Updated Nov 16, 2026· 13 min read

Key takeaways

  • Six wooden stands, carts and tables for portable and tabletop grills compared by wood type, dimensions, load ratings and storage, in fir and acacia builds.

A portable grill cooks better at working height than on the ground, and the best wooden stand for portable grills adds prep space and storage at the same time. The six wooden stands, carts and tables below cover fir carts for tabletop grills and acacia nest tables for kamado cookers, with sizes from a compact cart to a full island.

How to choose a wooden stand for portable grills

Wooden grill stands come in three formats: rolling carts with steel tops, kitchen islands with cabinets, and nest tables that cradle a kamado. Start by matching the format to your grill, then check the fit, the stated load rating and the storage against your routine.

Three formats: cart, island and nest table

Rolling carts put a tabletop grill at counter height and move with it, which suits renters and anyone who stores the grill indoors. Islands add cabinets and drawers for a fixed patio station. Nest tables hold a kamado inside the frame, trading mobility for a built-in look.

The four fir models below are carts and islands with stainless steel tops, built for tabletop grills, griddles and pizza ovens. The two acacia models are nest tables made for one grill family. Your grill type decides the shortlist before size or storage enter the discussion.

What size wooden stand for portable grills do you need?

Measure the grill’s footprint first, then the space around it you want for plates and tools. The stands below run from a 40.5 inch cart to a 66.5 inch island, and heights cluster near standard counter height, from 34.3 to 39.1 inches, so most cooks work without stooping.

Depth matters as much as width. A 23 or 24.8 inch deep top swallows a tabletop grill plus a tray, while an 18.5 inch deep top fits the grill and little else. Check the maker’s stated grill fit where one is given: one island below is built for tabletop grills measuring 21 to 22 inches.

Load ratings, read component by component

A single headline capacity can hide three different ratings: the whole frame, the grill shelf and the prep top. On this list the clearest listings name each one, such as a middle shelf rated over 215 lb under a 400 lb overall maximum, or a prep counter rated at 110 lb on its own.

Where a listing gives a capacity without naming the part it covers, treat that stand as unproven for grill duty until the maker clarifies the figure. A portable grill plus fuel and food is a concentrated load, and the rating that matters is the one for the exact shelf or top the grill will sit on.

The six stands, carts and tables compared

Each entry below lists the wood, the overall dimensions, the grill fit and load figures the maker states, and the storage built in. Four are fir carts and islands with steel tops; two are solid acacia tables that hold a kamado in a nest rather than on a flat top.

1. Andehomy 66.5 inch island: the kamado and tabletop hub

The Andehomy island is built from 100 percent fir wood with 1.2 inch thick 201 stainless steel work tops. Its middle shelf supports over 215 lb and is built for the Large Big Green Egg and classic Kamado Joe, plus tabletop and egg grills measuring 21 to 22 inches, with a 5-level adjustable shelf for height.

Two end tables of 18.5 x 23 inches flank the grill bay, and with the shelf raised they join into a 60 x 23 inch surface of 1380 square inches. The maker’s maximum weight recommendation is 400 lb, the frame measures 23 x 66.5 x 34.3 inches and weighs 86.2 lb, and six wheels with four lockable brakes move the whole station.

  • Wood: 100 percent fir, steel tops 1.2 inches thick
  • Grill fit: tabletop and egg grills 21 to 22 inches
  • Middle shelf rating: over 215 lb; overall maximum 400 lb
  • Size: 23 x 66.5 x 34.3 inches; 86.2 lb
  • Storage: central drawer, two cabinets, spice and towel racks

A full cabinet swallows a gas cylinder with an exit hole for the line, so a gas tabletop grill can run with its tank hidden. This is the pick for a permanent patio station that hosts a kamado today and a tabletop grill tomorrow.

The modular frame adapts as the setup changes: the middle front stick removes to clear a tabletop grill’s controls, the handle and paper roll holder can be left off during assembly, and the two side shelves adjust or come off entirely. Few stands at this size let the owner reconfigure the grill bay rather than work around it.

2. Merax 60.2 inch island: the entertainer’s layout

The Merax island pairs a solid fir wood frame with a stainless steel top and a bar counter layout. Overall dimensions are 60.2 x 24.8 x 39.1 inches, the tabletop measures 46 x 18.3 inches, and the wide bar countertop with a cut-out area carries a stated capacity of 110 lb.

Storage runs deep: 2 drawers, 2 lower cabinets with adjustable shelves and a removable wine rack for 9 bottles. A built-in gas passage routes a propane line for a grill set into the counter, and 4 lockable rubber wheels turn a full 360 degrees, with anti-tipping ground nails included for a fixed setup without wheels.

  • Wood: solid fir frame, stainless steel top
  • Counter capacity: 110 lb as stated by the maker
  • Size: 60.2 x 24.8 x 39.1 inches; top 46 x 18.3 inches
  • Wheels: 4 lockable, full 360 degree swivel
  • Storage: 2 drawers, 2 cabinets, 9-bottle wine rack

The layout suits hosts: grill in the cut-out, prep on the counter, drinks in the rack. The 110 lb counter rating is the figure to respect when choosing which grill sits in it, since the maker states that limit for the countertop rather than the frame.

Design details lean toward furniture rather than equipment: long retro handles, slatted door panels and magnetic stoppers on the cabinets, with 3 color options and an assembly video from the maker. Hosts who want the grill station to read as part of the patio set will find this the easiest of the six to match.

3. Trygoal 40.5 inch cart: the compact all-rounder

The Trygoal cart is the smallest stand here, a solid wood frame with a 1.2 inch thick 201 stainless steel top, sized at 40.5 x 21 x 36.25 inches and weighing 39.68 lb. The square tabletop has 21 inch sides, and the listing presents the cart as a prep table for a pizza oven or a tabletop grill.

A drop leaf on one side widens or shortens the top as needed; the maker notes the leaf has no base, so it is for plates and tools rather than heavy items. Inside, a removable center shelf adjusts the cabinet to taller gear, and 2 lockable swivel wheels roll the cart while the other end stands on fixed feet.

  • Wood: solid wood frame, steel top 1.2 inches thick
  • Size: 40.5 x 21 x 36.25 inches; 39.68 lb
  • Top: square, 21 inch sides, plus a drop leaf
  • Storage: drawer, cabinets, removable center shelf
  • Extras: double spice rack, 4 S hooks, trash bag holder

Small patios and balcony grillers get the most from this one. It gives a portable cooker a home base with real storage, at a size that still rolls through a doorway, and the maker puts assembly at 1 to 2 hours with labeled parts.

4. Zevemomo grill cart: the long steel top

The Zevemomo cart is 100 percent fir wood under a 1.2 inch thick stainless steel top of 18.5 x 43.3 inches, which the maker works out to 801 square inches of prep and grill space. Overall dimensions are 50.3 x 18.5 x 36.3 inches, a long and narrow profile for tight patios.

A built-in gas grill exit routes a line from a tank stored inside, and the cabinet doors carry refrigerator-style storage racks for bottles and jars. Four lockable wheels move the cart, and the fittings list covers the daily tools: a spice rack, a paper towel holder, 4 S-hooks and a bottle opener.

  • Wood: 100 percent fir, steel top 1.2 inches thick
  • Top area: 801 square inches (18.5 x 43.3 inches)
  • Size: 50.3 x 18.5 x 36.3 inches
  • Wheels: 4 lockable
  • Storage: cabinet with door racks, shelves, spice rack

The long top is the reason to pick it: a tabletop grill at one end still leaves a full prep run beside it. One caution from the listing itself: its stated weight capacity note does not name the component it covers, so confirm the grill shelf rating with the seller before loading a heavy cooker.

The door racks deserve a mention of their own: modeled on refrigerator door storage, they hold bottles and jars inside the cabinet doors, which frees the shelves for bulkier gear like charcoal bags and grill covers. On a narrow cart where every shelf is spoken for, that borrowed space is genuinely useful.

5. Big Green Egg Acacia Table: the XLarge nest table

This table is fabricated from all-natural, kiln-dried solid planks of genuine acacia wood, a hardwood the maker notes is highly regarded for its weathering characteristics. Assembled, it measures 61 inches long, 32 inches wide and 31 inches high, in a freestanding frame the grill sits in rather than on.

The listing states the table works with the maker’s table nest, which cradles the kamado, and with the weatherproof ventilated cover made for the setup. Working and serving area runs along both sides of the grill, and the grill itself is not included, as with every stand on this list.

  • Wood: solid acacia, kiln-dried planks
  • Size: 61 x 32 x 31 inches
  • Format: nest table for the XLarge EGG
  • Works with the table nest and ventilated cover
  • Mounting: freestanding; assembly required

Kamado owners who want the built-in look without masonry get their answer here. The 32 inch depth gives the widest side workspace of the two acacia tables, which suits cooks who plate and rest meat beside the grill through long sessions.

6. Big Green Egg Custom EGG Table: the narrower acacia

The Custom EGG Table is handcrafted from solid acacia wood, with the natural grain patterns and color variations the maker highlights as one of a kind on each piece. It measures 60 inches long, 25 inches wide and 31 inches high, a full 7 inches narrower than the XLarge table above.

The listing describes room for storage, prep and serving around the grill, and offers a set of four sturdy wheels as an add-on for owners who want to roll the setup between shade and open patio. Like its sibling, it is freestanding and requires assembly, and the grill is sold separately.

  • Wood: solid acacia, handcrafted
  • Size: 60 x 25 x 31 inches
  • Format: nest table, Custom EGG fit
  • Optional add-on: set of four wheels
  • Mounting: freestanding; assembly required

The narrower footprint is the deciding factor: it threads into patios where the 32 inch deep table crowds the walkway, while keeping the same 31 inch working height and the same acacia build. Measure the space first; the wood and the format are otherwise a matched pair.

Side-by-side comparison

The table collects the wood, overall size and the stated grill fit or capacity for all six stands. Where a maker states no single grill capacity, the cell says so rather than borrowing a figure from another part of the listing or from a different model.

Stand Wood Overall size Grill fit / stated rating Wheels
Andehomy 66.5 inch island Fir 23 x 66.5 x 34.3 in Tabletop grills 21-22 in; shelf over 215 lb 6, four lockable
Merax 60.2 inch island Fir 60.2 x 24.8 x 39.1 in Counter capacity 110 lb 4 lockable swivel
Trygoal 40.5 inch cart Solid wood 40.5 x 21 x 36.25 in Pizza oven / tabletop class 2 lockable swivel
Zevemomo grill cart Fir 50.3 x 18.5 x 36.3 in Top 801 sq in; rating unclear in listing 4 lockable
BGE Acacia Table XLarge Acacia 61 x 32 x 31 in Nest fit for XLarge EGG None listed
BGE Custom EGG Table Acacia 60 x 25 x 31 in Nest fit, Custom EGG Add-on set of 4

Read by grill first: kamado owners land on the two acacia tables, tabletop grill owners on the Andehomy for its stated 21 to 22 inch fit, and everyone else chooses between the Merax, Trygoal and Zevemomo by patio width and storage needs. Height is the quiet constant: all six put the cooking surface between 31 and 39.1 inches off the ground.

Buying guide and wood care

Wood outdoors asks for a little routine care in exchange for its looks and solidity. The notes below cover the wood choice, heat clearance around the grill and the wheel and leveling details that decide how a stand behaves on a real patio, and most of the routine is measured in minutes.

Fir versus acacia outdoors

Fir is the lighter, softer wood in the four carts, usually under a colored finish, and the makers pair it with steel tops so the working surface is metal rather than timber. Acacia is a dense hardwood used here in solid planks, kiln-dried for the XLarge table and handcrafted for the Custom table.

Both woods live outdoors better with shelter from the worst weather. One cart maker on this list recommends storing the cart in a sheltered area during extreme weather, and the acacia tables pair with a ventilated cover. A cover and a dry corner extend the finish on either wood. Neither wood asks for workshop skills: a cloth, a cover and an occasional check of the fasteners cover the whole routine.

Measure the grill, then the route it travels

Two measurements decide fit before any other feature matters: the grill’s footprint against the stand’s top or nest opening, and the stand’s own footprint against the patio corner, gate or doorway it must pass through on the way to its spot at home each season.

The Andehomy makes the first check easy by stating its grill class outright, 21 to 22 inch tabletop and egg grills. For the nest tables, the fit is fixed by the kamado model the table is cut for. For flat-top carts, leave room beside the grill for a tray: a top that only just fits the cooker turns every cook into a balancing act.

Heat clearance and the surface under the grill

On the four carts, the grill sits on a stainless steel top 1.2 inches thick, which puts metal between the cooker and the wood frame. On the acacia tables, the kamado sits in a table nest inside the frame rather than directly on the wood, which is the maker’s own answer to the same question.

Follow the grill maker’s clearance figures for the space around and above the cooker, and keep the stand on a level, non-combustible patio surface where the grill manual requires one. A stand changes the height of the cooker, not the clearances its maker specifies.

Wheels, locks and level ground

Lockable wheels appear on every cart here, from 2 on the Trygoal to 6 on the Andehomy, and they earn their place twice: rolling the station out for a cook, then locking it still while you work. The Merax adds ground nails for owners who remove the wheels and park the island in one spot.

Patios slope more than they appear to. A stand that rocks on its wheels will rock more with a hot grill on top, so test the parked spot empty, lock every wheel that has a brake, and shim or move any stand that does not sit flat before the grill goes on.

Questions buyers ask

Three questions decide most purchases in this small category: whether the stand can live outside, which cookers it fits beyond grills, and how much building it needs. The answers below stick to what the makers state for these six models, and none of the three needs a showroom visit to settle.

Can a wooden stand for portable grills stay outside all year?

It can, with the care the makers describe. The acacia tables are built for outdoor use and pair with a weatherproof ventilated cover, and acacia is noted for its weathering characteristics. The fir carts ask for a sheltered spot during extreme weather, per the Andehomy maker’s own recommendation.

Year-round outdoor life shortens any wood finish, so the practical routine is a cover, a dry and level parking spot, and a wipe-down before winter. Owners in harsh climates who store the stand under a roof between cooks will keep the wood looking its best the longest.

Day-to-day care is light: the Andehomy maker lists a wipe with a dry cloth as the care instruction for its fir frame, and the same habit suits the other stands here. Grease spots wiped the day they land, rather than the month after, are what keep a wooden top presentable beside a grill.

Do these stands fit griddles and pizza ovens too?

Yes, within their stated fits. The Trygoal listing is aimed at pizza ovens as much as grills, the Andehomy takes any tabletop cooker in its 21 to 22 inch grill class, and the flat steel tops on the Merax and Zevemomo hold a griddle as readily as a grill, provided the load stays within the stated rating.

The acacia tables are the exception: their nest openings are cut for one kamado family, so they do not convert to other cookers. Buyers who rotate between a griddle, an oven and a grill should stay with the flat-top carts and islands.

How much assembly should you expect?

Every stand on this list requires assembly. The Trygoal maker gives the clearest figure, 1 to 2 hours with labeled parts and a detailed manual, and the Andehomy likewise ships with step-by-step instructions and labeled hardware for its larger frame, drawers and cabinets.

Allow more time for the islands than for the tables: cabinets, drawers and six wheels take longer than four legs and a nest frame. Building on a flat surface with the grill off the stand, then wheeling the finished piece into place, is the order that works best. A second pair of hands helps with the long frames, which are awkward to square up alone.

Match the format to the grill and the stand chooses itself: the Andehomy island for a kamado or a 21 to 22 inch tabletop grill with room to grow, the Merax for hosting, the Trygoal for small spaces, the Zevemomo for a long prep run, and either acacia table for a kamado that deserves furniture of its own.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.