Key takeaways
- Six espresso machines for coffee shops compared on group count, boiler setup and temperature control, from dual boiler flagships to a design-led single boiler.
The espresso machines for coffee shops in this guide are the commercial models built for cafe pressure. The six picks span dual boiler and multi-boiler flagships, a single boiler design piece with digital group temperature, and group counts from two to three, with every boiler size, dimension and control stated by the maker or its listing.
Quick verdict: espresso machines for coffee shops compared
The right choice among espresso machines for coffee shops starts with peak-hour volume, because group count and boiler capacity decide whether the bar keeps up. After that, temperature control separates the flagships from the workhorses. The table below lines up all six machines on the figures their makers publish, so the shortlist builds itself.
| Machine | Groups | Boiler setup | Temperature control | Width | Standout feature |
|---|---|---|---|---|---|
| La Marzocco GB5 S AV | 2 | Dual boiler: 3.4 L brew, 7 L steam | Dual PID | 29 in | ABR scales with Drip Prediction |
| Sanremo D8 | 2 | Single boiler, 7 L AISI 316L steel | Digital group temperature, 90 to 98 degrees C | 808 mm | Programmable boiler pressure settings |
| Faema E71e | 2 or 3 | 0.6 L coffee boiler per group, 7 L Smart Boiler | GTi infusion control, PID | 31.1 in (2 group) | Manual lever or touchscreen control per group |
| Astoria Storm | 2 or 3 | 8.5 L steam boiler, 1.2 to 1.5 L brew boiler per group | Independent per-group control | 103 cm (2 group) | Five designer finishes including copper |
| Rancilio Classe 20 ASB | 2 (3 also offered) | 11 L main boiler, 150 ml micro-boiler per group | Advanced Steady Brew, per-group settings | 30.5 in | 4.3 inch touchscreen, X-Tea hot water |
| La Cimbali M100 Attiva HDA | 3 | 10 L service boiler, 3 coffee boilers of 400 cc | HDA pressure profiling, per-group temperature | 1032 mm | Pressure profile for every drink selection |
Two architectures dominate the table. Five of the six machines split brewing and steaming across separate boilers, either as a classic dual boiler or as a multi-boiler layout with a small boiler at every group, while the Sanremo D8 takes the opposite route with one large stainless boiler and electronic group temperature control. Neither approach is automatically better: the multi-boiler machines offer per-group temperatures for running two coffees at once, and the D8 counters with a simpler hydraulic layout and fast service access.
How we selected these machines
Every machine here is a plumbed, commercial model sold for coffee shop service, with at least two groups and a boiler capacity, power requirement and footprint. Home and prosumer machines were left out, however capable, because a shop’s buying decision turns on throughput, serviceability and requirements that home equipment never has to meet.
The set was also built to be genuinely different from a standard cafe shortlist. It mixes Italian makers with long commercial histories, Rancilio building equipment since 1927 and Astoria since 1969, with newer electronic platforms built around touchscreens, pressure profiling and app-connected diagnostics. Control styles range from the Faema’s manual lever work to the La Cimbali’s programmed pressure profiles, so the guide covers shops that staff career baristas and shops that need repeatability from a rotating team.
The best espresso machines for coffee shops, model by model
Six machines made the final set, and each one answers a different kind of coffee shop. A two-group dual boiler suits the focused specialty bar, a three-group multi-boiler suits the high-volume flagship, and the design-led models suit shops where the machine is part of the room. Read each entry against your peak hour, your menu and your counter.
La Marzocco GB5 S AV
The GB5 S is La Marzocco’s second-generation cafe flagship, a 2 group dual boiler machine with a 3.4 liter brew boiler and a 7 liter steam boiler. Dual PID control manages coffee and steam temperatures separately, saturated groups hold thermal stability, and programmable volumetric doses keep shots repeatable when the bar is three drinks deep.
The AV configuration’s party piece is the ABR option: integrated scales with Drip Prediction technology, which weighs the shot as it pours and anticipates the drip to land on the intended shot mass. Piero group caps rework the internal water path for temperature stability, insulated boilers cut energy use, and an eco mode drops the machine into standby during quiet hours. A digital display handles programming, dimmable barista lights adjust to the room, and 24V electronics are there to improve reliability and simplify diagnostics.
Installation is serious commercial work: the machine is 29 inches wide, weighs 150 pounds, and runs on 208 to 240 volt service drawing 5200 watts on a 30 amp circuit. It carries UL-197, NSF-8 and CAN/CSA-C22.2 No. 109 certifications. Details like the steam valve that can be rebuilt from the front, without removing it, show where the design effort went: uptime. Choose the GB5 S if your shop sells precision and consistency as its headline act.
Sanremo D8
The D8 is Sanremo’s 2 group machine, built around a single AISI 316L boiler of 7 liters with digitally controlled group temperature. Each group can be set between 90 and 98 degrees C from the push-button panel, and the boiler pressure is programmable at 1.0, 1.2 or 1.4 bar, a menu-level adjustment most single boiler machines do not offer.
A chromed brass ring group, electronically controlled, holds the extraction temperature, and a high-performance volumetric pump is specified to deliver constant pressure during simultaneous use of multiple functions. A shot timer supports consistency, an electronic autolevel keeps the boiler filled, and a dual-reading gauge shows line, boiler and brewing pressures together. The programmable automatic cleaning cycle runs multi-stage group washing, and simplified internal access is designed to shorten service visits.
The listing positions the D8 for shops pulling 150 to 400 drinks a day, and the machine measures 808 mm wide and 61.5 kg net, on 240 volt service. Optional IoT connectivity adds app-based monitoring and control, and the Total White finish of the listed version is a deliberate visual statement. Pick the D8 if your shop’s identity is design-led and your volume sits in the busy middle rather than at the three-group extreme.
Faema E71e
The E71e is Faema’s flagship, offered in 2 and 3 group versions with an independent 0.6 liter coffee boiler at each group and a 7 liter Smart Boiler for steam. Its GTi infusion control manages the infusion stage, PID control holds brew temperature, and the pump pressure is adjustable, a combination aimed at shops that work coffee by coffee.
Control is the story here. Each group can be worked manually with a lever or through the touchscreen programming, volumetric and manual dosing sit side by side, and a built-in shot timer keeps the barista honest. Two cool touch steam wands use a multistage valve with high, low and purge functions, the hot water spout delivers three timed doses at customizable temperatures, and a hot water economizer is fitted. IMS precision filter baskets and an automatic washing system round out the working details.
The styling is by Giugiaro Design, and the reduced height is deliberate: it keeps the barista’s eye line open to the customer across the machine. The 2 group version is 31.1 inches wide, weighs 140 pounds and draws 4,500 to 5,500 watts on 208 to 240 volt service; the 3 group stretches to 40.1 inches and 180 pounds. Choose the E71e if your shop’s identity is built on barista craft performed in full view of the room.
Astoria Storm
The Storm is Astoria’s flagship, a multi-boiler machine from CMA in Susegana, Italy, where the company has built machines since 1969. It pairs an 8.5 liter steam boiler with a brew boiler at each group, 1.2 liters per group on the 2 group version and 1.5 liters per group on the 3 group, each independently controlled for stable temperatures.
Where the Storm separates itself is presence. It is offered in five finishes, matt black with chrome or black trim, red, white and an exclusive copper that develops a natural patina over time, and the listing frames the machine as a visual centerpiece as much as a work tool. The engineering underneath matches the brief: heavy-duty stainless steel construction, plumbed-only operation, and per-group boilers that let two coffees run at different temperatures on the same bar.
The 2 group Storm is 103 cm wide and 85 kg on a 25 amp service, positioned by the listing for up to roughly 250 cups a day; the 3 group grows to 117 cm, 105 kg and 32 amps, aimed at 350 to 500 plus cups a day in hotels, restaurants and high-demand specialty cafes. Pick the Storm if your shop is a destination space, a roaster’s flagship bar or a boutique hotel where the machine anchors the room’s design.
Rancilio Classe 20 ASB
The Classe 20 ASB is Rancilio’s multi-boiler flagship, built by a company making commercial espresso equipment since 1927. Its Advanced Steady Brew system puts a 150 ml micro-boiler at each group, alongside an 11 liter main boiler on the 2 group version, so water and group stay at a constant temperature and each group can be set differently.
The interface is a 4.3 inch touchscreen with a digital display per group showing extraction parameters in real time. Each micro-boiler pairs with its own heating element, the hardware behind the Advanced Steady Brew name. X-Tea programs hot water dosages and temperature levels for tea service, the C-lever steam valve works with a 25 degree rotation of the knob, and the cool touch steam wand is insulated with a double-layer coating. ABM software manages the boiler under intensive use, pre-empting pressure drops when brewing, steaming and hot water run together, and Easy Clean runs scheduled automatic cleaning cycles with alerts and history.
The 2 group machine is 30.5 inches wide, weighs 163.1 pounds and runs on 220 to 240 volt service at 5,210 to 5,350 watts; a 3 group version with a 16 liter boiler is also offered, and a Tall version raises cup clearance to 14.5 cm. The brass portafilter takes filters up to 21 g. Choose the Classe 20 ASB if your shop wants per-group temperature control and modern diagnostics without stepping up to pressure profiling.
La Cimbali M100 Attiva HDA
The M100 Attiva is La Cimbali’s flagship, and the HDA version is the 3 group touch display model. Its HDA system manages the pressure profile for every drink selection and adds an infusion stage, while the multiboiler layout, a 10 liter service boiler plus three independent 400 cc coffee boilers, lets each group’s temperature be adjusted.
Pressure profiling is the differentiator: instead of a fixed pump pressure, the barista’s selections carry their own profiles, which the maker says makes profiles more repeatable from drink to drink. Around that core sit two cold touch steam wands, a hot water wand with three selections, an electrical cup warmer with three temperature settings, Bluetooth and a USB port, and the maker’s ECO Green Machine energy features. Stainless steel portafilters are part of the package.
The machine is 1032 mm wide and weighs 105 kg, and the Attiva range is finished in matt black, matt grey or glossy white with a redesigned rear panel and LED bar. It is the most technology-dense machine in this guide, aimed at shops that want to program extraction rather than improvise it. Pick the M100 Attiva HDA if your menu runs several coffees and drink styles that each deserve their own pressure and temperature recipe.
Buying guide: specifying a machine for a coffee shop
A commercial machine is a ten-year decision, plumbed into your water and wired into your panel. The five checks below follow the order that matters: throughput first, then thermal architecture, control depth, installation reality, and the service routine that keeps it earning. Specs quoted are the makers’ figures for the machines in this guide.
Size the group count to your peak hour
Group count is a peak-hour decision, not a daily-total decision, because a shop’s drinks arrive in bursts. Two groups let two baristas work in parallel and cover most cafes; the listings here position 2 group machines from 150 to 400 drinks a day depending on the model, with the Storm’s 2 group rated by its seller at up to about 250 cups.
Three groups earn their counter space when two baristas pulling shots still leave a queue, or when a third station for a second coffee or a dedicated decaf makes service smoother. The step up is not just width: the 3 group versions here grow boilers, weight and electrical draw together, from the E71e’s 40.1 inches and 6,200 to 7,400 watts to the Storm’s 32 amp service. Buy for the busiest hour you actually expect, with modest headroom, rather than for the busiest hour you can imagine.
Choose a boiler architecture, not just a size
Boiler layout decides how temperature behaves under load. Dual boiler machines like the GB5 S use separate brew and steam boilers, so steaming never steals heat from brewing. Multi-boiler machines go further, putting a boiler at each group, 0.6 liters on the E71e, 150 ml micro-boilers on the Classe 20, so each group can hold its own temperature.
The single boiler alternative, the Sanremo D8, shows the other philosophy: one large 7 liter stainless boiler, an electronically controlled ring group and digitally set group temperature between 90 and 98 degrees C. It trades per-group independence for a simpler hydraulic path and programmable boiler pressure. Shops running one coffee all day lose little with the simpler layout; shops running a light roast beside a house blend should pay for per-group control.
Decide how much control your team will use
Control depth pays only when the team uses it. The E71e offers manual lever work beside its touchscreen, built for baristas who adjust by feel. At the other, the M100 Attiva’s HDA system stores a pressure profile for every selection, and the GB5 S’s ABR scales stop shots by mass, both designed to make a new hire’s shots match a veteran’s.
Volumetric dosing is the baseline consistency tool and appears across this guide in different forms, from the D8’s volumetric pump to the E71e’s volumetric and manual dosing. Match the machine to your staffing reality: a shop with high turnover should weight programmed repeatability heavily, while a stable, experienced team can exploit manual control that a programmed machine would only constrain.
Plan power, plumbing and counter before you fall in love
Every machine here is plumbed and runs on commercial power, so installation is part of the purchase. The draws in this set run from the D8’s 240 volt service to the GB5 S’s 30 amp, 208 to 240 volt circuit at 5200 watts, and none of them plug into a household outlet. A licensed electrician confirming the circuit is a line item, not an afterthought.
Footprint and weight matter just as much: widths run from 29 inches for the GB5 S to 1032 mm for the M100 Attiva, and weights from 61.5 kg for the D8 to 105 kg for the Storm 3 group and the M100. The counter must carry the machine plus a grinder, and the Storm’s listing is explicit that its 85 to 105 kg needs a solid, level countertop with a shutoff valve and drain. Measure the bar, the door it enters through, and the service clearances before signing.
Plan for water treatment and service access
Water is the machine’s diet, and makers treat it as a warranty-level issue: one listing in this guide states that the absence of soft water filtration can void the machine’s warranty. Scale attacks boilers and heating elements, so filtration sized to your hardness belongs in the installation plan from day one, not after the first breakdown.
Service access separates thoughtful designs from pretty ones. The GB5 S’s steam valve rebuilds from the front, the D8 advertises simplified internal access, and the Classe 20’s diagnostics let a technician test circuits from the touchscreen. Automatic cleaning cycles on the D8, E71e and Classe 20 cut closing-time labor, but they do not replace scheduled professional service. Ask who services the machine locally before you buy, because a flagship without a local technician is a liability.
Frequently asked questions
Opening or upgrading a coffee shop raises the same machine questions every time: how many groups, which boiler layout, what the electrician needs to hear, and whether one machine can run two coffees well. The answers below use the figures and features stated for the six machines in this guide, so they double as a checklist for your own shortlist.
How many groups do espresso machines for coffee shops need?
Most independent coffee shops need two groups, which allow two baristas to work at once and match the volumes the listings attach to 2 group machines here, from the D8’s 150 to 400 drinks a day positioning to the Storm 2 group’s roughly 250 cups. Three groups suit high-volume sites where the queue, not the machine, is the bottleneck.
The honest test is your peak thirty minutes. Count the drinks in your busiest half hour, and if two groups running continuously cannot clear them with a reasonable wait, the third group is a revenue purchase rather than a luxury. Remember that the 3 group versions here also raise power draw and width substantially, so the decision lands on the electrician and the counter as much as on the menu.
What is the difference between dual boiler and multi-boiler?
A dual boiler machine, like the GB5 S, runs one boiler for brewing and one for steam, 3.4 and 7 liters in that case, so the two jobs never compete for heat. A multi-boiler machine adds a small boiler at each group, as on the E71e, the Classe 20 ASB and the Storm, which allows a different temperature to be set at every group.
That per-group independence is the practical difference: a multi-boiler bar can run a light roast at one group and a darker house blend at another, each at its own temperature, while a dual boiler bar sets one brew temperature for the whole machine. Multi-boiler layouts also spread the heating load, which helps recovery during long rushes. Dual boiler remains the simpler, proven layout for single-coffee shops.
What electrical service does a commercial machine need?
Commercial service, in every case here. The machines in this guide run on 208 to 240 volt circuits, with draws such as 5200 watts and 30 amps for the GB5 S, 4,500 to 5,500 watts for the 2 group E71e, and 25 to 32 amps across the Storm range. None of them can share a circuit with the grinder and the fridge as an afterthought.
Have a licensed electrician confirm the panel capacity and the dedicated circuit before the machine arrives, and confirm the exact configuration when ordering, because several models offer voltage and phase variants. The listings are blunt about this: these machines are built for fixed commercial locations, and the installation visit is part of the purchase, sometimes bundled by the seller, as with the E71e listing’s included installation.
Can one machine run two different coffees well?
Yes, if it has per-group temperature control. The multi-boiler machines here, the E71e with its independent group boilers, the Classe 20 ASB with per-group micro-boilers, the Storm with independently controlled brew boilers and the M100 Attiva with per-group temperature adjustment, are all built to hold different temperatures at different groups.
Pair that with two grinders and the bar can run a house blend and a rotating single origin side by side, each extracted at its own setting. A dual boiler machine like the GB5 S can still serve two coffees, but both groups share one brew temperature, so the pairing works best when the two coffees are happy at similar settings. The D8 splits the difference with digitally set group temperature across its groups from a single boiler.
How much do cleaning and maintenance features matter?
More than the brochure suggests, because they run every day. Automatic cleaning on the D8, the E71e’s automatic washing system and the Classe 20’s Easy Clean with scheduled cycles, alerts and cleaning history all convert a skilled closing task into a supervised routine, which protects group heads and keeps flavors clean across a rotating staff.
Diagnostics matter on the bad days: the Classe 20’s service menu tests circuits from the touchscreen, and the GB5 S’s front-rebuild steam valve shortens a common repair. None of this replaces water treatment or professional servicing, and one listing here ties filtration directly to warranty coverage. Treat cleaning automation as a labor and consistency feature, and service access as an uptime feature; both belong in the buying decision.
Conclusion
For most coffee shops the shortlist narrows fast: the GB5 S for scale-weighed precision, the D8 for design-led mid-volume bars, the E71e for barista craft in view, the Storm for a destination room, the Classe 20 ASB for touchscreen multi-boiler value, and the M100 Attiva HDA for programmed pressure profiling at flagship scale.