Key takeaways
- Compare seven upholstery fabrics for reupholstering dining table chairs with kids, with maker-stated double rubs, content, cleaning codes, widths and DIY tips.
New fabric on tired dining chairs only pays off if it survives spills, backpacks and daily scooting. This guide compares seven woven performance fabrics, with specs copied from mill and maker pages, to help you pick the best fabric for reupholstering dining table chairs with kids and avoid costly redo work.
Quick verdict on the best fabric for reupholstering dining table chairs with kids
For a family table, Franklin and Arlo lead on listed abrasion ratings, Crypton Denali adds a barrier backing and Revolution Sugarshack a bleach-cleaning method, and Sunbrella Furniture Canvas adds a longer warranty. Each trade-off below comes from what the fabric page states.
Franklin lists 235,000 double rubs and a WS cleaning code in a plain polyester weave, which makes it the strongest on paper for hard daily use. Arlo lists 105,000 double rubs and a felted plain weave with the same WS code. Crypton Denali lists 100,000 double rubs, a W code and a Crypton barrier backing.
Endurepel Cocoon lists 100,000 double rubs and an Endurepel Shield finish described as stain and soil resistant, but its page lists no cleaning code. Sunbrella Furniture Canvas lists a lower 45,000 double rubs and a 5-year warranty on Sunbrella. Chateau lists 50,000 double rubs and a W code, and Revolution Sugarshack lists 85,000 double rubs with a bleach-cleaning method from the maker.
No fabric is stain-proof, so wipe spills fast and follow the maker’s cleaning notes for your exact color.
Comparison of dining chair upholstery fabrics
The table lines up the seven fabrics by content, listed abrasion rating, cleaning code or method, best use and main trade-off. Details come from the mill or maker pages we fetched, and any detail that a page does not state is marked as missing instead of guessed.
| Fabric | Content as listed | Double rubs as listed | Cleaning as listed | Main trade-off |
|---|---|---|---|---|
| Franklin | 100% polyester | 235,000 | WS code | Plain look, warranty of 2 years |
| Arlo Felted Plain Weave | 100% polyester | 105,000 | WS code | No warranty stated |
| Crypton Denali | Polyester, linen and nylon face, Crypton barrier | 100,000 | W code | Heavy at 38.8 oz/yd |
| Endurepel Cocoon | 100% polyester, acrylic backing | 100,000 | No code listed | Only four colors listed |
| Revolution Sugarshack | 100% polypropylene | 85,000 | Bleach cleanable per maker | Cleaning code not on the page |
| Chateau | Polyester and cotton face, acrylic backing | 50,000 | W code | Some colors discontinued |
| Sunbrella Furniture Canvas | 100% solution dyed acrylic | 45,000 | WS code | Lowest rub count of the group |
How we chose the best fabric for reupholstering dining table chairs
We looked for woven fabrics with a stated abrasion rating, a stated width and weight, and a stated use that includes residential seating or upholstery. We then compared cleaning codes, finishes and warranties, using only figures that each page gives.
Abrasion rating as a starting point
The double rub number comes from a Wyzenbeek test, and a higher count generally means longer wear before the fabric thins. One upholstery guide says dining chairs need at least 15,000 Wyzenbeek double rubs, with more than 30,000 for heavy use. All seven fabrics here list well above that.
Cleaning code and finish
The W code allows water-based cleaners, and WS allows water or a mild solvent for persistent stains. For dining chairs, both are practical because food and drink are the main messes. A finish such as Endurepel Shield or a Crypton barrier is a maker feature, not a guarantee.
What we did not use
Prices, ratings and stock are not covered, and nothing here comes from hands-on sewing or testing. Where a page does not state a detail such as a warranty or a cleaning code, we say so. Several colors on some pages are marked discontinued, so confirm availability.
Reviews of the best fabric for reupholstering dining table chairs with kids
Each review covers who the fabric suits, the content and ratings the page lists, the limits, the pros and cons, and a short buy-if and skip-if line. Order a swatch and test a spill on it at home before you commit to enough yardage for a full set of chairs.
Franklin
Franklin is a plain polyester weave for parents who want the highest listed rub count and a simple, solid look. It suits families that plan to reupholster a full set of chairs and want a fabric with a clear cleaning code, a stated warranty and plenty of color choices.
The Ennis page lists a face and backing of 100% polyester, a woven plain construction and a width of 56 in. (142 cm). The abrasion rating is 235,000 double rubs by the Wyzenbeek method, the weight is 410.1 gsm, 18.4 oz/yd and 12.1 oz/sq yd, and the roll size is 45 yds (41 m). The page lists 28 colors.
The cleaning code is WS, which allows water-based cleaners or foams and a mild solvent for persistent stains. The page lists a full warranty of 2 years, no intentionally added PFAS chemicals, and uses that include residential seating and upholstery. It says the fabric is stock unfinished, with an after treatment available through Endurepel Shield.
- Pro: the highest abrasion rating of the seven, at 235,000 double rubs.
- Pro: WS code and a 2-year warranty listed.
- Con: the page lists a solid style only, so it may feel plain.
- Con: it is stock unfinished, so any added stain treatment is a separate step.
Buy it if durability and a plain color range matter. Skip it if you want texture or pattern.
Arlo Felted Plain Weave Performance Fabric
Arlo is a felted plain weave for parents who want a high rub count with a slightly textured, felted surface. It suits dining rooms where the chairs get pulled in and out all day, and where a calm, muted solid color is the goal for the whole set of chairs.
The Ennis page lists a face and backing of 100% polyester, a width of 56 in. (142 cm) and an abrasion rating of 105,000 double rubs by the Wyzenbeek method. The weight is 420 gsm, 18.58 oz/yd and 12.39 oz/sq yd, and the roll size is 30 yds (27.4 m). The cleaning code is WS.
The page lists pilling at ASTM D3512 Class 4.5, an Endurepel Shield finish described as stain and soil resistant and anti-bacterial, and 15 colors. It lists no intentionally added PFAS chemicals and residential and contract industries. The page does not state a warranty.
- Pro: 105,000 double rubs and a WS code.
- Pro: an Endurepel Shield finish is named on the page.
- Con: no warranty is stated.
- Con: a felted look may not suit a very modern table.
Buy it if you want a textured solid. Skip it if you need a stated warranty.
Crypton Denali
Denali is a heavier Crypton fabric for parents who want a barrier backing, a clear W code and a rich, woven surface. It suits a formal-leaning dining room that still has to handle a busy family, and it works best on chairs that have firm, fresh foam under it.
The Ennis page lists a face of 94% polyester, 5% linen and 1% nylon, with a Crypton barrier backing and a width of 55 in. (142 cm). The abrasion rating is 100,000 double rubs by the Wyzenbeek method, and the weight is 24.5 oz/sq yd, 38.8 oz/yd and 831 gsm. The cleaning code is W, for water-based cleaners or foam.
The page lists CALTB117-2013, NFPA 260 Class 1, UFAC Class 1 and AB 2998 compliance, and uses that include residential seating, upholstery and indoor seating. It lists nine colors. The page does not state a warranty in the text we read.
- Pro: Crypton barrier backing, a W code and 100,000 double rubs.
- Pro: residential seating is a listed use.
- Con: at 38.8 oz/yd it is a heavy fabric to staple and fold.
- Con: no warranty found in the page text.
Buy it if you want a barrier-backed woven. Skip it if you prefer a lighter fabric for tight seat corners.
Endurepel Cocoon
Cocoon is a polyester upholstery fabric for parents who like the idea of a stain and soil resistant finish listed on the page. It suits a family that wants a soft-looking polyester and will check the care instructions with the mill before cleaning any spill on it.
The Ennis page lists a face of 100% polyester and a backing of 100% acrylic kiss coat. The width is 56 in. (142 cm), the abrasion rating is 100,000 double rubs by the Wyzenbeek method, and the weight is 370 gsm, 16.3 oz/yd and 10.9 oz/sq yd. The finish is Endurepel Shield, described as stain and soil resistant and anti-bacterial.
The page lists pilling at ASTM D3511 Class 5 and CALTB117-2013 fire retardancy, with a woven plain construction and four colors. It does not list a cleaning code or care instructions, and it does not state a warranty. Industries include residential, education, office seating and hospitality.
- Pro: 100,000 double rubs and a pilling rating of Class 5.
- Pro: lighter at 16.3 oz/yd than some choices.
- Con: no cleaning code or care text on the page.
- Con: only four colors are listed.
Buy it if you want a light, soft polyester. Skip it if you need a cleaning code on the spec sheet.
Revolution Sugarshack
Sugarshack is an olefin performance upholstery fabric for parents who want a maker that states bleach cleaning. It suits households with light and dark clothing on the chairs, and DIY upholsterers who prefer a fabric that the maker designs for indoor use at home.
The Revolution page lists 100% polypropylene, a width of 54 inches, an orientation of RR and 85,000 double rubs, with an application listed as indoor. The maker says its fabrics are stain-resistant and bleach-cleanable, dark colors included, using two ounces of bleach to 30 ounces of water in a 32-ounce spray bottle.
The maker also says stain-repellent treatments void the warranty, solvent-based products can damage the yarns and a power brush should not be used when vacuuming. A dining guide on the site advises ordering all yardage from one dye lot. The product page does not list a cleaning code, weight or warranty.
- Pro: bleach cleaning is stated by the maker.
- Pro: 85,000 double rubs for a woven olefin.
- Con: no cleaning code or weight on the page.
- Con: the maker advises against solvent products and stain-repellent sprays.
Buy it if bleach cleaning appeals. Skip it if you want a code-based spec sheet.
Chateau
Chateau is a polyester and cotton upholstery fabric for parents who want a modest rub count with a W code and a stated warranty. It suits a lower-use dining set, and it is a fit for families who like a classic residential look rather than a purely technical one.
The Ennis page lists a face of 85% polyester and 15% cotton, with a backing of 100% acrylic kiss coat. The width is 56 in. (142 cm), the abrasion rating is 50,000 double rubs by the Wyzenbeek method, and the weight is 440 gsm, 20.4 oz/yd and 12.9 oz/sq yd. The cleaning code is W.
The page lists a full warranty of 2 years and uses that include upholstery, pillows and residential seating. The color shown is 305 Cadet, and the page marks several other colors, including 9009 Onyx, 8003 Putty and 21 Mist, as discontinued, so check availability before ordering.
- Pro: W code and a 2-year warranty are listed.
- Pro: residential seating is a named use.
- Con: 50,000 double rubs is the second-lowest rating here.
- Con: several colors are discontinued.
Buy it if you want a classic look with a warranty. Skip it if you expect heavy daily use.
Sunbrella Furniture Canvas
Furniture Canvas is a solid acrylic canvas for parents who want the longest listed warranty and an indoor and outdoor rating. It suits dining sets that move between a porch and a kitchen, and chairs that sit in the sun beside large windows for much of the day.
The Ennis page lists 100% Sunbrella solution dyed acrylic, a woven plain construction and a width of 54 in. (137 cm). The weight is 264.5 gsm, 10.62 oz/yd and 7.8 oz/sq yd, the abrasion rating is 45,000 double rubs by the Wyzenbeek method, and the roll size is 60 yds (55 m). The cleaning code is WS.
The page lists a full warranty of 5 years on Sunbrella, Greenguard Gold and Oeko-Tex Standard 100 certifications, a water repellent, stain and soil resistant finish, and uses that include residential seating and indoor and outdoor. It cautions that excessive heat during washing or cleaning will shrink the fabric.
- Pro: a 5-year warranty and WS code are listed.
- Pro: indoor and outdoor use and Greenguard Gold.
- Con: the lowest rub count of the seven, at 45,000.
- Con: light at 10.62 oz/yd, so it may need batting for body.
Buy it if warranty and outdoor use matter. Skip it if you want the highest rub count.
Buying guide for reupholstering dining chairs in a family home
Choosing fabric is only half of the job. Fit, foam, tools and yardage decide whether the finished chair looks neat and lasts. The five notes below cover what to check before you order, and how to avoid the common mistakes that families make when they reupholster.
Drop-in seat or fully upholstered chair
Drop-in seats lift out and take a rectangle of fabric stapled underneath, so they suit beginners. Fully upholstered chairs need more yardage, careful pleats and sometimes sewing. Heavy fabrics such as Denali add bulk at corners, so test on a seat before cutting for the whole set.
How much fabric to order
Yardage is easy to underestimate for a full set. One maker guide says roughly three-quarters to one yard per standard seat, with more for fully upholstered chairs. Measure each seat, add a margin on all sides for stapling and ask the seller whether cut fabric can be returned.
Foam, batting and staples
Fresh foam under new fabric gives a cleaner finish than reusing flat foam, and a layer of batting rounds the edges and hides small bumps. Use staples long enough to hold the fabric without piercing the frame, and pull the fabric taut but never stretched out of shape.
Railroaded, pattern and dye lot
Some fabrics are railroaded, meaning the pattern or weave direction runs across the roll, and pages list this in different ways. Check the listing before you plan your cuts, and order all of your yardage at once so the dye lot matches across the whole set of chairs.
Color and pattern choices for family tables
Color changes how much a dining chair shows. Mid-tone solids and fabrics with a little texture tend to hide small marks better than very light plains, though dark fabrics show crumbs and dust. Pick a color you can live with when the chairs are slightly dirty.
Several fabrics here list many colors, such as Franklin with 28 and Arlo with 15, while Cocoon lists four. A wider range makes it easier to match an existing rug or wall color, but ask for swatches and look at them in daylight and at night, because lighting changes how a fabric reads.
Patterns that need matching add waste and extra yardage. A solid or a subtle texture is simpler for a first reupholstery project and is easier to repair or replace later if one chair is damaged.
Care once the chairs are done
Use only the cleaners the maker names and test a hidden spot first. Revolution says stain-repellent sprays void its warranty, and Sunbrella warns against heat during washing. Clean spills quickly, vacuum gently and keep a swatch together with the care notes for later.
Frequently asked questions about reupholstering dining chairs
These answers cover common questions from parents who are redoing dining chairs. They stay general where pages give no figure, and they point you back to the maker for any detail that depends on your specific color, your dye lot or the way that your chairs are built.
Is it cheaper to reupholster or replace chairs?
It depends on the frames and your skill. Sound frames with drop-in seats are often worth redoing, while loose or damaged frames may be better replaced. This guide does not compare costs, so get your own measurements and quotes before you decide what is worth doing.
What cleaning code should I look for?
For a family table, W or WS is the practical range because food and drink are the usual messes. A W code allows water-based cleaners, and WS allows water or a mild solvent for persistent stains. Avoid S and X codes for dining use, since they limit how you can clean.
Do I need a stain treatment on new fabric?
Not always. Some makers add their own finish, and others warn that aftermarket treatments void the warranty. Read the page for your fabric before you spray anything on it, and ask the mill or the seller if the page is unclear about treatments or care at all.
Will a higher double rub count always last longer?
Not by itself. The number measures abrasion resistance in a lab test, and one mill page notes that results above guideline levels do not show product lifespan. Seams, foam, cleaning habits and daily use all matter too, so treat the figure as one input among several.
Can I use vinyl instead of woven fabric?
Yes, and vinyl wipes clean easily, but it is a different material with its own sewing and stapling needs. One upholstery guide notes that vinyl can be stiff and may need a heat gun for DIY installation, so test a small piece on one seat before you buy for the whole set.
Should I reupholster all chairs at once?
Yes if you can, because fabric from the same dye lot matches across the set. Doing one chair at a time risks a mismatch if the mill runs a new lot. Order a little extra yardage so you can fix a mistake or replace a worn cover later on, and keep the swatch.
Conclusion
Franklin and Arlo give the highest listed rub counts with WS codes, Crypton Denali adds a barrier backing, and Sunbrella Furniture Canvas offers the longest listed warranty. Order swatches, buy all yardage at once, replace old foam and follow each maker’s cleaning notes. Wipe spills quickly every time they happen.
Write Your Review
No reviews yet. Be the first to share your experience!