Updated Nov 17, 2026· 15 min read

Key takeaways

  • Compare the best AMD CPU water coolers for AM4 and AM5 Ryzen builds. Radiator size, fan speed, pump speed and socket support for all seven 360 mm AIO models.

An AMD Ryzen chip under load needs steady cooling, and a 360 mm all-in-one cooler moves heat away from the socket with a large radiator and three fans. The best AMD CPU water coolers pair AM4 and AM5 mounting with strong pumps and quiet fans, so this guide compares seven models to help you match a cooler to your case, your chip and your build.

Quick verdict

If you want one short answer, the ARCTIC Liquid Freezer III 360 stands out for its VRM fan and wide fan range, while the DeepCool LS720 SE suits builders who want high airflow from a simpler design. The table below lines up all seven coolers by type, best use, key specification and main limit, so you can narrow the field fast.

The ARCTIC model is the pick for most Ryzen builds because it cools the board around the socket as well as the chip. Builders who want a screen should look at the ASUS ROG Ryujin III 360 ARGB or the Cooler Master MasterLiquid 360 Atmos II LCD.

Product Type Best for Key spec Main limit
ARCTIC Liquid Freezer III 360 360 mm AIO Ryzen 7 and Ryzen 9 builds VRM fan, pump 800 to 2800 RPM No lighting, 38 mm radiator
DeepCool LS720 SE 360 mm AIO High airflow builds 85.85 CFM, fans 500 to 2250 RPM Fixed 3100 RPM pump
Thermalright Frozen Warframe 360 360 mm AIO Display on a simpler build LCD pump head, 70.84 CFM No VRM fan
Cooler Master MasterLiquid 360 Atmos II LCD 360 mm AIO Screen and linked fans 190 CFM, pump 3400 RPM Fan noise 38.5 dBA
ASUS ROG Ryujin III 360 ARGB 360 mm AIO Large display and VRM cooling 3.5 inch LCD, VRM fan 5100 RPM Fan noise 36.45 dB(A)
be quiet! Pure Loop 2 FX 360mm 360 mm AIO Quiet ARGB builds Pump 4000 to 5500 RPM, refill port No display
Lian Li Galahad II Trinity Performance 360 360 mm AIO Maximum published airflow 109.6 CFM, 6.99 mmH2O 32 mm radiator, 28 mm fans

How we selected

Every cooler in this guide was picked from published maker and listing page specification pages, and each one lists AMD AM4 and AM5 socket support in its specifications. The shortlist favors 360 mm all-in-one models from known cooling brands, with a spread of plain, lit and display designs.

For each model, the notes below record radiator size, fan speed range, airflow, static pressure, pump speed, tube length and socket support as listed. Where a page does not state a figure, the text says so rather than filling the gap. No cooler in this guide was run on a test bench for this article, and no temperature or noise result here comes from hands-on use.

Best AMD CPU water coolers for every Ryzen build

Seven 360 mm all-in-one coolers made this list, and each one lists AM4 and AM5 support. They differ in radiator thickness, fan speed, pump design, lighting and displays, so the right pick depends on your case space, your noise tolerance and whether you want a screen or extra board cooling.

ARCTIC Liquid Freezer III 360

The ARCTIC Liquid Freezer III 360 suits Ryzen 7 and Ryzen 9 owners who run long gaming sessions or heavy work loads and want cooling that also helps the board around the socket. Its built-in VRM fan and wide pump range give it a practical edge over plainer coolers, and its plain black look fits builds that skip lighting.

The maker lists a 398 x 120 x 38 mm aluminum radiator with three 120 mm fans that run from 200 to 1800 RPM, with maximum airflow of 56.3 CFM and static pressure of 2.2 mmH2O. The pump runs from 800 to 2800 RPM under PWM control, and a separate VRM fan runs from 400 to 2500 RPM. The cold plate is copper, the tubes are 450 mm sleeved rubber, and fan and pump speeds are managed through a single 4-pin connector. Socket support lists AMD AM4 and AM5.

The limits are easy to see. The radiator is 38 mm thick, which is thicker than the 27 mm radiators on several rivals here, so it needs more clearance in the case. There is no lighting and no display on the pump head, and the fan ceiling of 1800 RPM is lower than some rivals here.

Pros:

  • Integrated VRM fan cools the board parts near the socket
  • Wide pump range from 800 to 2800 RPM under PWM control
  • Single 4-pin connector manages fans and pump together

Cons:

  • No lighting and no pump display
  • 38 mm radiator needs more case clearance than 27 mm models
  • Fan ceiling of 1800 RPM is lower than several rivals

Buy if you run a hot Ryzen chip for long stretches, you want board cooling as well as chip cooling, and you like a clean build without lighting.

Skip if your case only fits a slim radiator with fans, or you want a lit pump head or a display on the cooler.

DeepCool LS720 SE

The DeepCool LS720 SE suits builders who want strong published airflow, a slim radiator and ARGB lighting without a display or extra software. Its wide fan range and fixed-speed pump keep the design simple, and the infinity mirror pump block gives the build a lit focal point.

The maker lists a 402 x 120 x 27 mm aluminum radiator with three 120 mm PWM fans that run from 500 to 2250 RPM, with maximum airflow of 85.85 CFM and static pressure of 3.27 mmH2O. The pump runs at a fixed 3100 RPM, and maximum fan noise is listed at 32.9 dB. The base plate is copper, the fans use hydro bearings, the tubing is 410 mm of sleeved tube, and lighting runs through a 3-pin ARGB connector. Socket support lists AMD AM4 and AM5.

The limits follow from the simple design. The pump runs at one fixed speed of 3100 RPM, so there is no pump speed range to tune. There is no display on the pump head and no extra fan for the board parts near the socket.

Pros:

  • High published airflow of 85.85 CFM from a slim 27 mm radiator
  • Wide fan range from 500 to 2250 RPM
  • ARGB fans and infinity mirror pump block

Cons:

  • Fixed 3100 RPM pump speed with no range to tune
  • No pump display
  • No extra fan for board cooling

Buy if you want the highest published airflow among the slim radiators here, you like ARGB lighting, and you want a simple cooler with no display to set up.

Skip if you want to tune pump speed, or you want a screen on the pump head.

Thermalright Frozen Warframe 360

The Thermalright Frozen Warframe 360 suits builders who want a pump display and ARGB fans in a straightforward 360 mm cooler. Its LCD head shows system data at a glance, and its airflow and noise figures sit in the middle of this group, which makes it a balanced pick for a first liquid cooled build.

The maker lists a 360 mm aluminum radiator with three 120 mm fans that reach a maximum of 2000 RPM, with maximum airflow of 70.84 CFM and static pressure of 2.63 mmH2O. The pump runs at a maximum of 3000 RPM, the pump head carries an LCD, and the fans use S-FDB bearings. Fan noise is listed at a maximum of 29.8 dB and pump noise at 23 dB. The base plate is copper, the tubing is 400 mm of sleeved rubber, and lighting runs through a 3-pin 5V ARGB header. Socket support lists AMD AM4 and AM5.

The limits are worth noting before you buy. The page used for this guide lists only a maximum fan speed of 2000 RPM and does not state a fan speed range, so low-speed behavior is not published there. There is no extra fan for the board parts near the socket, and the listed mean time to failure of 40,000 hours is shorter than some rivals here.

Pros:

  • LCD on the pump head for system data
  • Strong published airflow of 70.84 CFM
  • Low listed pump noise of 23 dB

Cons:

  • No extra fan for board cooling
  • No published fan speed range, only a 2000 RPM maximum
  • Listed mean time to failure of 40,000 hours is shorter than some rivals

Buy if you want a pump display with ARGB fans and solid published airflow, and you do not need board cooling or a tuned pump range.

Skip if you want a VRM fan, a published low-speed fan range, or the longest listed component life figures in this group.

Cooler Master MasterLiquid 360 Atmos II LCD

The Cooler Master MasterLiquid 360 Atmos II LCD suits builders who want a round display and a tidy install, since its three fans arrive as one linked unit with a single cable path. Its listed pump speed and airflow are among the strongest here, which fits high-load Ryzen builds that live in a case with room for a 360 mm radiator.

The maker lists a 394 x 119.2 x 27 mm aluminum radiator with a pump that runs at 3400 RPM plus or minus 300 RPM and pump noise listed at a maximum of 25 dBA. The tube length is 400 mm, and the linked triple fan unit measures 361 x 122 x 26.5 mm with a speed range of 690 to 2500 RPM. Listed airflow reaches 190 CFM with static pressure of 3.61 mmH2O, and fan noise is listed at 38.5 dBA. The LCD measures 53.3 mm across at 480 x 480 px and 60 Hz, and it connects by USB Type-C to a motherboard 9-pin header. Pump mean time to failure is listed above 210,000 hours, fan mean time to failure is listed above 160,000 hours, and socket support lists AMD AM5 and AM4.

The limits center on noise and the fan unit. Listed fan noise of 38.5 dBA is the highest in this group, so quiet builds should look elsewhere. The fans come as one linked triple unit rather than three separate fans, which limits how you can place them. The display needs its own USB connection to the board, which adds a cable to plan for.

Pros:

  • Round LCD with 480 x 480 px resolution and 60 Hz refresh rate
  • High listed pump speed of 3400 RPM and strong 190 CFM airflow
  • Long listed life figures above 210,000 hours for the pump

Cons:

  • Listed fan noise of 38.5 dBA is the highest in this group
  • One-piece fan unit limits placement options
  • Display needs a USB Type-C to 9-pin board connection

Buy if you want a pump screen, the strongest listed airflow here, and a clean single-cable fan setup.

Skip if low noise is your first concern, or you want three separate fans you can place on their own.

ASUS ROG Ryujin III 360 ARGB

The ASUS ROG Ryujin III 360 ARGB suits builders who want a large color display and board cooling in one cooler. Its 3.5 inch LCD and embedded board fan set it apart from plainer models, and its magnetic fans snap together so only one cable serves all three fans.

The maker lists an 8th Gen Asetek pump that runs from 800 to 3600 RPM, with a 399.5 x 120 x 30 mm aluminum radiator and three 120 mm magnetic daisy-chainable fans that run from 600 to 2200 RPM. Listed airflow reaches 70.07 CFM with static pressure of 3.88 mmH2O and fan noise of 36.45 dB(A). An embedded Axial-tech fan runs at 5100 RPM with airflow of 21.08 CFM and air pressure of 5.53 mmH2O. The tube length is 400 mm, the cold plate is copper, thermal compound is pre-applied, and the contact surface is listed as 32 percent larger than the prior design. Socket support lists AMD AM5 and AM4.

The limits are size and noise. The radiator is 30 mm thick and the pump block measures 89 x 91 x 101 mm, so check clearance near RAM and board parts before you buy. Listed fan noise of 36.45 dB(A) is high for this group, and the display and embedded fan add cables and setup steps.

Pros:

  • Large 3.5 inch full color LCD on the pump block
  • Embedded fan cools the board parts near the socket
  • Magnetic fans need only one cable for all three

Cons:

  • Listed fan noise of 36.45 dB(A) is high in this group
  • 30 mm radiator and tall 101 mm pump block need clearance
  • Display and extra fan add cables and setup steps

Buy if you want a big pump screen plus board cooling, and your case has room for a 360 mm radiator and a tall pump block.

Skip if your case is tight, or you want the quietest listed fans in this guide.

be quiet! Pure Loop 2 FX 360mm

The be quiet! Pure Loop 2 FX 360mm suits builders who put low noise first and still want ARGB lighting. Its decoupled pump, refill port and included coolant bottle are rare in this group, and the ARGB-PWM hub lets one board header serve several lit parts at once.

The maker lists a 397 x 120 x 27 mm aluminum radiator with three Light Wings 120 mm PWM high-speed fans that reach 2500 RPM, and a pump that runs at 5500 RPM with an adjustable range of 4000 to 5500 RPM. Noise is listed at 8.9, 20.1 and 34.0 dB(A) at 25, 50 and 100 percent fan speed. The base is nickel-coated copper, and the fans use rifle bearings. The refill port is easy to reach, a 100 ml bottle of coolant is included, and the ARGB-PWM hub can sync up to 6 ARGB components and PWM fans. Fan static pressure is listed up to 2.6 mmH2O, and socket support lists AMD AM5 and AM4.

The limits are about features and published figures. There is no display on the pump head and no extra fan for the board parts near the socket. The page used for this guide does not state a maximum airflow figure for the fans, so airflow cannot be compared with the other models here on that page. The pump range of 4000 to 5500 RPM is the fastest listed here.

Pros:

  • Refill port with a 100 ml coolant bottle included
  • ARGB-PWM hub syncs up to 6 components from one header
  • Low listed noise of 8.9 dB(A) at 25 percent fan speed

Cons:

  • No pump display
  • No extra fan for board cooling
  • No maximum airflow figure stated on the page used

Buy if quiet running, easy refills and tidy ARGB control matter most to you.

Skip if you want a pump screen, or you want a published airflow figure to compare against other models.

Lian Li Galahad II Trinity Performance 360

The Lian Li Galahad II Trinity Performance 360 suits builders who want the strongest published airflow in this guide and a cooler they can restyle. Its two fan modes, swappable pump caps and rotating tube connector give it more setup options than the plainer models here, and its LCP fans are built for radiator work.

The maker lists a 396 x 130 x 32 mm aluminum radiator with double-wave fins and three 120 mm LCP fans that are 28 mm thick. The pump runs up to 4200 RPM, and the fans run in two modes: low mode from 200 to 2300 RPM and high mode from 200 to 3000 RPM. Airflow is listed at 81.9 CFM in low mode and 109.6 CFM in high mode, with static pressure of 4.15 mmH2O in low mode and 6.99 mmH2O in high mode. Fan noise is listed at 29 dB(A) in low mode and 38.1 dB(A) in high mode, and pump noise is listed at 22.03 dBA. The tube length is 385 mm with a 45-degree connector that turns 360 degrees, and three pump caps are included for different looks under L-Connect 3 software. Socket support lists AMD AM5 and AM4.

The limits are about size and noise. The radiator is 32 mm thick, the fans are 28 mm thick, and the radiator is 130 mm wide, so the stack is the thickest and widest in this group and needs careful case checks. High mode fan noise of 38.1 dB(A) is near the top of the group, and full control runs through L-Connect 3 software.

Pros:

  • Highest published airflow at 109.6 CFM in high mode
  • Strongest listed static pressure at 6.99 mmH2O in high mode
  • Three interchangeable pump caps for different looks

Cons:

  • Thickest stack here with a 32 mm radiator and 28 mm fans
  • High mode fan noise of 38.1 dB(A)
  • Full control needs L-Connect 3 software

Buy if you want the strongest published airflow and static pressure, and you like to restyle the pump look.

Skip if your case has tight radiator clearance, or you want quiet running at full fan speed.

Buying guide

All seven coolers in this guide use a 360 mm radiator, so the choice comes down to fit, noise, features and the details that match your build. The notes below walk through radiator size, pump behavior, fan figures, socket support and lighting so you can compare models on the same terms.

Radiator size and case fit for AMD CPU water coolers

A 360 mm radiator needs three 120 mm fan mounts in a row, so start by reading your case manual for radiator support and measuring the mount area. Radiator thickness in this group runs from 27 mm to 38 mm, and fan thickness runs from 25 mm to 28 mm, so the full stack needs real clearance.

Pump speed and noise

Pump speed sets how fast coolant moves through the loop, and the listed ranges here run from 800 RPM at the low end of the ARCTIC pump to 5500 RPM at the top of the be quiet! pump. Most models use PWM control, which lets the board set pump speed from load.

Fan airflow and static pressure

Airflow in CFM tells you how much air a fan moves, while static pressure in mmH2O tells you how well it pushes air through the dense fins of a radiator. Radiator fans need both, and a high CFM figure with low pressure can still struggle on a thick radiator.

Socket support and mounting hardware

Every cooler in this guide lists AMD AM4 and AM5 support, so any of them mounts on a current Ryzen board. AM5 uses the same cooler mounting pattern as AM4, which is why one bracket set can serve both sockets, but confirm that the box lists your socket before you buy.

Lighting, displays and software control

Lighting and displays change the look of a build and the setup work that comes with it. The DeepCool, Thermalright, ASUS and be quiet! models use ARGB lighting through a 3-pin 5V header, the Cooler Master and ASUS models add a pump display, and the ARCTIC model has no lighting.

FAQ

These answers cover the questions that come up most often when fitting a 360 mm water cooler to an AMD Ryzen build. Each answer draws on the specifications and features listed for the seven models in this guide, plus general fitting practice for all-in-one coolers.

Do all AMD CPU water coolers fit AM4 and AM5?

Not every cooler on the market fits both sockets, but all seven models in this guide list AMD AM4 and AM5 support in their specifications. AM5 shares the AM4 mounting pattern, so makers can serve both sockets with one bracket set. Still, read the socket list on the box or the product page before you buy.

What radiator size fits a mid tower case?

Most mid tower cases list support for a 360 mm radiator at the front or the top, but the exact spots vary by model, so read your case manual first. A 360 mm radiator needs three 120 mm fan mounts in a row plus room for the radiator thickness and the fans.

Do I need to refill an all-in-one cooler?

Most all-in-one coolers are sealed at the factory and are not meant to be opened or refilled by the owner. Six of the seven models in this guide have no refill port listed, so they are used as sealed units for their whole service life. The be quiet! Pure Loop 2 FX 360mm is the exception, with a refill port and a 100 ml bottle of coolant in the box.

How loud are 360 mm AIO coolers?

Listed fan noise for the models in this guide runs from 8.9 dB(A) at low speed on the be quiet! model to 38.5 dBA at full speed on the Cooler Master model, with most models in the 29 to 38 dB(A) band at full speed. Listed pump noise runs from 19 dB to 25 dBA.

Can I mount the radiator at the front of the case?

Yes, if your case lists 360 mm radiator support at the front, you can mount it there. Front mounting feeds the radiator with cool outside air, which suits builds where the graphics card already warms the air inside the case. Check that the front panel has room for the radiator plus fans, and that the tubes can reach the pump block without kinks.

Conclusion

For most Ryzen builds, the ARCTIC Liquid Freezer III 360 gives the most complete package with its VRM fan and wide control range. If a screen matters more, the ASUS ROG Ryujin III 360 ARGB or the Cooler Master Atmos II LCD fit the brief. Measure your case first, confirm AM4 or AM5 mounting, then pick the cooler that matches your build.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.