Updated Nov 16, 2026· 15 min read

Key takeaways

  • Compare kitchen faucets with pull down sprayer designs on flow rate, spout reach, hole fit and docking, using only specs printed on each listing page itself.

A pull down spray head only earns its place if the wand docks firmly, the hose moves freely and the spout reach suits the sink. This guide compares kitchen faucets with pull down sprayer designs on the numbers each maker or listing page prints: flow rate, spout reach, spout height, hole fit and deck thickness.

Quick verdict

Six pull down models stand out for different reasons. The Delta Essa and Delta Trinsic print the longest spout reaches here at 9-1/4 in and 9-1/2 in, the Kohler Crue is the tall professional style option at 21-3/8 in, and the Moen Adler and Moen Sleek keep reach shorter for smaller sinks.

Every model below is a single handle, deck mounted pull down faucet sold through a current listing page. The split that matters most is reach: models at 9 in and beyond suit wide or double bowl sinks, while the two Moen models at 7-1/2 in and 7-5/8 in keep the water stream closer to the faucet body. Flow rate splits the group too, with three models at 1.5 gpm and three at 1.8 gpm as printed on their pages. Docking systems differ by brand, and each product section names the system its page describes.

Product Type Best for Key spec Main limit
Moen Adler 87233SRS Pull down, single handle Shorter reach sinks 7-1/2 in spout reach, 1.5 gpm Shortest reach in this group
Delta Essa 9113-DST Pull down, single handle Wide sinks 9-1/4 in spout reach, 1.8 gpm Spout height figure varies by listing
Kohler Crue K-22973-BL Professional style pull down Tall pots and pro styling 21-3/8 in height, three spray functions Needs vertical room above the sink
Moen Sleek 7864SRS Pull down, single handle Compact modern kitchens 7-5/8 in spout reach, 1.5 gpm Reach is short for double bowls
Delta Trinsic 9159-DST Pull down, single handle Longest stated reach 9-1/2 in spout reach, brass body Deck plate not included
Delta Lenta 19802Z-BL-DST Pull down, single handle ShieldSpray cleaning 16-1/4 in height, 1.8 gpm Zinc body, not brass or steel

How we selected

Selection started with the spray format itself: each model had to be listed as a pull down kitchen faucet on a page that could be opened and read in full. Models whose pages did not print a flow rate, a spout reach and a hole count were left out, because those three numbers decide most pull down purchases.

Each product below was read on its listing page, and only the specs printed on that page are used here. Where a page prints two different figures for the same measurement across finish variants, the article avoids the disputed figure and says so. Finishes named in each section are the finish of the listing that was read, not a claim about every finish a maker sells. Sale status was taken from the same pages: each one showed the model as available to order or in stock on the day it was read.

Kitchen faucets with pull down sprayer designs in detail

The six models below cover three reach bands and two flow rates. Read the docking notes closely, because a pull down wand that droops is the most common complaint with this faucet type, and each maker answers it with a different system that its page describes in its own words.

Moen Adler 87233SRS

The Adler is the shortest reach model in this group at 7-1/2 in, which suits single bowl sinks where a long spout would overshoot the bowl. The listing page prints a 14-9/16 in faucet height, an 8-5/16 in spout height and a 1.5 gpm flow rate, with a metal body in a Spot Resist Stainless finish.

The maker fits the Adler with its Reflex system, described on the page as giving smooth operation, easy movement and secure docking of the pull down spray head. Its Power Clean spray technology is described as providing 50 percent more spray power versus most Moen pulldown and pullout faucets without that technology. The spout swivels 360 degrees, the page lists 1 hole and 3 hole mounting, a deck plate is included, and the maximum deck thickness is printed as 2-1/2 in with a 3/8 in connection size.

The limit is reach. At 7-1/2 in the stream lands close to the back of the sink, so filling a pot set at the front edge of a deep double bowl means pulling the wand out more often. That is the trade for a compact footprint, and cooks with one medium bowl will rarely notice it.

  • Pros: shortest reach here, suits single bowl sinks
  • Pros: Reflex docking and Power Clean spray as the maker describes them
  • Cons: 7-1/2 in reach is tight over wide double bowls
  • Cons: 1.5 gpm flow is below the 1.8 gpm models in this group
  • Buy if: your sink is a single bowl and you want a docked wand that stays put
  • Skip if: you need the stream to land near the front of a wide sink

Delta Essa 9113-DST

The Essa prints the joint longest reach among the Delta models here at 9-1/4 in, with a 15-3/4 in faucet height and a flow rate of 1.8 gpm at 60 psi as printed on its listing page. The page lists a chrome finish over a metal body, a ceramic disc valve and a 1 or 3-hole 8 in installation with the deck plate included.

Delta describes its MagnaTite docking as using a powerful integrated magnet to snap the spray wand into place and hold it there so it does not droop over time. The page also lists Touch-Clean spray holes, which the maker describes as soft rubber holes that let you wipe away calcium and lime build-up with a finger, and DIAMOND Seal Technology with integrated InnoFlex PEX supply lines in the box. The high-arc gooseneck spout swivels 360 degrees and the hose is described as a 20-in retractable hose.

One caution: the spout height figure printed for this finish differs from the figure printed for another finish of the same model, so this guide does not quote an Essa spout height at all. The reach, height and flow figures above were consistent on the page read, and those are the numbers the comparison rests on.

  • Pros: 9-1/4 in reach and 1.8 gpm flow for wide sinks
  • Pros: magnetic docking and wipe-clean spray holes as the maker describes them
  • Cons: spout height is not quoted here because listings disagree on it
  • Cons: chrome is the finish read; other finishes are separate listings
  • Buy if: you want a long reach pull down with a magnetic dock
  • Skip if: you need a printed spout height before you order

Kohler Crue K-22973-BL

The Crue is the professional style entry, and it is tall: the listing page prints a 21-3/8 in faucet height with a 7-11/16 in spout height and a 9 in spout reach. The page describes a professional-style faucet with an easy-to-clean coated hose and a removable coil, a metal body and a matte black finish on the listing read.

Its sprayhead is a three-function pull down design with touch control, switching between stream, Sweep spray and Boost. The maker states that Boost technology increases the flow rate by 30 percent with the press of a button, on top of the printed 1.5 gpm base flow rate. Docking is the DockNetik magnetic system, the sprayhead swivels under the maker ProMotion technology name, and the MasterClean sprayface is described as withstanding mineral buildup so it wipes clean without cleaning products. The page also lists temperature memory, a ceramic disc valve, 1 hole and 3 hole mounting, a deck plate in the box and a maximum deck thickness of 2-1/2 in.

The limit is vertical room. A 21-3/8 in faucet under a wall cabinet or a low window sill can crowd the space above the sink, so measure the gap before choosing the professional style. The coil also gives the spout a working-kitchen look that will not suit every kitchen.

  • Pros: three spray functions including a Boost mode the maker rates at 30 percent more flow
  • Pros: tallest body here for filling stockpots at the sink
  • Cons: 21-3/8 in height needs clear space above the sink
  • Cons: spout height of 7-11/16 in is lower than the overall height suggests
  • Buy if: you cook with tall pots and like the professional coil style
  • Skip if: cabinets or a sill sit low over your sink

Moen Sleek 7864SRS

The Sleek keeps the modern single post look with a 15-9/16 in faucet height, an 8-5/16 in spout height and a 7-5/8 in spout reach, all printed on its listing page. Flow rate is printed as 1.5 gpm, the body is metal, and the finish read was Spot Resist Stainless, which the maker describes as resisting fingerprints and water spots.

Like the Adler, the Sleek pairs the Reflex docking system with Power Clean spray, and the page describes two delivery modes: an aerated stream for everyday cleaning and a powerful rinse for heavy-duty cleaning. The maker Duralock quick connect system is listed for installation, the spout is a high arc design that swivels 360 degrees, and the page states the faucet mounts on the sink or countertop through 1 or 3 holes with a deck plate included and a maximum deck thickness of 2-1/2 in.

The Sleek reach of 7-5/8 in is only slightly longer than the Adler, so the same single bowl advice applies. Buyers who want the stream to land mid-bowl on a large sink should look at the 9 in class instead.

  • Pros: clean single post styling with a high arc spout
  • Pros: Reflex docking and two spray modes as the maker describes them
  • Cons: 7-5/8 in reach is short over a double bowl sink
  • Cons: 1.5 gpm flow, below the Delta models here
  • Buy if: you want a modern look for a single bowl sink
  • Skip if: your sink is wide and you rinse at the front edge

Delta Trinsic 9159-DST

The Trinsic prints the longest spout reach in this group at 9-1/2 in, with a brass body, a 15-11/16 in faucet height and an 8-7/16 in spout height on its listing page. Flow rate is printed as 1.8 gpm, the valve is a ceramic disc, and the finish read was chrome.

Docking is MagnaTite magnetic docking, the spray holes are the Touch-Clean type, and the valve system is DIAMOND Seal Technology, which the maker describes as using a diamond embedded valve to reduce leak points and last twice as long as the industry standard. The page lists a 20-in retractable hose and also prints a 54 in hose length figure, a 360 degree swivel, and a maximum deck thickness of 2-1/2 in.

The fit note matters here: the characteristics on the page list a single installation hole, the description mentions a 1 or 3-hole 8 in installation, and the components list says the deck plate is not included, with an optional escutcheon sold separately. On a three hole sink you would need that separate escutcheon, so confirm the hole layout of your sink before ordering.

  • Pros: longest stated reach at 9-1/2 in, brass body
  • Pros: 1.8 gpm flow with magnetic docking
  • Cons: deck plate not included for three hole sinks
  • Cons: page prints both a 20-in retractable hose and a 54 in hose figure
  • Buy if: you have a one hole deck and a wide sink
  • Skip if: your sink has three holes and you do not want a separate escutcheon

Delta Lenta 19802Z-BL-DST

The Lenta is the matte black option with the longest included deck plate in this group: the page states it fits 1 or 3-hole installations with the included 10-3/4 in deck plate. Printed specs include a 16-1/4 in faucet height, a spout reach printed as 9-13/100 in, a 1.8 gpm flow rate and a maximum deck thickness of 2-1/2 in.

The body material is listed as zinc rather than brass or solid metal, and the valve is listed as a Diamond Coated Ceramic Disc. Delta ShieldSpray Technology is the headline feature: the maker describes it as using a concentrated jet to power away stuck-on messes with an average of 90 percent less splatter than a standard spray. MagnaTite docking, Touch-Clean spray holes and a 20-in retractable hose with a 360 degree swivel round out the page description.

The zinc body is the honest trade here. Buyers who rank body material first should note that the Trinsic above is listed with a brass body and the Moen and Kohler models with metal bodies, while the Lenta page prints zinc.

  • Pros: ShieldSpray mode as the maker describes it, for stuck-on food
  • Pros: long 10-3/4 in deck plate included for three hole sinks
  • Cons: zinc body where rivals list brass or metal
  • Cons: reach is printed as an unusual 9-13/100 in figure
  • Buy if: you want the spray technology and a matte black finish
  • Skip if: a brass or steel body is a firm requirement

Buying guide for kitchen faucets with pull down sprayer designs

A pull down faucet is a system of spout, hose, weight and dock, and the printed specs on a listing page tell you most of what ownership feels like. The checks below use only numbers and terms that appear on the pages of the models in this guide, so you can repeat them on any listing you read.

Match spout reach to bowl width

Spout reach is the horizontal distance from the faucet body to where the stream leaves the spout, and it decides where water lands in the bowl. The models here print reaches from 7-1/2 in to 9-1/2 in, a two inch spread that maps to the difference between a compact single bowl and a wide double bowl sink.

Measure from the faucet hole to the center of your bowl and compare it with the printed reach. A reach much shorter than that distance leaves the stream against the back wall of the bowl, while a much longer reach can overshoot a narrow bowl and splash the front edge.

Check spout height against your tallest pot

Spout height is the clear space under the spout, and it is always lower than the overall faucet height on a high arc model. The Crue prints a 21-3/8 in overall height but a 7-11/16 in spout height, while the Moen models print 8-5/16 in spout heights on shorter bodies, so compare spout height, not the headline height.

A pull down wand partly answers a low spout height because the head comes out of the spout and moves to the pot. Still, for filling a tall stockpot that sits in the bowl, the printed spout height is the number that tells you whether the pot fits under the stream.

Read the docking system description

Every maker in this group names its docking approach: Moen describes Reflex, Delta describes MagnaTite magnetic docking, and Kohler describes DockNetik magnetic docking. The shared point in the maker descriptions is that the wand should return to the spout and stay there instead of hanging loose as the hose ages.

When you read a listing, look for a named docking system and a stated hose length. The Delta pages here print a 20-in retractable hose figure, and the Moen Brantford class of hose is longer still in other groups, so hose figures vary and are worth comparing directly.

Compare flow rate and spray functions

Printed flow rates here split between 1.5 gpm and 1.8 gpm, both quoted by the pages at standard pressure. A higher printed flow fills pots faster, while spray functions change how that water is delivered: stream and spray modes are the baseline, and the Crue adds a Boost mode the maker rates at 30 percent more flow.

ShieldSpray on the Lenta and Power Clean on the Moen models are maker names for stronger spray delivery, each described in the maker wording quoted in the product sections. Judge them as spray shapes, not as extra flow, unless the page prints a higher gpm figure for the mode.

Confirm hole count and deck thickness

Most models here print 1 or 3 hole mounting with a deck plate included, but the Trinsic shows why you must read the components list: its deck plate is not included. Maximum deck thickness is printed as 2-1/2 in across this group, and plate length matters on three hole sinks, where the Lenta plate is 10-3/4 in.

Count the holes in your sink or counter before ordering, including any hole used by a separate sprayer or dispenser, and match that count against the installation line on the listing page rather than the product photo.

FAQ

These answers stick to the specs and maker descriptions printed on the listing pages used for this guide. Where pages disagree on a figure, the answer says so instead of picking one, and no figure below comes from anywhere else. That includes the flow rates, reaches and deck figures quoted throughout.

What is the difference between pull down and pull out sprayers?

A pull down wand pulls downward out of a high arc spout, while a pull out head pulls toward you from a lower spout. All six models in this guide are listed as pull down designs; the Kohler Purist in the companion undermount guide is an example of a pull out listing, printed with that wording on its page.

In practice the pull down format pairs with taller spouts and longer stated reaches, which is why the reaches here run from 7-1/2 in to 9-1/2 in.

Does a higher flow rate clean dishes better?

Flow rate is volume, printed here as 1.5 gpm or 1.8 gpm, and it mostly changes how fast a pot fills. Cleaning force comes from the spray shape: the maker descriptions for Power Clean and ShieldSpray talk about spray power and a concentrated jet, and the Crue Boost mode is the only one here with a printed flow increase, at 30 percent.

So compare gpm for filling speed and read the spray function list for cleaning claims, keeping each claim attached to the maker that printed it.

Will these faucets fit a three hole sink?

Five of the six models print 1 or 3 hole mounting, and all except the Trinsic list a deck plate as included on the page read. The Trinsic page lists the deck plate as not included and an optional escutcheon as sold separately, so a three hole install with that model needs the extra part.

The Lenta goes furthest on this point with an included deck plate printed at 10-3/4 in long, which is the figure to compare against your hole spacing.

What does maximum deck thickness mean?

It is the thickest counter or sink deck the mounting hardware can clamp, printed here as 2-1/2 in for every model in this group. A standard counter with an undermount sink usually falls well under that figure, while thick stone counters with a mounting board can approach it.

If your deck is thicker than the printed maximum, the shank and mounting nut may not reach, so measure the full stack of counter plus any underlayment before ordering.

Why do listings disagree on the same model?

Finish variants of one model can carry different spec tables, and the Essa in this guide is the working example: its spout height figure differs between finish listings, so the figure is not quoted. Reach, height and flow rate were consistent on the pages read, which is why the comparison rests on those numbers.

When two listings conflict on a number you care about, the maker specification sheet for the exact model and finish is the document to trust.

Conclusion

For most kitchens, the Delta Essa or Trinsic gives the longest stated reach with magnetic docking, the Kohler Crue suits tall-pot cooking, and the Moen Adler or Sleek fits smaller sinks. Check each model’s reach, spout height and hole count on its listing page before you buy, and match the deck plate to your sink.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.