Updated Nov 16, 2026· 15 min read

Key takeaways

  • Compare six compact mixers for an acoustic guitar duo, with Hi-Z guitar inputs, vocal mic channels, built-in reverb and USB recording drawn from maker pages.

Two guitars, two voices and one board: the right mixers for acoustic guitar duo give each instrument a direct input, keep two vocal mics sounding clear and add reverb without a rack of extra gear. These six compact boards were picked from maker pages for that job, from plug-in-and-play analogue desks to a battery-powered option for outdoor sets.

Quick verdict

A duo needs less mixer than most boards offer, but the right four to eight inputs matter more than channel count. Two of these boards take guitars straight in on high impedance inputs, one adds per-channel processing and a built-in tuner, and one runs from a USB battery pack.

The Allen & Heath ZED-6FX and the Mackie ProFX6v3+ are the natural starting points, because both give each guitar its own proper input and both carry built-in effects for the vocal mics. The Bose T4S ToneMatch suits duos who play through Bose L1 systems and want processing on every channel. The Mackie MobileMix covers outdoor and busking sets with battery power, while the Yamaha MG06X and Behringer XENYX 802S keep things plain, light and analogue.

Model Channels Guitar inputs Mic inputs Effects Recording
Allen & Heath ZED-6FX 6 inputs 2 Hi-Z guitar DI inputs 2 mic/line FX engine, 61 presets, tap tempo None stated
Mackie ProFX6v3+ 6 channels Hi-Z switches 2 Onyx pres GigFX+, 12 presets 2×4 USB-C, 24-bit/192 kHz
Bose T4S ToneMatch 4 channels 4 combo jacks for mics or instruments 4 preamps Per-channel DSP, reverb, delay USB interface
Mackie MobileMix 8 channels 2 mic/instrument with Hi-Z 2 combo inputs 3 reverb types Device output for phones and cameras
Yamaha MG06X 6 channels Line inputs on combo jacks 2 D-PRE pres 6 SPX programs None (no USB)
Behringer XENYX 802S 8 inputs Mono line inputs 2 XENYX pres FX send for external processor USB stereo, 48 kHz/16-bit

How we selected these boards

Every board here was taken from its maker’s product page or a full listing, and only features printed on those pages are claimed in this guide. A duo board had to offer a workable path for two guitars and up to two vocal microphones, plus a way to add reverb, because dry vocals beside lively guitars rarely sit well together.

Boards earned their place in different ways: dedicated high impedance guitar inputs, per-channel processing, battery power for outdoor sets, or a plain analogue layout a duo can run without a manual. Boards with only one usable instrument input were kept only where the rest of the package still served a duo honestly, and that limit is stated in their sections rather than hidden.

Six mixers for acoustic guitar duo lineups compared

The six boards below cover the main duo shapes: two singing guitarists, one singer with two guitarists swapping instruments, and instrumental pairs who add a guest vocal now and then. Each section states how the guitars connect, what the voices get, and where the board runs out of room.

Allen & Heath ZED-6FX

The ZED-6FX is the board on this list built most directly for the job: Allen & Heath gives it two Guitar DI high impedance inputs, so both guitars plug straight in with no DI boxes to buy, carry or set up, beside two dedicated mic inputs for the voices.

It is a compact 6-input analogue mixer with two mic/line inputs on XLR and TRS sockets, two stereo inputs on TRS sockets, and the two Hi-Z instrument inputs. The internal FX engine holds 61 presets with tap tempo, built from studio quality reverbs and delays including multi-model combinations. Channels carry a responsive 2-band MusiQ EQ and a low cut filter, the main outputs are XLR, and 48V phantom power runs condenser mics. The preamp design comes from the team behind the maker’s flagship touring mixers, with low noise and generous headroom.

Who it is for: singing guitar duos who want both guitars plugged straight in and vocal reverb from the same small board.

  • Pros: two dedicated guitar DI inputs; 61 effect presets with tap tempo; XLR main outputs; phantom power for condenser vocal mics
  • Cons: only two mic inputs, so guest singers need the stereo inputs worked around; 2-band EQ only; no USB recording stated on the maker page
  • Buy if: both of you play and sing, and you want the fewest extra boxes between the guitars and the speakers
  • Skip if: you need to record every set to a computer, or you regularly add a third microphone

Mackie ProFX6v3+

The ProFX6v3+ pairs the duo basics with the strongest recording setup here: two Onyx mic pres with Hi-Z switches for the guitars, editable effects for the voices, and a USB-C interface that captures the whole set in three different modes, all at the same time.

Mackie lists two Onyx mic pres with up to 60 dB of gain, a GigFX+ effects engine with 12 presets that can be edited and saved via the full-color LCD, and a 24-bit / 192 kHz 2×4 USB-C audio interface. The three recording modes are Standard for the full mix with effects, Loopback for adding computer audio, and Interface, which records channels 1-2 without effects processing. Channels 1 and 2 carry 2-band EQ and one-button compression, all mic channels have a 100 Hz low-cut filter and 48V phantom power, a stereo 1/8 inch input sits on channel 5/6, and bi-directional Bluetooth brings in backing tracks or callers. The headphone output has its own level and blend control, and Waveform OEM software is included.

Who it is for: duos who record or stream their sets and want guitar inputs, vocal compression and effects editing on one small board.

  • Pros: Hi-Z switches for direct guitar connection; three USB recording modes; editable, saveable effects; Bluetooth for backing tracks
  • Cons: two mic pres only; EQ is 2-band and only on channels 1 and 2; compression limited to those two channels
  • Buy if: your duo records at home as often as it plays out, and you want one board for both jobs
  • Skip if: you need four microphone inputs, or you dislike menu screens on a gig board

Bose T4S ToneMatch

The T4S gives a duo something the analogue boards cannot: full processing on every channel. Its four combo inputs take microphones or instruments in any mix, so two guitars and two vocal mics fit with a channel philosophy built around presets rather than knobs.

Bose fits four preamps on XLR-combo jacks with switchable phantom power, and each channel gets independent ToneMatch processing, EQ through the zEQ system, dynamics and effects. The effect set runs to compressor, limiter, de-esser, noise gate, chorus, flanger, phaser, tremolo, delay and reverb, with a dedicated reverb on the Aux 1 send and a global shared reverb. There are two aux sends and two aux inputs, a master output EQ, tap tempo delay, a built-in chromatic tuner and recallable scenes. USB-A and USB-B ports cover drive playback and computer interfacing for streaming, and balanced 1/4 inch TRS outputs feed any speakers. The unit is bus-powered from Bose L1 systems through the included ToneMatch cable; standalone use with other speakers needs the optional Bose power supply, which is sold separately.

Who it is for: duos playing through Bose L1 systems who want a tuned preset for each guitar and voice, plus a tuner and scenes in the board.

  • Pros: four flexible combo inputs; per-channel EQ, dynamics and effects; built-in tuner; one-cable power and audio with L1 systems
  • Cons: power supply for non-Bose setups is an extra purchase; volume knobs instead of faders; four channels is the hard ceiling
  • Buy if: your PA is a Bose L1 and you want the mixer voiced to match it, channel by channel
  • Skip if: you run speakers from another maker and do not want the extra power supply, or you prefer plain analogue controls

Mackie MobileMix

The MobileMix answers the duo problem nobody else here touches: power. It runs from a USB battery pack stored in a compartment underneath, so a duo can play a garden, a market square or a festival corner or a beach shelter with no outlet in sight at all.

It is an 8-channel USB-powerable portable mixer with two mic/instrument channels on combo XLR and 1/4 inch connectors, each with a Hi-Z switch, a low-cut filter and switchable 48V phantom power. A stereo TRS line input takes keyboards and playback devices, two-way TRRS connectors hook up two smartphones or cameras at once, and a two-way Bluetooth channel with Mix Minus streams music from one device while recording to another, or captures a phone call without echo. Channels have their own EQ, three reverb types come with per-channel level, and two mix outputs with separate level controls feed a PA and monitors, beside a dedicated output for phones, tablets and DSLR cameras and a headphone output.

Who it is for: busking and outdoor duos, and pairs who film their sets on phones or cameras as they play.

  • Pros: battery power from a standard USB pack; two Hi-Z instrument channels; phone and camera outputs built in; two mix outputs for PA and monitors
  • Cons: the battery pack itself is bought separately; only two mic/instrument channels; no computer audio interface is claimed by the maker
  • Buy if: your gigs happen away from wall power, or your audience mostly watches on phones
  • Skip if: you need more than two microphones, or you record multitrack to a computer

Yamaha MG06X

The MG06X is the smallest, lightest board here at 0.9 kg, and the plainest: two D-PRE mic channels with fixed reverb and delay programs, two stereo line inputs for the guitars’ pickups or a playback device, and almost nothing else to learn on the day.

Yamaha fits two mono mic/line combo inputs with Class-A D-PRE preamps, gain trim from +20 dB to +64 dB, a 26 dB pad and an equivalent input noise of -128 dBu, plus two stereo line inputs on phone jacks. One switch sends +48 V phantom power to both mic jacks. Six fixed SPX programs, three reverbs (Hall, Room, Plate) and three delays (Short, Long, Vocal Echo), apply to the two mic channels. Each mono channel carries 2-band EQ and an 80 Hz high-pass filter, the stereo output is balanced on XLR and phone jacks, and a headphone jack is fitted. There is no USB, no aux send and no monitor output, and the metal body measures 149 x 62 x 202 mm.

Who it is for: duos who mic both guitars or run one mic and one pickup, want set-and-forget reverb, and carry everything in one trip.

  • Pros: very light metal body; quiet D-PRE preamps; simple fixed effects that suit voices; balanced XLR outputs
  • Cons: no USB for recording; effects reach the mic channels only, so guitars on line inputs stay dry; no monitor output
  • Buy if: your duo setup is two mics and a pair of powered speakers, and simplicity beats features
  • Skip if: both guitars need effected, dedicated instrument inputs, or you want to record the set

Behringer XENYX 802S

The 802S is the roomiest analogue option here, with eight inputs and a streaming-shaped USB link. Two XENYX mic preamps take the voices, the mono line inputs take guitar pickups, and an FX send lets you add an external reverb box only if you want one.

Behringer lists two mic preamps with 48V phantom power, a gain range of +10 dB to +60 dB and mic EIN of 132 dB A-weighted. Two mono and two stereo channels carry 3-band EQ (Low 80 Hz, Mid 2.5 kHz, High 12 kHz), and with another stereo channel, a stereo RCA streaming input and the stereo USB input, up to 12 signals can be blended. The FX send control on each channel feeds an external effects processor or a monitoring mix, since no effects are built in. The stereo USB interface runs at 48 kHz / 16-bit over a Type-B connector, channel 7/8 switches automatically between its TRS input and USB playback, and the RCA inputs can be assigned to the main mix or the monitor and phones outputs. Main, monitor and FX send outputs sit on 1/4 inch TRS connectors, and the unit draws 12 W.

Who it is for: duos who want spare inputs for a guest, a backing-track player and a streaming feed, and already own or plan an external effects unit.

  • Pros: eight inputs plus streaming paths; 3-band EQ on mono and stereo channels; USB playback switching on channel 7/8; monitor output included
  • Cons: no built-in reverb or delay; no Hi-Z input is stated, so guitars rely on pickups into line inputs or an external DI; USB audio is 16-bit
  • Buy if: your duo is growing into guests and streams, and you like analogue controls with a computer link
  • Skip if: built-in vocal reverb is a must, or both guitars need dedicated instrument inputs

Buying guide: mixers for acoustic guitar duo basics

A duo board lives or dies on four inputs: two guitars and two voices. The buying points below follow that shape, covering how the guitars connect, how the voices are treated, what monitoring is possible and how the set gets recorded, streamed or powered.

Count inputs by source, not by channel number

Write down every source before choosing: two guitars, two vocal mics, perhaps a backing-track player or a third instrument. Then match the list against mic inputs, instrument inputs and line inputs as separate pools, because a stereo line channel does not help a singer and a mic channel is wasted on a phone.

On this list, the T4S is the only board where all four main inputs accept mics or instruments freely. The ZED-6FX splits the job exactly, two guitar inputs and two mic inputs. The others ask the duo to assign roles: mics on the preamp channels, guitars on line or Hi-Z channels, playback on the stereo inputs.

Hi-Z inputs versus microphones on guitars

A passive guitar pickup wants a high impedance input; plug it into a plain line input and the tone thins out. Boards here state their guitar paths plainly: dedicated guitar DI inputs on the ZED-6FX, Hi-Z switches on the ProFX6v3+ and MobileMix, and combo jacks for microphones or instruments on the T4S.

The alternative is a microphone in front of each guitar, which uses up mic channels and picks up the room. The MG06X suits that approach, with two quiet preamps and reverb on the mic channels. The 802S states no Hi-Z input, so a duo choosing it should plan on active pickups, an external DI box, or microphones.

Reverb for voices, and a little for guitars

Reverb is the effect a duo actually uses every song, mostly on voices. Check where it can be applied: the ZED-6FX and ProFX6v3+ run one shared engine across the board, the T4S adds a dedicated reverb on its first aux send beside a shared one, and the MobileMix gives three reverb types a per-channel level.

Watch the limits too. On the MG06X the six SPX programs reach only the two mic channels, so guitars arriving on line inputs stay dry, which many duos prefer anyway. On the 802S there is no built-in effect at all; the per-channel FX send exists so an external processor can be added later.

Monitoring for two people

Two performers standing apart need to hear each other, and a single front mix rarely does it. The MobileMix provides two mix outputs with separate level controls for PA and monitors, and the 802S offers a monitor output plus RCA inputs assignable to the phones feed.

Simpler boards trade that away: the MG06X has no monitor output at all, and the T4S covers monitoring through its two aux sends. If your duo plays seated and close, a headphone output and a well-placed single speaker may be enough; if you play standing in noisy rooms, put a monitor path on the essentials list.

Recording and power on the road

Decide how the set gets captured before choosing. The ProFX6v3+ records the mix through USB-C, the T4S interfaces over USB and plays backing tracks from a USB drive, and the 802S streams a stereo USB feed at 48 kHz / 16-bit. The MobileMix sends a dedicated mix to phones and cameras, and the MG06X and ZED-6FX leave recording to other gear.

Power matters outdoors. Only the MobileMix runs from a USB battery pack, hidden in a compartment underneath. Everything else here expects a wall outlet or, in the T4S case, power down its cable from a Bose L1 system, so check the venue before promising an acoustic set in a field.

Questions about mixers for acoustic guitar duo setups

Short answers to the questions duos ask most, drawn from the maker pages behind this guide: how many inputs are really needed, whether DI boxes are required, and what to do when a third person joins for a song. Most answers come down to inputs and impedance.

How many channels does an acoustic duo actually need?

Four working inputs cover the classic setup: two guitars and two vocal microphones. Every board here meets that count in some arrangement, from the T4S with four flexible combo inputs to the ZED-6FX with two guitar inputs and two mic inputs. Extra channels earn their keep with backing tracks, a stomp box percussion feed or a guest.

That headroom is where the 802S and MobileMix pull ahead of the smaller boards.

Do we still need DI boxes with these mixers?

Not with the boards that state guitar-ready inputs. Allen & Heath says the ZED-6FX’s two Guitar DI inputs let guitars plug straight in without DI boxes, and the ProFX6v3+ and MobileMix fit Hi-Z switches for direct connection. With the MG06X or 802S, no Hi-Z input is stated.

On those two boards a passive pickup benefits from a DI box or an active pickup system, or the guitar can be played into a microphone instead.

Can one mixer handle two singers and two guitars at once?

Yes, and the four sources map cleanly onto the T4S, whose four combo inputs take microphones or instruments in any order, and onto the ZED-6FX, which splits them two and two by design. On the ProFX6v3+ and MobileMix the two mic/instrument channels take one role each pair.

The guitars or voices then use the remaining inputs as their pages describe, so plan who plugs in where before the gig.

What if a third musician joins for a few songs?

Spare inputs decide how graceful that moment is. The 802S blends up to 12 signals across its channels and streaming paths, and the MobileMix and ZED-6FX both carry stereo inputs that can take an extra instrument at line level. A third microphone is the harder ask.

Only the T4S has preamps to spare, so on the other boards a guest singer usually shares a mic or the duo gives up a guitar channel.

Can a duo record a gig with one of these boards?

Three of the six record as they sit. The ProFX6v3+ captures the mix, or channels 1-2 without effects, over USB-C at 24-bit / 192 kHz; the T4S works as a USB interface for streaming and recording; and the 802S sends a stereo USB feed at 48 kHz / 16-bit.

The MobileMix records through its phone and camera output rather than a computer, and the MG06X and ZED-6FX need a separate recorder or interface.

Conclusion

For most duos, the deciding factors are two honest guitar inputs, two clean vocal channels and reverb that lives inside the board. Pick the ZED-6FX or ProFX6v3+ for direct guitar inputs, the T4S for per-channel processing, the MobileMix for battery power, and the MG06X or 802S for the plainest analogue path.

Start from your four sources and your usual room, then let the limits in each section above rule boards out. A duo that hears itself clearly, sets up in minutes and carries everything in one trip will sound better on the right small board than on a large console used at a fraction of its size.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.