Key takeaways
- Five guitar amps for mixers and PA systems compared on XLR and line outputs with cabinet emulation, USB recording interfaces, stereo outs and power options.
A guitar amp earns its place on a mixer when it can send its own tone to the desk without a microphone, so the guitar amps for mixers in this list all carry a maker-stated direct or line output, most with cabinet emulation, and several add a USB recording interface. Three are 100-watt stage combos and two are smaller amps for home and streaming.
Quick verdict
The Line 6 Catalyst 100 is the stage pick, with an XLR direct out and a 4-in, 4-out USB interface. The Fender Mustang GTX100 adds stereo XLR line outs and 200 presets. The BOSS Katana-100 MkII sends its direct tones over a line out and USB. The Yamaha THR30II Wireless and Positive Grid Spark 2 cover desks and streams.
- Stage XLR out: Catalyst 100, ground lift, 4-in, 4-out USB
- Stereo line outs: Mustang GTX100, two balanced XLR jacks
- Direct tones: Katana-100 MkII, mic’d cabinet emulation, Air Feel
- Desktop stereo: THR30II Wireless, 1/4-inch line outs, battery
- Home and streaming: Spark 2, stereo line outs, USB-C interface
How we selected
Every amp here had to state a direct connection to a mixer, PA or recording system on its own product page: an XLR direct out, a line output with cabinet or microphone emulation, or a USB audio interface. Amps that offer only a headphone socket, and amps whose pages never mention a mixer or recording output, were left out of this list.
The five split into two groups. The Catalyst 100, Mustang GTX100 and Katana-100 MkII are 100-watt combos built for stages, where the direct out feeds the house mixer while the speaker covers the stage. The THR30II Wireless and Spark 2 are desktop amps whose line outs and USB ports serve home recording, lessons and live streams.
Guitar amps for mixers: the five picks in detail
The table shows the connection that matters for this keyword: what each amp sends to a mixer, and how. Wattage and speaker size still matter for the stage side of the job, so they are listed too, along with the USB interface each amp offers for recording work.
| Product | Power | Speaker | Mixer output | USB | Weight |
|---|---|---|---|---|---|
| Line 6 Catalyst 100 | 100 W | 1×12 | XLR direct out, ground lift | 4-in, 4-out interface | 14.5 kg |
| Fender Mustang GTX100 | 100 W | 1×12 Celestion | Two balanced XLR line outs | Micro-USB recording | 22 lb |
| BOSS Katana-100 MkII | 100 W | 1×12 custom | 1/4-inch line out, cabinet emulation | Two-channel USB | 14.8 kg |
| Yamaha THR30II Wireless | 30 W stereo | Stereo desktop | Stereo 1/4-inch line outs | Class compliant interface | Not stated |
| Positive Grid Spark 2 | 50 W | 2×4-inch | Stereo 1/4-inch line outs | USB-C interface | Not stated |
Line 6 Catalyst 100
The Catalyst 100 is a 100-watt, dual-channel 1×12 combo built around six Original Amp Designs from Line 6’s HX work. For mixer duty it carries an XLR line output the maker describes as a pro connection to a PA or recording devices, with a ground lift on the direct out, plus a 4-in, 4-out USB audio interface for recording.
The maker’s guide calls the output an XLR direct output with cabinet emulation for a PA mixer or recording device, which is exactly the feed a sound engineer wants: the amp’s own cabinet sound, without a microphone in front of the speaker. On stage the combo still works as a normal amp, with a power attenuator offering full power, half power, 0.5 watts and mute. A Power Amp In through the effects loop return lets a modeler or preamp use the Catalyst as a powered speaker. The rest of the specification covers the working details: 18 effects plus six reverb types and a dedicated boost, MIDI over DIN or USB, a 3.5 mm aux input, a 1/4-inch headphone output, and the free Catalyst Edit app for Mac, PC, iOS and Android. The combo measures 564 x 262 x 487 mm and weighs 14.5 kg.
- XLR direct out with ground lift and cabinet emulation
- 4-in, 4-out USB audio interface
- 6 amp designs, 18 effects, 6 reverb types
- Power Amp In for modelers and preamps
- 564 x 262 x 487 mm, 14.5 kg
Fender Mustang GTX100
The Mustang GTX100 is Fender’s 100-watt modeling combo, with a 12-inch Celestion G12FSD-100 speaker, 40 amp models, 34 cabinet models and 73 effects stored across 200 preset slots. Its mixer connection is a pair of balanced XLR line outs, which Fender describes as stereo line outputs for interfacing with PA, recording and outboard gear.
Two balanced jacks matter because the GTX100’s effects run in stereo: a single mono feed would fold the stereo delays and reverbs down, while the pair hands the mixer the full image. A micro-USB port records the amp’s sound to a computer as a second route. The stereo effects loop takes outboard pedals after the preamp section, and the included GTX-7 seven-button footswitch switches presets and effects and activates the built-in 60-second looper. Wi-Fi handles product updates and the Fender Tone app, Bluetooth streams backing tracks, and a color display with an onboard tuner covers setup. The cabinet is open-backed wood, measuring 21 x 18 x 10 inches and weighing 22 lb, light for a 100-watt combo. Preset settings save per slot from the panel or the app, with only the master volume outside the preset system.
- Two balanced XLR line outs, stereo
- 40 amp models, 73 effects, 200 presets
- Micro-USB recording to computer
- GTX-7 footswitch and 60-second looper included
- 21 x 18 x 10 in, 22 lb
BOSS Katana-100 MkII
The Katana-100 MkII is a 100-watt combo with a custom 12-inch speaker and BOSS’s Tube Logic design. Its direct story is the strongest wording of the five: BOSS heads the feature Ready-to-Mix Direct Tones, with line, USB and phones/recording outputs carrying mic’d cabinet emulation to a PA system, a computer DAW or headphones.
The emulation on those outputs can be shaped with five Air Feel settings in BOSS Tone Studio, which also holds over 60 effects and the routing controls. The amp itself offers five characters, Clean, Crunch, Lead, Brown and Acoustic, each with a new variation, and five effects sections that run at once: Booster, Mod, FX, Delay and Reverb. Two-channel USB operation records in stereo. A rear Power Amp In bypasses the preamp and effects so a modeler can drive the Tube Logic power section directly, and Stereo Expand links a second Katana MkII for stereo rigs. Eight Tone Setting memories store full setups, and the Power Control switch offers standby, 0.5, 50 and 100 watts. The line out is a 1/4-inch jack, so it suits shorter runs to a nearby mixer or interface better than long stage cables. The amp measures 530 x 248 x 445 mm and weighs 14.8 kg.
- Line, USB and recording outputs with mic’d cabinet emulation
- Five Air Feel settings shape the direct sound
- 5 amp characters, 5 effects sections at once
- Power Amp In and Stereo Expand
- 530 x 248 x 445 mm, 14.8 kg
Yamaha THR30II Wireless
The THR30II Wireless is Yamaha’s desktop amp, 30 watts in stereo, built for the hours played at home rather than on stage. Among the THR-II range it is the model with line outputs: a stereo pair of 1/4-inch jacks that Yamaha says offer flexibility for recording and performance, which is the feed a small mixer or interface takes.
The amp models come from Yamaha’s Virtual Circuitry Modeling, with three banks of five guitar models plus a bass model, a mic model for acoustic-electrics and a flat voicing in each bank, and eight effects. A USB connection makes the amp a class compliant audio interface with no driver to install, and Cubase AI and Cubasis LE are bundled for recording. The wireless side is complete for a desktop: a built-in receiver works with the optional Line 6 Relay G10T transmitter, a rechargeable battery gives up to five hours of play, and Bluetooth covers audio playback and the THR Remote editor. Five user memory switches recall setups from the panel. On battery the output is 15 watts, and the line outs stay the route to a mixer when the little speakers are not enough for the room.
- Stereo 1/4-inch line outputs for recording and performance
- USB class compliant audio interface, no driver install
- 15 guitar amp models with VCM modeling
- Built-in wireless receiver and rechargeable battery
- Cubase AI and Cubasis LE bundled
Positive Grid Spark 2
The Spark 2 is a 50-watt smart amp with two 4-inch speakers angled for stereo spread, and its output set is aimed at home rigs that still feed other gear: a pair of stereo 1/4-inch line outputs, a headphone jack, and a USB-C port that turns the amp into an audio interface for a Mac or Windows computer.
Positive Grid’s own quickstart spells out the mixer wiring: two 1/4-inch cables give a stereo feed to a PA system, a mixer or an audio interface, and the L/Mono jack alone covers a mono feed. The amp runs HD amp models on a dedicated computational audio chip, with the Spark app holding over 100,000 tones and a Spark AI feature that proposes tones from a written description. Two loopers are built in, a simple looper and a groove looper with hundreds of drum tracks. Eight presets store on the amp in two banks. Bluetooth 5.0 streams music, Wi-Fi delivers firmware updates without a computer, and the optional Spark Battery gives up to 12 hours of play away from a socket. The maker rates output at 114 dB SPL RMS at one meter, with a frequency response of 20 to 20,000 Hz.
- Stereo 1/4-inch line outs, L/Mono for a single cable
- USB-C audio interface for Mac and Windows
- HD amp models, over 100,000 app tones
- Built-in loopers with drum tracks
- Optional battery for up to 12 hours
Buying guide
The right choice depends on where the mixer sits. A house desk at the back of a venue needs a balanced feed that survives a long cable run. A home interface two feet away needs none of that, but it does need the amp to behave as a recording device the moment a USB cable lands.
What outputs do guitar amps for mixers need?
Balanced XLR is the stage standard because it rejects hum over long runs and plugs straight into a mixer’s mic inputs. The Catalyst 100 offers one XLR direct out with a ground lift, and the Mustang GTX100 offers two XLR jacks for a stereo feed. Both keep the amp’s cabinet emulation in the signal, so the desk hears the finished tone.
Unbalanced 1/4-inch line outs, as on the Katana-100 MkII, THR30II Wireless and Spark 2, work well over short cables to a nearby interface, a stage box with direct inputs, or a personal mixer. The Katana adds a USB output with the same emulation, and all five amps can record over USB, which for home players is often the mixer connection that matters most.
Cabinet emulation and Air Feel: shaping the direct tone
A direct feed without cabinet emulation sounds harsh, because a guitar speaker rolls off the top end that a full-range PA reproduces. That is why the makers here build emulation into the output: Line 6 states cabinet emulation on the Catalyst’s direct out, and BOSS applies mic’d cabinet emulation to the Katana’s line, USB and headphone outputs.
BOSS goes one step further with five Air Feel settings in Tone Studio, which change the emulated microphone character of the direct sound. Fender takes the model route instead: the GTX100’s 34 cabinet models are part of each preset, so the line outs carry whichever cabinet the preset uses. In practice, save your mixer presets separately from your stage presets, since a tone voiced for a room rarely needs the same top end at the desk.
At soundcheck, tell the engineer which output you are using and whether it is mono or stereo before the first note, then play at full gig volume while the desk level is set. Mark your master volume position once the balance is right, and leave the amp there. If the room fills up and you need more stage level, a small move is fine on the amps here, but a large one changes what the audience hears through the PA balance the engineer built around your feed.
Stereo outs and stereo effects
Stereo matters when your sound uses stereo chorus, ping-pong delay or wide reverbs. The Mustang GTX100 and Spark 2 both provide a pair of line outputs, the THR30II Wireless provides a stereo pair, and the Katana records its stereo effects over two-channel USB. The Catalyst 100’s direct out is a single XLR, a mono feed, which suits most live desks.
Ask the venue before you plan a stereo rig: many house systems run mono, and a stereo feed summed at the desk can change how modulation effects sit. A mono-compatible preset, with stereo width kept modest, travels better. At home the calculation flips, since a stereo feed into an interface keeps the full effect image for recording and streaming.
Power Amp In and powered-speaker duty
Two of the stage combos can work in reverse. The Catalyst 100’s Power Amp In, through its effects loop return, lets a modeler or preamp use the combo as a powered speaker, and Line 6 lists the input in the spec list. The Katana-100 MkII’s Power Amp In bypasses its preamp and effects to reach the Tube Logic power section, with Power Control active.
This matters to players who already own a floor modeler: the same combo that sends its own tones to the mixer on one gig can amplify the modeler on the next, with the mixer feed then coming from the modeler itself. Check which device owns the direct feed in each setup, and keep one cabinet emulation in the chain, not two.
Wattage, attenuation and silent stages
A direct feed changes the wattage question. When the mixer carries the room, the amp’s speaker covers the stage, so attenuation becomes a tone tool: the Catalyst offers half power, 0.5 watts and mute, and the Katana’s Power Control offers 0.5, 50 and 100 watts plus standby. Mute and standby let the direct out work while the speaker stays quiet.
The desktop amps solve the same problem with size. The THR30II Wireless runs 30 watts in stereo and 15 on battery, and the Spark 2 is a 50-watt Class D design; both are voiced for rooms, not halls, and both lean on their line outs when a bigger system is present. Choose the stage combos when the speaker must still do real work, and the desktops when the feed is the product.
FAQ
These answers cover the questions players ask when an amp meets a mixing desk: microphones, long cables, recording and what happens to stage volume. Each answer follows the connections and features the makers state for the five amps in this list and the outputs they carry.
Can guitar amps for mixers replace a microphone on stage?
They can take over the microphone’s job of feeding the desk. The Catalyst 100’s XLR direct out and the Mustang GTX100’s balanced line outs carry the amp’s emulated cabinet sound straight to the mixer, and the Katana-100 MkII applies mic’d cabinet emulation to its line output for the same purpose.
What changes is the working method. A microphone captures the speaker in the room, including its position and the room itself; a direct feed is consistent from night to night and immune to spill from drums and other amps. Many engineers take both when channels allow, but for small stages and fast changeovers the direct feed alone is the practical choice these amps are built for.
Do these amps record to a computer as well?
Yes, all five record over USB. The Catalyst 100 works as a 4-in, 4-out audio interface, the Katana-100 MkII supports two-channel USB operation in stereo, the Mustang GTX100 records through its micro-USB port, the THR30II Wireless is a class compliant interface with no driver install, and the Spark 2 uses its USB-C port as an interface.
The USB route and the mixer route share the same emulated tone on the amps that state it, so a preset built for recording behaves the same at a desk. For a player who streams, the two desktop amps add the extras that matter: the THR30II’s battery and wireless receiver, and the Spark 2’s app tones and built-in loopers.
What cable does a 1/4-inch line out need to reach a mixer?
A standard instrument or line cable reaches a nearby mixer or interface, which covers home rigs and stage boxes with line inputs. For long runs to a house desk, a balanced output is the better tool: the Catalyst’s XLR and the Mustang’s XLR pair are made for that distance, and the Catalyst adds a ground lift switch for hum.
With the 1/4-inch outputs on the Katana, THR30II and Spark 2, keep the cable short and let the mixer’s own preamps or a direct box handle the long run if the venue needs one. The Spark 2’s L/Mono jack also covers the common case of a single available mixer channel: one cable, mono feed, no adapter.
Will the mixer feed change when I turn my amp up?
On these amps the direct feed is designed to stay steady while the speaker level moves. The Mustang GTX100 keeps its master volume outside the preset system and separate from the line output path, and the stage combos here are built so the player can ride stage volume without chasing the desk level all night.
The practical habit is to set the direct feed level during soundcheck, then work the master volume for the room. If your amp offers power attenuation, as the Catalyst and Katana do, use it to keep the speaker in its sweet spot at lower stage volumes while the mixer feed carries the audience.
Conclusion
For a stage, take the Catalyst 100 for its XLR direct out or the Mustang GTX100 for stereo XLR feeds, with the Katana-100 MkII close behind on direct-tone shaping. For a desk at home, the THR30II Wireless and Spark 2 send stereo line feeds and record over USB, which is what most home mixers ever ask of an amp.