Key takeaways
- Compare window exhaust fans that push hot, stale air out and pull fresh air in. Check airflow, window fit, controls, and noise before you pick one for a room.
A room that holds the heat of the day stays stuffy long after sunset, and an open window alone moves too little air to change that. The best window exhaust fans push hot, stale air out through one opening while fresh air enters through another. This guide compares six fans with a real exhaust mode, using published airflow, window fit, and controls.
Quick verdict
If you want the short answer, start with the size of the job. A whole floor needs a large whole house fan with published airflow, while one bedroom does well with a twin fan that reverses from a control. The picks below cover both ends, plus a low profile option for windows that cannot take a tall unit.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Air King 9166F | Whole house window fan | Whole floor exhaust | 3,560 CFM on high | Needs a tall, wide opening |
| Air King 9155 | Whole house window fan | Large rooms, lighter lift | 2,470 CFM on high | No thermostat or remote |
| Comfort Zone CZ319WT | Twin window fan | Renters and small rooms | Two 9 inch fans, manual reverse | Two speeds only |
| Bionaire BW2300-N | Twin window fan | Bedrooms with a remote | Two 8.5 inch fans, 3 speeds | No published airflow figure |
| Vornado TRANSOM AE | Low profile window fan | Wide windows, quiet nights | 4 speeds, electronic reverse | No published airflow figure |
| Holmes HAWF2041-N | Twin window fan | Simple manual control | Two 8 inch fans, manual thermostat | No remote control |
The Air King 9166F leads on raw airflow, with 3,560 CFM on high, and it is the pick for clearing heat from a whole floor after sunset. Its smaller sibling, the Air King 9155, moves 2,470 CFM on high at 15.0 lb, so it suits a large room.
The twin fans suit one room at a time. The Comfort Zone CZ319WT is the simplest true reversal here, with a manual control, a handle, and feet for moving it from room to room. The Bionaire BW2300-N adds a remote and a programmable thermostat, the Holmes HAWF2041-N keeps things manual, and the Vornado TRANSOM AE is a low profile unit with four speeds.
How we selected
Every fan in this guide has an exhaust mode stated on a page this guide could open and read, either on the maker page or on a review page that quotes the maker. A fan that only blows inward, or one that reverses only by being lifted out and turned around, did not make the list.
The selection rests on published specifications and review pages, not on hands on use. For each model, the guide looked for the airflow figure where the maker publishes one, the window size, the way the airflow reverses, the number of speeds, the controls, and the noise figure where one is published. Where the maker publishes no airflow or wattage figure, the guide says so plainly instead of borrowing a number from a retail listing.
Window fit mattered as much as airflow, because a fan that cannot sit in your opening is useless no matter how much air it moves. Control mattered too, because an exhaust fan that is awkward to switch at night simply does not get switched. Thermostats, remotes, and one button reversal all scored in favor of a model.
Best window exhaust fans
The six fans below all reverse into an exhaust mode, but they differ in airflow, size, controls, and the windows they fit. Read the fit figures before anything else, then match the airflow and the controls to the room you want to clear of hot air through the house.
Air King 9166F 20 inch whole house window fan
The Air King 9166F is the strongest exhaust fan in this guide, built for clearing heat from a whole floor rather than one room. The maker lists 3,560 CFM on high, 3,120 CFM on medium, and 2,510 CFM on low, with power draw of 170, 145, and 115 watts at each speed.
The fan uses a 20 inch blade driven by a 3 speed, 1/6 HP motor that runs on 120 volt power, and the maker states that the fan can be set for intake or exhaust. A front mounted rotary switch changes the speed and sets the direction, so switching to exhaust takes a turn of the dial. The maker lists noise at 64, 57, and 50 dB on high, medium, and low.
The maker states a window of 27 to 38 inches wide and 26.25 inches high, and the unit itself measures 26.75 inches wide, 11.25 inches deep, and 26.25 inches high. At 36.6 lb it is the heaviest fan here, and the 9 foot black power cord gives room to reach an outlet. The Storm Guard mounting system lets the window close behind the fan, which seals the gap that an exhaust fan would otherwise pull air straight back in through. The maker lists ETL listing and compliance with OSHA requirements.
- Highest published airflow in this guide at 3,560 CFM on high
- Airflow and wattage published at all three speeds
- Storm Guard lets the window close behind the fan
- Needs an opening 27 to 38 inches wide and 26.25 inches high
- At 36.6 lb it is the heaviest fan in this guide
Buy it if you want to empty the heat from a whole floor after sunset.
Skip it if your window opening is shorter than 26.25 inches high.
Air King 9155 16 inch whole house window fan
The Air King 9155 is the lighter whole house option, with the same exhaust first design in a smaller frame. The maker lists 2,470 CFM on high, 1,700 CFM on medium, and 1,360 CFM on low, with power draw of 90, 65, and 52 watts, while drawing less power than its bigger sibling.
The fan uses a 16 inch blade driven by a 3 speed, 1/16 HP motor on 120 volt power, and the maker states that the fan can be set for intake or exhaust. A front mounted rotary switch controls the three speeds, and the maker does not publish a noise figure for this model, so a reader who cares about sound should weigh that gap. The maker lists ETL listing and compliance with OSHA requirements.
The maker states a window of 26.5 to 34.5 inches wide with at least 22 inches of height, and the unit measures 26.5 inches wide, 8.25 inches deep, and 22 inches high. At 15.0 lb it is less than half the weight of the 20 inch model. The Storm Guard system appears here too, so the window can close behind the fan. Like its sibling, this model has no thermostat and no remote, so speed and direction stay manual.
- Strong published airflow at 2,470 CFM on high
- Draws 90 watts on high, less than the 20 inch model
- At 15.0 lb it is easy for one person to lift and move
- No thermostat and no remote control
- The maker publishes no noise figure for this model
Buy it if you want whole house style airflow in a fan you can carry yourself.
Skip it if you want a thermostat or a remote.
Comfort Zone CZ319WT twin window fan
The Comfort Zone CZ319WT is the simplest true reversal in this guide, and the one that fits the narrowest windows. It has two 9 inch fans with a manual reversible airflow control, so the user switches between intake and exhaust with a control on the unit.
The fan has two speeds, low and high, set with a rotary control on the back. Auto locking accordion expanders fit windows from 22-1/4 inches to 31-1/4 inches wide, which covers narrow openings that the whole house fans in this guide rule out. A removable fabric cover keeps bugs, dust, and debris from entering through the fan.
Portability is the point of this model. It has an integral carrying handle and two sturdy feet for tabletop use, so it can move from room to room. The cord runs 5 feet long. The maker does not publish an airflow figure or a wattage figure on its product page, so this guide does not compare its output in CFM with the whole house fans above. The maker lists a 1 year warranty for this model.
- Reverses between intake and exhaust from a manual control
- Fits windows from 22-1/4 inches wide, the narrowest here
- Carrying handle and feet let it move from room to room
- Two speeds only, with no medium step
- The maker publishes no airflow or wattage figure
Buy it if you need a light fan that exhausts and fits a narrow window.
Skip it if you want published airflow figures or more than two speeds.
Bionaire BW2300-N twin window fan
The Bionaire BW2300-N pairs twin reversible fans with a remote control and a programmable thermostat. The two 8.5 inch fan heads can be set independently, so both can exhaust hot air, both can draw fresh air in, or one can do each job at the same time for an air exchange.
The fan has three speeds, low, medium, and high, set from the control panel or the included remote. The programmable thermostat turns the fans on and off to hold a chosen temperature, and the LED display shows the room temperature with a dimmer function for night use. The maker lists a 3 year limited warranty for this model.
The fan fits windows from 24 inches to 36 inches wide with a built in accordion extender panel and an additional extender panel, and it needs no assembly. The unit measures 4 inches deep, 24 inches wide, and 12.8 inches high, and it weighs 8.4 lb. The cable runs 6 feet long. The listing gives 80 watts of power draw and a noise level of 30 dB. The review page also notes a water resistant motor. The maker does not publish an airflow figure for this model.
- Two fans can be set independently for exhaust, intake, or exchange
- Remote control adjusts speed, mode, and temperature from across the room
- Programmable thermostat holds a chosen temperature
- The maker publishes no airflow figure for this model
- Needs a window at least 24 inches wide
Buy it if you want a twin fan with a remote and a thermostat.
Skip it if you need a published airflow figure or your window is narrower than 24 inches.
Vornado TRANSOM AE window circulator
The Vornado TRANSOM AE is a low profile window fan with an electronic one button switch between direct airflow and exhaust. The maker describes the change as a quick transition from fan to exhaust, which means the direction can flip at night without touching the unit in the window.
The fan has four speeds, low, medium, high, and turbo, set by touch controls or the included remote. An auto mode with a thermostat adjusts airflow as needed based on temperature, and the temperature can be set between 60 and 90 degrees F.
Fit is wide and short. The maker states that the unit fits single hung and double hung windows from 26 to 40 inches wide and needs a window opening of at least 8 inches tall. A Soft-Fit modular foam block system fills the gaps at the sides of the window, and the maker notes that the blocks form a barrier against outside noise and temperatures. The power cord runs 8 feet long. The enclosure is weather resistant, and the maker lists a 5 year warranty. The maker does not publish an airflow figure or a wattage figure for this model.
- One button electronic switch between direct airflow and exhaust
- Four speeds, from low to turbo
- Auto mode with a thermostat from 60 to 90 degrees F
- The maker publishes no airflow or wattage figure
- Needs a window at least 26 inches wide
Buy it if you want a low profile fan that flips to exhaust at the touch of a button.
Skip it if you need a published airflow figure.
Holmes HAWF2041-N twin window fan
The Holmes HAWF2041-N is the plainest fan in this guide, and that is its appeal. It has two 8 inch fan heads powered by independent electronically reversible motors, so each side can be set for air intake, exhaust, or air exchange on its own with ease.
The fan has three speed settings, and the motors are water resistant, which suits a window that may catch rain. The unit arrives with an extender panel and an adjustable extender screen to help it fit larger windows. The unit measures 6 inches deep, 25.7 inches wide, and 13.3 inches high, and it weighs 7.5 lb. Controls stay manual throughout, with no remote and no digital display.
The maker does not publish an airflow figure or a wattage figure for this model on the pages this guide could open, so the guide compares it on its reversible motors, its thermostat, and its fit rather than on CFM.
- Independent reversible motors allow intake, exhaust, or exchange
- Manual thermostat holds a chosen comfort level
- Water resistant motors suit a window that catches rain
- No remote control and no digital display
- The maker publishes no airflow or wattage figure
Buy it if you want a simple twin fan with a manual thermostat and reversible motors.
Skip it if you want a remote or published airflow figures.
Buying guide
Buying a window exhaust fan is mostly a measuring job with a controls decision on top. Get the opening right, pick the airflow direction control that you will actually reach for on hot nights, and the rest of the choice falls into place without much fuss.
Measure the window opening first
Measure the clear width and the clear height of the window with the sash fully open, and write both figures down before you look at any fan. Width decides whether the fan and its panels can close the gap, while height rules fans out outright, since a tall fan cannot fit a short opening.
The Comfort Zone twin fits from 22-1/4 inches wide, the Bionaire from 24 inches, the Vornado from 26 inches, and the Air King whole house fans from 26.5 and 27 inches. On height, the Vornado needs only 8 inches of opening, the Air King 9155 needs 22 inches, and the Air King 9166F needs 26.25 inches.
How to size a window exhaust fan
Sizing an exhaust fan starts with the volume of the room, not with the fan. A common way to size ventilation is to divide the room volume by the minutes you will accept for one complete air change, which gives the airflow needed in cubic feet per minute.
Room volume is floor area times ceiling height. A 400 square foot room with an 8 foot ceiling holds 3,200 cubic feet of air, so a one minute air change needs about 3,200 CFM and a three minute change needs about 1,070 CFM. A 120 square foot bedroom holds 960 cubic feet, and a 1,200 square foot floor holds 9,600 cubic feet. The inlet matters as much as the fan: a fan can only push out as much air as the house can let back in, so open a second window on the coolest side of the house.
Airflow direction and controls
The feature that defines this category is how the fan reverses. The best setup is a control that flips the direction without moving the fan, because a fan that needs lifting out to reverse will not get used that way at night, even on the hottest nights.
Twin fans add a useful trick: one side can blow in while the other blows out, which creates an exchange through a single window. Thermostats change how the fan behaves overnight, turning the fan on and off to hold a chosen temperature, so the fan stops when the room reaches the set point instead of running until morning.
Noise and night use
Noise figures in this category are patchy, and that is worth knowing before you buy. The Air King 9166F lists 64, 57, and 50 dB on high, medium, and low, and the Bionaire listing gives 30 dB, while other makers in this guide publish no noise figure at all.
For night use, a low speed that moves enough air at a hum you can sleep through matters more than a high speed you will never use after dark. A dimming display helps too, since a bright LED in a dark room can be as annoying as a loud motor. The Vornado auto dimming display addresses that, while the manual fans avoid the issue by having no display at all.
Sealing the gap around the fan
An exhaust fan only works if the opening around it is sealed. Every gap beside the fan is a path for hot air to come straight back in, which cancels the work the fan is doing. Accordion panels, extender screens, and foam blocks all close that gap tightly.
The Comfort Zone uses auto locking accordion expanders, the Bionaire uses a built in accordion panel plus an extra panel, and the Holmes uses an extender panel with an adjustable screen. The Vornado uses Soft-Fit foam blocks that tuck into the casing on either side. The Air King whole house fans use the Storm Guard system, which mounts the fan in front of the window so the sash can close behind it.
FAQ
These are the questions that come up most often when a reader first shops for a window exhaust fan, answered from the published figures in this guide and from general guidance on sizing, airflow direction, and night use. Read them before you measure the window.
Can a window exhaust fan cool a whole floor
Yes, with a large enough fan and a second opening to let fresh air in. A 1,200 square foot floor with an 8 foot ceiling holds 9,600 cubic feet of air, so a fan moving 3,560 CFM on high can turn that volume over in a few minutes, while a 2,470 CFM fan takes longer.
The real limit is the inlet, not the fan, so open a window on the cool side of the house. Whole house fans like the Air King 9166F and 9155 are built for this job, with published airflow at every speed. Run the large fan after sunset and keep the doors between rooms open while it runs.
Should a window fan blow in or out
Blow out when the air indoors is hotter than the air outside and you can open a second window elsewhere. Blow in when you want cool outdoor air delivered to one specific room. The fan does the same work either way, and what changes is which room gets the fresh air first.
On a hot evening, exhaust is usually the better choice, because it pulls built up indoor heat out while fresh air enters through a window on the cool side of the house. If you only have one window in the room, set a twin fan to exchange, with one side blowing in and the other blowing out, which gives the room fresh air and an exit path through the same opening.
Do you need two window fans
Usually not. A second fan is an extra purchase to do what an open window on the cool side of the house does for free, and the open window is almost always the better fix. One exhaust fan plus one open inlet window is the setup that works for most homes.
Two fans help only when the two openings are far apart and the path between them is broken up by doors and corners. Before buying a second fan, try the single fan with a wider inlet opening first, and run the fan when the outside air is cooler than the inside air.
Can any window fan work as an exhaust fan
Only if it reverses. Some fans reverse from a control on the unit or a remote, which is the kind worth buying, because the direction can change at night without moving the fan. Others reverse only by dismounting the fan and turning it around in the frame, which nobody keeps doing twice a day.
Every fan in this guide reverses from a control or a switch, and the guide states the method for each one. The Vornado flips with one button, the Bionaire and Holmes use independent reversible motors, the Comfort Zone uses a manual reverse control, and the Air King whole house fans use a rotary switch that sets intake or exhaust. A fan with no reverse mode can only blow in one direction, so it cannot push hot air out of the room.
Should you run a window fan all night
Yes, with one condition: leave a window open elsewhere in the house. A strong exhaust fan in a closed up house lowers indoor pressure slightly, and that can draw combustion gases back down the flue of a gas water heater, furnace, or fireplace. An open inlet window stops that.
Use the thermostat or the timer where the fan has one, so the fan stops when the room reaches the set temperature instead of running until morning. The Bionaire programmable thermostat and the Vornado auto mode both do this. Check the seal around the panels before bed.
Conclusion
Pick the Air King 9166F for a whole floor, the 9155 for a large room, and a twin fan for one bedroom, then open a second window on the cool side so the exhaust has air to pull in. Measure the opening first, confirm the reverse control, and the right fan will clear the heat night after night for your home.
Write Your Review
No reviews yet. Be the first to share your experience!