Key takeaways
- Baratza prints setting 18 for automatic drip brewers and Breville bands 31-45 as medium. Compare five burr grinders with a stated coffee grind for drip use.
Baratza prints setting 18 for an automatic drip brewer, Breville bands settings 31-45 as medium, and Capresso groups its settings under regular: the coffee grind for drip coffee makers starts from a number the maker prints, and each of the five grinders below publishes a range, a band or a starting point you can set on day one.
Quick verdict
Short on time? Start with the Baratza Encore if you want a printed drip setting to dial to, the Breville Smart Grinder Pro if you want the widest numbered range and a cup mode, and the Capresso Infinity if you want named bands instead of numbers. The Cuisinart doses by cups up to 18, and the OXO keeps the routine to a grind-time dial and one press.
Every grinder in this guide is a burr grinder whose maker or listing page prints the range it covers, and two of them print a drip-specific starting point or band. Baratza’s own manual starts an automatic drip brewer at setting 18 out of 40. Breville divides its 60 settings by brewing method and puts medium grinding at 31-45. Capresso marks four bands of four settings each, with regular between fine and coarse. Cuisinart spans 18 levels from ultra-fine to extra-coarse and doses by a 4 to 18 cup selector. OXO spans fine for espresso to coarse for French press and doses by grind time. None of the five asks you to guess where drip sits: the ranges and bands below are the makers’ own.
| Grinder | Burr set | Settings | Drip reference on the page | Dosing |
|---|---|---|---|---|
| Baratza Encore | 40 mm M3 conical steel burrs | 40 stepped settings | Manual starts automatic drip brewer at 18 | Manual on/off and pulse button, no timer |
| Breville Smart Grinder Pro | Hardened stainless steel conical burrs | 60 numbered settings | Medium band 31-45; grinds into a filter basket | Shots or cups, time in 0.2 second steps |
| Capresso Infinity | Commercial-grade solid conical steel burrs | 16 settings in four bands | Regular band between fine and coarse | Timer, 5 to 60 seconds |
| Cuisinart Supreme Grind DBM-8P1 | Burr mill, stainless steel and plastic body | 18 levels | Range runs ultra-fine to extra-coarse | Cup selector, 4 to 18 cups, automatic stop |
| OXO Brew Conical Burr Grinder | Stainless steel conical burrs | Range from fine to coarse | Settings span espresso fine to French press coarse | Grind-time dial, one-touch start |
How we selected these grinders
A grinder earned its place here only if its maker or listing page prints the grind range it covers, names the burr set, and shows how the dose is controlled. Pages with a settings count but no range, or a range with no burr information, were left out.
The five split into three control styles. Numbered dials (Baratza with 40 steps, Breville with 60) suit readers who want to return to an exact setting and nudge it one step at a time. Named bands (Capresso’s extra fine, fine, regular and coarse) suit readers who think in textures rather than numbers. Cup and time dosing (Cuisinart’s cup selector, OXO’s grind-time dial, Breville’s shots-or-cups mode) suit readers who grind the same pot size most mornings and want the amount handled for them. The buying guide below turns those styles into a checklist.
Grinders that hold a coffee grind for drip coffee makers
Five burr grinders follow, ordered by how directly the maker prints the drip reference: a numbered starting setting first, then a method band, then named bands, then wide ranges with cup dosing. Each entry leads with the printed drip reference before any other detail of the machine.
Baratza Encore
Baratza’s manual gives the clearest drip instruction in this guide: start an automatic drip brewer at setting 18 of 40, then adjust from there. The Encore wraps that number in a 40 mm conical burr set, a 300 g hopper and a pulse button, with no timer to program and no screen to read.
The Encore grinds with 40 mm M3 conical steel burrs across 40 stepped settings, and the manual excerpt printed on the listing page gives a starting point for six methods: espresso at 8 with limited precision, AeroPress at 12, Hario V60 at 15, automatic drip brewer at 18, Chemex at 20 and French press at 28. For a drip household, that ladder matters more than the raw count of settings, because it shows where the maker expects a drip pot to sit inside the range: just past the middle, well short of the coarse end. The listing page also recommends the regular Encore by name for drip coffee, pour-over, AeroPress and French press, and points espresso-focused buyers to the ESP sibling instead.
Capacities are printed plainly: the bean hopper holds 300 g and the grounds bin holds 120 g, and the grounds fall into that bin rather than a portafilter dosing cup. The burrs turn at 550 RPM with no load, the motor draws 70 W on 100-120 V power, and the body measures 13 x 15 x 34 cm. Operation is manual, an on/off switch plus a front-mounted pulse button, so the dose is however long you run it. Baratza designed and engineered the grinder in Seattle and manufactures it in Taiwan, and the listing notes that replacement parts and service documentation are available from the maker.
Breville Smart Grinder Pro
Breville divides its 60 settings by brewing method and prints medium grinding at settings 31-45, with a cups mode for filter coffee and a chute that grinds straight into a filter basket. A backlit LCD shows the grind setting, the selected shots or cups and the grinding time while the cycle runs.
The hardened stainless steel conical burrs cover the full span from fine espresso to coarse French press, and the listing breaks the dial into four method bands: settings 1-30 for espresso, 31-45 for medium grinding, 46-54 for medium-coarse and 55-60 for French press. A drip pot therefore lives in a fifteen-setting band, the widest working room any grinder here gives the drip range. Dosing splits by method too: espresso is set by shot count, while filter and press coffee are set by cup count, and Breville’s coffee chart on the page supports up to 5 espresso shots or 12 cups. Grind time adjusts in 0.2 second increments, so a dose can be trimmed in small steps once the setting is chosen.
Two details suit drip brewing directly. The grinder can deliver grounds into a portafilter, the included grounds container or a coffee filter basket, and the page’s own question section confirms that removing the cradle lets a filter basket sit under the outlet. The upper burr also adjusts independently of the dial, with a factory position of 6, extending the calibration range when a coffee needs to sit finer or coarser than the dial alone allows. The listing adds the working limits: the grinder is stepped rather than stepless, it doses by time rather than weight, it rests in standby after 5 minutes, and Breville caps a single run at 2 minutes with at least 2 minutes of cooling afterward.
Capresso Infinity
Capresso skips fine numbering and marks 16 settings as four bands of four: extra fine, fine, regular and coarse. A gear reduction motor turns the conical steel burrs slowly, and a timer running from 5 to 60 seconds handles the dose for each pot ground at home.
The setting names do the work that numbers do on the Baratza and Breville. Sixteen clearly marked fineness settings are grouped into four levels of four, running from extra fine through fine and regular to coarse, and the whole range reaches from ultra-fine Turkish at one end to coarse at the other. The listing page’s own grind guide describes a flat filter grind as a medium grind with a consistency like sea salt, suited to flat-bottom drip brewers, and a cone filter grind as medium-fine, similar to table salt, for cone-shaped coffee makers. On the Infinity’s bands, that puts a drip pot in the middle of the dial, with room to step finer for a cone filter.
The burr set is commercial-grade solid conical steel, and the gear reduction motor is listed as grinding slow with reduced noise and little static build-up; the maker describes that slow speed as creating less friction and heat build-up across all grind settings. The bean container holds 8.8 oz and the ground coffee container holds 4 oz, the body measures 5 x 7.75 x 10.5 inches in an ABS plastic housing, and a pulse mode sits alongside the timer. A lock system stops the grinder when the bean container is not locked into place. Capresso backs the Infinity with a limited 1-year warranty, per the listing.
Cuisinart Supreme Grind Automatic Burr Mill
Cuisinart’s burr mill covers 18 levels from ultra-fine to extra-coarse and doses by volume instead of time: a selector grinds enough for 4 to 18 cups, an automatic stop ends the cycle, and the removable grind chamber holds enough ground coffee for 32 cups at once.
The 18-position selector is the whole control story: one dial runs from ultra fine, which the maker aims at espresso makers, to extra coarse for French presses, and a drip pot is ground in the middle stretch of that span. Where the Baratza and Breville ask you to pick a number and a time, the Cuisinart asks how many cups the pot needs. The maker states that the mill grinds enough coffee to make 4 to 18 cups in a run and that any remaining grounds can stay in the chamber, which holds enough for 32 cups. An automatic stop ends the cycle when the selected amount is ground, so a weekday pot does not need watching or a separate timer.
The body is brushed stainless steel with plastic, measuring 10.75 inches high, 6 inches wide and 7.13 inches deep, at 4.59 pounds with a 24 inch cord. The bean hopper removes for filling and holds 8 oz, the grind chamber removes for emptying, and a coffee scoop is included in the box. An interlock switch is listed among the model’s features. Cuisinart describes the mill as providing even grinding, a claim the article passes on as the maker’s own wording rather than a measurement, and the warranty runs 18 months, the longest term printed for any grinder in this guide. For a household that grinds one pot size most days and wants the amount handled by a cup selector, this is the simplest control scheme here.
OXO Brew Conical Burr Coffee Grinder
OXO keeps the controls to two moves: turn the dial to set the grind time, then press start. The stainless steel conical burrs cover a range from fine for espresso to coarse for French press, and the dose on this grinder is set by time rather than by cups or by weight.
The maker’s description is short and direct: add beans to the grinder, choose from the grind settings, and press start. The range is stated by its two ends, fine for espresso at one extreme and coarse for French press at the other, so a drip pot is ground between those printed endpoints. Unlike the Breville, there is no printed method band for the middle of the range, and unlike the Baratza, no numbered drip starting point; the opened page prints no settings count for this model either. What the page does promise is a short routine: the grind-time dial decides how much coffee is ground, and one press starts the cycle.
That minimalism is the reason to pick this grinder over the others here. A household that grinds for one drip pot and little else does not need sixty numbered settings, a method chart or a cup selector; it needs a burr set that covers the drip range and a dose control that can be repeated half awake. The OXO’s stainless steel conical burrs cover that range within the stated span, and the timed dial gives a repeatable amount once it has been set for the household’s usual pot. Readers who want a printed drip setting to return to should look at the Encore or the Smart Grinder Pro first; readers who want the fewest decisions between beans and brewing will find this the plainest grinder in the guide.
Buying guide
Five checks decide between these grinders: whether the maker prints a drip starting point, how wide the drip band is, how the dose is measured, how much the hopper and bin hold, and how the burrs are driven. Each check below uses only figures and ranges the makers themselves print.
Look for a printed drip starting point
A printed starting point turns the first pot from a guess into a setting. Baratza’s manual starts an automatic drip brewer at 18, Breville bands medium grinding at 31-45, and Capresso names a regular band between fine and coarse. A grinder that prints any of the three gives you a maker’s answer to copy on day one.
The value is not the number itself but what it anchors. Coffee changes from bag to bag, and a roast that runs fast at the printed setting can be nudged one step coarser, while a slow pot can be nudged one step finer, with the maker’s starting point as the reference both times. Without a printed reference, the first adjustment has nothing to be measured against. When you compare grinders, treat a printed drip setting, band or texture description as a feature in its own right, on the same level as the burr set or the hopper size.
Start from the maker’s printed coffee grind for drip coffee makers number
Once the pot is brewing, change one step at a time and write the setting down. A numbered dial like the Encore’s 40 steps or the Smart Grinder Pro’s 60 makes that record exact; a named band like the Infinity’s regular asks you to note the band and the position inside it instead of a single number.
Keep the dose steady while you adjust the grind, because changing both at once hides which one fixed the pot. On a timed grinder, that means leaving the grind time or the cup count alone for the first few pots and moving only the setting. On the Breville, the 0.2 second time steps let you trim the dose later in small increments without disturbing the grind you settled on. The goal is a written pair, setting plus dose, that the household can return to for each coffee it buys often.
Pick a dosing style you will repeat
Dosing comes in three styles here: manual running on the Encore’s on/off and pulse controls, timed running on the OXO’s grind-time dial and the Capresso’s 5 to 60 second timer, and counted running on the Cuisinart’s 4 to 18 cup selector and the Breville’s shots-or-cups mode. The right style is the one your household sets the same way every morning.
Manual dosing suits small, varied pots and drinkers who watch the bin fill. Timed dosing suits a fixed pot size, because the same seconds deliver roughly the same amount each run. Counted dosing suits households that think in pots rather than grams: set the cups, and the machine stops on its own, as the Cuisinart does with its automatic stop. If two people in the house grind differently, a counted or timed control also settles arguments, since the setting can be agreed once and left alone.
Match hopper and bin size to your pot
Capacity decides how often you refill and how much ground coffee sits waiting. The Encore holds 300 g of beans and 120 g of grounds; the Infinity holds 8.8 oz of beans and 4 oz of grounds; the Cuisinart holds 8 oz of beans and its chamber stores enough ground coffee for 32 cups, grinding 4 to 18 cups per run.
A large chamber suits households that grind ahead for a full day of pots, and a smaller bin suits grinding fresh for each pot. A 32 cup chamber earns its counter space only if the coffee in it is used the same day. Check the footprint at the same time, since the Infinity’s 5 x 7.75 x 10.5 inch body and the Cuisinart’s 10.75 inch height fit different shelves and cabinets.
Check the burr set and the drive
Every grinder here uses conical burrs, but the sets differ: 40 mm M3 steel burrs in the Encore, hardened stainless steel in the Smart Grinder Pro, commercial-grade solid steel in the Infinity. The drive differs too, from the Encore’s 550 RPM burr speed to the Infinity’s gear reduction motor, which the maker runs slow on purpose.
Ask what happens after the purchase as well. Baratza’s listing points to replacement parts and service documentation, and Breville’s upper burr can be recalibrated to extend the range at either end. Warranty terms printed for this guide run from the Infinity’s limited 1 year to the Cuisinart’s 18 months. A grinder is a motor and a burr set that wear together; parts support and a clear warranty are worth weighing alongside the settings count.
Frequently asked questions
Most questions about grinding for a drip pot come down to the same few points: what the makers print, how basket shape changes the answer, how many settings are enough, how to dose, and whether one grinder can cover espresso too. The answers below stay with the figures printed for the five grinders in this guide.
What coffee grind for drip coffee makers do the makers print?
Baratza prints a starting setting of 18 on the Encore for an automatic drip brewer. Breville prints a medium band, settings 31-45 of 60, on the Smart Grinder Pro. Capresso prints named bands on the Infinity, and its listing’s grind guide calls the flat filter grind a medium grind like sea salt for flat-bottom drip brewers.
Those three answers agree on the shape of the range even though the scales differ: drip sits in the middle of each grinder’s span, finer than French press and coarser than espresso. Where a maker prints no drip reference, as with the Cuisinart’s 18 levels and the OXO’s fine-to-coarse range, the middle of the printed span is the honest place to start, and the first pots tell you which way to step.
Is a medium grind right for every drip basket?
Basket shape shifts the answer by a step or two. The grind guide printed with the Capresso listing separates the two common shapes: a medium grind with a sea salt consistency for flat-bottom drip brewers, and a medium-fine grind similar to table salt for cone-shaped coffee makers and pour over drippers.
Baratza’s ladder shows the same split in numbers, starting a flat automatic drip brewer at 18 and a cone-shaped Hario V60 at 15 on the same dial. If your machine uses a cone filter, start a step or two finer than the flat-bottom starting point your grinder prints; if it uses a flat basket, start at the printed drip setting itself. Either way, the maker’s printed pair of references brackets the answer.
How many settings does a drip grinder need?
Fewer than the largest dial suggests. The Infinity covers drip inside 16 settings, the Cuisinart inside 18 levels, the Encore inside 40 steps and the Smart Grinder Pro inside 60. What matters is not the total but how many of those settings fall inside the drip band, because those are the steps you will actually use to adjust a pot.
By that measure, the Breville’s fifteen-setting medium band gives the finest control over a drip pot, while the Capresso’s four-step regular band gives the coarsest. Both work; they ask different things of the drinker. A wide band rewards small, patient adjustments; a narrow band reaches a drinkable range quickly.
Should the dose be set by time, cups or weight?
The five grinders here offer time and cups, and none of them doses by weight. Time is the most common: the OXO’s grind-time dial, the Capresso’s 5 to 60 second timer and the Breville’s programmable time in 0.2 second steps all deliver an amount by running the burrs for a set duration at a set grind.
Cups are the simpler language for a household: the Cuisinart’s selector grinds for 4 to 18 cups and stops on its own, and the Breville’s cups mode does the same job for filter coffee up to 12 cups on the maker’s chart. Weight would need a scale under the bin, which none of these five builds in. Pick the unit your household already thinks in, and keep it fixed while you adjust the grind.
Can one grinder cover drip and espresso?
On paper, yes: every range here reaches the fine end, from the Cuisinart’s ultra-fine to the OXO’s fine for espresso. The makers themselves add the cautions. Baratza lists its Encore espresso starting point at 8 with limited precision and points espresso drinkers to the ESP model built for that job instead.
Breville gives espresso the wider half of its dial, settings 1-30, plus portafilter cradles in two sizes, which shows where that grinder expects espresso households to land. The practical reading is that a drip-first household loses nothing by choosing any of the five, while a household that pulls espresso daily should weigh how much of each dial is given to the fine end before choosing.
Conclusion
Start where the maker tells you: setting 18 on the Encore, the 31-45 medium band on the Smart Grinder Pro, the regular band on the Infinity. The Cuisinart and the OXO trade a printed drip point for simpler dosing, by cups or by time. Any of the five beats guessing, because each one prints its range and lets you return to the setting that worked.