Updated Nov 16, 2026· 13 min read

Key takeaways

  • Compare food processors for vegans by stated prep functions: nut butter capacity, printed dough ratings, slicing volume, juicing and puree tools in the box.

Plant-based cooking is prep-heavy cooking: vegetables to slice, beans and lentils to puree, nuts to grind and doughs to knead, often all in the same session. The food processors for vegans below were picked only on the stated functions, capacities and attachments that match that workload, and on nothing else.

Quick verdict

The Magimix 5200XL covers the widest prep range here, with three bowls, a juicer and printed knead, blend and emulsify functions. The Cuisinart Custom 14 is the capacity pick, and the KitchenAid 9 Cup is the compact pick with printed nut butter guidance.

Match the machine to your heaviest prep day. Cooks who work through piles of vegetables want slicing and shredding volume, where the Custom 14 rates a full 14 cups. Cooks who make nut butters and doughs weekly want the printed capacities of the Custom 14 or the dough tools of the NutriBullet and KitchenAid. Cooks working in a small kitchen should start with the KitchenAid, whose accessories store inside its 9-cup bowl. The Oster covers the middle ground, with grinding on the bowl side and texture control on the jar side.

Model Bowl capacity Motor Stated prep evidence Main limit
Magimix 5200XL (18511US) 16, 12 and 6 cups 1100 watts Juice, knead, blend, emulsify printed; citrus juicer included Heaviest unit here at 24 pounds
Cuisinart Custom 14 (DFP-14BCNY) 14 cups 720 watts Hummus named in copy; nut butters rated at 3 cups No juicing tool in the box
NutriBullet Triple Prep System (NBKS50100) 7-cup bowl, 64 oz pitcher 1500 watts Nutmilk and Smoothie programs printed; dough blade included One-year warranty is the shortest here
Oster 3-in-1 Kitchen System (2160844) 5-cup bowl, 8-cup jar 1200 watts Grinding listed for the bowl; texture settings on the jar Programs are not named on the listing
KitchenAid 9 Cup (KFP0921) 9 cups 240 watts Booklet prints nut butter method for up to 3 cups of nuts Smallest motor rating in this group

How we selected these models

This list was built from task evidence, not diet claims. A model counted when its opened page stated functions and capacities that map to plant-based prep work: pureeing beans and vegetables, grinding nuts, kneading dough, slicing and shredding in volume, whisking, or juicing.

Each pick shows that evidence in a different printed form. The Custom 14 listing copy names hummus, salsa and guacamole outright, and its booklet rates nuts for nut butters at 3 cups. The Magimix page prints juice and emulsify among its functions and includes a citrus juicer. The NutriBullet prints a Nutmilk program. The KitchenAid booklet prints a nut butter method with a 3-cup nut limit. The Oster listing names grinding among its bowl jobs.

The selection is also deliberately separate from the blender-and-processor combination list elsewhere in this project: none of the five models here appears in that article, so readers comparing the two pages will not meet the same machines twice.

Capacity discipline mattered as much as function lists. Makers rate nut loads, dough loads and liquid loads separately from bowl volume, and those smaller numbers decide what a machine can repeat weekly without strain. Where a booklet printed such a figure, it is quoted in the model sections below; where it did not, the gap is stated plainly instead of being filled with a guess, because a guessed capacity helps no one plan a prep day.

Five food processors for vegans, matched to prep work

Each model below earned its place from its own pages: the prep functions it prints, the capacities its maker rates, and the attachments in the box. Read the stated capacities before the bowl headline, because nut, dough and liquid loads all rate lower than dry chopping volume.

Magimix 5200XL (18511US)

The Magimix page prints the broadest function list in this group: slice, grate, chop, whisk, blend, juice and knead, with emulsify and press named as well. For a prep-heavy kitchen that moves from citrus juice to dough to pureed soups in one day, that printed range covers the whole routine.

Three bowls divide the work: a 16-cup main bowl at 3.6 liters, a 12-cup midi bowl and a 6-cup mini bowl, driven by an 1100-watt induction motor. The box holds Sabatier stainless blades, two slicing discs and two grating discs at 2 and 4 millimeters, an egg whisk, a citrus juicer, a dough kneading blade and a BlenderMix ring printed for finer blending such as soups and batters. The maker’s capacity table rates bread dough at 2.6 pounds, pastry dough at 3.3 pounds and chopping at 3 pounds. The motor warranty runs 30 years with three years on parts. The unit measures 8.25 by 10.75 by 17.5 inches.

The limits are size and weight: at 24 pounds it is the heaviest machine here, and its page prints no nut butter capacity, so nut work rests on the general chopping and blending functions rather than a rated figure. Buy it if your prep spans juicing, dough and big vegetable batches. Skip it if you want a light machine that moves on and off the counter.

  • Pros: widest printed function range; three bowls; citrus juicer included
  • Cons: 24-pound weight; no printed nut butter capacity
  • Buy if: one machine must cover a full prep day
  • Skip if: you lift the machine in and out of a cupboard

Cuisinart Custom 14 (DFP-14BCNY)

The Custom 14 makes its case in its own listing copy, which states that the machine makes any kind of dip, puree soup or sauce including hummus, salsa and guacamole. Few pages name the exact spreads a plant-based kitchen makes weekly, and this one does it in a single sentence.

The 720-watt motor drives a 14-cup work bowl. The maker’s booklet rates sliced or shredded produce at the full 14 cups, nuts for nut butters at 3 cups, bread dough at 3 pounds from 6 cups of flour, cake batter at 4 pounds and cookie dough at 3-1/2 pounds. The metal blade is described as making nut butters, mayonnaise and sauces, and the unpacking list includes a dough kneading blade beside the chopping blade, a 4-millimeter slicing disc and a medium shredding disc. Warranty coverage is five years on the motor and a limited three years on the unit. The machine measures 11 by 7.9 by 14.8 inches and weighs 18 pounds.

Its limit is juicing: no juicer or press tool appears in its parts list, so citrus work stays manual. Buy it if dips, spreads and big shredded batches anchor your cooking. Skip it if juicing is a daily job you want the machine to handle.

  • Pros: hummus and dips named in copy; 3-cup nut butter rating; 14-cup shredding volume
  • Cons: no juicing attachment; 18-pound weight
  • Buy if: spreads and batch prep are your routine
  • Skip if: you want juicing in the same machine

NutriBullet Triple Prep System (NBKS50100)

The Triple Prep System is the only model here with a printed Nutmilk program, listed for its 64-ounce pitcher alongside Puree, Frozen Drinks and Smoothie programs. For kitchens that make nut and seed drinks at home, that named program is the most direct evidence in this group.

The 1500-watt base drives three vessels: the pitcher, a 7-cup processing work bowl, and 32-ounce and 24-ounce cups with two to-go lids. The bowl takes a chopping blade, a slice and shred disc and a dough blade, with Chop, Dough and Dip programs printed for it; the dough blade is described as mixing and folding dough for pie crust, pizza dough, small batch biscuits and shortbread cookies. A tamper is included. The base measures 8 by 7.75 by 19.75 inches, weighs 4.2 pounds, has a 29.5-inch cord and carries a one-year warranty.

The limits are the mid-sized 7-cup bowl and that short warranty. Buy it if drinks and doughs share your prep list and you want programs to run them. Skip it if you shred vegetables in family-size volumes every week.

  • Pros: printed Nutmilk program; dough blade included; three vessels on one base
  • Cons: 7-cup bowl; one-year warranty
  • Buy if: nut drinks, smoothies and doughs rotate through your week
  • Skip if: you need a large shredding bowl

Oster 3-in-1 Kitchen System with Texture Select (2160844)

The Oster listing names grinding among the jobs of its 5-cup processor bowl attachment, alongside chopping and slicing, and grinding is the task behind nut meals, seed blends and spice mixes. Its blender side adds Texture Select, with thin, medium and thick settings that suit drinks and purees of different body.

Power is rated at 1200 watts. The blending side holds an 8-cup jar and two 24-ounce Blend-n-Go cups for single servings, run by nine auto programs and four manual speeds: low, medium, high and pulse. The blade is a 6-point stainless steel design with what the maker calls Dual Direction Blade Technology. The system weighs 12.6 pounds.

Its limits are documentation and bowl size: the listing does not name its nine auto programs, so there is no printed nut or dough program to point to, and the 5-cup bowl is a mid-sized prep tool. Buy it if grinding and single-serve blending are your main jobs. Skip it if you want printed capacities for dough or nut loads.

  • Pros: grinding named for the bowl; texture settings; two carry cups
  • Cons: programs unnamed on the listing; 5-cup bowl
  • Buy if: you grind small batches and blend to go
  • Skip if: you need rated dough or nut capacities

KitchenAid 9 Cup Food Processor (KFP0921)

The KitchenAid booklet prints the most specific nut guidance here: to chop nuts or make nut butter, process up to 3 cups of nuts in short pulses, and for nut butter keep processing until smooth. That printed method, with a stated quantity, is exactly the evidence this list asks for.

The machine itself is the compact one: a 240-watt motor on 120 volts, a 9-cup bowl, and three speeds marked Low, High and Off/Pulse. The listing describes functions as chop, shred, mince, slice, knead, whip, mix and puree. The box holds a dough blade, an S blade, a shredding disc, a whisk accessory and a refrigerator lid, and every accessory stores inside the bowl. The booklet’s accessory guide pairs the whisk with cream and eggs at Low or High. The unit measures 7.87 by 9.65 by 15.35 inches, weighs 6.6 pounds and carries a one-year warranty.

The limit is power: 240 watts is the smallest rating in this group, so hard loads go in smaller batches, as the booklet’s own 3-cup nut limit reflects. Buy it if counter space is tight and nut butters are a regular make. Skip it if you process large, dense batches daily.

  • Pros: printed nut butter method with a 3-cup limit; whisk accessory; in-bowl storage
  • Cons: 240-watt motor; one-year warranty
  • Buy if: space is tight and batches are modest
  • Skip if: you run heavy loads every day

Buying guide

Plant-based prep leans on a handful of tasks repeated weekly: pureeing, grinding, kneading, slicing and shredding in volume. Judge these machines by the printed evidence for those tasks, in the order your own cooking uses them. That order differs by household, and the sections below follow it.

Which attachments matter in food processors for vegans?

Start with the blade and disc set. Every model here chops and slices, but the extras separate them: the Magimix adds a citrus juicer and an egg whisk, the KitchenAid adds a whisk accessory, and the NutriBullet adds a tamper for thick mixtures that stall in a pitcher.

Dough blades appear on the Magimix, Custom 14, NutriBullet and KitchenAid, which matters if breads and flatbreads are weekly work. A second, smaller bowl also earns its space: the Magimix mini bowl and the Custom 14’s full-size bowl handle the small sauce and the big slaw without washing in between, though only the Magimix here includes that second bowl in the box.

Nut and seed work: read the printed limits

Nut butter is the hardest common job in this style of cooking, so trust only printed numbers. The Custom 14 booklet rates nuts for nut butters at 3 cups, and the KitchenAid booklet caps its nut method at 3 cups of nuts, processed in pulses and then continuously until smooth.

Where a page prints no nut figure, as with the Magimix and the Oster, treat nut butter as general chopping work and keep batches modest. Grinding, named on the Oster bowl, suits nut meals and seed blends rather than smooth butters, and that distinction is worth respecting when you choose.

Dough capacity for breads and flatbreads

Printed dough ratings keep motors honest. The Custom 14 booklet rates bread dough at 3 pounds from 6 cups of flour, the Magimix table rates bread dough at 2.6 pounds and pastry dough at 3.3 pounds, and the NutriBullet dough blade copy names pie crust, pizza dough, biscuits and shortbread.

Match the rating to your loaf. A one-loaf household fits comfortably inside any of these figures, while double batches belong in the Custom 14 or Magimix bowls. The KitchenAid lists knead among its functions with a dough blade in the box, but prints no dough weight, so its batches should stay small.

Slicing and shredding volume

Vegetable prep is where bowl size pays off. The Custom 14 rates sliced or shredded produce at the full 14 cups, the Magimix pairs 2 and 4 millimeter slicing and grating discs with three bowl sizes, and the KitchenAid reversible disc covers slicing and shredding in a 9-cup bowl.

Disc thickness decides texture: the Magimix’s paired discs give fixed 2 and 4 millimeter cuts, while adjustable discs on other machines in this project widen the range. For weekly slaws, salads and stir-fry prep, feed tube width matters as well, since wider tubes mean less pre-cutting of onions, potatoes and cabbage.

Drinks, purees and emulsified dressings

Several picks cover the liquid side of this cooking style. The NutriBullet prints Nutmilk and Smoothie programs for its pitcher and cups, the Magimix prints blend and emulsify among its functions with a pusher described for mayonnaise and salad dressings, and the Oster jar offers texture settings from thin to thick.

Puree strength shows in the copy: the Custom 14 names hummus and puree soup, and the KitchenAid lists puree and mince among its functions. If dressings and sauces are daily work, weigh the emulsify evidence and the pitcher programs as heavily as the bowl.

FAQ

Questions about this category usually ask which tasks a machine really covers. The answers below rest only on the functions and capacities the makers print for these five models, plus general prep practice. If a function is not printed for a model, this list counts it as unproven for that model.

Do food processors for vegans need a juicer attachment?

Only if citrus juice is a regular job. Among these five, the Magimix alone includes a citrus juicer and prints juice among its functions, so it is the pick when morning citrus or marinade juice is routine. The other four leave juicing to a hand tool.

Note the difference in kind: a citrus juicer presses halved fruit, while the juice extraction for hard produce like carrots belongs to a different appliance class entirely. None of the pages here claims that second job, and this list does not pretend otherwise.

Can these machines make nut butter from whole nuts?

Two of them print the method and the limit. The Custom 14 booklet rates nuts for nut butters at 3 cups, and the KitchenAid booklet describes processing up to 3 cups of nuts in short pulses, then continuously for nut butter until smooth, with storage in the refrigerator.

The NutriBullet, Magimix and Oster pages do not print a nut butter figure, so their nut work is best treated as chopping and grinding in modest batches. When nut butter is a weekly staple, the printed evidence points to the two Cuisinart and KitchenAid booklets.

Which model handles the biggest vegetable prep days?

The Custom 14, on its maker’s numbers: a 14-cup bowl rated for sliced or shredded produce at the full 14 cups, with a 4-millimeter slicing disc and a medium shredding disc in the box. The Magimix follows with its 16-cup main bowl and paired slicing and grating discs.

Volume is only half the story, though. A wide feed tube shortens prep as much as a big bowl does, and the Custom 14’s extra-large feed tube is part of its listing copy. For smaller households, the KitchenAid’s 9-cup bowl covers a family meal with less machine to wash.

Is a dough blade necessary for plant-based baking?

For yeast doughs, the printed ratings assume one. The Custom 14 booklet lists a dough kneading blade in the box and rates bread dough at 3 pounds, and the Magimix includes a dough kneading blade with bread and pastry ratings of its own printed in its capacity table on the maker page.

Pastry and biscuit work is more forgiving, since the NutriBullet dough copy names pie crust and shortbread among its jobs and a metal blade handles short doughs in general practice. If your baking is mostly flatbreads and loaves, choose by the printed dough capacity first.

Can one machine cover a full day of prep?

The Magimix comes closest on the printed range of any model here: three bowls, juicing, kneading, blending, whisking and emulsifying functions, and discs for slicing and grating at two thicknesses. A cook can move from juice to dough to puree without changing machines.

The honest limit is specialization. No model here prints every capacity: the Magimix lacks a nut butter figure, the Custom 14 lacks a juicer, and the KitchenAid lacks the power for heavy loads. Pick the machine whose printed strengths match your most frequent tasks.

Conclusion

Choose on printed prep evidence: the Magimix covers the widest function range with three bowls and a juicer, the Custom 14 prints the strongest capacities for spreads and shredding, and the KitchenAid prints a clear nut butter method in the smallest frame of the five, while the NutriBullet adds the only printed nut drink program.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.