Key takeaways
- Compare five gas cooktops with grill plates in the box, using burner output, plate build, cutout size and fuel conversion from maker, manual and listing pages.
A ribbed grill plate turns one burner zone of a gas cooktop into a searing station for steaks, chops and vegetables, then flips over to a flat side for eggs and pancakes. This roundup compares five gas cooktops with grill plates included in the box, using burner output, plate build, cutout size and fuel conversion from maker and listing pages.
Quick verdict
All five cooktops below include a reversible cast iron plate with a ridged grill side, stated by the maker or the listing page for that exact model. They split into four 36 inch models and one 30 inch model, with top burners from 13,000 to 20,000 BTU and both knob lineups built on sealed burners.
For the strongest single burner, the AMZCHEF UL-36AMHG05D-ST and the Amzgachfktch HG001-365S-GD both center on a 20,000 BTU burner. For a documented manual behind the plate, the GASLAND PRO GH3365SF spells out grill side use in its instructions. For a smaller cutout, the GASLAND GH3305EFN brings the same plate idea down to 30 inches in black enamel.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| GASLAND PRO GH3365SF | 36 inch, 5 burners | Manual-backed grill plate use | 13,000 BTU dual ring wok burner, reversible cast iron plate | Plate needs seasoning before first use |
| AMZCHEF UL-36AMHG05D-ST | 36 inch, 5 burners | Highest wok burner output | 20,000 BTU wok burner, 48,300 BTU total | Body measures 35.43 inches wide, under a full 36 |
| Amzgachfktch HG001-365S-GD | 36 inch, 5 burners | Tri-ring center burner | 20,000 BTU tri-ring center, 48,300 BTU total | Plate is thinner than plates on higher-end models |
| KOXKING 36 Inch Gas Cooktop with Griddle (5B-36 inch with Griddle) | 36 inch, 5 burners | Simple drop-in layout | Total output listed at 10.55 kW, flame-out protection | Listing page states no per-burner ratings |
| GASLAND GH3305EFN | 30 inch, 5 burners | Smaller cutouts | 13,000 BTU top burner, cutout 28.6 by 18.9 inches | Plate needs seasoning before first use |
How we selected
The rule for this roundup is narrow: a cooktop counts only when the maker or the listing page states, for that exact model, an included reversible plate with a ribbed grill side, or a built-in grill. Flat griddles with no grill side, and plates sold as optional extras, were left out even when the burners were strong.
Every model here is a built-in gas cooktop that is currently listed for sale, and every figure in the sections below comes from a maker page, a maker manual, a listing page or a review page that describes the model. Where a page does not state a figure, the text says so instead of filling the gap. Burner ratings are quoted as the pages print them, in BTU per burner or as a listed total.
The five picks share a pattern worth knowing before the details: four of them come from newer direct-sale brands rather than the long-running appliance names, and all five pair the plate with sealed burners, a thermocouple flame-out device and a natural gas to propane conversion path. The differences that matter are burner output, cutout size, plate documentation and finish.
Gas cooktops with grill: the five models, spec by spec
Each model below earned its place with the same evidence: a page that names the model and states the reversible grill plate in the box. The sections follow a fixed order, from the widest burner spread to the compact pick, and each one closes with the limits a buyer should weigh before ordering.
GASLAND PRO GH3365SF: the manual spells out the grill side
This 36 inch GASLAND PRO model is the one whose maker manual describes the plate in plain terms: a reversible cast iron grill and griddle, with the ribbed side for grilling meats to reach sear marks and the flat side for pancakes or eggs. Five sealed burners sit under continuous grates on a stainless steel surface.
The maker lists a 13,000 BTU dual ring wok burner, a 10,300 BTU burner and two 7,000 BTU burners, and a review page describes the full spread as running from a 4,000 BTU simmer burner up to the 13,000 BTU top figure. The cooktop body measures 36.0 by 20.7 by 4.5 inches and drops into a cutout of 34.7 by 19.3 inches. Ignition is a 120 volt pulse system, so the cutout needs an outlet close by.
The maker lists a thermocouple flame-out device that shuts the gas if no flame is detected, CSA certification for the US and Canada, and a natural gas setup with propane nozzles included for conversion. The plate is heavy cast iron, which holds heat well across a long sear, and the sealed burners keep drips and crumbs out of the gas ports, so the surface wipes down without lifting burner parts beyond the caps and grates.
- Pros: maker manual names the ribbed grill side and its use; dual ring wok burner; conversion nozzles in the box
- Cons: cast iron plate needs seasoning before first use; the manual text leaves one burner rating unstated
- Buy if: you want the grill plate documented by the maker, with a wok burner beside it
- Skip if: you want a plate that needs no seasoning or upkeep routine
AMZCHEF UL-36AMHG05D-ST: a 20,000 BTU wok burner
The AMZCHEF 36 inch model pairs the strongest wok burner in this group with a two-in-one reversible grill and griddle in cast iron. The listing page describes grill ridges for sear marks and a wide handle on the plate, and its included components list names the double sided griddle alongside the cooktop unit itself.
Five Italy Sabaf sealed burners carry the cooking: a 20,000 BTU wok burner, a 10,300 BTU burner, two 7,000 BTU burners and a 4,000 BTU simmer burner, for a listed maximum of 48,300 BTU per hour across the top. The body measures 35.43 by 20.08 by 2.56 inches, which is under a full 36 inches wide, and the cutout is 32.87 by 19.09 inches, smaller than most 36 inch openings and worth measuring twice.
The surface is 304 stainless steel with knob controls. The maker lists a thermocouple flame-out device, ETL certification, and a dual fuel design that starts on natural gas with propane nozzles in the box. The listing page gives a one year warranty. The trade-off is footprint discipline: that smaller cutout helps a retrofit, but the five burners sit closer together than on a full-width frame, so very large pans crowd sooner.
- Pros: 20,000 BTU wok burner; plate and components spelled out on the listing page; smaller cutout suits retrofits
- Cons: body is 35.43 inches wide rather than a full 36; burner spacing is tighter than full-width rivals
- Buy if: wok heat and a documented grill plate matter more than a full-width frame
- Skip if: your cutout is a true 36 inch opening and you want the cooktop to fill it edge to edge
Amzgachfktch HG001-365S-GD: tri-ring center and a knob lock
The Amzgachfktch 36 inch model, code HG001-365S-GD, builds its pitch around a 20,000 BTU tri-ring center burner and an included reversible cast iron griddle. A review page describes the two faces plainly: a smooth side for breakfast foods and a ridged side for grilling meats and vegetables.
The maker lists five SABAF sealed burners totaling 48,300 BTU, with the remaining burners spanning 4,000 to 10,300 BTU around the tri-ring center. The maker rates its SABAF burners at 95 percent thermal efficiency, a figure quoted here as the maker states it. The body is 35.4 inches wide over a 304 stainless steel surface, and the cutout matches the AMZCHEF at 32.87 by 19.09 inches.
The maker lists CSA certification, a thermocouple flame-out device, and a preset natural gas setup with LPG conversion nozzles and a propane pressure regulator in the package. The knobs carry a child lock, and the maker covers the line with a one year warranty. The honest limit comes from the review page: the plate is thinner than the plates fitted to higher-end models, so heat spread across a long, full-plate cook runs a little less even.
- Pros: 20,000 BTU tri-ring center burner; regulator included for propane conversion; knob lock fitted
- Cons: plate is thinner than higher-end plates; brand support runs through the listing storefront
- Buy if: you want tri-ring heat and a full conversion kit in the box
- Skip if: long, full-plate cooks are your main use and plate thickness matters most
KOXKING 36 inch gas cooktop with griddle: the plain drop-in
The KOXKING entry, model 5B-36 inch with Griddle, states its plate right in the listing title: a reversible cast iron grill and griddle. It is the plainest package here, a drop-in stainless steel cooktop with five burners, flame-out protection and a fingerprint resistant finish, aimed at a straightforward counter swap.
The listing page rates total output at 10.55 kW across the five burners and lists a weight of 45.4 lb, a 110 volt supply, and fuel listed as LPG and NG. In the box, the listing names a gas regulator, a cut-out template board, the user manual, an installation set and the NG and LPG conversion nozzle. A template in the box is a small thing that helps: the cutout can be marked from paper rather than measured from the frame.
The limits are about documentation rather than hardware. The listing page does not break the total output down into per-burner ratings, and it does not print a cutout figure, so a buyer has to confirm both with the maker before cutting a counter. The plate claim rests on the listing title and the model name itself, which carries the words with Griddle, rather than on a manual section like the GASLAND PRO above.
- Pros: reversible cast iron grill and griddle named in the listing; template and regulator included; lighter at 45.4 lb
- Cons: no per-burner ratings on the listing page; no cutout figure printed there either
- Buy if: you want a simple five burner drop-in and will confirm the cutout with the maker first
- Skip if: you need full burner-by-burner figures published before you order
GASLAND GH3305EFN: the 30 inch version in black enamel
The GASLAND GH3305EFN steps the same formula down to 30 inches: five Italy Sabaf sealed burners under a black enamel surface, with a reversible cast iron plate that a review page describes as giving a smooth flat surface on one side and a ridged grill side on the other.
The review page lists a 13,000 BTU high-output burner with simmer burners at 4,000 and 7,000 BTU, a cutout of 28.6 by 18.9 inches, and both natural gas and propane nozzles in the box. Ignition is an automatic electronic pulse type that plugs into a 120 volt outlet. The enamel finish is the practical difference from the stainless models above: the review page notes it resists stains and discoloration and wipes clean with a damp cloth.
The maker pairs the burners with a thermocouple shutoff, and the review page records CSA certification for the model. Sealed burners keep drips out of the gas chamber. The trade-offs match the 36 inch GASLAND: the cast iron plate needs a seasoning session before its first use, and the 120 volt ignition means an outlet has to sit within reach of the cutout, which older 30 inch openings do not always provide.
- Pros: full grill plate package in a 30 inch cutout; enamel surface wipes clean; conversion nozzles included
- Cons: plate needs seasoning; ignition needs a nearby 120 volt outlet
- Buy if: your opening is 30 inches and you still want a ribbed grill side in the box
- Skip if: your cutout has no outlet nearby and rewiring is off the table
Buying guide
A grill plate changes how a gas cooktop earns its keep, but only if the plate, the burners under it and the cutout all line up. The checks below follow the order that rules models out fastest: plate evidence first, then burner layout, then the hole in the counter, then fuel and upkeep.
What to check before buying gas cooktops with grill plates
Start with the plate itself. The listing or maker page should state, for the exact model, that a reversible plate is included and that one side is ribbed for grilling. A flat griddle alone does a fine job on pancakes, but it will not give sear marks, and a plate described as optional or sold separately is a different purchase than one in the box.
Then check what the plate is made of. Every model in this roundup uses cast iron, which holds heat through a thick steak but arrives unseasoned or lightly seasoned and asks for oil and heat cycles before food releases cleanly. Cast iron also adds real weight over the burners it covers, so think about lifting the plate on and off with hot hands and where it will live when burners matter more.
Burner layout under the plate
A reversible plate usually spans one or two burners, so the burners underneath decide how evenly it heats. A plate laid over a single round burner tends to run hot in the middle and cool at the ends, while a plate over a long or paired burner zone spreads heat further. On these models, preheating time does the evening-out work.
Total output figures can mislead here. A 48,300 BTU total across five burners says little about the two burners under the plate, which is why the per-burner figures in each section above matter more than the headline sum. A 13,000 BTU burner under a cast iron plate gives a strong sear once the iron is hot; a 4,000 BTU simmer burner under the same plate barely warms it.
Cutout size and body width
Measure the opening before anything else. Two of the 36 inch class models here measure 35.43 and 35.4 inches across the body and ask for a 32.87 by 19.09 inch cutout, while the GASLAND PRO asks for 34.7 by 19.3 inches. Those are different holes, and a cooktop that drops into one will not necessarily cover the other.
Depth matters as well as width. The AMZCHEF body stands 2.56 inches tall where the GASLAND PRO stands 4.5 inches, which changes what fits in the cabinet below, from drawer clearance to the gas connection run. If a listing page does not print a cutout figure, as with the KOXKING above, get the figure from the maker in writing before the counter is cut.
Fuel conversion and ignition
All five models ship set for natural gas and convert to propane with parts in the box, but the parts differ: most include nozzles only, while the Amzgachfktch includes a propane pressure regulator. If your home runs on propane, that regulator is one less part to source, and the conversion still has to follow the maker instructions and local code.
Ignition is the second hookup. These cooktops light with electric pulse or electronic ignition, which means a 110 or 120 volt outlet near the cutout. A replacement project that drops a gas cooktop into an opening served only by a gas line may need an outlet added, and that small electrical job is worth planning before the cooktop arrives rather than after.
Cleaning and care for cast iron plates
Cast iron plates ask for a short routine: season before first use, preheat well, and clean while warm with a scraper rather than a soak. The ridged side collects more residue in its grooves than the flat side, so it rewards a brush while still warm. The makers state the seasoning step plainly, so treat it as part of the purchase.
The cooktop around the plate is easier. Sealed burners on all five models keep spills out of the burner box, stainless surfaces wipe down with a damp cloth, and the black enamel on the 30 inch GASLAND is described as resisting stains and discoloration. Grates and the plate lift off for sink washing, though the plate is heavy enough that most owners will clean it in place.
FAQ
Most questions about this category come back to the plate: what the ridged side really does, whether it can live on the cooktop, and how it changes daily cooking. The answers below stick to what the maker and listing pages for these five models state, plus general care practice for cast iron.
Do gas cooktops with grill plates replace an outdoor barbecue?
Partly. The ridged side of a cast iron plate gives sear marks and a hard sear on steaks, chops, burgers and vegetables, and it does so indoors in any weather. What it does not give is smoke: a plate over a gas burner has no charcoal or wood, and the fat that drips onto hot iron behaves differently than fat over open flame.
Think of the plate as a weekday searing station rather than a full barbecue stand-in. It covers the meals where marks and crust matter most, and it does it without a trip outside. For low and slow cooking, heavy smoke or very large batches, an outdoor grill still has the room and the fire that a cooktop plate cannot match.
Can the plate stay on the cooktop all the time?
It can sit over its burners between uses, and many owners leave it there, but the burners under it are then committed to plate duty. On a five burner top that still leaves three burners free for pots, which is workable; on a night when every burner needs a pan, the plate has to come off and go somewhere heat-proof while it cools.
Weight is the practical catch. These plates are solid cast iron, heavy enough that moving one hot is a two-hand job with proper mitts. If your cooking uses all burners most nights, plan storage for the plate near the cooktop; if the plate will host breakfast or a sear most days, leaving it in place is the simpler routine.
Does the grill side need seasoning like the flat side?
Yes. The plate is one piece of cast iron, so both faces take the same seasoning: a thin coat of oil heated until it bonds to the iron, repeated a few times at the start and refreshed as the surface dulls. The GASLAND models state the seasoning step in their materials, and it applies to the ridges exactly as it does to the flat face.
Seasoning is also what keeps the ridged side from holding onto food. A seasoned ridge releases a steak cleanly and keeps its marks; a dry, unseasoned ridge grabs and tears the surface you were trying to crust. A brush and a light oil wipe after cooking, while the plate is still warm, keeps both faces in shape.
Will a reversible plate work over any burner layout?
The plates in this roundup are sized and shaped by each maker for its own cooktop, and they sit over the burners the maker intends. A plate from one brand is not promised to sit flat or heat evenly on another brand’s grates, and the makers here do not state cross-brand fit. Treat the plate and cooktop as a matched pair.
Within one cooktop, the plate still needs the right burner under it. A long plate over a small burner heats unevenly no matter how long it preheats, which is why these makers place the plate over their stronger central or paired burners. Follow the placement in the maker manual where one is given, as the GASLAND PRO manual does for its plate.
Can these cooktops run on propane?
Yes, all five convert from natural gas to propane, and all five include conversion parts in the box. Most include the nozzle set; the Amzgachfktch includes a propane pressure regulator. The GASLAND PRO manual describes conversion with the included propane nozzles and regulator, and the AMZCHEF manual prints LPG manifold pressure figures too.
Conversion is not just a nozzle swap to rush through. Orifices, regulator settings and manifold pressure all change with the fuel, and the makers print the figures for both gases in their manuals. Have the change done or checked by a qualified installer working to local code, and keep the natural gas parts if there is any chance of switching back.
Conclusion
For most kitchens, the AMZCHEF UL-36AMHG05D-ST pairs the strongest wok burner here with a clearly documented reversible grill plate. The GASLAND PRO GH3365SF answers with the best manual behind its plate, and the GH3305EFN carries the idea into 30 inch cutouts. Measure first, then pick by burner output.