Key takeaways
- Six built-in gas grills for outdoor kitchens compared on cutout dimensions, burner output, cooking area, materials and install needs, from 30 to 38 inches wide.
A built-in grill is a construction decision as much as a cooking one: the island is built around its cutout, the gas line is plumbed to its position, and the grill should outlast the countertop around it. This guide compares gas grills for outdoor kitchens on cutout, output, area and overall build quality.
Quick verdict
The Lynx L36TR is the control pick, pairing a 23,000 BTU infrared burner with two ceramic burners and a rotisserie. The DCS BH1-36R is the power pick at 92,500 BTU total with a dedicated smoker burner. The Bull Lonestar is the straightforward pick: four burners, 60,000 BTU, no complicated extras.
| Product | Width | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Coyote C-Series 36 C2C36 | 36 inch | Even four burner cooking, wind guard | 80,000 BTU, 875 square inches | No rear burner in this configuration |
| Bull Lonestar Select 30 | 30 inch | Smaller islands, simple layout | 60,000 BTU, 575 square inches plus rack | Insulated jacket is a separate item |
| Napoleon Built-In 700 Series 38 BIG38RB | 38 inch | Wide islands, five zones | 78,000 BTU, 945 square inches | Needs a GFCI outlet for lights and rotisserie |
| DCS Series 7 36 BH1-36R | 36 inch | High heat plus smoking | 92,500 BTU total, 871 square inches | Rotisserie needs a 120V supply |
| Lynx Professional 36 L36TR | 36 inch | Searing control, rotisserie cooking | 73,000 BTU plus 14,000 rear, 935 square inches | Premium build means a premium project budget |
| Summerset Alturi 36 ALT36 | 36 inch | Largest total surface here | 93,000 BTU main burners, 1,028 square inches | Spec sheet is light on feature detail |
How we selected
Every grill here had its maker spec sheet, manual or listing page opened and read, and every output, area and dimension in this article comes from those documents. A model was included only if the documents describe a current built-in gas grill head for island installation, in propane or natural gas form.
The outdoor kitchen filter was permanence: 304 stainless construction, a published cutout, and burner hardware built for years of outdoor service. Sizes run from 30 to 38 inches because islands do. Rotisserie burners, smoker features and lighting are treated as differences to choose between, not as a checklist every grill must pass.
One more thing shaped the ranking: documentation quality. A built-in grill is installed by a builder who works from the maker’s sheets, so models with complete published cutouts, clearances and electrical requirements ranked ahead of models with stronger marketing and thinner documents. When two grills cook alike, the one your builder can install without a phone call is the better buy.
Six gas grills for outdoor kitchens, compared in detail
Read this section with your island plan open. The cutout figures decide what fits an existing island, the burner layout decides how you will cook, and the electrical notes decide what your builder needs to run before the countertop goes on. Widths are nominal; cutouts are the numbers that matter.
Coyote C-Series 36 (C2C36)
The C2C36 runs four Coyote Infinity Burners at up to 80,000 BTU total under 875 square inches of cooking area, in complete 304 stainless steel construction. The maker spec sheet lists interior grill lighting and an integrated wind guard, two features that earn their keep in an exposed island.
The cutout is 32 1/2 inches wide by 20 1/2 inches deep by 10 1/4 inches high, with overall dimensions of 35 1/2 inches wide by 25 1/2 inches deep by 23 inches high. The sheet lists a 120 VAC grounded plug requirement, and accessories include an insulated jacket for combustible construction. There is no rear rotisserie burner in this configuration, so low and slow work happens on the main burners with the lid down.
The accessory list is worth reading before the island is drawn: the maker offers laser-cut signature grates, charcoal trays, a 14 inch stainless steel griddle and a gas conversion kit for this head. Planning for the griddle or the charcoal tray at design time is easier than discovering them later, and the conversion kit means a fuel change does not force a grill change. The wind guard, standard here, matters more than buyers expect: islands often sit in open yards where a freestanding grill would be turned out of the breeze.
- Pros: even four burner layout; wind guard built in; clear published cutout and electrical data
- Cons: no rear burner; rotisserie is not part of this model’s listed features
Buy it if you want a 36 inch head focused on straightforward multi-zone grilling. Skip it if rotisserie cooking is central to your plans, because this configuration puts its budget into the main burners instead.
Bull Lonestar Select 30
The Lonestar is the compact island option: four welded stainless steel bar burners at 15,000 BTU each, 60,000 BTU total, across 575 square inches of primary cooking surface plus a 176 square inch warming rack. The body is 304 stainless steel with a single-piece dual-lined hood and solid stainless grates.
Details from the listing: ReliaBull flame tamers, a full-size drip tray, a heavy-duty thermometer, push-and-turn piezo ignition and a twin lighting system over the grates. It comes in liquid propane (model 87048) or natural gas (87049), and the maker notes an insulated jacket, sold separately, is required for combustible-material island construction.
The same head also fits Bull’s matching 30 inch cart, which gives this model an exit route the others lack: if the island project shrinks or moves, the grill can live on the cart first and drop into the island later. The accessory list runs from a rotisserie kit and an infrared searing burner to a removable griddle plate and a smoker box, all published as separate items, so the base price of the head is not the whole project figure. The listing showed all four fuel and configuration variants available at read time.
- Pros: smallest footprint here for tight islands; simple burner layout; twin lights included
- Cons: jacket and finishing frame are separate purchases; no rear burner in the standard head
Buy it if your island is modest or the grill shares the counter with a side burner and doors. Skip it if you cook for large groups weekly, because 575 square inches of primary area fills up fast.
Napoleon Built-In 700 Series 38 (BIG38RB)
The BIG38RB is the wide option: five main tube burners at 12,000 BTU each plus an 18,000 BTU rear infrared burner, 78,000 BTU total, across 945 square inches of total cooking area, split 630 primary and 315 warming rack. The cooking grids are 9.5mm stainless steel in the maker’s wave pattern.
The technical sheet lists JETFIRE ignition, an ACCU-PROBE temperature gauge, lighted control knobs that turn red when a burner is lit, and a rotisserie motor rated for 25 pounds. Cutout for the appliance cavity is 36 to 38 inches wide, 10 1/4 inches high and about 19 1/2 inches deep, and an optional zero clearance liner allows combustible construction with its own larger cutout. Knob lighting and the rotisserie need a GFCI 110-120 VAC supply.
Two install details in the sheet deserve attention. First, the cavity depth for the grill itself is notably shallow, about 19 1/2 inches, because the design is a true built-in with integrated trim; the liner version needs more room, at 22 1/4 inches deep and 42 inches wide. Second, the knobs across the 700 Series components interconnect, so a side burner added later lights in the same system. The drip pan slides out from the front, which is the right direction in an island, where rear access usually does not exist.
- Pros: five zones plus rear burner; zero clearance liner option widens design choices; convertible valves for fuel changes
- Cons: widest cutout here; electrical supply needed for the lighting and rotisserie features
Buy it if the island is being designed around the grill and you want the most zones in this group. Skip it if you are dropping a head into an existing 36 inch cutout, because this one wants more width.
DCS Series 7 36 (BH1-36R)
The BH1-36R is the output leader among the 36 inch heads: three U-burners at 25,000 BTU each, a 14,000 BTU rotisserie burner and a dedicated 3,500 BTU smoker burner, for 92,500 BTU total per the maker guide. Cooking area is 630 square inches primary and 871 total, with a 241 square inch warming rack.
The maker describes a heat range from 300 to 1,100 degrees, double-sided cast stainless steel grates, a grease management system that channels grease away from the flames, and a Smart Beam halogen grill light. Dimensions are 35 7/8 inches wide by 26 5/8 inches deep by 24 1/4 inches high; the proud cutout is 34 1/2 inches wide by 10 1/8 inches high by 22 3/4 inches deep. The rotisserie, rated for 50 pounds, runs on a 120V supply.
The double-sided grate is a small idea with daily value: one face has a gentle radius for fish and vegetables, the other is W-shaped for sear lines and grease channeling, so the same grate serves a salmon night and a steak night by flipping it over. The smoker tray is sealed and dedicated, with its own 3,500 BTU burner, which means smoke does not depend on a main burner running hotter than the food wants. Ignition is a 9V battery spark system, the one electrical item here that does not need the island wired.
- Pros: highest total output here; dedicated smoker burner; double-sided grates for delicate and heavy foods
- Cons: deep cutout at 22 3/4 inches; smoker and rotisserie add parts to maintain
Buy it if you sear hard, smoke often and want both in one head. Skip it if your island depth is tight or your cooking is simple enough that the extra systems would sit unused.
Lynx Professional 36 (L36TR)
The L36TR mixes burner types: one Trident infrared burner, rated at 23,000 BTU with a maker-stated range of 300 to 1,000 degrees, plus two cast ceramic burners, for up to 73,000 BTU on the main surface. A rear infrared burner at 14,000 BTU drives a dual-position rotisserie with a three-speed motor.
Total cooking surface is 935 square inches, 640 primary and 295 secondary. The listing details ceramic radiant briquettes, hot surface ignition, dual halogen surface lights, blue-lit control knobs, a temperature gauge, a smoker box included in the box, and a hood assist system for the heavy lid. Cutout is 35 inches wide by 10.13 inches high by 22 inches deep; the grill itself is 36 inches wide by 24.75 inches high by 25.38 inches deep.
The ceramic burners are the long term argument: the maker builds them from cordierite ceramic, a kiln material chosen because metal burners expand, contract and clog over years of heat cycles. The briquettes above them can be cleaned by reversing the tray and raising the heat, per the maker’s own description. None of that removes maintenance, but it changes its shape: this grill asks for briquette care and grate cleaning rather than burner replacement planning.
- Pros: infrared searing zone beside even ceramic heat; rotisserie and smoker box included; hood assist
- Cons: mixed burner types mean mixed maintenance; the heaviest spec of electrical and care needs here
Buy it if you cook steaks and rotisserie in the same week and want each on dedicated hardware. Skip it if you prefer one burner type and the simplest possible upkeep.
Summerset Alturi 36 (ALT36)
The Alturi 36 posts the biggest numbers in this group: the maker spec sheet lists three main burners at 93,000 BTU total and a total cooking surface of 1,028 square inches, in number 304 stainless steel. It is the widest working surface here on a standard 36 inch class body.
The sheet gives a cutout of 34.5 inches wide by 10.1875 inches high by 23.0625 inches deep, actual dimensions of 36.024 inches wide by 25.484 inches high by 26.649 inches deep, and a 120 VAC electrical supply for its powered features. The manual adds the hardware the sheet omits: red brass main burners, an infrared back burner with a rotisserie kit in the box, heat zone separators and briquette trays. It also requires a grill liner in a combustible surround and sets clearances of 4 inches to non-combustible walls and 18 inches to combustible construction.
Read together, the two documents describe a more complete grill than the verdict table suggests: interior lights, a temperature gauge, piezo ignition valves and a conversion kit with orifices for the other gas type are all in the manual. The honest gap is presentation, not hardware: output per burner and the split between primary and warming area are not published in the sheet, so the 1,028 square inch total cannot be broken down from maker documents alone.
- Pros: largest total cooking surface here; strong main burner total; clear cutout data
- Cons: published feature detail is thinner than rivals; deep cutout at just over 23 inches
Buy it if total area is your first priority and your island can take the depth. Skip it if you want the longest published feature list to compare before committing, because this maker’s documents focus on dimensions and output.
Buying guide
Built-in buying runs in a different order from portable buying: island first, grill second, features third. The five checks below follow the build sequence, because a mistake in the early steps is set in concrete by the later ones, and fixing it means cutting into a finished counter.
Cutout before everything
Every figure in this guide comes from maker documents, and cutouts still vary by more than an inch between brands at the same nominal width. If the island exists, measure its cutout and match the grill to it. If the island is planned, choose the grill first and hand the builder the maker’s cutout sheet, not a headline number.
Island materials and liners for gas grills for outdoor kitchens
Combustible framing changes the install: Coyote, Bull and Summerset all publish insulated jacket or liner requirements for combustible surrounds, and Napoleon offers a zero clearance liner for the same job. These parts have their own, larger cutouts. Decide the island material before ordering, or the jacket becomes a delay and a second delivery.
Ventilation belongs in the same conversation. Islands need venting for gas appliances, and the Summerset manual’s clearance figures, 4 inches to non-combustible walls and 18 inches to combustible ones, show how much air space the makers assume around the firebox. A beautiful island that traps heat and gas vapor around the grill is a defect with good stonework, so vents and clearances go on the plan with the cutout.
Fuel: natural gas or propane
All six heads here are published in natural gas and propane versions or with conversion paths, and Napoleon’s sheet highlights convertible valves. A plumbed gas line ends cylinder handling for good, but it fixes the island position and needs a licensed install in most areas. Propane keeps the build simpler, at the cost of tank storage and refills.
Burner layout over headline BTU
Totals here run from 60,000 to 93,000 BTU, but layout matters more: four even tube burners in the Coyote, three heavy U-burners in the DCS, an infrared zone in the Lynx, five zones in the Napoleon. Think in zones per dish: a big cook needs a sear zone, a medium zone and a holding zone at once, and any of these layouts can do it.
Power, lighting and rotisserie planning
Several heads here need household power at the island: the Coyote sheet lists a 120 VAC grounded plug, the Napoleon needs a GFCI supply for knob lighting and rotisserie, the DCS rotisserie runs on 120V, and the Summerset sheet lists a 120 VAC input. Run the outlet during the build, not after the counter is set.
FAQ
Outdoor kitchen projects raise the same questions at the planning stage: sizing, liners, fuel lines and what happens when the grill eventually needs service or replacement. These answers use the maker figures published for the grills above, and the install rules their manuals set.
What size grill does an outdoor kitchen need?
For most households, a 36 inch head with 630 to 640 square inches of primary area, the DCS, Lynx and Napoleon class, covers family cooking with room for sides. Large parties push toward the 38 inch Napoleon or the Alturi’s 1,028 square inch total. A 30 inch head like the Bull suits a compact island where counter space matters more.
Can a built-in grill be replaced later?
Yes, but the cutout decides how easily. Grill heads lift out of the island, yet a replacement must match the existing cutout or the counter needs rework. This is the practical argument for choosing a grill with a published cutout from a maker that keeps dimensions stable, and for keeping the spec sheet with the house documents.
Service access matters too: front-removable drip pans, like the Napoleon’s, and burners that lift out without removing the head make the difference between a home service call and a countertop removal. Ask how the burners and valves are reached before the island is finished, because access panels are far easier to plan than to retrofit.
Do gas grills for outdoor kitchens need a vent hood?
Open air islands usually disperse heat and smoke without one, but covered patios and enclosed structures are different: Summerset’s manual, for example, calls for a hood larger than the cooking area with at least 1,200 CFM when an exhaust hood is used over the grill. Check local code for covered structures before the build, not after.
Is a rear rotisserie burner worth it?
It is worth it if you cook whole birds or roasts more than a few times a year. The DCS rear burner is 14,000 BTU with a 50 pound rated rotisserie, the Lynx rear burner is 14,000 BTU with a three-speed motor, and the Napoleon rear burner is 18,000 BTU. If that style is rare in your house, the Coyote and Bull put the money into main burners instead.
How long should a built-in grill last?
The honest answer is that the documents promise materials, not years: 304 stainless bodies, cast or welded burners, and, in Napoleon’s case, a limited lifetime warranty named in its technical sheet. Longevity in practice follows cover use, grease management and burner cleaning, season after season.
Conclusion
Start from the island: the Bull for compact builds, the Coyote for even four burner cooking, the DCS for heat and smoke, the Lynx for searing control, the Napoleon for five zones, the Alturi for sheer area. Match the cutout, plan the power and fuel line, and the grill will serve the outdoor kitchen well for years.