Updated Nov 17, 2026· 16 min read

Key takeaways

  • Find the best Oasis bottom load water coolers for hot and cold drinking water. Compare bottom load models, outputs, bottle sizes and fit before you choose one.

A heavy bottle lifted overhead is the main drawback of a top load cooler, and a bottom load design removes that step. This guide covers the best Oasis bottom load water coolers with hot and cold output, clear bottle sizes, and honest limits, so you can match a model to a kitchen, break room, or small office without guesswork.

Quick verdict

The strongest all round choice in this group is the Oasis Aquarius BAEB1SHSK, because its published output, tri-temp dispensing, and clear bottle fit cover the widest range of home and office use. The Mirage models suit rooms where a compact cabinet matters, while the Maxxfill Flex suits buyers who may later add a water line.

Product Type Best for Key spec Main limit
Oasis Aquarius BAEB1SHSK Bottom load bottled Home and office daily use Hot 0.9 gal per hour; cold 0.7 gal per hour Cold output is modest for heavy use
Oasis Mirage MIR311D BLK Bottom load convertible Compact break rooms Hot 45 x 6 oz cups per hour Shared spec sheet with the white model
Oasis Mirage MIR301D WHI Bottom load convertible Light rooms and kitchens Hot 45 x 6 oz cups per hour Shared spec sheet with the black model
Oasis Maxxfill Flex BXM1SHS Convertible bottom load Flexible bottled or plumbed use Cold 1.7 gal per hour Hot output is lower than cold output
Oasis Danu BXM1CRSHSY Convertible contactless Shared spaces and tall bottles Dispense height 320 mm Input power is 220-240V, 50/60 Hz
Oasis 307BLB Bottom load bottled Simple home use Accepts 10, 19 or 20 litre bottles Dimensions and power are not stated
Oasis INOX-BL Bottom load bottled Workplaces that want a steel look Accepts 10, 19 or 20 litre bottles Dimensions and power are not stated

How we selected

Selection started with maker pages and manuals for Oasis bottom load models, then added listing pages that named the same models and described the same bottom load layout. A model stayed in the group only when an opened page named it as a bottom load or convertible bottom load cooler and gave at least one usable fact.

Models that were top load only, bottleless only, or countertop only were left out, even when they carried the Oasis name. Published specifications were the main source for comparison, and where a page gave no figure, the article says so instead of filling the gap with a guess.

Best Oasis bottom load water coolers in detail

This section looks at each model in turn, with the same questions for every pick: who it suits, why it fits a bottom load search, what the published specifications list, where it falls short, and when to buy it or pass on it. Read the limits with the same care as the strengths, because a small limit can matter more than a strong output figure.

Oasis Aquarius BAEB1SHSK bottom load water cooler

The Aquarius BAEB1SHSK is the most complete bottom load pick in this group, with tri-temp dispensing and a clear set of published output figures. It suits a home kitchen, a small office, or a shared break room where several people want hot, cold, and room temperature water from one dispense point.

The maker manual names it as a bottom load bottled water dispenser, model BAEB1SHSK, and describes a bottle placed upright in the lower cabinet with a pump drawing water up to the dispenser. The maker lists rated voltage as 115V at 60Hz, heating power as 420W, and cooling power as 90W at 1.5A. Hot water output is listed as 0.9 gal per hour, also given as 3.5 L, and cold water output is listed as 0.7 gal per hour, also given as 2.5 L. Hot water temperature range is listed as 165 degrees F to 194 degrees F, with 73.9 degrees C to 90 degrees C also given, and coolant is listed as R134a at 36g.

The manual states that the dispenser is for use with 3 or 5 gallon water bottles, also given as 12 or 19 liter bottles. First use needs at least 1 hour for cold water and 15 minutes for hot water. Cleaning is listed as every 6 months, with at least 6 in of clearance in back and on both sides, also given as 15 cm.

  • Tri-temp output covers hot, cold, and room temperature water.
  • Hidden bottle in the lower cabinet avoids overhead lifting.
  • Separate switches allow hot water to be turned off when not needed.
  • Cold output is modest for heavy shared use.
  • First cold water takes at least 1 hour after setup.
  • Needs a grounded GFCI outlet and 6 in of clearance.

Buy this model if you want one bottom load cooler that covers hot, cold, and room temperature water, with a clear manual and a hidden bottle. Skip it if your main need is a high cold water rate for back to back large fills, or if you cannot give the unit the clearance and the grounded outlet the manual asks for.

Oasis Mirage MIR311D BLK in black

The black Mirage MIR311D BLK suits a break room or office kitchen where a dark cabinet blends with other equipment and where a compact floor unit is wanted. It is a tri-temp model, so it covers hot, cold, and room temperature water, and its bottom load layout keeps a full bottle low in the cabinet.

The maker spec sheet names the black Mirage as model MIR311D BLK and describes bottom load access that removes the need to lift heavy bottles. It also lists conversion to point of use use with included parts, so the unit can later be plumbed to a water line. The maker lists dimensions as W 12 in x D 12 1/2 in x H 40 3/8 in, and approximate net weight as 37 lbs. Electrical supply is listed as 115 volts at 60 Hertz, with a water cooler compressor of 1/20 hp. The one piece hot water tank has a 500 watt heating element, and hot water capacity is listed as 45 x 6 oz cups of piping hot water per hour, with a 1 1/2 quart storage tank.

The cold water reservoir and the hot tank are listed as Type 300 series stainless steel. The drip tray lifts out and is listed for dishwasher use. The Mirage manual states that the unit is for use with 3 or 5 gallon water bottles, also given as 12 or 19 liter bottles, and cleaning is listed as every 4 months.

  • Compact cabinet fits a small break room corner.
  • Hot output of 45 x 6 oz cups per hour suits frequent hot drinks.
  • Stainless steel reservoir and hot tank are listed by the maker.
  • Shares most published specs with the white Mirage model.
  • Cold water rate in gallons per hour is not stated on the opened sheet.
  • Cold thermostat needs a careful setting to avoid ice build up.

Buy this model if you want a compact black bottom load cooler with strong hot output and the option to convert to a plumbed supply later. Skip it if you want a white cabinet, or if you need a stated cold water rate in gallons per hour before you choose.

Oasis Mirage MIR301D WHI in white

The white Mirage MIR301D WHI suits a light kitchen, a clinic waiting area, or a small office where a white cabinet looks cleaner against pale walls and cabinets. It shares the Mirage layout with the black model, so the choice between the two is mainly about room color and light, not about a different water system.

The same maker spec sheet names the white Mirage as model MIR301D WHI and describes bottom load access that removes the need to lift heavy bottles. It lists the same tri-temp range of hot, cold, and room temperature water, and the same conversion to point of use use with included parts. Dimensions are listed as W 12 in x D 12 1/2 in x H 40 3/8 in, with approximate net weight of 37 lbs, electrical supply of 115 volts at 60 Hertz, and a compressor of 1/20 hp. The one piece hot water tank has a 500 watt heating element, and hot water capacity is listed as 45 x 6 oz cups per hour, with a 1 1/2 quart storage tank.

The cold water reservoir and the hot tank are listed as Type 300 series stainless steel. The drip tray lifts out and is listed for dishwasher use. The Mirage manual states that the unit is for use with 3 or 5 gallon water bottles, also given as 12 or 19 liter bottles, and cleaning is listed as every 4 months.

  • White cabinet suits light kitchens and waiting areas.
  • Hot output of 45 x 6 oz cups per hour suits frequent hot drinks.
  • Stainless steel reservoir and hot tank are listed by the maker.
  • Shares most published specs with the black Mirage model.
  • Cold water rate in gallons per hour is not stated on the opened sheet.
  • Cold thermostat needs a careful setting to avoid ice build up.

Buy this model if you want the Mirage layout in white, with strong hot output and a compact cabinet for a light room. Skip it if you prefer a dark cabinet, or if you need a stated cold water rate before you choose.

Oasis Maxxfill Flex BXM1SHS convertible model

The Maxxfill Flex BXM1SHS suits a buyer who wants a bottom load cooler now and the option to move to a plumbed supply later without buying a new unit. It is a hot and cold model with a strong cold rate, and it fits a home office or a small workplace that may change its water supply in time.

The maker manual names it as model BXM1SHS and as a convertible bottom load and point of use hot and cold water dispenser. It describes a bottle placed upright in the lower cabinet with a pump drawing water up to the dispenser. The maker lists rated voltage as 115V at 60Hz, heating power as 460W, and cooling power as 95W at 1.5A. Hot water output is listed as 0.9 gal per hour, also given as 3.5 L, and cold water output is listed as 1.7 gal per hour, also given as 6.5 L. Hot water temperature range is listed as 165 degrees F to 194 degrees F, and coolant is listed as R134a at 43g.

The manual states that the dispenser is for use with up to 5 gallons of water, also given as 19 liters. It asks for at least 6 in of clearance in back and on both sides, with 15 cm also given, and for a grounded GFCI outlet. Cleaning is listed as every 6 months. First use needs at least 1 hour for cold water and 15 minutes for hot water.

  • Cold output of 1.7 gal per hour is the highest stated cold rate here.
  • Convertible design can use a bottle or a direct water line.
  • Hot temperature range is stated as 165 to 194 degrees F.
  • Hot output is lower than cold output.
  • Needs a grounded GFCI outlet and 6 in of clearance.
  • First cold water takes at least 1 hour after setup.

Buy this model if cold output matters most to you and if you want the option to switch to a plumbed supply later. Skip it if hot output is your main need, or if you want a room temperature button as well as hot and cold.

Oasis Danu BXM1CRSHSY contactless model

The Danu BXM1CRSHSY suits a shared space where many hands use the same cooler and where a contactless dispense action is wanted. It also suits a room where tall sports bottles and carafes are filled often, because the maker lists a large dispense height and an open sided alcove.

The maker technical sheet names it as model BXM1CRSHSY and describes it as a convertible mains fed and bottled water cooler, available in hot and cold only. A separate maker catalogue describes the same Danu line as usable as a mains fed cooler or as a bottom load bottled cooler, with a front door panel for access to filters or a water bottle. The maker lists dimensions as 1080 mm high x 310 mm wide x 380 mm deep, and dispense height as 320 mm. Weight is listed as 17 Kg. Input power is listed as 220-240V at 50/60 Hz, total current as 2.5 Amps, and power consumption as 600 Watts.

Cooling performance is listed as below 10 degrees C, at 21 degrees C ambient and 7.6 LPH. Tank capacity is listed as a cold tank of 2.9L and a total reservoir of 4.15L. Heating performance is listed as 5 LPH. Activation is listed as contactless, and drainage is listed as a removable drip tray that is listed for dishwasher use.

  • Contactless activation suits shared spaces.
  • Dispense height of 320 mm fits tall bottles and carafes.
  • Cold tank of 2.9L and total reservoir of 4.15L are stated.
  • Input power is 220-240V, 50/60 Hz, not 115V.
  • Hot and cold only, with no room temperature option listed.
  • Filter and disinfection options are listed as optional.

Buy this model if you are in a region with 220-240V power, you want contactless dispensing, and you fill tall bottles often. Skip it if you need a 115V unit for a United States home or office, or if you want a room temperature option.

Oasis 307BLB for simple bottle changes

The Oasis 307BLB suits a home or small shop where the main need is a simple bottom load cooler without extra modes or a convertible water line. It is the most direct pick in this group, and its value is in the bottle layout rather than in a long list of extra features.

The listing page names it as the Oasis 307BLB bottom load bottle cooler and describes it as a bottom bottle cooler that combines the conveniences of bottom bottle coolers. The bottle is placed low in the unit, so a buyer does not need to lift a full bottle overhead to load it. The listing page for bottled coolers states that all Oasis bottled water coolers accept standard bottled water containers of 10, 19 or 20 litres. The same page states that a bottled cooler works with bottled water, gives cold and hot water all day, and needs no connection to the water network.

The listing describes the 307BLB as a new bottom bottle model, but it does not state dimensions, power, tank sizes, or output rates on the opened page. The page also lists a low noise compressor, durable tanks, and CE, TUV, and RoHS certifications for the bottled range, as range level context rather than model level figures.

  • Bottom load layout keeps bottle changes low.
  • Accepts 10, 19 or 20 litre bottles listed on the page.
  • Dimensions and power are not stated on the opened page.
  • Hot and cold output rates are not stated on the opened page.
  • Tank sizes are not stated on the opened page.

Buy this model if you want a simple bottom load cooler, you already use 10, 19, or 20 litre bottles, and you are happy to confirm the missing figures with the seller before you buy. Skip it if you need a stated hot or cold rate, a stated dimension, or a convertible water line option before you choose.

Oasis INOX-BL in black stainless style

The Oasis INOX-BL suits a workplace or shop where a steel look matters and where the cooler will be seen by visitors. It is a bottom load model with a robust look, and it fits a room where a plain white cabinet would look out of place next to steel counters and dark furniture.

The listing page names it as the Oasis INOX-BL bottom load bottle water cooler in black, and describes it as a bottom down loading model. The listing states that it gives the convenience of connecting the water bottle to the bottom of the unit, which is the core bottom load layout. The listing page for bottled coolers states that all Oasis bottled water coolers accept standard bottled water containers of 10, 19 or 20 litres. The same page states that a bottled cooler works with bottled water, gives cold and hot water all day, and needs no connection to the water network.

The listing describes the INOX-BL as a robust model with an austere classic line, ideal for bringing style to a business. That description is about look rather than output. The opened page does not state dimensions, power, tank sizes, or output rates for this model. The page also lists a low noise compressor, durable tanks, and CE, TUV, and RoHS certifications for the bottled range.

  • Bottom load layout keeps bottle changes low.
  • Black stainless style suits workplaces and shops.
  • Accepts 10, 19 or 20 litre bottles listed on the page.
  • Dimensions and power are not stated on the opened page.
  • Hot and cold output rates are not stated on the opened page.
  • Tank sizes are not stated on the opened page.

Buy this model if you want a bottom load cooler with a steel look for a workplace, you already use 10, 19, or 20 litre bottles, and you are happy to confirm the missing figures with the seller before you buy. Skip it if you need a stated hot or cold rate, a stated dimension, or a convertible water line option before you choose.

Buying guide

A bottom load cooler is easy to live with when the bottle, the output, and the room fit together. The guide below covers the points that matter most, in the order a buyer should check them: bottle fit first, then hot and cold output, then placement, then cleaning, then the choice between bottled use and a plumbed supply.

How to match an Oasis bottom load water cooler to daily use in the best oasis bottom load water coolers

Start with the people who will use the cooler and the times of day when use is highest. A family kitchen has short peaks at meals, while a break room has a sharp peak at a coffee break, and a waiting area has steady light use through the day. Match the model to that pattern, not to a single feature.

Bottle size and fit

Bottle size is the first hard limit to check, because a cooler that does not fit the bottles you can buy locally will be a poor match. The maker manuals in this guide list 3 or 5 gallon bottles for the United States models, with 12 or 19 liter also given, while the listing page lists 10, 19, or 20 litre bottles.

Hot and cold output

Output rates are the clearest way to compare models, but they are given in different units in different manuals. Some manuals give gallons per hour, some give cups per hour, and some give litres per hour. Do not compare a cup figure with a gallon figure directly; compare the same kind of use instead.

Placement and ventilation

Placement starts with the floor, and a bottom load cooler needs a hard, flat, level floor away from direct sunlight and from other sources of heat. A unit placed in sun or near a heater will work harder to keep water cold, and a unit on an uneven floor can rock when the door is opened.

Cleaning and upkeep

Cleaning is part of owning a water cooler, and the manuals in this guide give clear intervals. The Aquarius and Maxxfill manuals list cleaning every 6 months, while the Mirage manual lists cleaning every 4 months. Use the interval in the manual for the model you own, not a general rule from another model.

FAQ

These questions cover the points buyers ask most often about Oasis bottom load coolers, with answers drawn from the published manuals and listings used in this guide. If a manual does not state a fact, the answer says so, so you can ask the seller for that figure before you choose.

What bottle sizes fit these Oasis coolers?

The United States maker manuals in this guide list 3 or 5 gallon bottles, with 12 or 19 liter also given, for the Aquarius, Mirage, and Maxxfill models. The listing page lists 10, 19, or 20 litre bottles for the bottled range. Check the model you choose against the bottle sizes sold near you.

Do these models give hot, cold, and room temperature water?

Most models in this guide give hot and cold water, and several give room temperature water as a third option. The Aquarius model lists hot, cold, and room temperature buttons, and the Mirage models list hot, cold, and room temperature as a tri-temp range. The Maxxfill and Danu models list hot and cold only on the opened pages used here.

How often should a cooler be cleaned?

The manuals in this guide give different intervals for different models, so use the interval for the model you own. The Aquarius manual lists cleaning every 6 months, and the Maxxfill manual lists cleaning every 6 months as well. The Mirage manual lists cleaning every 4 months.

Can a convertible model run without a bottle?

Yes, a convertible model can run without a bottle when it is connected to a direct water line, but only if the manual lists that option. The Mirage spec sheet lists conversion to point of use use with included parts, and the Maxxfill manual describes preparing the system for use as a bottleless water dispenser.

What should I measure before I choose a model?

Measure the floor space, the height under any shelf or cabinet, the door swing in front of the unit, and the distance to a grounded outlet. The Mirage models list dimensions of W 12 in x D 12 1/2 in x H 40 3/8 in, so they need a clear floor area of at least that size plus ventilation space. The Danu model is taller and wider than the Mirage models.

Conclusion

The Aquarius BAEB1SHSK is the best overall pick for most homes and small offices, with tri-temp output and a clear manual. Choose the Mirage for compact hot drink use, the Maxxfill Flex for strong cold output and a future water line, and the Danu only where 220-240V power and contactless use fit the room.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.