Updated Nov 16, 2026· 15 min read

Key takeaways

  • Six top briquettes for gas grills compared on format, coverage and fit, from loose ceramic briquettes and lava rock to model-specific briquette and rod trays.

Briquettes sit between a gas grill’s burners and its grate, soaking up flame and radiating it back as even heat. This guide compares briquettes for gas grills across the formats on sale, including loose ceramic briquettes, lava rock, and the fitted trays and rod systems the luxury grill makers build for their own models.

Quick verdict

The GrillPro 60-pack is the universal pick: loose ceramic briquettes that cover up to 300 square inches of diffuser bed in a grill designed for them. Coyote owners should take the Coyote briquette tray made for their model. The Mr. Bar-B-Q lava rock is the traditional fill for grills built around a rock bed.

Product Format Best for Key spec Main limit
GrillPro Ceramic Briquettes Loose ceramic, 60 per bag Universal diffuser beds Covers up to 300 sq in, about 2 in each Only for grills designed for a briquette bed
Coyote Ceramic Briquette Trays Fitted stainless trays Coyote grill owners 304 stainless tray, sizes 28 to 50 in Fits Coyote models only
Lynx Briquette Tray Assemblies Tray, briquettes and clips Lynx grill owners Sold as tray only or full assembly Fit depends on model and series
DCS Ceramic Rod Trays Ceramic rods in trays DCS grill owners Rods lock into radiant trays by bracket Genuine DCS system parts only
Mr. Bar-B-Q Natural Lava Rock Loose volcanic rock, 7 lb Grills built for a rock bed Natural lava rock, 7 lb bag Rock absorbs grease and needs replacing
Thermador PABRICKW Flat ceramic bricks Thermador Pro Grill owners Flat format, 27 lb pack Maker publishes no coverage figure

How we selected

Every product here was taken from a page opened for this article, and every one states gas-grill use. The list is built to show the real shape of this market: two universal fills that suit any grill designed for a diffuser bed, and four maker systems built for specific grills, because a large share of briquette heat management happens inside brand-specific trays rather than in universal bags.

One rule runs through the whole guide and matters more than any product choice: briquettes and lava rock belong only in grills designed for them, or as the grill maker’s own replacement parts. A major maker’s manual, quoted in the buying guide below, warns that adding aftermarket rock or briquettes to a flame-tamer grill causes poor combustion and voids the warranty. Fit first, format second.

Claims are attributed the way the makers make them. Where a brand says its tray retains heat better than a flame tamer or cuts flare-ups, the article reports that as the maker’s claim, and the specs that can be checked, including counts, coverage and tray sizes, are the ones stated plainly.

The six briquettes for gas grills, in detail

The six products below split into loose fills and fitted systems. Loose briquettes and lava rock are measured by count, coverage and weight; trays and rods are measured by which grill they fit. Each entry gives the published figures and the limits, so you can match the format to the diffuser bed your grill was built with.

GrillPro Ceramic Briquettes

The GrillPro bag is the standard universal format: 60 ceramic briquettes, each roughly 2 inches across, which the maker says cover up to 300 square inches and suit most full-sized gas grills. They are a loose fill, spread in a single layer over the diffuser rack or tray your grill provides, where the maker describes them as a protective buffer between the burner flames and the food.

The working claims are the classic ceramic ones, stated in the maker’s copy: the briquettes absorb heat from the burners and redistribute it evenly across the cooking surface, and they are self-cleaning in the simple sense that you flip them over and let the heat burn off the underside. The same copy positions them as a replacement for lava rock in grills that are ready for a change of medium.

Two cautions apply. First, the 300 square inch coverage is a maker’s maximum for a single layer, so a large grill may need a second bag to avoid gaps. Second, universal fit describes the bed size, not permission: a grill designed around flame tamers is not a candidate, whatever the bag says. In a grill built for briquettes, though, this is the straightforward refresh when the old set has cracked or soaked through.

  • Pros: 60-count bag covers up to 300 sq in; simple flip-to-clean upkeep; fits most full-sized briquette beds; widely stocked format.
  • Cons: large grills may need two bags; no fitment list by model; loose fill shifts if the bed is not level.

Buy if your grill was built for loose briquettes and the current set is cracked, crumbling or grease-soaked. Skip if your grill uses flame tamers or heat plates, because no universal bag is made for that firebox.

Coyote Ceramic Briquette Trays

Coyote sells the briquette layer as a finished tray: a 304 grade stainless steel tray filled with ceramic pieces shaped like charcoal briquettes, sized to drop into specific Coyote grills. The maker positions the tray as a direct replacement for the stainless steel flame tamers its grills ship with, which makes this an upgrade path the grill’s own brand sanctions rather than an aftermarket experiment.

The range is organized by grill size and model: trays are listed for 28, 34, 36, 42 and 50 inch Coyote grills, with separate SKUs for the C1 and C2 generations at the same widths, so the model code matters as much as the width. Coyote’s claims for the system are heat retention and distribution superior to its regular flame tamers, plus a reduced risk of flare-ups, because the ceramic bed catches and vaporizes drippings before they reach open flame.

Because the tray is a fitted part, the buying work is identification, not measurement: confirm your grill’s model code, match the SKU, and the tray drops into the space the flame tamer occupied. The trade is scope. These trays fit Coyote grills and nothing else, and a fitted tray is a bigger purchase than a bag of loose briquettes, which is the usual trade for a part that fits exactly.

  • Pros: factory upgrade over flame tamers; 304 stainless tray; sized by model from 28 to 50 inches; no loose pieces to arrange.
  • Cons: Coyote fit only; C1 and C2 generations use different SKUs; higher outlay than loose fill.

Buy if you own a Coyote grill on flame tamers and want the brand’s own briquette system. Skip if your grill is another brand, because the tray dimensions and mounting are Coyote-specific.

Lynx Briquette Tray Assemblies

Lynx builds its gas grills around a ceramic briquette tray system, and the replacement market for it shows how the system wears. A specialist parts source for the brand explains that owners can buy the briquette tray on its own, or a complete assembly that includes the tray, the ceramic briquettes and the clips that hold the briquettes in place, which is the difference between refreshing the ceramics and rebuilding the whole layer.

The same source is blunt about lifespan: the trays sit directly above the flame and take the drippings, so briquettes crack and trays degrade, and the briquette layer is among the earlier parts of a Lynx grill to need replacement. Care guidance is specific to ceramic: brush off build-up, and keep water and chemicals off the briquettes, because both speed the breakdown of the ceramic.

Fitment is the work here. Lynx parts are matched by model number and series, and the same model name can hide different tray designs across production runs, so the serial information matters before ordering. For a Lynx owner, though, this is the correct way to restore the grill’s heat layer: the maker’s tray, the maker’s briquettes, held by the maker’s clips, rather than a universal substitute in a system that was never designed for one.

  • Pros: genuine system parts; tray-only or full assembly options; clips included in assemblies; restores the factory heat layer.
  • Cons: fit varies by series as well as model; assemblies run higher than loose briquettes; clips are fiddly to refit.

Buy if your Lynx grill’s briquettes are cracked or its tray is warped and you want the factory layer back. Skip if you are shopping for a different brand, because nothing in this system is dimensioned for other grills.

DCS Ceramic Rod Trays

DCS takes the same job and changes the geometry: instead of briquettes, its gas grills run a layer of ceramic rods. The maker’s installation guide for the current Series 7 Professional grills lists radiant tray ceramic rods among the supplied components, and its steps are precise: place the ceramic rods into the radiant trays, lock the rods in place by pushing the side bracket into place, and set the trays on their pins above the burners.

Two details in that guide tell you how the system is meant to work. The trays sit over heat deflectors that must be secure beneath them, and the finished tray should keep a slight slope down toward the front of the grill, which is the drainage angle for grease. The rod format gives a continuous radiant surface with no gaps for drippings to fall straight through to the burners.

Replacement runs through the maker’s own parts channel, and the guide directs owners to order parts from the DCS site. That closed loop is the theme of the luxury entries in this list: the radiant layer is a designed component of the grill, rods and tray together, and it is serviced with genuine parts matched to the model rather than with bulk ceramic from a bag.

  • Pros: continuous rod surface with no gaps; locking bracket keeps rods seated; factory parts channel; sloped tray aids drainage.
  • Cons: DCS models only; rods are individual parts to handle with care; no universal sizing.

Buy if you own a DCS grill and a rod is cracked or a tray is tired, and you want the radiant layer restored to factory form. Skip if you are converting another grill, because the tray, pins and brackets are DCS hardware.

Mr. Bar-B-Q Natural Lava Rock

Lava rock is the original gas grill diffuser, and this is its standard retail form: a 7 pound bag of natural volcanic rock from Mr. Bar-B-Q, model 05002. The maker’s description is brief and accurate about the job: the rock is a way to make sure you are evenly distributing heat in your gas grill, so food cooks more evenly across the grate.

The rock goes into grills designed for a rock bed, spread in a layer over the rock grate above the burners. Porous volcanic rock soaks up heat and drippings alike; the drippings vaporize on the hot surface, which is where the traditional flavor argument for lava rock comes from. The same porosity is the upkeep story: over time the rock saturates, crumbles and starts to hold old grease, and the fix is a fresh bag rather than a cleaning method.

Keep the categories straight when ordering from this brand: the same maker sells ceramic briquettes under a different model number, and the two fills suit different beds and habits. Lava rock is the lower-effort, traditional fill for a grill built around it, and the 7 pound bag is sized for a typical full-size firebox layer.

  • Pros: natural volcanic rock; simple 7 lb bag sized for a standard layer; the traditional diffuser for rock-bed grills; easy to top up.
  • Cons: saturates with grease over time and needs periodic replacement; irregular pieces leave small gaps; not for flame-tamer grills.

Buy if your grill was built for a lava rock bed and the current rock is saturated or breaking down. Skip if you want the longer service intervals of ceramic, or if your grill manual names flame tamers as its diffuser.

Thermador Flat Ceramic Briquettes PABRICKW

Thermador’s entry changes the shape rather than the material: flat ceramic briquettes, sold as a maker accessory for its Pro Grill line under the SKU PABRICKW. Where the common briquette is a small pyramid, these are flat bricks, a format that tiles a diffuser bed in a continuous layer and matches the flat trays used in the maker’s own outdoor grills.

The published data is spare, and this entry reports it as it stands: the spec sheet gives the product name, the SKU and a net weight of 27 pounds for the pack, with no coverage figure and no count. That weight alone says this is a full bed replacement for a large grill rather than a top-up bag, and fit is by the maker’s own grill line rather than by universal bed size.

For a Thermador Pro Grill owner, the point is the same as with the other maker systems here: the diffuser the grill was designed around, in the format the trays were built to hold. For anyone else, the flat format is a reminder to check shape as well as size, because a bed built for flat bricks and a bed built for pyramids do not interchange cleanly even at the same coverage.

  • Pros: flat format tiles the bed without gaps; genuine maker accessory; 27 lb pack covers a full large bed.
  • Cons: no published coverage or count; Thermador Pro Grill fit only; minimal spec information.

Buy if your Thermador Pro Grill needs its briquette layer renewed with the maker’s own part. Skip if you need a stated coverage figure to plan a bed, because the maker does not publish one for this pack.

Buying guide

Choosing among briquettes for gas grills starts with your grill’s manual, not with the products. The checks below use the published figures from the product sections, including coverage, counts and tray sizes, and they begin with the compatibility rule that decides whether any product in this list belongs in your firebox at all.

First check: was your grill built for a diffuser bed?

Grills divide into two camps. One is designed around a bed of briquettes, lava rock or rods above the burners. The other is designed around flame tamers or heat plates, and its makers say so in writing: one major maker’s manual states that its grill was engineered for flame tamers, that adding aftermarket lava rock or briquettes of any type causes poor combustion and raises the chance of a grease fire, and that doing so voids the warranty. If your manual carries that section, none of the loose fills here are for your grill.

Ceramic, lava or rods: how the formats differ

Ceramic briquettes are the long-service loose fill: uniform pieces, even coverage, and a flip-to-clean routine. Lava rock is the traditional fill, porous and irregular, strong on heat soak and drippings flavor, shorter on service life before it saturates. Rods and fitted trays are maker systems that trade universality for an exact fit and a continuous surface. Match the format to the bed your grill already has rather than converting between them.

Sizing loose briquettes for gas grills by coverage

For loose fills, the working numbers are count and coverage. The GrillPro bag states 60 briquettes of about 2 inches covering up to 300 square inches, and the Mr. Bar-B-Q rock is sold by weight at 7 pounds. Measure your diffuser bed, length by width, and buy to cover it in one even layer with no bare patches and no stacking; a second bag for a large bed is normal, and gaps in the layer become hot spots on the grate.

When a tray system beats a bag

If your grill’s maker sells a briquette tray, as Coyote, Lynx and DCS do in different forms, the tray is usually the right purchase: it fits the firebox exactly, holds the ceramic in the designed pattern, and keeps the grill’s warranty story clean. Bags win on simplicity and availability for grills built around loose fill. The deciding question is what your grill shipped with, not which format sounds better in the abstract.

Upkeep and replacement timing

Every diffuser layer is a wear part. The Lynx parts guidance in the product sections describes briquettes cracking and trays degrading under drippings, and lava rock saturates until it holds grease instead of burning it off. Practical upkeep is light: brush loose debris off ceramic, flip loose briquettes to burn off the underside, keep water and chemicals off ceramic pieces, and replace any layer that has cracked, crumbled or started to smoke old grease at startup.

FAQ

These answers cover the questions buyers ask most about briquettes for gas grills, from fit and coverage to cleaning and replacement. Each answer sticks to the published figures in the product sections and to maker guidance quoted there, because the right answer depends on the diffuser system your grill was built with.

Can I put briquettes in any gas grill?

No. Briquettes and lava rock belong in grills designed for a diffuser bed, or as the grill maker’s own tray system. A grill designed around flame tamers should keep them: at least one major maker’s manual warns that adding aftermarket rock or briquettes causes poor combustion, raises the chance of a grease fire and voids the warranty. Read the lava rock and briquettes section of your manual before buying any fill.

How many briquettes does my grill need?

Work from coverage. The universal bag in this list states 60 briquettes covering up to 300 square inches in a single layer, so measure your bed and divide: a bed near 300 square inches takes one bag, and a larger bed takes two. The layer should be one piece deep and complete, because stacked briquettes heat unevenly and bare patches pass raw flame straight to the food.

Are briquettes for gas grills better than lava rock?

They are different rather than better. Ceramic briquettes are uniform, so coverage and heat spread are predictable, and they are cleaned by flipping and burning off. Lava rock is porous natural stone that soaks up drippings and heat, and many cooks like the flavor that gives, but it saturates and crumbles sooner. GrillPro’s own copy positions its ceramic as a replacement for lava rock, which sums up the trade: longer, tidier service against the traditional rock bed.

How do I clean ceramic briquettes?

Keep it dry and simple. The GrillPro copy describes its briquettes as self-cleaning when flipped, so the dirty side faces the burner and burns off. The Lynx parts guidance adds the caution for tray systems: brush off build-up, and do not use water or chemicals on the briquettes, because both speed the breakdown of the ceramic. Work only on a cool grill, and wear gloves, since used briquettes are greasy.

When should briquettes or lava rock be replaced?

Replace the layer when it stops doing its job evenly: briquettes cracked or crumbling, trays warped, rock saturated and smoking at startup, or hot and cold patches returning to the grate. The parts guidance quoted in this article counts the briquette layer as one of the earlier wear items on a grill, ahead of burners and grates, so a mid-life grill with tired ceramics usually needs a refresh rather than a repair.

Conclusion

For a grill built for loose fill, the GrillPro 60-pack is the briquette set to buy: 60 ceramic pieces covering up to 300 square inches with simple flip-to-clean upkeep. Coyote, Lynx, DCS and Thermador owners should renew the tray or rod system their grill shipped with, and rock-bed grills take the Mr. Bar-B-Q lava rock.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.