Updated Nov 16, 2026· 16 min read

Key takeaways

  • Compare five electric arc lighters for gas grills by neck length, battery size, lights per charge, lock switches, and shut-off time before you pick one today.

A gas grill with a dead igniter or a hard-to-reach burner tube leaves cooks reaching for matches that bend, snap, and blow out. An electric grill lighter for gas grills fixes that job with a flameless arc, a neck that reaches the burner, and a battery that recharges over USB instead of a fuel can that runs dry.

Quick verdict

The RONXS JL872 is the reach pick at 10.4 inches long with a flexible neck, the Motli Light carries the largest listed battery at 500mAh, and the SUPRUS HLPW148 is the compact stainless wand for cooks who light one burner at a time and want a short tool that stores in a drawer.

All five picks light with an electric arc instead of a flame, so wind does not blow them out the way it kills a match or a soft butane flame. The real split is neck design and run time. Flexible necks on the MEIRUBY and the RONXS bend toward a burner port at an angle, rigid wands like the SUPRUS and the REIDEA S4 point straight, and every model here stops its arc on a timer that runs from 7 seconds to 30 seconds, so none of them fires for long in one press.

Battery claims also split the group. The Motli Light lists up to 1,000 lights per charge, the MEIRUBY lists up to 600 ignitions per full charge, and the REIDEA S4 lists just over 60 uses per charge, though its maker says the battery takes more than 300 recharges over its life. A cook who lights a grill most days should weigh lights per charge first, while a cook who lights a grill twice a month can pick on neck shape and size alone.

Product Type Best for Key spec Main limit
SUPRUS Electric Lighter (Model HLPW148) Rigid arc wand Compact drawer storage 7.01 inches long, stainless steel body Short rigid reach
MEIRUBY Rechargeable Electric Arc Candle Lighter Flexible neck arc lighter Angled burner ports 360 degree flexible neck, up to 600 ignitions per charge Maker gives no battery size in mAh
RONXS Electric Lighter (Model JL872) Long flexible neck arc lighter Deep grills and long reach 10.4 inches long, neck about 4 inches Maker asks for a pause after 20 straight uses
The USB Lighter Company Motli Light Arc lighter with flashlight Frequent lighting and dark patios 500mAh battery, up to 1,000 lights per charge Widest body in this group
REIDEA S4 Electronic Arc Lighter Compact sliding-tip arc lighter Light users who recharge often 7.48 inches long, over 60 uses per charge Lowest lights per charge here

How we selected

Each pick comes from a product or listing page opened for this guide, and every size, battery figure, and timer in the article traces to one of those pages. Models with no readable page, no stated dimensions, or no stated battery or timer figures were left out, even when the name sounded like a strong fit for grill work.

The shortlist favors tools that can reach a gas grill burner without putting fingers over the grate. That means a body at least 7 inches long, a neck or tip that reaches past the cooking grate, and a lock or switch sequence that keeps the arc off in a drawer. Charging had to be USB based, since a lighter that needs a maker-only dock adds a part that gets lost. The buying guide below explains how to weigh these listed figures.

Electric grill lighter for gas grills: the five picks

The five picks below cover the main shapes sold for this job: two rigid wands, two flexible necks, and one wide-body model with a flashlight. Each entry lists the figures its maker or listing page states, the jobs those figures suit, and the limits that should push a buyer toward a different pick.

SUPRUS Electric Lighter (Model HLPW148)

The SUPRUS HLPW148 is a rigid stainless steel wand that measures 7.01 inches long, 0.7 inches wide, and 0.6 inches thick, and it weighs 70 grams. The listing page describes a lock switch that the user pushes first, then an ignition switch, and an arc that stops on its own beyond 7 seconds per ignition.

This is the pick for a cook who lights a single burner through the grate gap and wants the tool to live in a kitchen drawer between cooks. The stainless steel body suits a drawer near the patio door, and the listing page states the tips are heat-resistant ceramic that the user cleans with a soft cloth when soot builds up. Four LED lights on the barrel show the charge level, and all four lit means a full charge. Charging runs over USB Type C with the cable in the box.

The limits are reach and grip. A rigid 7.01 inch wand gives the least working distance in this group, so on a deep grill the hand sits closer to the grate than with the flexible neck models. The listing page also warns against fast chargers, so plan on a standard USB port or a low-output adapter.

  • Pro: stainless steel body at 70 grams, light in the hand
  • Pro: four LED charge lights on the barrel
  • Pro: lock switch first, then ignition switch, per the listing page
  • Con: shortest reach in this group at 7.01 inches
  • Con: rigid neck cannot bend toward an angled burner port

Buy it if the grill sits close to the house and the lighter will double for candles and a gas stove indoors. Skip it if the grill has a deep firebox or burner ports that sit at an angle behind the grate, where the flexible neck picks below reach farther with less hand exposure.

MEIRUBY Rechargeable Electric Arc Candle Lighter

The MEIRUBY lighter measures 8.3 inches long, 2.2 inches wide, and 0.65 inches thick, and its long neck rotates 360 degrees, so the tip can point down through a grate or sideways at a burner port. The product page lists up to 600 ignitions per full charge and a four LED battery display on the body.

The flexible neck is the reason to pick this one for grill work. A burner port that sits behind a flavor bar or under a warming rack is hard to hit with a straight wand, and a neck that bends to the angle keeps the hand back from the grate. The page lists a double-switch lock, meaning a lock press comes before the ignition switch works, and the arc auto-stops after 10 seconds, the longest single run among the neck models here.

On limits, the product page gives no battery size in mAh, so the 600 ignition figure cannot be compared cell to cell with the Motli Light. The page also carries buyer feedback noting weaker performance after several months of heavy daily use, so it reads as a moderate-use tool rather than a daily workhorse for a busy grill station.

  • Pro: neck rotates 360 degrees for angled burner ports
  • Pro: up to 600 ignitions per full charge as listed
  • Pro: 10 second arc run, the longest among the neck picks
  • Con: no battery size in mAh on the product page
  • Con: buyer feedback on the page notes fade with heavy daily use

Buy it if angled reach matters more than raw battery size and the grill gets lit a few times a week. Skip it if the lighter will fire burners many times a day, every day, where the larger listed battery in the Motli Light fits better.

RONXS Electric Lighter (Model JL872)

The RONXS JL872 is the longest tool here at 10.4 inches long, 1.2 inches wide, and 0.7 inches thick, with a weight of 1.92 ounces in an aluminum body. Its flexible neck runs 10cm, about 4 inches, and rotates 360 degrees, and the listing page shows five LED lights on the barrel when the charge is full.

Length is the whole case for this pick. On a wide gas grill, the far burner tube can sit well back from the front edge, and a 10.4 inch tool reaches it while the hand stays outside the firebox line. The maker rates a full charge at over 50 runs of 7 seconds, charges over USB Type C, and lists a recharging time of 1.5 hours. The arc stops on its own after 7 seconds of continuous use, and the user presses again for another run.

The care notes are stricter than the rest of the group. The listing page asks the user to keep the charge above 20 percent, to wait half a minute after 20 consecutive uses before firing again, and to brush the arc point clean of flammable residue after use. None of that is hard, but a cook who wants a grab-and-fire tool with no routine may prefer the simpler SUPRUS.

  • Pro: longest reach here at 10.4 inches overall
  • Pro: flexible neck of about 4 inches that rotates 360 degrees
  • Pro: five LED charge lights, more steps than the four light models
  • Con: maker asks for a half minute pause after 20 straight uses
  • Con: charge should stay above 20 percent per the maker notes

Buy it for a big grill with burners set deep in the box, or for a cook who also lights a fireplace and wants one long tool. Skip it for a small two-burner grill, where the extra length is dead weight and a compact wand stores better.

The USB Lighter Company Motli Light

The Motli Light is the wide-body pick at 9.1 inches long, 1.8 inches wide, and 0.75 inches thick, in an ABS body with a larger handle than the wand models. Its listing page states a 500mAh Lithium Ion battery that provides up to 1,000 lights per charge, plus a four light battery indicator and a built-in LED flashlight.

Two traits set it apart for grill duty. The battery figure is the largest listed in this group, which suits a cook who lights a grill daily and hates midweek charging. The flashlight earns its place on evening cooks, when the burner ports sit in shadow under the grate and a plain wand leaves the user guessing at aim. To fire it, the user presses and holds the red switch for 2 seconds, and the arc shuts off on its own after 30 seconds, the longest timer here.

The trade-off is bulk. At 1.8 inches wide it is the widest tool in the group, closer to a small flashlight in the hand than to a pen-style wand, and it will not slip into a narrow utensil slot. The listing page also notes that using the flashlight draws on the same battery, so heavy light use trims the lights-per-charge figure.

  • Pro: 500mAh battery, up to 1,000 lights per charge as listed
  • Pro: built-in LED flashlight for dark burner boxes
  • Pro: 30 second auto shut-off, the longest run timer here
  • Con: widest body in the group at 1.8 inches
  • Con: flashlight use draws down the same battery

Buy it if the grill gets lit most days, cooks often run past sunset, and one tool should cover the grill and the patio. Skip it if drawer space is tight or if a slim wand shape matters more than battery size and the extra light.

REIDEA S4 Electronic Arc Lighter

The REIDEA S4 measures 7.48 inches long, 2.17 inches wide, and 0.98 inches thick, and it works on a sliding design: the user slides the ignition button up to extend the arc electrodes, then presses and holds to fire. The maker manual lists a hidden on-off switch at the bottom and blue indicator lights beside it.

The S4 suits a light user who wants the tip covered between jobs. The sliding tip retracts into the body, so the electrodes stay clean in a drawer or a grill-side caddy, and the bottom switch cuts power for storage. The manual lists over 60 uses per charge, a full charge in about 1 to 2 hours over USB, and an arc that shuts off after 7 seconds of held ignition. The maker also lists more than 300 recharges across the battery life, which stretches the tool’s working years for a weekend griller.

The limit is plain: over 60 uses per charge is the lowest figure in this group by a wide margin. A household that lights a grill, a stove, and candles from one tool will charge it often. The manual also gives no neck at all, so reach is the fixed body length, and angled ports are harder to hit than with the MEIRUBY or RONXS.

  • Pro: sliding tip retracts into the body for clean storage
  • Pro: hidden bottom switch cuts power when stored
  • Pro: battery rated for more than 300 recharges per the manual
  • Con: over 60 uses per charge, the lowest figure here
  • Con: no flexible neck for angled burner ports

Buy it for a small grill lit a few times a month, where tidy storage beats charge count. Skip it as the only lighter in a busy house, where the low uses per charge turn into constant plugging in.

Buying guide

Four figures decide most of this purchase: total length, neck style, lights per charge, and the arc timer. Grill size sets the first two, since a burner tube on a wide grill can sit far from the front edge, and cooking habits set the last two, since a daily griller drains a small battery fast.

What length electric grill lighter for gas grills suits your grill

Measure from the front edge of the grill to the farthest burner port the igniter has to reach, then add room for the hand to stay clear of the grate. The picks here run from 7.01 inches for the SUPRUS to 10.4 inches for the RONXS, and that spread maps to grill size more than to quality.

A compact two-burner grill puts every port within a short reach, so a 7 to 7.5 inch wand like the SUPRUS or the REIDEA S4 does the job and stores in a drawer. A four-burner or larger grill pushes the rear ports back, and the extra inches of the RONXS or the bent neck of the MEIRUBY keep fingers out of the firebox. Buying length for a grill the household does not own wastes drawer space, so measure the actual grill first.

Rigid wand or flexible neck

A rigid wand points where the hand points, which is fine when the burner port faces up or toward the front. A flexible neck bends the last few inches, and the MEIRUBY and RONXS necks rotate 360 degrees, so the tip can angle down through a grate gap or sideways behind a flavor bar without twisting the wrist.

The cost of a neck is one more joint to keep clean and a slightly less direct feel. The gain shows up on grills where the ports sit under obstructions. If the current igniter failed and the ports are hard to see, a neck earns its place. If the ports sit in the open, a rigid wand is simpler and usually slimmer.

Lights per charge and battery size

Makers state this figure two ways: a battery size in mAh, like the 500mAh cell in the Motli Light, or a count of lights per charge, like 600 ignitions for the MEIRUBY and over 60 uses for the REIDEA S4. The counts are maker figures gathered under each maker’s own test pattern, so treat them as a ranking guide rather than a lab result.

For a grill lit once a day, even 60 uses covers two months between charges. For a tool shared across a grill, a stove, and candles, the count falls fast, and a bigger listed figure matters. Charge time also counts: the REIDEA manual lists about 1 to 2 hours, and the RONXS listing lists 1.5 hours, so none of these needs an overnight dock.

Arc timers and lock switches

Every pick here stops its arc on a timer: 7 seconds for the SUPRUS, RONXS, and REIDEA S4, 10 seconds for the MEIRUBY, and 30 seconds for the Motli Light. A longer timer helps when a burner is slow to catch, since the user is not re-pressing mid-light, while a short timer suits quick lighting and cuts power fast when the button is held too long.

Lock design varies the same way. The SUPRUS and MEIRUBY use a lock press before ignition, the Motli Light needs a 2 second hold on its red switch, and the REIDEA S4 hides an on-off switch at the bottom. Any of these beats a bare button in a drawer full of utensils, and households with children should pick the two-step designs and store the tool out of reach regardless.

Charging port and cable care

All five picks charge over USB, and the SUPRUS and RONXS listings specify USB Type C cables in the box. A shared port standard means one cable by the patio door can serve the lighter and a phone, which lowers the odds of the lighter sitting dead when the grill will not light.

Two care points repeat across the pages read for this guide. The SUPRUS listing warns against fast chargers, so use a standard USB port or a low-output adapter. The RONXS maker asks for the charge to stay above 20 percent and for the arc point to be brushed clean after use, and the SUPRUS page gives the same cleaning advice for its ceramic tips, wiped with a soft cloth once soot builds up.

FAQ

Most questions about these tools come down to reach, wind, and battery habits. The answers below stick to what the maker and listing pages for the five picks state, plus general grill practice that applies to any arc lighter used on a gas burner in the yard.

Can an electric grill lighter for gas grills light a burner through the grate?

Yes, when the tip can reach the burner port and touch the gas flow at close range. The arc is short, so the tip must sit near the port, which is why length and neck shape matter more than brand. Flexible necks like the MEIRUBY and RONXS bend through a grate gap, while rigid wands need a straight line to the port.

If the port sits under a flavor bar, light at the nearest open port on the same burner line or lift the grate for access, following the grill maker’s own lighting steps. Never hold a hand inside the firebox while gas runs unlit, and if a burner does not catch within a few seconds, turn the gas off and wait before trying again.

Does wind blow out an electric arc?

No. Each page read for this guide describes the arc as windproof, since there is no flame for moving air to push off the fuel source. The SUPRUS and RONXS listings add a splash proof design claim, which helps on a damp patio, though neither page rates the tool for use in rain or for a soak in water.

Wind still matters in a second way: it can push burner gas away from the port before the arc lights it. Shielding the port with the lid partly lowered gives the gas and the arc a calmer pocket to meet in.

How long will the arc run on one press?

The timer depends on the model. The SUPRUS listing states the arc stops beyond 7 seconds per ignition, the RONXS listing states a stop after 7 seconds of use, the REIDEA manual lists a shut-off after 7 seconds of held ignition, the MEIRUBY page lists a 10 second auto-stop, and the Motli Light listing lists a 30 second stop.

A healthy burner lights well inside any of these windows. If a burner needs repeated long runs to catch, the fault sits with the burner, the port, or the gas flow, and the grill needs service rather than a longer timer.

How do I clean the arc tips?

The SUPRUS page says its tips are heat-resistant ceramic and that carbon from soot and charring can jam the tip area, cleaned with a soft cloth. The RONXS maker gives matching advice: brush the arc point after use to clear flammable residue. A dry or soft cloth and a small brush cover both designs.

Clean with the tool off and cool, and keep water away from the tip and the charging port. A clean tip keeps the arc gap at its listed spacing, which is what the ignition figures on each page assume.

Can I charge one of these lighters with a phone fast charger?

The SUPRUS listing says not to use a fast charger and to charge through a standard USB port instead. The RONXS listing gives a charging spec of DC5V with output current under 3000MA from a computer, phone charger, or similar source. A plain USB port on a computer or a low-output adapter matches both sets of guidance.

Charge times are short in any case: about 1 to 2 hours for the REIDEA S4 per its manual, and 1.5 hours for the RONXS per its listing. Topping up after a weekend of grilling keeps any of the five ready without a long dock session.

Conclusion

For most gas grills, the RONXS JL872 is the pick: 10.4 inches of reach, a neck that bends 360 degrees, and five charge lights. Daily grillers should take the Motli Light for its 500mAh battery, and small grills are served well by the compact SUPRUS or the sliding-tip REIDEA S4. Measure the grill first, then choose.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.