Key takeaways
- Compare flat griddle pans for gas grills by material, cooking area, grease handling, and weight, from cast iron reversible pans to stainless grill-top trays.
A gas grill grate handles steaks and chops well, but eggs, pancakes, onions, and smash burgers fall through or stick to the bars. A set of flat griddle pans for gas grills adds a solid plate over the burners, and the right plate depends on grill size, grease control, and how much weight the cook will lift.
Quick verdict
The Little Griddle Sizzle-Q SQ180 is the stainless pick with a full-width grease well and sidewalls, the Lodge Logic Pro is the cast iron pick at 20 by 10.5 inches, and the Cuisinart CCP-2000 is the smaller reversible cast iron plate for cooks who also want a ribbed grill side in the same pan.
Material splits the group first. Cast iron plates, the Lodge, the Cuisinart, and the Bobby Flay by GreenPan, hold heat through lid openings and take a seasoning layer, but they weigh more and need hand washing and oil after use. Stainless trays, the Little Griddle, the Stanbroil, and the onlyfire, skip seasoning, resist rust, and scrape clean on the grill, but thin builds can warp without bracing, which is why two of the three stainless picks list underside cross-bracing.
Size splits it second. Cooking areas here run from the Cuisinart plate at 15.75 by 9 inches to the Stanbroil tray at 18 by 13 inches, and the Lodge plate stretches 20 inches long to span two burners. Measure the grate before buying: a plate that covers every burner leaves no open grate for items that still need direct flame, and a plate that overhangs the firebox will not let the lid close.
| Product | Type | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Lodge Logic Pro Reversible Grill/Griddle (LPG13) | Cast iron reversible plate | Two-burner coverage and grill marks | 20 by 10.5 inches, grease gutter | Heavy cast iron, hand wash only |
| Little Griddle Sizzle-Q SQ180 | Stainless grill-top tray | Grease control on big cooks | 14-gauge stainless, full-width grease well | 9 pounds, hand wash |
| Cuisinart Reversible Cast Iron Griddle/Grill Plate (CCP-2000) | Cast iron reversible plate | Smaller grills, two surfaces | Cooking area 15.75 by 9 inches, 12.93 lbs | Smallest cooking area here |
| Bobby Flay by GreenPan Reversible Cast Iron Grill Griddle | Cast iron reversible pan | Stovetop and grill crossover | 9.5 by 16.5 inches, high grill ridges | Maker page lists no weight |
| Stanbroil Universal Stainless Steel Griddle | Stainless grill-top tray | Largest flat cooking area | Cooking dimension 18 by 13 inches | Listing gives few build details |
| onlyfire Stainless Steel BBQ Cooking Griddle | Stainless grill-top tray | Two-handle lifting | 18 by 12 inches, 3.95 kg, 2 handles | Listing gives no gauge or bracing detail |
How we selected
Each pick comes from a product, maker, or listing page opened for this guide, and every dimension, weight, and material in the article traces to one of those pages. Pans with no readable page, no stated size, or no stated material were left out, and plates built for one grill brand only were skipped for pans that sit on a standard grate.
Fit for a gas grill drove the shortlist. A pick had to sit on the grate over the burners rather than replace the grate as a brand part, and it had to state a flat cooking surface, since the keyword asks for flat griddle pans. Grease handling counted next, because a flat plate over open burners collects fat that a grate would drip away, and then came care: cast iron seasoning against stainless scraping. Figures are the makers’ listed numbers, presented as listed claims.
Flat griddle pans for gas grills: the six picks
The six picks divide into three cast iron reversible plates and three stainless grill-top trays. Each entry gives the listed size and material, the cooks those figures suit, and the limits that should move a buyer to a different pick, including care steps the maker or listing page spells out.
Lodge Logic Pro Reversible Grill/Griddle (LPG13)
The Lodge Logic Pro measures 20 inches long and 10.5 inches wide in cast iron, with a smooth griddle side and a ribbed grill side. The listing describes a slight slope that directs grease into a generous grease gutter, two easy grip handles for lifting and flipping, and a seasoned oil finish, with care listed as hand wash, dry, and oil.
Length is the case for this plate. At 20 inches it fits over two stovetop burners indoors and spans two burner zones on a gas grill, so pancakes cook on the flat side while the ribbed side stays free for a second job on another day. The grease gutter matters on a grill: bacon fat on a flat plate has nowhere to go, and the slope gives it a channel instead of a pool around the food.
The limits are weight and care. Cast iron at this size is a two-hand lift, and the listing fields give a weight figure without a unit, so buyers should expect a heavy plate and confirm the exact figure on the listing page before ordering. Seasoning also means no soaking and no dishwasher, and the plate needs dry storage so the finish holds.
- Pro: 20 inch length spans two burner zones
- Pro: reversible, smooth griddle and ribbed grill sides
- Pro: slight slope feeds a generous grease gutter
- Con: heavy cast iron with hand wash and oil care
- Con: listing weight field gives no unit
Buy it if one plate should cover breakfast on the flat side and marked steaks on the ribbed side, on the grill and the stove alike. Skip it if lifting a heavy plate on and off the grill is a problem, where a lighter stainless tray below is easier to handle.
Little Griddle Sizzle-Q SQ180
The Sizzle-Q SQ180 is built from 100 percent stainless steel in 14-gauge sheet, measures 17.7 inches long, 13 inches wide, and 3 inches thick at the walls, and weighs 9 pounds. The maker describes a full-width grease well, generous sidewalls, and a patented vented cross-brace system under the plate for even heating and strength.
This is the pick for messy, high-volume flat-top work on a gas grill: onions, peppers, bacon, and chopped steak that shed fat and juice as they cook. The grease well runs the full width, so runoff collects in one channel instead of spilling over the front edge, and the sidewalls keep food on the plate when the cook works a spatula fast. The maker lists use with gas and charcoal grills, and care as hand wash, with cleaning done warm on the grill using a stainless steel scraper per the maker page.
On limits, 9 pounds is not light, and the 3 inch walls that hold food in also make the tray bulky to store in a shallow cabinet. The maker lists hand wash only, and stainless shows heat tint over time, which is cosmetic but worth knowing for buyers who want a plate that stays bright.
- Pro: 14-gauge stainless with vented cross-bracing
- Pro: full-width grease well and generous sidewalls
- Pro: no seasoning, scrape clean on the grill
- Con: 9 pounds with bulky 3 inch walls
- Con: hand wash only per the maker
Buy it for big, greasy cooks on a mid-size or large gas grill where runoff control decides the result. Skip it for a small grill, where the 17.7 by 13 inch footprint can crowd out all open grate space.
Cuisinart Reversible Cast Iron Griddle/Grill Plate (CCP-2000)
The Cuisinart CCP-2000 is a heavy-duty cast iron plate with a cooking area of 15.75 inches long by 9 inches wide and overall dimensions of 19 inches by 9.75 inches with handles, at a listed weight of 12.93 lbs. The maker sheet lists a ribbed grill side for sear marks and a smooth flat side for bacon, eggs, and similar work.
The smaller cooking area is the point. On a compact two-burner or three-burner gas grill, a 20 inch plate can cover the whole grate and block the lid or the warming rack, while this plate leaves a strip of open grate beside it for direct-flame items. The maker sheet says to place the plate on an outdoor grill or over 2 stove top burners, so it crosses over to indoor use on days the weather turns.
The trade-off is batch size. A 15.75 by 9 inch cooking area cooks breakfast for two or three people in one pass, not a crowd, and big families will cook in rounds. At 12.93 lbs it is also dense for its size, and like the other cast iron picks it needs seasoning care rather than a quick scrape.
- Pro: compact cooking area suits smaller grills
- Pro: ribbed and smooth sides in one plate
- Pro: listed weight given, 12.93 lbs
- Con: smallest cooking area in this group
- Con: cast iron seasoning care
Buy it for a small grill and a small household, where leaving open grate beside the plate matters. Skip it for crowd cooking, where the Stanbroil or Sizzle-Q trays give more flat area per load.
Bobby Flay by GreenPan Reversible Cast Iron Grill Griddle
The Bobby Flay by GreenPan griddle measures 9.5 inches by 16.5 inches in cast iron, with high grill ridges on one side and a smooth griddle on the other. The maker page lists it as suitable for any cooking surface, naming stovetop, grill, oven, and open flame, and shows the product in stock on the maker site.
The high ridges set this one apart among the reversible plates. The Lodge and Cuisinart ribbed sides are drawn for marks, and this maker calls out high ridges by name, which lifts food farther off the fat that collects between the ribs. The 16.5 inch length sits between the Cuisinart and the Lodge in span, covering one wide burner zone on most gas grills while leaving grate space open.
The maker page is thin on numbers: it gives the footprint but no weight, no thickness, and no grease channel detail. A buyer who needs a listed weight for a weak wrist, or a gutter for fatty cooks, will find more stated figures in the Lodge and Little Griddle pages than here.
- Pro: high grill ridges named by the maker
- Pro: mid-size 9.5 by 16.5 inch footprint
- Pro: listed for stovetop, grill, oven, and open flame
- Con: no weight or thickness on the maker page
- Con: no grease channel detail stated
Buy it if ridge height matters and one pan should move between the stove and the grill. Skip it if stated specs drive the purchase, since this maker page lists fewer figures than the other cast iron picks.
Stanbroil Universal Stainless Steel Griddle
The Stanbroil tray gives a cooking dimension of 18 by 13 inches in stainless steel, the largest flat area in this group, with underside cross-bracing that the maker credits for balanced heat distribution. The listing describes the unit for charcoal and gas grills and for camping and party use away from home.
Area is the argument. An 18 by 13 inch plate holds a full breakfast load or a double row of burgers without crowding, and crowding is what steams food instead of browning it on a flat top. The maker’s care notes run: scrape off residue after each use, wipe with a damp rag while wearing protective gloves, then add a thin coat of cooking oil before storage, which keeps the stainless routine simple.
The listing is light on build figures: no gauge, no weight, and no sidewall or grease well detail, so a buyer cannot compare its sheet thickness against the 14-gauge Little Griddle from the page alone. Buyers who cook very fatty food often should weigh the missing grease well, since the Sizzle-Q states one and this page does not.
- Pro: largest cooking dimension here, 18 by 13 inches
- Pro: underside cross-bracing for heat distribution
- Pro: simple scrape, wipe, and oil care routine
- Con: no gauge or weight on the listing
- Con: no grease well stated
Buy it for maximum flat area on a large grill at a straightforward spec. Skip it if a stated grease well or a stated steel gauge is a firm requirement.
onlyfire Stainless Steel BBQ Cooking Griddle
The onlyfire griddle lists at 18 by 12 inches in the product title, with a spec table giving 45.72 by 31.75 by 6.98 cm and an item weight of 3.95 kg, in stainless steel with 2 handles. The model number on the page is FBA_F1-BGG8201-SS, and the title notes it replaces the SQ180 class of grill-top tray.
Two handles are the draw. Most grill-top trays lift by their edges or walls, and a hot tray full of food and fat is an awkward carry; stated handles give the cook a grip point at each end for moving the tray on and off the grate. The footprint nearly matches the Stanbroil, so it suits the same large-grill cooks, and the listed weight lets buyers compare carry weight before ordering.
The page states little else: no steel gauge, no bracing, and no grease well in the spec table, so evenness and runoff control cannot be judged from the listing. The dimensions also arrive in centimeters in the table against inches in the title, so measure the grill in both units before buying.
- Pro: 2 handles stated for lifting
- Pro: listed weight, 3.95 kg
- Pro: large 18 by 12 inch footprint
- Con: no gauge, bracing, or grease well stated
- Con: size given in cm in the spec table
Buy it if handles matter for moving a loaded tray and the grill is large. Skip it if stated bracing or a grease channel is required, where the Little Griddle page lists both.
Buying guide
Fit comes before material: measure the grate, decide how much of it the plate should cover, then choose cast iron or stainless for the cooking style. Grease handling and care routine finish the decision, since a flat plate changes how fat moves and how the cook cleans up.
How much grate should flat griddle pans for gas grills cover
A plate that covers the full grate turns the whole grill into a flat top, which suits a full breakfast or a teppanyaki-style cook. A plate that covers half to two-thirds leaves open grate for steaks, corn, or anything that wants direct flame and char, and most households land in that second camp for weeknight cooking.
Use the listed cooking areas here as the scale: 15.75 by 9 inches for the Cuisinart, 17.7 by 13 inches for the Sizzle-Q, and 18 by 13 inches for the Stanbroil. Compare those figures with the grate, and check lid clearance too, since the Sizzle-Q walls stand 3 inches tall and a shallow lid can foul on a tall tray when closed.
Cast iron or stainless steel
Cast iron holds heat through lid openings and builds a seasoning layer that improves with use, as the Lodge listing puts it. The cost is weight, hand washing, and oil after drying. Stainless skips seasoning, resists rust, and scrapes clean while warm, as the Little Griddle maker describes, but it needs thickness or bracing to heat evenly.
Gauge and bracing are the stainless figures to hunt for. The Sizzle-Q lists 14-gauge steel with a vented cross-brace, and the Stanbroil lists cross-bracing without a gauge. When a listing states neither, as the onlyfire page does, the buyer is guessing at the two traits that decide how a stainless plate ages.
Grease wells, gutters, and slopes
A flat plate over burners collects every drop of fat the food gives up, and that fat has to go somewhere. The Lodge plate uses a slight slope into a generous grease gutter, the Sizzle-Q runs a full-width grease well, and the other picks state no channel, which means fat pools on the cooking surface until the cook pushes it to an edge.
Match the channel to the menu. Bacon, burgers, and sausage reward a well or gutter on every cook. Vegetables, pancakes, and eggs give up little fat, and a plain plate is fine. No channel is a reason to cook fatty loads in smaller batches, so pooling fat never reaches the burner flames below the plate edge.
Reversible plates and ridge height
Three picks here flip: the Lodge, the Cuisinart, and the Bobby Flay by GreenPan each pair a smooth side with a ribbed side. A reversible plate saves storage space and covers two jobs, but the flat side is the one this keyword is about, so judge the plate on its flat area first and treat the ribs as a bonus.
Ridge wording differs by maker: the GreenPan page names high grill ridges, while the Cuisinart sheet promises grill marks from its ribbed side. Buyers who flip plates often should also weigh handles, since a reversible plate gets lifted and turned far more than a tray that lives one side up.
Weight and storage
Listed weights run from 3.95 kg for the onlyfire tray to 12.93 lbs for the Cuisinart plate, with the Sizzle-Q at 9 pounds and the Lodge figure given without a unit. A plate that lives on the grill can be heavy without penalty, while a plate that moves between a cabinet and the grill on every cook should be an easy two-hand lift.
Storage shape matters too. Wall trays like the Sizzle-Q stack poorly and eat shelf height, flat plates slide into a cabinet or hang by a handle, as the Lodge listing notes for its grip handles. Measure the cabinet before the plate arrives, not after.
FAQ
Questions about these plates tend to cover fit, preheating, and cleanup. The answers below rest on the maker and listing pages for the six picks and on general flat-top practice for gas grills, with no figures beyond what those pages state in their spec tables.
Can flat griddle pans for gas grills go over any burner layout?
Most can, since a grill-top plate simply sits on the grate and takes heat from whatever burners sit under it. The Lodge and Cuisinart pages also list two-burner stovetop use, which shows the same point indoors: the plate needs support and heat under its area, not a matched burner pattern.
Evenness is the real variable. A plate that spans two burner zones heats in stripes until the metal soaks through, and cast iron and braced stainless even out better than thin unbraced sheet. Give any plate a longer preheat than the bare grate, and rotate food across the surface on the first cooks to learn its hot and cool zones.
Do I need to season a stainless griddle tray?
No. Seasoning belongs to cast iron, where the Lodge listing describes an oil finish that improves with use and care of hand wash, dry, and rub with cooking oil. Stainless trays like the Sizzle-Q and the Stanbroil clean by scraping while warm, and the Stanbroil maker still suggests a thin coat of cooking oil before storage.
That oil coat on stainless is a storage step, not a seasoning layer, and it wipes off on the next preheat. Cast iron owners should expect the reverse routine: no soaking, no dishwasher, and oil after every dry.
Why does food stick to a new flat plate?
Two causes cover most cases. The plate went on cold or the food went on before the surface soaked up enough heat, so proteins bonded before the surface could release them. The second is a dry surface: flat-top cooking uses a thin film of oil under most foods, far more than a grate does.
New cast iron also improves as its seasoning builds over cooks, which the Lodge listing states plainly. New stainless has no such break-in, so heat and oil discipline carry the whole result from the first day.
Can I close the grill lid with a griddle tray on the grate?
Only if the tray height clears the lid and the warming rack. The Sizzle-Q stands 3 inches tall at its walls, and that figure is the one to compare against the space between the grate and the closed lid. Flat plates like the Lodge and Cuisinart sit low and rarely cause trouble.
Closing the lid also changes the cook: it traps heat and smoke over the flat surface, which helps thick items cook through. When in doubt, test the fit with the tray cold and empty before the first real cook.
How do I clean a griddle plate after a fatty cook?
The Little Griddle maker gives the stainless routine: turn off the grill, and while the griddle is warm, scrape food residue to the grease trough with a stainless steel scraper. The Stanbroil maker adds a wipe with a damp rag, gloves on, then a thin coat of oil before storage.
Cast iron follows its own path: hand wash, dry fully, and rub with cooking oil, per the Lodge listing. Both routines share one rule: never pour cold water on a hot plate, since the shock can warp thin steel and crack the seasoning layer on iron.
Conclusion
Most gas grill owners should start with the Little Griddle Sizzle-Q SQ180 for its grease well and braced 14-gauge build. Cast iron cooks who want one plate for grill and stove should take the Lodge Logic Pro, and small grills fit the Cuisinart CCP-2000 best of the six. Start with fit, and the rest follows.