Updated Nov 16, 2026· 13 min read

Key takeaways

  • A fire protective mat for smokers guide covering five grill and deck mats, with sizes, materials and printed heat wording compared for each mat in the list.

A fire protective mat for smokers sits under the cooker and shields the deck or patio beneath it, and this guide compares five mats sold for that job, setting out the sizes, materials, and heat wording that each product page actually prints, including the three pages that print no temperature number at all.

What a fire protective mat for smokers sits under

A smoker runs for hours at a steady heat, drips grease, and drops embers when the firebox door opens. A protective mat is the layer placed on the deck, patio, or lawn before the cooker is rolled into position, so the surface underneath is covered for the whole cook rather than cleaned up after it.

The five mats in this guide split into two families. Three are deck and grill mats built mainly as surface protection: a vinyl mat, a Weber mat, and a PVC mat, each sized to sit under a grill or smoker and catch drips and stray heat. Two are fire pads built around heat reflection and flame barrier fabrics, sized to sit directly under grills, smokers, fire pits, and similar heat sources.

A smoker makes the mat question sharper than a grill does, because the cook lasts longer and the fire is tended through a door at ground level. Ash and embers leave the firebox at the front of the unit, grease renders for hours, and the cooker often sits in one spot for a whole season. The mat under it is therefore chosen by footprint, surface, and heat wording together, and those are the three threads this guide follows through all five products.

Heat wording needs care in this category, and this guide prints it exactly as the pages give it. Only one of the five pages states a numeric temperature figure, and that figure is the listing’s own wording. One fire pad states a percentage of heat reflected. The other three pages describe heat resistance in words only, and the guide says so at each entry rather than filling the gap with a number.

Two formats: flat deck mats and round fire pads

The format split runs through every comparison in this guide. The flat mats are rectangular sheets sized to cover the ground under and around a cooker, sold by length and width, and described mainly through the surfaces they protect and the drips they catch during a long cook.

The round fire pad works the other way around: it is sized by diameter, placed with a printed clearance under the heat source itself, and described through its fabric layers and the share of heat the maker says it reflects. A buyer who knows which of the two jobs needs doing, covering a deck or shielding the ground directly under a fire, can cut this list of five down to the right format before comparing sizes.

The five protective mats

Each entry below uses the size, material, and construction details printed on the product page that was opened for it. Where a page gives several sizes, the full printed range is listed, and where a page gives no temperature number, the entry notes that plainly so the comparison stays honest.

Diamond DeckPlate Grill Mats

The Diamond DeckPlate mat is a 100 percent premium vinyl mat with a diamond deck-plate textured surface, sold in sizes from 2 x 2 feet up to 3 x 5 feet, with custom widths available from 2 to 5 feet. The seller lists the item number as OGMDDP and offers it in Black, Gray, Clear, and a Black Yellow Border color option.

The page states the mat protects wood, brick, stone, slate, cement, and composite decking, and lists it as stain, fade, and mildew resistant, with hose-off cleaning. The seller copy describes it as engineered for extreme temperatures but prints no numeric temperature rating, so none is stated here. A limited lifetime warranty is listed on the page for this mat.

The custom width option is the detail that separates this mat from the other four. The fixed sizes top out at 3 x 5 feet, but the page offers custom widths from 2 to 5 feet, which lets the covered area be matched to a deck board run or a patio slab rather than to a standard rectangle. The diamond plate texture is the other printed feature: a raised tread pattern across the vinyl surface, in place of the smooth finish on the other flat mats in this guide.

The surface list is the other place this page goes further than most. Six surfaces are named, including slate, which no other page here mentions, and the resistance list runs to stain, fade, and mildew together. Combined with the lifetime warranty wording, the page presents this as the long-service option of the five: a mat bought once, hosed down after cooks, and left in place through the seasons.

  • Material: 100% premium vinyl, diamond deck-plate texture
  • Sizes: 2 x 2 ft up to 3 x 5 ft; custom widths 2-5 ft
  • Colors: Black, Gray, Clear, Black Yellow Border
  • Surfaces listed: wood, brick, stone, slate, cement, composite decking
  • Care: hose-off cleaning; stain, fade, mildew resistant
  • Item number: OGMDDP; limited lifetime warranty listed
  • Temperature rating: none printed on the page

Weber Floor Protection Mat

The Weber Floor Protection Mat appears in two opened listings. The standard mat, model 7696, is listed at 31.5 inches wide by 47.2 inches long with a thickness of 0.1 inches, in black, in a rectangle shape. A large version is listed at 180 cm by 100 cm for bigger cooking setups that need a wider covered area.

The large mat’s listing describes a durable material designed to withstand high heats, in weather resistant and anti-bacterial material, and recommends it for all Spirit, Genesis, and Summit models, plus SmokeFire, Pulse2000, Q3000, and Performer units. Neither listing prints a numeric temperature rating, so this guide records the heat wording as printed and adds no figure of its own.

The fit list is the useful detail on the Weber listings. SmokeFire appears in that printed list alongside the grill families, which is what puts this mat under a smoker as well as under the grills named beside it. The standard mat’s printed thickness of 0.1 inches also makes it the thinnest mat in this guide, against the Cuisinart mat’s quarter inch, which matters on a deck where the mat edge sits in a walking path.

The two sizes also bracket the range of the flat mats neatly. The standard mat at roughly 31 by 47 inches suits a single grill or a compact smoker, while the large mat at 180 by 100 centimeters covers a full cooking station with room for the cook to stand on the mat as well. The weather resistant wording on the large listing suits that bigger role, since a mat of that size is likely to live outdoors full time.

  • Model: 7696 (standard listing)
  • Standard size: 31.5 in W x 47.2 in L, 0.1 in thick, black, rectangle
  • Large size: 180 cm x 100 cm
  • Material wording: durable material designed to withstand high heats; weather resistant, anti-bacterial
  • Listed fit: Spirit, Genesis, Summit, SmokeFire, Pulse2000, Q3000, Performer
  • Temperature rating: none printed on either listing

Cuisinart Premium Deck and Grill Mat CGMT-300

The Cuisinart Premium Deck and Grill Mat, model CGMT-300, is listed at 65 inches long by 36 inches wide by 0.25 inches high, made from 100 percent PVC, with an item weight of 8.23 pounds. The listing states it fits most grills, smokers, and griddles, which puts smokers inside its printed fit list directly.

The surfaces named on the listing are wood, composite, and concrete, and cleaning is listed as a rinse-off job. At a quarter inch thick it is the thickest mat in this guide by the printed figures. The listing prints no numeric temperature rating for the CGMT-300.

At 65 inches long, this is also the longest single-piece rectangular mat in the guide after the largest UBeesize size, and its 8.23 pound printed weight is the only weight figure any of the five pages gives. That combination, a long rectangle with a stated weight and thickness, makes the CGMT-300 the most fully dimensioned of the flat mats here: length, width, height, and weight are all printed on one listing.

The fit wording is the broadest of the flat mats in one respect: grills, smokers, and griddles are all named, where the Weber page names cooker families and the Diamond DeckPlate page names surfaces instead. A household running a smoker beside a griddle can read this listing as covering both. The surface list is shorter than the Diamond DeckPlate list, three surfaces against six, so the trade between the two mats is fit breadth against surface breadth.

  • Model: CGMT-300
  • Size: 65 in L x 36 in W x 0.25 in H
  • Material: 100% PVC
  • Weight: 8.23 lb
  • Listed fit: most grills, smokers, and griddles
  • Surfaces listed: wood, composite, concrete
  • Care: rinse-off cleaning
  • Temperature rating: none printed on the listing

Newtex FirePad Deck Protector

The Newtex FirePad is a round deck protector built in two fabric layers: a Z-Flex fabric top layer and a Z-Block fabric bottom layer that the maker calls an impenetrable flame barrier. The maker copy states the pad reflects 95 percent of heat away from the ground, and it is sold in round sizes of 24, 30, and 36 inches.

The maker instructs placing the pad at least 6 inches under the heat source, and lists it for grills, barbecues, smokers, fire pits, camping stoves, and chimineas. The surfaces named are grass, wood, composite, concrete, brick, and stone, the widest surface list in this guide. The part number is printed as MPN 2200158-17001 and the pad is listed as made in the USA.

The two-layer build is what the FirePad page leads with, and it explains the heat claim the maker prints. The Z-Flex top layer faces the heat source, the Z-Block bottom layer faces the ground as the flame barrier, and the 95 percent reflection figure sits between them as the maker’s summary of the pair. No other page in this guide describes its construction in layers, which is why the FirePad reads as a heat product first and a deck product second.

The diameter steps are close together, 24, 30, and 36 inches, and the choice between them is governed by the maker’s own placement rule: the pad must extend at least 6 inches under the heat source, so the firebox or fire pit diameter plus that margin sets the size. Camping stoves and chimineas appear in the printed use list beside smokers, which makes this the only one of the five products whose page describes it traveling beyond the home deck.

  • Construction: Z-Flex fabric top layer, Z-Block fabric bottom layer
  • Heat wording: maker states it reflects 95% of heat away from the ground
  • Sizes: round 24 in, 30 in, 36 in
  • Placement: at least 6 inches under the heat source
  • Listed for: grills, barbecues, smokers, fire pits, camping stoves, chimineas
  • Surfaces listed: grass, wood, composite, concrete, brick, stone
  • MPN: 2200158-17001; made in USA

UBeesize Large Under Grill Mat

The UBeesize under grill mat is a fiberglass mat with a double-sided silicone coating, listed in sizes running from 15.75 x 13 inches up to the large 76 x 48 inch version, with the large mat’s product dimensions printed as 76 inches long by 48 inches wide by 0.15 inches high. A storage bag is included with the mat.

This is the one listing in the guide that prints a numeric heat figure: the listing states heat resistance up to 2000 degrees Fahrenheit, and that figure is recorded here as the listing’s own wording. The listing showed the mat in stock at the time of the crawl, with the size range covering small grills through large smokers.

The size range deserves a second look, because it spans two different jobs. The small sizes, starting at 15.75 x 13 inches, are hearth and stove sized pieces, while the run from 48 x 36 up to 76 x 48 inches covers the footprint of full-size grills and smokers with room to spare. The double-sided silicone coating over fiberglass is the printed construction across the range, and the included storage bag is listed with the large mat.

Double-sided is the construction detail to note here: the coating is printed on both faces of the fiberglass, so the mat can be laid either side up, unlike the layered FirePad, which has a printed top and bottom. At 0.15 inches, the large mat sits between the Weber standard mat and the Cuisinart mat on printed thickness, while covering more ground than either at its largest size.

  • Material: fiberglass with double-sided silicone coating
  • Heat wording: listing states heat resistance up to 2000 degrees Fahrenheit
  • Sizes: 15.75 x 13 in up to 76 x 48 in
  • Large mat dimensions: 76 in L x 48 in W x 0.15 in H
  • Included: storage bag

Side-by-side specifications

The table below collects the printed size, material, and heat wording for the five mats. The heat column repeats each page’s own phrasing, including the three entries where no numeric rating is printed, so the differences in how makers describe heat resistance stay visible at a glance.

Mat Size as printed Material Heat wording as printed
Diamond DeckPlate Grill Mats 2 x 2 ft to 3 x 5 ft, custom widths 2-5 ft 100% premium vinyl Engineered for extreme temperatures; no number printed
Weber Floor Protection Mat 31.5 x 47.2 in; large 180 x 100 cm Not named beyond durable, weather resistant material Designed to withstand high heats; no number printed
Cuisinart Premium Deck and Grill Mat CGMT-300 65 x 36 x 0.25 in 100% PVC No temperature wording printed
Newtex FirePad Deck Protector Round 24, 30, 36 in Z-Flex top fabric, Z-Block bottom fabric Reflects 95% of heat away from the ground
UBeesize Large Under Grill Mat Up to 76 x 48 x 0.15 in Fiberglass, double-sided silicone coating Heat resistance up to 2000 degrees Fahrenheit

Read as a group, the five pages show three different ways of talking about heat: a percentage reflected, a single numeric ceiling, and descriptive wording with no number at all. None of those phrasings converts into another, so the table keeps them separate instead of ranking the mats by a figure that only one page prints.

The material column shows a similar spread. Vinyl and PVC are the sheet materials of the flat mats, fiberglass with a silicone coating is the UBeesize construction, and the FirePad is the only fabric build, in two named layers. Thickness, where it is printed at all, runs from 0.1 inches on the Weber standard mat through 0.15 on the UBeesize to a quarter inch on the Cuisinart, and two of the five pages print no thickness figure, which is why the table leaves that detail to the individual entries above.

Choosing a fire protective mat for smokers by surface and fit

Once the heat wording is read as printed, the remaining choices are practical ones: which surface the mat will protect, how much covered area the cooker needs, and how the mat is cleaned and stored between cooks. The printed details above answer each of those questions for the five mats.

Start with the surface underneath

Every page names the surfaces its mat is listed for, and the lists differ. The Diamond DeckPlate page names wood, brick, stone, slate, cement, and composite decking. The Cuisinart listing names wood, composite, and concrete. The Newtex FirePad names the widest set: grass, wood, composite, concrete, brick, and stone.

Grass is the surface that narrows the field fastest, since only the FirePad page names it. A smoker that runs on a lawn or at a campsite pitch points to the round fire pad format, while a smoker that lives on a deck or patio can be matched against any of the five, using the printed surface list as the first filter.

Size the mat to the cooker footprint

The printed sizes run from the FirePad’s 24 inch round up to the UBeesize mat at 76 x 48 inches. A mat needs to extend past the cooker on the sides where the firebox door opens and where grease is most likely to land, so the footprint of the smoker, plus working room around it, is the measurement to compare against each printed size.

Shape matters alongside size. The FirePad is round and sized for a heat source centered on it, with the maker asking for at least 6 inches of pad under the source. The other four mats are rectangular deck mats, sized to run under the full length of a grill or smoker and the standing space in front of it.

Cleaning and storage between cooks

Two of the pages print their cleaning method directly: the Diamond DeckPlate mat is listed with hose-off cleaning, and the Cuisinart mat with rinse-off cleaning. Both point to mats that are washed down in place or at the edge of the patio rather than treated with cleaners, and the Diamond DeckPlate page adds stain, fade, and mildew resistance.

For storage, the UBeesize listing is the one that prints an accessory: a storage bag included with the mat. The Weber listings take a different approach to fit, naming the cooker families the mat is recommended for, which lets an owner match the mat to a Spirit, Genesis, Summit, SmokeFire, Pulse2000, Q3000, or Performer unit by name.

None of the five pages prints a cleaning or storage instruction beyond those points, and none prints a weight except the Cuisinart listing. Where a page is silent, this guide stays silent too: the entries record what is printed, the table compares what is printed, and the gaps are part of the comparison rather than a problem to be filled in from elsewhere.

Conclusion

Five mats cover the job with printed sizes from a 24 inch round fire pad to a 76 x 48 inch grill mat, in vinyl, PVC, fiberglass, and layered fabrics. Read the heat wording as each page prints it, match the surface list to your deck or lawn, and check the fit against the cooker footprint, and the right mat follows from those checks.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.