1-1/8 inch hole and inserting the smoke outlet tube. That is a permanent change to the cabinet wall, so it suits an owned, out-of-warranty smoker you plan to keep. The pump then pushes smoke through the tube, and the end cap removes for cleaning.

If drilling is out, the expandable A-MAZE-N tube gives up to about 6 hours of pellet smoke from inside the cabinet with no modification, and brand-matched attachments like the Masterbuilt and Bradley units mount as accessories. Choose the mounting style before the model.

Why is the Bradley adapter in a generator list?

Because for a Bradley tower it completes the cold-smoke job: the smoker’s own generator makes the smoke, and the adapter’s 36-inch aluminum tube cools that smoke before it reaches the food, which the maker describes as enabling a true cold smoke. Without the adapter, the generator’s heat enters the cabinet with the smoke.

It is listed last and flagged clearly as brand-specific and not a burner, so no reader mistakes it for a universal generator. For any other brand it is not an option at all; the Smoke Daddy units or the expandable tube cover those cabinets.

Which pick gives the longest smoke?

On printed figures, two picks reach about 6 hours: the Masterbuilt Slow Smoker, rated for continuous smoke for up to 6 hours, and the expandable tube at its 18-inch setting, rated by the manual at about 6 hours on 18 ounces of pellets. The Magnum P.I.G.

runs 2 to 2-1/2 hours per fill but refills without opening the smoker, so its session length is effectively open-ended.

The 8 Inch Smoke Daddy runs up to about 1 hour per load. All figures are maker ratings; the A-MAZE-N manual states its times are approximate and based on low and slow cooking, and real times move with fuel, airflow and weather.

Can these generators hot smoke too?

Some can. The Smoke Daddy pages state their units work for cold smoking at temperatures under 100 degrees and for hot smoking as well, and the A-MAZE-N listing rates its tube for cold and hot smoking at temperatures up to 325 degrees F. In hot smoking the smoker itself usually makes plenty of smoke,.

So a generator’s role shifts to adding a specific wood flavor or covering a pellet smoker’s light smoke at high heat.

The Masterbuilt Slow Smoker and the Bradley adapter are aimed at the cool end: slow, cold and low-temperature smoke for cheese, fish, bacon and jerky. Match the generator’s temperature range to the cooking you actually do, not the widest claim on the page.

Conclusion

Masterbuilt and Bradley owners have brand-matched answers in the Slow Smoker and the cold smoke adapter. Everyone else chooses between the Smoke Daddy pump units, which refill without opening the cabinet, and the expandable tube, which needs no drilling. Match the mounting to your cabinet first, then the burn time to your longest session.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.