Updated Nov 17, 2026· 18 min read

Key takeaways

  • Find the best dishwashers for short cabinets: ADA-height built-ins around 32 inches tall that fit under low counters, with quiet runs and full wash cycles.

Standard dishwashers stand about 34 inches tall, so they do not fit under lower counters. This guide rounds up the best dishwashers for short cabinets, focusing on ADA-height built-ins near 32 inches tall, slim 18-inch models, and the cutout size each model needs for a clean fit under a low counter.

Quick verdict

Seven models made the list, and six of them stand 32 to 32.5 inches tall. The Summit ADA family covers 18 and 24 inch widths in black, steel, and panel-ready finishes, while the EdgeStar adds a lighter 18-inch option. Pick by cutout height first, then by width.

Product Type Best for Key spec Main limit
Summit DW243BADA 24 in built-in Black kitchens 32.25 in H, 10 place Same specs as the steel version
Summit DW244SSADA 24 in built-in Steel kitchens 32.25 in H, 10 place Same specs as the black version
Summit DW245NTADA 24 in built-in, panel-ready Custom cabinets 32.25 in H, 10 place Panel and handle not included
Summit DW185SSADA 18 in built-in Narrow kitchens 32.25 in H, 8 place 8 place settings only
Summit DW2435SSADA 24 in built-in Large loads 32 in H, 12 place 49 dBA, louder than the rest
Summit DW186NTADA 18 in built-in, panel-ready Custom narrow kitchens 32.25 in H, 8 place Panel and handle not included
EdgeStar BIDW1802SS 18 in built-in Light install 32.5 in H, 62.8 lbs 52 dB, loudest here

How we selected

Every model here was checked against a page actually opened, mostly listing spec pages with full dimensions and stock status. The filter was height first: built-ins near 32 to 32.5 inches tall. Width, place settings, noise, and cycles separated models that were otherwise close.

The cutout height is the number that matters most. A standard built-in stands about 34 to 34.5 inches tall, so it will not slide under a lower counter or an ADA-height counter. Every model here stands 32 to 32.5 inches tall, and the listing pages state the height, the width, the depth, and the stock status for each one. The Summit ADA family was checked on Park Ave Appliance pages that list full specs and InStock status, and the EdgeStar was checked in its instruction manual.

Two models were left out on purpose. The Summit DW2435SS, without the ADA suffix, stands 34.5 inches tall, so it does not fit a short cabinet and is not on the list. Countertop models were also left out of the main list, since they need no cutout at all and answer a different question.

Best dishwashers for short cabinets

The seven models below are all built-ins that fit under low counters. Six come from the Summit ADA family in 18 and 24 inch widths, and one comes from EdgeStar. Compare the cutout height and width of each model with your cabinet before you choose. Height is the first filter.

Summit DW243BADA 24-Inch ADA Dishwasher, Jet Black Door

This Summit model is the black-door member of the ADA family, sized at 32.25 inches high for lower counters. The maker lists 10 place settings, 8 wash programs, and a 47 dBA sound level, with leveling legs that raise the unit to a standard 34 inch height.

The maker states that this model is ADA compliant with a height of 32.25 inches, a width of 23.5 inches, and a depth of 22.5 inches, so it fits a 24-inch cutout that is too low for a standard machine. The maker also states 10 place settings, 8 wash cycles, 5 auxiliary functions, a 47 dBA sound rating, 260 kWh per year, and a net weight of 95 lbs. The interior is stainless steel, the racks are adjustable, and the unit has 2 spray arms with a stainless steel spray arm and a stainless steel filter. The door is jet black with a curved handle, and the controls are electronic touch pad with a child lock.

The delay start reaches 19 hours, so a load can be set to run overnight, and the leveling legs extend from the 32.25-inch base height to 34 inches, which covers counters that sit between ADA height and standard height. The built-in water softener and the 5 auxiliary functions cover hard water and heavy soil, and the adjustable upper rack fits tall glasses under the cutout. The listing page lists InStock status, which means the model is currently sold and not a discontinued listing.

Best for: kitchens with black appliances and a cutout near 32.25 inches high.

Skip if: you want a stainless steel door, since the DW244SSADA matches this model on every spec except the finish.

Summit DW244SSADA 24-Inch ADA Dishwasher, Stainless Steel Door

This Summit model matches the black-door version on size and cycles, but it wears a stainless steel door with a horizontal grain. The maker lists the same 32.25 inch height, 10 place settings, and 47 dBA sound level, with the same 8 wash programs. It suits kitchens with steel appliances.

The maker states a height of 32.25 inches, a width of 23.5 inches, and a depth of 22.5 inches, with 10 place settings, 8 wash cycles, 5 auxiliary functions, a 47 dBA sound rating, 260 kWh per year, and a net weight of 95 lbs. The interior is stainless steel, the racks are adjustable, and the unit has 2 spray arms with a stainless steel spray arm and a stainless steel filter. The door is stainless steel with a horizontal grain and a curved handle, and the controls are electronic touch pad with a child lock.

The delay start reaches 19 hours, and the leveling legs extend from the 32.25-inch base height to 34 inches, so the same unit can sit under an ADA counter or a standard counter. The built-in water softener and the 5 auxiliary functions cover hard water and heavy soil, and the adjustable upper rack fits tall glasses under the cutout. The listing page lists InStock status.

Best for: kitchens with stainless steel appliances and a cutout near 32.25 inches high.

Skip if: you want a black door, since the DW243BADA matches this model on every spec except the finish.

Summit DW245NTADA 24-Inch ADA Dishwasher, Panel Ready

This Summit model is the panel-ready version of the same ADA dishwasher, with an unfinished door that takes your own panel and handle. The maker lists the same 32.25 inch height, 10 place settings, and 47 dBA sound level in a fully integrated design.

The maker states a height of 32.25 inches, a width of 23.5 inches, and a depth of 21.75 inches, with 10 place settings, 8 wash cycles, 5 auxiliary functions, a 47 dBA sound rating, 260 kWh per year, and a net weight of 95 lbs. The interior is stainless steel, the racks are adjustable, and the unit has 2 spray arms with a stainless steel spray arm and a stainless steel filter. The door is panel-ready with an unfinished door and no handle, so a custom panel and handle are needed, and the unit is fully integrated.

The delay start reaches 19 hours, and the leveling legs extend from the 32.25-inch base height to 34 inches. The built-in water softener and the 5 auxiliary functions cover hard water and heavy soil, and the adjustable upper rack fits tall glasses under the cutout. The shallower 21.75-inch depth leaves more room behind the unit for hoses and wiring in a tight cutout. The listing page lists InStock status.

Best for: kitchens where the dishwasher door must match the cabinet fronts.

Skip if: you do not want to order a panel and a handle, since the DW243BADA and the DW244SSADA come with finished doors.

Summit DW185SSADA 18-Inch ADA Dishwasher, Stainless Steel Door

This Summit model squeezes the same ADA height into an 18 inch wide body for narrow kitchens. The maker lists 8 place settings, 8 wash programs, and a 47 dBA sound level, with a stainless steel door and a curved handle in brushed steel. It fits apartments and small kitchens best.

The maker states a height of 32.25 inches, a width of 17.75 inches, and a depth of 22.5 inches, with 8 place settings, 8 wash cycles, 5 auxiliary functions, a 47 dBA sound rating, 250 kWh per year, and a net weight of 95 lbs. The interior is stainless steel, the racks are adjustable, and the unit has 2 spray arms with a stainless steel spray arm and a stainless steel filter. The door is stainless steel with a curved handle in brushed steel, and the controls are electronic touch pad with a child lock.

The delay start reaches 19 hours, and the leveling legs extend from the 32.25-inch base height to 34 inches, so the unit can sit under an ADA counter or a standard counter. The built-in water softener and the 5 auxiliary functions cover hard water and heavy soil, and the adjustable upper rack fits tall glasses under the cutout. The narrower 17.75-inch width fits a cutout where a 24-inch model will not go. The listing page lists InStock status.

Best for: narrow kitchens and apartments with an 18-inch cutout near 32.25 inches high.

Skip if: you need 10 or 12 place settings, since the 24-inch models hold more.

Summit DW2435SSADA 24-Inch ADA Dishwasher, Front Controls

This Summit model holds 12 place settings in the same low body, the largest capacity in this list. The maker lists a 32 inch height, a 49 dBA sound level, and 5 cycles, with a 35-minute Quick Wash and a 58-minute Quick and Dry setting. Front controls make it easy to run.

The maker states a height of 32 inches, a width of 23.63 inches, and a depth of 22.5 inches, with 12 place settings, 5 wash cycles, a 49 dBA sound rating, 234 kWh per year, and a net weight of 95 lbs. The interior is stainless steel, the racks are adjustable, and the unit has 2 spray levels with a stainless steel spray arm and a stainless steel filter. The door is stainless steel, the controls are front controls with a child lock, and the cutout height is 32 1/8 inches.

The 5 cycles include Pots and Pans, Normal, Quick Wash, Quick and Dry, and Rinse, with Quick Wash taking 35 minutes and Quick and Dry taking 58 minutes. The delay start reaches 24 hours, and the leveling legs extend from the 32-inch base height to 34 inches. The built-in water softener covers hard water, and the InnerClean setting cleans the machine itself. The listing page lists InStock status.

Best for: families that need 12 place settings under a low counter.

Skip if: you want the quietest run, since 49 dBA is louder than the 47 dBA of the other Summit models here.

Summit DW186NTADA 18-Inch ADA Dishwasher, Panel Ready

This Summit model is the 18 inch panel-ready version of the ADA family, with an unfinished door for a custom panel. The maker lists 8 place settings, 8 wash programs, and a 47 dBA sound level, in the same 32.25 inch high body as the steel version here.

The maker states a height of 32.25 inches, a width of 17.75 inches, and a depth of 22.5 inches, with 8 place settings, 8 wash cycles, 5 auxiliary functions, a 47 dBA sound rating, 250 kWh per year, and a net weight of 95 lbs. The interior is stainless steel, the racks are adjustable, and the unit has 2 spray arms with a stainless steel spray arm and a stainless steel filter. The door is panel-ready with an unfinished door and no handle, so a custom panel and handle are needed, and the unit is fully integrated.

The delay start reaches 19 hours, and the leveling legs extend from the 32.25-inch base height to 34 inches. The built-in water softener and the 5 auxiliary functions cover hard water and heavy soil, and the adjustable upper rack fits tall glasses under the cutout. The narrower 17.75-inch width fits a cutout where a 24-inch model will not go, and the panel-ready door matches custom cabinets. The listing page lists InStock status.

Best for: narrow kitchens with custom cabinets and an 18-inch cutout near 32.25 inches high.

Skip if: you do not want to order a panel and a handle, since the DW185SSADA comes with a finished steel door.

EdgeStar BIDW1802SS 18-Inch Built-In Dishwasher, Stainless Steel

This EdgeStar model is the only non-Summit pick here, and it brings a lighter body at 62.8 lbs. The manual lists 8 place settings, 6 cycles, and a 52 dB noise level, with a cutout of 32.5 inches high by 17.75 inches wide by 23 inches deep. It suits renters and small kitchens.

The instruction manual states a unit size of 32.5 inches high by 17.63 inches wide by 22.44 inches deep, with a cutout of 32.5 inches high by 17.75 inches wide by 23 inches deep. The manual also states 8 place settings, 6 cycles, 3 options, a 52 dB noise level, a net weight of 62.8 lbs, a 120V supply, and a 6.67A current. The cycles are Heavy, Normal, ECO, Glass, Rapid, and Rinse, and the options are Sanitize, Hi Temp, and Heated Dry.

The delay start reaches 24 hours, and the unit has a leak sensor that stops the water if a leak is found. The interior is stainless steel, the racks are 2 racks with a silverware basket and a cup tray, and the door is stainless steel. The lighter 62.8 lb weight makes it easier to slide into a tight cutout than the 95 lb Summit models, and the 32.5-inch height fits a cutout that is a little taller than the Summit ADA cutout. One listing page lists the height as 32.0 inches, against 32.5 inches in the manual, and the manual figure is used here.

Best for: renters and small kitchens that need a lighter 18-inch model for a 32.5-inch cutout.

Skip if: you want the quietest run, since 52 dB is the loudest figure on this list.

Buying guide

Five points decide a good fit under a short cabinet: the cutout size, the height, the width, the legs, and the noise. Work through them in order, and the right model will stand out before you order. Start with a tape measure and a level. The numbers do the choosing.

How to measure a short cabinet cutout in the best dishwashers for short cabinets

Measure the cutout height, width, and depth before you order, because a dishwasher that is even a quarter inch too tall will not slide in. Measure at the front and the back of the opening, and use the smallest number you find. Check the door swing too.

Measure the height from the floor to the underside of the counter at the front, in the middle, and at the back, because floors and counters are rarely level. Use the smallest height you find, and compare it with the cutout height the maker states. The Summit ADA models here need a cutout of 32.25 inches high, and the EdgeStar needs a cutout of 32.5 inches high. Measure the width at the top and the bottom of the opening, and check that the depth leaves room for the hoses and the drain behind the unit.

Open the door of the current unit, if there is one, and check that the door clears the floor and the kickplate when it drops down. A panel-ready door adds thickness, so measure with the panel in mind. Write the three numbers down and keep them with you when you order, since a guess of 34 inches for a 32-inch opening is the most common mistake.

ADA height and what 32 inches means

ADA height means a dishwasher built to fit under a lower counter, usually near 32 to 32.5 inches tall. Standard built-ins stand near 34 to 34.5 inches, so they will not fit the same opening. The 2 inch gap is the whole point of an ADA model. Check the cabinet height first.

The ADA height standard comes from counters built lower for wheelchair access, but the same height suits older kitchens, apartments, and homes with a lowered counter run. The Summit ADA models here stand 32 or 32.25 inches tall, and the EdgeStar stands 32.5 inches tall. Leveling legs on the Summit models extend from the base height to 34 inches, so one unit can sit under a low counter now and under a standard counter later if the kitchen is rebuilt.

Do not confuse an ADA model with a slim model. Slim means narrow, usually 18 inches wide, while ADA means low, usually near 32 inches tall. A model can be both, like the 18-inch Summit ADA models here, or only one, like the 24-inch Summit ADA models. Check both numbers on the spec page before you order.

Slim 18-inch models for narrow kitchens

An 18 inch model fits a narrow cutout where a 24 inch machine will not go, and it still holds 8 place settings. It suits apartments, small kitchens, and homes with a second dishwasher in a bar or pantry. The trade-off is capacity, not cleaning power.

Three models on this list are 18 inches wide: the Summit DW185SSADA, the Summit DW186NTADA, and the EdgeStar BIDW1802SS. Each holds 8 place settings, which covers a day of dishes for one or two people, and each has an adjustable upper rack for tall glasses. The Summit 18-inch models run at 47 dBA with 8 wash programs, while the EdgeStar runs at 52 dB with 6 cycles. A narrow model still washes pots and pans in the lower rack, but it will not hold a full day of dishes for a family of four.

Measure the width of the cutout before you pick an 18-inch model, since a 24-inch opening with a low counter needs a 24-inch ADA model, not a narrow one. An 18-inch model in a 24-inch opening leaves a gap that needs a filler panel. If the cutout is 18 inches wide and 32 inches high, one of the three narrow models here is the right pick.

Leveling legs and door clearance

Leveling legs let a low dishwasher rise to meet a standard counter, and they also level the machine on an uneven floor. The Summit models here rise from 32.25 inches to 34 inches with the legs extended. Check the door swing and the kickplate gap before you order.

The Summit ADA models list leveling legs that extend from the base height to 34 inches, which means the same unit fits a low counter today and a standard counter after a remodel. Turn the legs to raise the unit, and check the height with a level before the unit is pushed in. The EdgeStar manual states a fixed height of 32.5 inches and does not list leveling legs, so the cutout must match its height as stated.

Check the door clearance too. The door drops down to load the lower rack, and it needs room to swing without hitting the floor or the kickplate. A panel-ready door is thicker than a steel door, so it needs a little more room. Check the kickplate gap after the unit is leveled, and leave enough room for the door to open flat.

Noise and cycles in a low dishwasher

A low dishwasher is no louder than a standard one, and most models here run at 47 to 49 dBA. The Summit models list 8 wash programs, while the 12-place model lists 5. Pick the cycle set that matches your loads, not the longest list. Quiet matters most in open kitchens.

Six of the seven models here run at 47 or 49 dBA, which is quiet enough for an open kitchen or a small apartment. The EdgeStar runs at 52 dB, which is louder, but still far from the 60 dB of older machines. Noise is measured on the standard cycle, so a heavy cycle may run louder for a short time. If the kitchen opens onto the living room, pick a 47 dBA model.

Cycles matter more than noise for most homes. The Summit models list 8 wash programs, which cover heavy soil, normal loads, glass, and rinse, while the 12-place Summit lists 5 cycles with a 35-minute Quick Wash and a 58-minute Quick and Dry setting. The EdgeStar lists 6 cycles with Sanitize, Hi Temp, and Heated Dry options. Pick the cycle set that matches your loads, and check that the model has a sanitize option if you need one.

Frequently asked questions

These questions cover the fit, the height, and the size of a low dishwasher. Each answer uses the dimensions and figures from the pages opened for this guide. A tape measure settles most of them in a minute. Measure the cutout before you read the rest.

Can a standard dishwasher fit a short cabinet

No, a standard dishwasher stands about 34 inches tall, so it will not fit under a lower counter. You need an ADA-height model near 32 inches tall, or a countertop model that needs no cutout at all. Measure the opening before you order. A quarter inch is enough to block the fit.

A standard built-in needs a cutout of about 34 inches high, and forcing it into a 32-inch opening will damage the counter and the machine. The Summit ADA models here stand 32 or 32.25 inches tall, and the EdgeStar stands 32.5 inches tall, so they fit the opening a standard model cannot. If the cutout is between 32 and 34 inches, the leveling legs on the Summit models can raise the unit to meet the counter.

How tall is an ADA dishwasher

An ADA dishwasher stands about 32 to 32.5 inches tall, against about 34 to 34.5 inches for a standard built-in. The Summit models here stand 32 or 32.25 inches tall, and the EdgeStar stands 32.5 inches tall. Leveling legs can raise them to 34 inches.

The exact height depends on the model. The Summit DW2435SSADA stands 32 inches tall with a cutout of 32 1/8 inches, the other Summit ADA models stand 32.25 inches tall, and the EdgeStar BIDW1802SS stands 32.5 inches tall. Check the spec page for the model you want, since the height is the number that decides the fit.

Do I need a panel-ready model

No, a panel-ready model is only needed when you want the dishwasher door to match the cabinets exactly. A steel or black door looks fine in most kitchens, and it costs less than a custom panel and handle. Pick the finish that suits the room. The panel and handle come from your cabinet maker.

Two models on this list are panel-ready: the Summit DW245NTADA in 24 inches and the Summit DW186NTADA in 18 inches. Both have an unfinished door with no handle, so you order a panel and a handle to match the cabinets. If you do not want that work, the DW243BADA, the DW244SSADA, and the DW185SSADA come with finished doors in black or steel.

What if my cutout is under 32 inches

If the cutout is under 32 inches, no built-in dishwasher on this list will fit, and you should look at a countertop model instead. A countertop unit needs no cutout at all, and it hooks to the tap. Measure again before you rule out a built-in. A drawer model may fit if the height allows.

Measure the height at the front, in the middle, and at the back of the opening, and use the smallest number. If the smallest height is under 32 inches, a built-in will not fit, and a countertop model is the safer pick. A countertop unit sits on the counter and hooks to the tap, so it needs no cutout. A drawer dishwasher may also fit, since a single drawer is shorter than a full built-in, but check its height on the spec page first.

Are 18-inch dishwashers too small

No, an 18 inch dishwasher holds 8 place settings, which covers a day of dishes for one or two people. It washes pots and pans in the lower rack, and it fits a narrow cutout where a 24 inch model cannot go. Families need a 24 inch model instead. Check the rack layout before you decide.

Three models on this list are 18 inches wide, and each holds 8 place settings with an adjustable upper rack. That covers a day of dishes for one or two people, but it will not hold a full day of dishes for a family of four. If you cook for four or more, pick a 24-inch model like the DW243BADA or the DW2435SSADA, which hold 10 or 12 place settings.

Conclusion

The right pick is the one that fits the cutout you measured, not the largest model on the list. A 32 inch tall built-in with the width your kitchen allows will wash full loads quietly. Measure twice, then order once. That is the whole job: measure, match, and install. The seven models above cover 18 and 24 inch widths.

Measure the cutout height, width, and depth first, then pick a model near 32 inches tall with the width your kitchen allows. The Summit ADA family covers 18 and 24 inch widths in black, steel, and panel-ready finishes, and the EdgeStar adds a lighter 18-inch option. Check the leveling legs and the door clearance before you order, and the right fit will wash full loads quietly and leave the counter line clean.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.