Key takeaways
- Five stain-blocking paints and primers for smokers' homes compared on printed base, coverage and dry time, with a buying guide and FAQ notes for stained walls.
The right paint to use for smokers is a stain-blocking primer-sealer, not a standard wall paint: each pick below is a coating whose own printed material names smoke or nicotine stains. The five are compared on base, coverage, dry time and the exact stain wording on the can, so a yellowed bedroom and a smoke-filmed ceiling get different answers.
Quick verdict
Short on time? Zinsser B-I-N is the heavy-duty pick: a shellac-based primer whose printed text names nicotine and smoke stains and tobacco odors, at about 500 square feet per gallon. Sherwin-Williams Extreme Block Waterbased is the water-based option, with printed coverage of 350 to 400 square feet per gallon and a 24-hour stain-sealer recoat.
The five picks split by base, and the base is the decision. One is shellac, two are oil-based alkyd formulas, and two are water-based, and each maker’s own words route different stains to different bases: one maker’s directions send smoke stains to its shellac primer and nicotine stains to its oil-based primer. Odor appears in the printed material in two different ways, as tobacco odor the coating seals in, and as low paint odor while the room is being painted, and the sections below keep those two meanings separate. Every figure in the table is printed by the maker or on the product data sheet: base, coverage, touch and recoat times, and the stain list each product claims for itself.
| Product | Base as printed | Stain wording as printed | Coverage as printed | Recoat as printed |
|---|---|---|---|---|
| Zinsser B-I-N Shellac-Based Primer | Shellac | Water, nicotine, ink, rust and smoke stains; nicotine stains and odors from tobacco | Approximately 500 sq ft per gallon | 45 minutes |
| Zinsser Cover Stain | Oil-based | Water, smoke and nicotine stains | Approximately 9.8 square metres per litre | Around 2 hours |
| Zinsser Odorless Oil-Based Interior Stain Blocker | Oil-based | Water stains, nicotine, crayon, marker, tannin, graffiti | 350 to 400 sq ft per gallon on nonporous surfaces | Not printed on the listing |
| Sherwin-Williams Extreme Block Waterbased Primer | Waterbased, styrene acrylic | Smoke, fire, nicotine, knots and tannin bleed | 350 to 400 sq ft per gallon | 1 hour as a primer; 24 hours as a stain sealer |
| Zinsser Bulls Eye 1-2-3 Plus | Water-based | Smoke and water damage, graffiti, rust, grease, wood tannin | Not printed on the listing page | 1 hour; 2 hours between stain-blocking coats |
How we selected
Selection started with the stain list printed for each product. A paint or primer stayed only if its own maker material or listing names smoke stains, nicotine stains, or both, because a general primer with no printed smoke or nicotine wording offers nothing to judge it on. That rule separates this list from a general primer roundup.
The maker’s own routing confirmed the shortlist. On one opened Zinsser page, the directions for a sibling water-based primer state that smoke stains should be primed with the shellac product and that nicotine stains should be primed with the oil-based product, which is why both of those coatings appear below with their own pages opened. Bases were then spread deliberately: shellac, oil and water are all represented, because the printed trade-offs differ by base, in cleanup, in dry time and in where the coating may be used. Figures were taken only as printed: coverage in square feet per gallon or square metres per litre exactly as each page states it, touch and recoat times from the same pages, and container sizes where a page prints them. Where a page does not print a figure, the table says so rather than borrowing the number from a different product in the same brand family.
- Maker or listing wording names smoke or nicotine stains in print
- Base printed on the page: shellac, oil-based or water-based
- Coverage figure printed, or its absence shown honestly in the table
- Touch and recoat times printed on the page or data sheet
- Interior and exterior limits printed, including spot-prime-only coatings
- Cleanup and tinting instructions printed where the page provides them
Five picks: the paint to use for smokers, base by base
The five products are ordered by base, from the shellac primer that makers route the worst stains to, through the two oil-based options, to the two water-based options that trade some blocking power for low odor and water cleanup. Each section sticks to what that product’s own page or data sheet prints.
Zinsser B-I-N Shellac-Based Primer
Zinsser B-I-N is the original shellac-based primer-sealer stain-killer, a formula the maker dates to 1946. Its printed stain-blocking text is the most direct here: one coat blocks stains including water, nicotine, ink, crayon, marker, rust and smoke stains so they will not bleed into the topcoat, with some stains requiring a second coat.
The same page recommends B-I-N for sealing nicotine stains and odors from tobacco, and for blocking stains and odors resulting from water and fire damage. Printed coverage is approximately 500 square feet per gallon, the highest figure here. Dry times are the fastest in the list: dries to the touch in 20 minutes, recoat in 45 minutes, with full adhesion and hardness after a cure of 1 to 3 days. The limits are printed just as clearly: it is an interior primer for all surfaces, with exterior use restricted to spot priming, and it is not recommended for whole-surface exterior work, floors or decks. Tinting is allowed up to 2 ounces of universal colorant per gallon, the product is not to be thinned, and cleanup is with denatured alcohol or ammoniated detergent. Any oil or latex paint can be applied over it.
- Base: shellac, white-pigmented
- Printed stain list: water, nicotine, ink, crayon, marker, rust, smoke
- Also printed: recommended for sealing nicotine stains and odors from tobacco
- Coverage: approximately 500 sq ft per gallon
- Dry: touch 20 minutes, recoat 45 minutes, cure 1 to 3 days
- Use: interior all surfaces; exterior spot priming only
Zinsser Cover Stain
Zinsser Cover Stain is the oil-based primer-sealer in this list, for interior and exterior applications. Its printed benefit list states that it seals water, smoke and nicotine stains, and the listing describes it as particularly useful for fire-, smoke- and water-damaged surfaces, including walls, ceilings, doors, cabinets and furniture.
Two printed details define its role. First, the routing: Zinsser’s own directions on a sibling product page state that nicotine stains should be primed with Cover Stain, which makes this the maker’s named answer to nicotine yellowing specifically. Second, the working figures: coverage of approximately 9.8 square metres per litre, and fast drying with recoating generally possible in around 2 hours. It also helps prevent cedar and redwood tannin bleed, works on wood, metal, masonry, vinyl and PVC, and can sit beneath oil-based or water-based topcoats. One coat is generally sufficient for priming most surfaces, with very porous surfaces possibly needing a second. The listing’s handling notes are those of a solvent-based oil primer: work in a well-ventilated area and keep the product away from heat, sparks and flames.
- Base: oil-based primer-sealer
- Printed stain list: water, smoke, nicotine
- Maker routing as printed: nicotine stains should be primed with Cover Stain
- Coverage: approximately 9.8 square metres per litre
- Recoat: around 2 hours
- Surfaces: wood, metal, masonry, vinyl, PVC; under oil or water topcoats
Zinsser Odorless Oil-Based Interior Stain Blocker
Zinsser Odorless Oil-Based Interior Stain Blocker is an oil-based primer sold in a 1-gallon can for interior work where oil-base performance is required but odor is a concern. Its printed description calls it an effective stainkiller that blocks water stains, nicotine, crayon, marker, tannin and graffiti.
Printed coverage is 350 to 400 square feet per gallon on nonporous surfaces. The finish description is unusual and useful in rented or quickly repainted rooms: bright white, non-yellowing, and it can be left unpainted, the only product in this list whose listing says that. It is printed for new or previously painted interior drywall, plaster, paneling, wood, stucco and metal, it seals porous surfaces so less topcoat is needed, and its high-adhesion formula is printed as suitable for glossy surfaces and textured or acoustic tile ceilings. It sands easily, which is why the listing also positions it as an enamel undercoater for doors, cabinets, trim and paneling. It is compatible with oil or latex topcoats, and application temperatures are printed as 40 to 90 degrees F. No recoat time is printed on the listing, so none is claimed here.
- Base: oil-based, interior only
- Printed stain list: water stains, nicotine, crayon, marker, tannin, graffiti
- Coverage: 350 to 400 sq ft per gallon on nonporous surfaces
- Finish as printed: bright white, non-yellowing, can be left unpainted
- Positioned as printed: for interiors where oil-base performance is required but odor is a concern
- Application temperatures as printed: 40 to 90 degrees F
Sherwin-Williams Extreme Block Interior/Exterior Stain Blocking Waterbased Primer
Sherwin-Williams Extreme Block Waterbased Primer is the water-based entry with the most complete printed data sheet in this guide. The maker describes its Stain Locking Technology as trapping stains like smoke, fire, nicotine and tannin bleed in the first coat, and pairs it with Odor Block Technology, described as blocking odors in the first coat.
The data sheet prints the full working set: coverage of 350 to 400 square feet per gallon, touch dry in 30 minutes, recoat in 1 hour when used as a primer and 24 hours when used as a stain sealer, a finish printed as 12 to 20 units at 85 degrees, volume solids of 38 percent plus or minus 2, and VOC content of less than 50 grams per litre. The vehicle is printed as styrene acrylic, the colour as Extra White, and container sizes as 1 quart, 1 gallon and 5 gallon. Surfaces printed include ceiling tiles, paneling, wall laminate, cedar, cured plaster, drywall, wood, cured masonry and previously painted surfaces, for interior and exterior use, with two printed limits: exterior work must be topcoated within 14 days, and the primer is not for floors. The sheet also prints a test method for stained areas: prime, allow 24 hours, apply topcoat to a small area to check for bleeding, and add a second coat if the stain shows through.
- Base: waterbased, styrene acrylic vehicle
- Printed stain list: smoke, fire, nicotine, knots, tannin bleed
- Named technologies as printed: Stain Locking Technology, Odor Block Technology
- Coverage: 350 to 400 sq ft per gallon
- Dry: touch 30 minutes; recoat 1 hour as primer, 24 hours as stain sealer
- VOC as printed: less than 50 grams per litre
Zinsser Bulls Eye 1-2-3 Plus
Zinsser Bulls Eye 1-2-3 Plus is an advanced water-based stain killer, primer and sealer for interior and exterior surfaces. Its printed feature list says it blocks smoke damage and graffiti, and effectively covers smoke and water damage, graffiti, rust, grease and wood tannin, which puts smoke in its own wording twice.
The working figures printed for it: touch dry in 30 minutes and re-coatable in 1 hour, with 2 hours between interior stain-blocking coats and an overnight wait for exterior stain blocking, and full cure in 7 days. One coat is the printed norm, with a second coat on very porous surfaces or heavy staining. It is printed as low odour and low VOC, and it contains a biocide that protects the dried film against fungi, mould and mildew, which is why the listing suggests it for high-humidity areas such as bathrooms and laundry rooms. Adhesion is printed as excellent without sanding, across wood, MDF, plaster, concrete, glass, tile and metal, and the formula is alkali resistant to 12.5 pH. Pack sizes on the listing are 1 litre, 2.5 litres and 5 litres. No coverage figure is printed on the listing page, so none is given here.
- Base: water-based
- Printed stain list: smoke and water damage, graffiti, rust, grease, wood tannin
- Dry: touch 30 minutes, recoat 1 hour; 2 hours between stain-blocking coats
- Full cure as printed: 7 days
- Printed extras: low odour, low VOC, biocide against fungi, mould and mildew
- Pack sizes as printed: 1 litre, 2.5 litres, 5 litres
Buying guide
A stained room fails in set ways: the yellow outline of a picture frame bleeds through a coat, the ceiling film prints through, or the room still smells of tobacco after the walls look clean. The decision is which printed stain list matches the stain in front of you, and the sections below work through that match using only what the makers print.
Shellac, oil or water: the base decides the stain work
The three bases in this guide are not interchangeable, and the makers say so in their own routing. The shellac primer, B-I-N, carries the broadest printed stain list here and the explicit recommendation for sealing nicotine stains and odors from tobacco, at the cost of solvent cleanup with denatured alcohol and exterior use limited to spot priming.
The oil-based pair split the work between them. Cover Stain is the maker’s routed answer to nicotine stains and adds exterior use, at approximately 9.8 square metres per litre. The Odorless stain blocker keeps oil-base blocking for interior rooms where the paint’s own odor is the problem, and adds the printed option of leaving the bright white finish unpainted. The water-based pair trades the solvent bases for water cleanup and low odor: Extreme Block prints the fullest data sheet and a named odor technology, while Bulls Eye 1-2-3 Plus prints the broadest surface list, including glass and tile, and a biocide for humid rooms. Choose the base by the stain and the room, then check the figures that base prints.
Matching the paint to use for smokers to the stain
Start from the stain, not the brand. Nicotine yellowing on walls and ceilings is the stain two makers name directly: the shellac page recommends its product for sealing nicotine stains, and the sibling directions route nicotine stains to the oil-based Cover Stain, so either base has a printed claim on this stain.
Smoke film and fire damage are named most broadly by the shellac primer, which prints smoke stains and stains and odors from water and fire damage, and by Extreme Block, which prints smoke and fire in its first-coat list. Tobacco odor that lingers after cleaning is a separate problem: the shellac page prints odors from tobacco, and Extreme Block prints a named Odor Block Technology, while the Odorless product’s printed odor benefit runs the other way, less smell from the paint itself during the job. Light, even staining with no odor problem is where the water-based options fit, and heavy staining is where the printed second-coat instructions in the next section matter more than the brand on the can.
Coverage and coat counts on stained walls
Printed coverage decides how many gallons the room takes, and the figures here span a real range: approximately 500 square feet per gallon for the shellac primer, 350 to 400 for both the Odorless blocker and Extreme Block, approximately 9.8 square metres per litre for Cover Stain, and no printed figure at all for Bulls Eye 1-2-3 Plus.
Coat counts are printed with equal care, and they qualify the coverage figures. B-I-N prints one coat as effective, with some stains requiring a second coat. Bulls Eye 1-2-3 Plus prints one coat as the norm and a second for very porous surfaces or heavy staining. Extreme Block prints the most useful procedure of the five: after priming stained areas, allow 24 hours, test the topcoat on a small area for bleeding, and apply a second coat if the stain bleeds through. Budget the second gallon for stained rooms: a printed one-coat claim is a starting point, and the makers themselves print the exceptions.
Dry times, recoat windows and cleanup
Recoat windows decide how fast a room returns to use, and the printed spread is wide. The shellac primer recoats in 45 minutes and touches dry in 20. The water-based pair touch dry in 30 minutes and recoat in 1 hour, while Bulls Eye 1-2-3 Plus asks 2 hours between stain-blocking coats and Extreme Block asks 24 hours as a stain sealer.
Cover Stain recoats in around 2 hours, and no recoat figure is printed for the Odorless blocker. Cleanup follows the base: denatured alcohol or ammoniated detergent for the shellac primer, and soap and warm water for Extreme Block, per its data sheet. Ventilation is printed on the solvent side: the Cover Stain listing calls for a well-ventilated area away from heat and flames, and the shellac page prints respirator and ventilation guidance for application. Full cure matters for the final judgement of a stain job: the shellac film develops full adhesion and hardness in 1 to 3 days, and Bulls Eye 1-2-3 Plus prints a 7-day full cure, so a stain that looks covered on day one deserves a second look a week later.
Prep decides whether the stain stays buried
Every page here prints the same prep spine: surfaces must be clean, dry and sound, with loose or peeling paint removed and glossy surfaces dulled where the maker asks for it. The shellac page adds washing with a household ammonia solution for dirty surfaces and a printed warning about lead dust when sanding or scraping old paint.
Two printed details are easy to skip and costly to miss. The shellac primer is not to be thinned and prints an application range of 0 to 90 degrees F with relative humidity below 70 percent, while Extreme Block prints application above 40 degrees F and no reduction. Bulls Eye 1-2-3 Plus prints a narrower window, 10 to 25 degrees C with humidity no more than 85 percent, and thinning of up to 5 percent water for spray application only. None of the five is a floor coating: the shellac and the Sherwin-Williams primers both print that limit. Prep and conditions are part of the product as printed, and a stain that bleeds through a badly prepped coat is a prep failure before it is a paint failure.
FAQ
These answers use only the printed facts from the five product pages and data sheet above: bases, stain lists, coverage figures, dry times and application limits. Where a page does not print an answer, the answer says so instead of guessing, and no answer turns a maker’s printed wording into a stronger claim.
How many coats of paint to use for smokers stains?
One coat is the printed starting point for three of the five, and the makers print the exceptions themselves. B-I-N states that one coat effectively blocks its listed stains, with some stains requiring a second coat, and Bulls Eye 1-2-3 Plus prints one coat as normal, with a second coat for very porous surfaces or heavy staining.
Extreme Block prints a test instead of a promise: prime the stained area, allow 24 hours, apply the topcoat to a small area, and add a second coat if bleeding shows. For a heavy nicotine or smoke stain, plan on the test and the possible second coat rather than on the one-coat headline.
Can these primers be left as the finished surface?
Only one listing says so. The Odorless Oil-Based Interior Stain Blocker is printed as bright white and non-yellowing, and its listing states it can be left unpainted, which suits ceilings and utility rooms where a flat white finish is the end goal anyway.
The others are printed as primers under a topcoat: B-I-N states that any oil or latex paint can be applied over it, Extreme Block requires exterior work to be topcoated within 14 days, and Cover Stain is printed for use under oil-based or water-based topcoats. Treating a primer as the finish where the maker prints a topcoat step is a shortcut the pages do not support.
Which of these paints can be used outside?
Three of the five print exterior use, with different limits. Cover Stain is printed for interior and exterior applications, Extreme Block is an interior and exterior primer with exterior work topcoated within 14 days, and Bulls Eye 1-2-3 Plus prints interior and exterior use, with an overnight wait between exterior stain-blocking coats.
The other two are restricted in print. B-I-N is limited to spot priming on exteriors and is not recommended for whole-surface exterior application, and the Odorless blocker is an interior product. None of the five is printed for floors or other horizontal surfaces.
What do the pages print about smell during and after painting?
The printed material separates two different smells. The smell of the room is addressed by B-I-N, which is recommended for sealing nicotine stains and odors from tobacco, and by Extreme Block, whose Odor Block Technology is described as blocking odors in the first coat.
The smell of the paint itself is addressed by the other two wordings: the Odorless blocker is positioned for interior work where oil-base performance is required but odor is a concern, and Bulls Eye 1-2-3 Plus is printed as low odour. The solvent-based listings print the working precautions that go with stronger paint odor: a well-ventilated area for Cover Stain, and respirator and ventilation guidance on the shellac page.
Can a stain-blocking primer be tinted toward the topcoat?
Two of the five print tinting allowances. B-I-N can be tinted with up to 2 ounces of universal colorant per gallon, and Extreme Block can be tinted with up to 4 ounces per gallon of the maker’s ColorCast Ecotoners, with the data sheet noting a P-shade for dark colours.
The other three pages do not print a tinting allowance, so none is claimed for them here. Tinting a primer toward the topcoat colour is a printed option on those two products only, and in both cases the allowance is small, enough to take the white edge off the primer coat rather than to replace the topcoat.
Conclusion
Match the base to the stain: shellac B-I-N for the broadest printed stain and tobacco-odor list, Cover Stain as the maker’s routed answer to nicotine, the Odorless blocker where paint odor matters, and the two water-based options for low odor and water cleanup. Print the test, allow the second coat, and the stain stays buried.