Key takeaways
- Compare eight bathing suits for hot tubs by fabric blend, cut, back style and listed chlorine resistance, with a care guide and answers to common questions.
Warm water, chlorine and bromine wear on swimwear faster than most people expect, and a suit that looks fine at the beach can sag or fade after a few soaks. This guide compares the best bathing suits for hot tubs by fabric, cut and listed chemical resistance, using only the details that each product page or review states.
Quick verdict on hot tub swimwear
Choose a suit with a high share of polyester or nylon and a modest share of spandex, a snug fit and a design with no loose trims. Of the eight picks, the See Her Swim Butterfly and Prana Tulum list the clearest chemical-resistance wording. Start there.
Fabric advice from hot tub makers is consistent. Nylon and polyester resist chlorine better than heavy spandex blends, cotton is a poor choice, and a dedicated tub suit lasts longer than your best beach suit. Decoration, metal fasteners and open backs are things to avoid.
None of the suits on this list is sold by its page as a hot tub suit. They are swim and surf suits that match the fabric advice, so treat the list as a shortlist and read the current listing and care label before you buy.
Comparison of the best bathing suits for hot tubs
This table compares the eight suits by style, fabric blend and listed resistance, and notes the main trade-off. Where a page does not state chlorine resistance, the table says so, since a suit that is not described as resistant may still be fine but is unproven.
| Suit | Style | Fabric listed | Chemical resistance listed | Main trade-off |
|---|---|---|---|---|
| See Her Swim The Butterfly | Racerback one-piece | 100% recycled polyester shell, PBT liner | Tester says it holds up to chlorine | Racerback straps |
| Prana Tulum Bikini | Two-piece | 78% recycled nylon, 22% elastane | Salt and chlorine resistant | Two-piece, higher spandex share |
| Carve Designs Camari | One-piece | 82% recycled polyester, 18% spandex | Not stated | Crossover back strap |
| Body Glove Smoothies Manny | Zip-up one-piece | 80% nylon, 20% spandex | Not stated | Zipper may be metal |
| Body Glove Mylene | High-neck one-piece | 80% nylon, 20% spandex | Not stated | Sliding racer back |
| Patagonia Sunny Tide | Tank one-piece | 83% recycled nylon, 17% spandex | Not stated | Strappy design |
| ZOGGS Fever Strikeback | Training one-piece | Ecolast material | Highly chlorine-resistant | Open back design |
| Krimson Klover Sandy Board Short | Board short | 89% recycled polyester, 11% spandex | Not stated | Shorts can trap heat |
How we selected these hot tub swimsuits
Each suit appears on a review page that gives its fabric blend and cut. Suits with no fabric detail were left out, and every percentage in the article is quoted exactly as the page states it, never estimated. Brand names appear only when the page names them, and nothing is guessed.
The list favors polyester and nylon blends and modest cuts, because hot tub makers advise those. It includes one-pieces, a bikini and a board short, so readers with different preferences can compare, and it flags the features that makers tell owners to avoid.
The writer has not worn these suits. Comments on fit come from the pages, and none of the suits is listed as made for hot tubs, so the advice here is about matching fabric guidance, not about tested durability. Sizes are not stated on the pages.
Best bathing suits for hot tubs: product picks
These eight suits run from a polyester racerback to a surf-style board short. Read the fabric and back-style notes closely, since a hot tub is a seated, warm, chemically treated setting that favors simple, snug suits with no loose parts. Compare fabric first.
See Her Swim The Butterfly One-Piece
The Butterfly is a racerback one-piece with a shell made entirely of recycled polyester, which is the fabric hot tub guides name most often as chlorine resistant. It is the closest fabric match on this list. It also has the plainest, most athletic profile on the list.
The review page lists a 100% recycled polyester shell with a PBT liner, a tight and streamlined fit, and four criss-crossing back straps. A tester comment says it will hold up to chlorine and salty ocean water. Sizes are not stated.
The racerback design is a swimming cut, so the straps cross your back. In a seated hot tub that is fine for most people, but if your tub has hard seat edges, check comfort on the current listing. It is a snug suit, so size carefully.
- Pros: 100% recycled polyester shell, tester note on chlorine, snug fit.
- Cons: criss-crossing straps may press when seated, and sizes are not stated.
Buy if fabric resistance is your priority. Skip if you want a looser, more relaxed suit.
Prana Tulum Bikini
The Tulum is a color-blocked two-piece with crisscross straps, and it is the only suit besides the Butterfly with a stated chemical-resistance line. It suits people who prefer a bikini cut for a soak. The page also lists a UPF rating, which suits owners who soak outdoors by day.
The page lists 78% recycled nylon and 22% elastane, says the fabric is salt and chlorine resistant, and lists UPF 50-plus coverage. The design is a two-piece with crisscross straps. Sizes are not stated.
The elastane share is higher than on the Butterfly, and hot tub guides note that heavier spandex blends wear out faster in chlorine. Two-piece suits also give less coverage, which matters if you share a tub with guests. Rinse promptly after each soak.
- Pros: chemical resistance stated, UPF 50-plus listed, nylon base.
- Cons: 22% elastane is a higher stretch share, and a bikini gives less coverage.
Buy if you want a bikini with stated resistance. Skip if you want a fuller-coverage suit.
Carve Designs Camari One-Piece
The Camari is a modest one-piece with a crossover back strap, a polyester-led blend and a UPF rating. It is a sensible middle option for owners who want coverage and a polyester base. It sits in the middle of the list for coverage and for how much the page tells you.
The review page lists 82% recycled polyester and 18% spandex, a crossover back strap, a modest cut and a UPF 50-plus rating. Chlorine resistance is not stated. Sizes are not stated either.
Polyester is the fabric hot tub guides favor, so the base is good, but the page does not call the suit chlorine resistant. Treat it as a reasonable candidate, and expect to rinse it carefully after soaks to extend its life.
- Pros: polyester-led blend, modest cut, UPF 50-plus.
- Cons: chlorine resistance is not stated, and sizes are not listed.
Buy if you want coverage and a polyester base. Skip if you need a stated resistance claim.
Body Glove Smoothies Manny One-Piece
The Manny is a zip-up one-piece with a mock neck and cap sleeves, and it is the most covered suit on this list. It suits people who want shoulders and chest covered in cooler air. It is a sporty design, and the page gives fewer details than for some other suits.
The page lists 80% nylon and 20% spandex, a 50 UPF protection rating, a zip-up front, a mock neck and cap sleeves. Chlorine resistance is not stated. Sizes are not stated.
Hot tub guides advise avoiding metal fasteners, and the page does not say what the zipper is made of. Check the listing, and rinse the suit well so the zipper stays free of chemical buildup. The higher coverage can feel warm in a hot tub.
- Pros: high coverage, nylon base, UPF protection.
- Cons: zipper material is not stated, and chlorine resistance is not listed.
Buy if you want maximum coverage. Skip if you want a light suit or if zippers worry you.
Body Glove Mylene One-Piece
The Mylene is a high-neck one-piece with a shelf bra and removable soft cups, so it offers built-in support without an underwire. It suits people who want structure without extra layers. It is the other Body Glove suit in this list, with a very different structure and feel.
The review page lists 80% nylon and 20% spandex, a high neck, and a sliding racer back with a shelf bra and removable soft cups. Chlorine resistance and sizes are not stated.
The racer back slides, which makes it easy to adjust but may mean more straps on the back. Removable cups are a plus for drying, since foam can hold water. Rinse the suit well and take the cups out to dry between soaks.
- Pros: shelf bra, removable cups, nylon base, high neck.
- Cons: chlorine resistance is not stated, and the sliding back adds strap parts.
Buy if you want built-in support. Skip if you prefer fewer parts to rinse and dry.
Patagonia Sunny Tide One-Piece
The Sunny Tide is a simple strappy tank suit with a mid-hip fit, and it is the plainest design here. It suits people who want a clean look without trims. The page describes it in very few words, so the notes below stay close to what it states and flag what is missing.
The page lists 83% recycled nylon and 17% spandex jersey, a simple strappy tank design, a mid-hip fit and moderate backside coverage. Chlorine resistance and sizes are not stated.
The nylon base matches hot tub guidance, and the lack of decoration is a plus. Strappy designs can leave marks if the straps are thin, so check how the straps sit when you are seated for a long time.
- Pros: nylon base, no decoration, simple cut.
- Cons: chlorine resistance is not stated, and straps are thin.
Buy if you want a plain, trim-free suit. Skip if you want more coverage or wide straps.
ZOGGS Fever Strikeback
The Fever Strikeback is a training suit from a swim brand, and its page uses the strongest wording on this list for chlorine. It is a good fabric match but has a back that hot tub guides caution about. It comes from a brand that focuses on pool training, and the page quotes it directly.
The review lists Ecolast material made using recycled plastic bottles and describes it as highly chlorine-resistant. It lists an open back design and a medium leg. Fabric percentages and sizes are not stated.
One spa guide advises against open-back designs, so this suit is a trade-off. If you accept the cut, the fabric claim is attractive. If you prefer a closed back, choose a different suit from this list.
- Pros: highly chlorine-resistant fabric listed, training-suit build.
- Cons: open back design, and blend percentages are not stated.
Buy if you want the strongest stated resistance. Skip if you want a closed back.
Krimson Klover Sandy Board Short
The Sandy is a board short with a polyester-led blend, and it is the only bottoms-only pick here. It suits people who prefer shorts, with the caveat that spa guides warn about them. The page describes it as board shorts, not as a typical swimsuit, which changes how it fits a soak.
The page lists 89% recycled polyester and 11% spandex, and describes unlined board shorts with a six-inch inseam. Chlorine resistance and sizes are not stated.
One spa guide advises against shorts or pants because they can trap heat. That is a general point, and some owners still prefer shorts. If you choose them, keep the fabric polyester-led, rinse well and avoid pockets with zippers or metal.
- Pros: polyester-led blend, low spandex share, unlined.
- Cons: shorts can trap heat, and chlorine resistance is not stated.
Buy if you want shorts and a polyester blend. Skip if you want a close, minimal suit.
How to choose bathing suits for hot tubs
The best hot tub suit is simple, snug and made from fabric that handles chemicals and heat. Use these points to narrow the list, and check the care label on any suit before you wear it in a tub. Work through them in order and you will rule out weak fits quickly and confidently.
Pick the right fabric blend
Hot tub makers recommend durable fabrics such as nylon and chlorine-resistant fabrics such as polyester. Spandex adds stretch but, in heavier blends, wears out faster in chlorine. Look for a high share of polyester or nylon and a modest share of spandex.
Avoid cotton and other absorbent fabrics, which get heavy and offer little sun protection. Synthetic suits can still fade in chlorine, but less than natural fibers, so expect some wear even with the right fabric.
Avoid decoration, fasteners and open backs
Spa guidance lists heavy decoration such as ruffles, bows and sequins, metal fasteners, string bikinis and sheer fabric as things to avoid. Open-back designs are on the same list. Plain suits last longer, rinse easier and sit better, so simplicity is a real advantage in a tub.
The reasons are practical. Decoration can irritate skin, metal can corrode, and thin or open designs can shift when you move. A plain, snug suit stays in place and rinses clean more easily.
Choose a cut that works for sitting
You will sit for long periods, so look at straps, seams and leg openings. Wide, flat straps are more comfortable than thin ones, and a mid-hip or medium leg fit avoids pinching. Comfort over an hour is different from comfort over a few minutes, so imagine a long seated soak as you read.
Consider coverage as well. One-pieces and high necks cover more, which can feel warm in a tub, while two-pieces give more freedom. Try a suit in the mirror seated before you commit.
Keep a dedicated hot tub suit
Caldera suggests a dedicated hot tub suit, and several guides say an older suit works if it is rinsed well. A dedicated suit avoids bringing lotion, sunscreen or lake and ocean contaminants into the tub. A second suit is a small step that protects both your swimwear and your water.
It also protects your favorite swimsuit from heat and chemical wear. If you keep two suits, rotate them so each dries fully between soaks.
Care for the suit after each soak
Rinse the suit well before and after each use and hang it to dry, ideally in the shade. Skip the washing machine and dryer, since heat and agitation shorten a suit’s life. A few minutes of care after each soak does more for a suit than any choice of fabric alone, and it takes almost no effort.
If you must wash it, rinse thoroughly, because leftover detergent or fabric softener causes foaming when the jets run. Do not leave a wet suit balled up in a bag, since it can grow mold and mildew.
Think about fit, modesty and shared tubs
Fit matters more in a hot tub than on a beach, because you sit still, move in warm water and often share the tub with friends or family. A suit that stays in place without constant adjusting makes the soak more relaxing for everyone involved, so fit deserves real attention.
Snug suits tend to stay put, and spa guidance recommends a snug fit for that reason. Sheer fabrics, string ties and open backs are on the avoid list, partly because they shift. If you soak in a shared or public tub, check any house rules on swimwear first, since some spas set their own requirements.
Think about the people you soak with as well. A one-piece or high-neck suit may feel more comfortable in mixed company, while a two-piece may suit a private backyard. Spa guidance says to go topless or nude only if everyone present agrees, and to wear a suit if you are unsure.
Finally, consider sun and weather. A UPF rating, such as the UPF 50-plus listed for some of these suits, only helps if the suit covers the skin you want covered, and it does not replace shade. Hot tub safety rules still apply, including never soaking alone, keeping children and pets away, avoiding alcohol and asking a doctor first if you are pregnant or have a heart or blood-pressure condition.
FAQ about swimwear for hot tubs
These answers cover what hot tub owners ask most about swimwear. They stay general because every suit and every tub is different, so read your care label and your tub manual, and follow common-sense safety rules for any soak. Answers are short and practical.
Does hot tub water damage swimsuits?
It can wear them faster. Heat and chemicals both stress fabric, and hot tub guides say suits with heavier spandex blends age quickly in chlorine. One spa company notes the evidence is anecdotal, not from formal studies. The honest answer is that it depends on fabric.
You can slow wear by choosing polyester or nylon, rinsing before and after, and avoiding the dryer. Even then, expect a suit to fade over time.
Can I wear a regular beach suit in a hot tub?
Many people do, but guides recommend a dedicated hot tub suit or a well-rinsed older suit. Beach and lake suits can carry minerals and contaminants into the water, and sunscreen or lotion residue affects water quality. Hot tub guides lean toward a dedicated suit.
If you do wear a beach suit, rinse it first and shower before you soak. That helps the tub and the suit.
Should I avoid shorts in a hot tub?
One spa guide advises avoiding shorts or pants because they can trap heat. Others do not mention it. If you choose board shorts, keep them polyester-led and simple, with no metal parts. Opinions differ, so read the guidance and decide what suits your comfort level and your tub rules.
Remember that comfort and safety come first. If you feel too warm, get out, cool down and drink water.
Why avoid cotton in a hot tub?
Cotton and other absorbent fabrics get heavy when wet, dry slowly and offer little sun protection. A heavy wet suit can also feel uncomfortable and may hold more chemicals against the skin. The reasons come down to weight, drying time and how fabric behaves when it stays wet in warm water.
Synthetic fabrics such as nylon and polyester dry faster and are what spa guides recommend. If a suit is a cotton blend, check the care label before wearing it in a tub.
How should I wash a suit used in a hot tub?
Rinse it in cold fresh water right after your soak, then hang it to dry in the shade. Avoid detergents and fabric softener, which can leave residue that foams when jets run. A gentle, simple routine works best, and it needs very little time or special products to follow properly.
If you need a deeper wash, hand wash gently and rinse completely. Avoid chlorine bleach, and follow the care label on the suit.
Conclusion
For fabric, the See Her Swim Butterfly and Prana Tulum have the clearest chemical-resistance wording, and the Carve Designs Camari offers a polyester-led one-piece. Keep the suit simple, rinse it after every soak, skip the dryer, and read the care label and your tub manual before the first soak in the water.
Write Your Review
No reviews yet. Be the first to share your experience!