Key takeaways
- Compare kitchen sinks by the steel grade the maker actually states, T-304 with its 18/10 ratio next to T-316 and T316 models, with gauge, size, depth and fit.
Many sink pages shout about gauge and finish while saying nothing about the alloy itself, which leaves buyers guessing. This guide compares stainless steel grade for kitchen sinks using only models whose maker page states a grade in plain text, with the ratio or content the page gives. That includes one compact bar prep model.
Quick verdict
Two grade families cover every verified pick here. Ruvati states T-304 Grade with an 18/10 Chromium/Nickel ratio for its indoor undermount models, while Kraus, Ruvati and Franke state T-316 or T316 for outdoor models, and one Kraus listing adds a molybdenum figure of 2 to 3 percent.
For a standard indoor kitchen, the three Ruvati T-304 models are the direct answer to this keyword: a 32 inch workstation single bowl, a 32 inch low-divide double bowl and a compact 16 inch bar prep bowl, each in 16 gauge with the grade and the 18/10 ratio printed on the maker page. For an outdoor or coastal kitchen, the grade story changes: the Kraus Kore models and the Ruvati Merino state T-316, and the Franke Outdoor Series model states T316 in a lighter 18 gauge. Neither family is declared a winner here, because the maker pages aim them at different sites: the T-304 pages describe indoor kitchen sinks, and the T-316 pages describe outdoor exposure. The honest way to shop this keyword is to pick the grade family that matches your site, then compare bowl size, gauge and included parts inside that family.
| Product | Grade stated | Best for | Key spec | Main limit |
|---|---|---|---|---|
| Ruvati RVH8300 | T-304, 18/10 ratio stated | Main indoor workstation bowl | 16 gauge, 32 x 19 inch, undermount | Needs a 36 inch cabinet |
| Ruvati RVH7411 | T-304, 18/10 ratio stated | Split washing in one run | 16 gauge, low-divide double bowl | Divider limits wide pans |
| Ruvati RVH7111 | T-304, 18/10 ratio stated | Bar and prep corners | 16 gauge, 16 x 18 inch, 8 inch depth | Too small as a main sink |
| Kraus Kore KWT321-15-316 | T-316, no ratio stated | Compact outdoor prep | 16 gauge, 15 inch square, drop-in | Small bowl |
| Kraus Kore KWT311-15-316 | T-316, 2 to 3 percent molybdenum stated | Wider outdoor rinsing | 16 gauge, 15 x 22 inch, topmount | Prep class size |
| Ruvati RVQ5210 | T-316, no ratio stated | Grill side outdoor work | 16 gauge, 15 x 20 inch, topmount | Topmount rim only |
| Franke ODX110-2312-316 | T316, no ratio stated | Deep outdoor undermount bowl | 18 gauge, 25 x 19 inch, 12 inch depth | Thinner gauge, big cabinet |
How we selected
The rule for this keyword was strict: a sink counted only when the page opened for it stated a steel grade, such as T-304, T-316 or T316, in the product text itself. Models whose pages listed only a gauge, a finish or a steel family name with no grade were left out, however good they looked.
That rule is the whole point of an informational keyword like this one. On the Ruvati indoor pages, the grade line reads T-304 Grade with 18/10 Chromium/Nickel in parentheses, the same wording across the workstation, double bowl and bar prep models. On the outdoor pages, Kraus and Ruvati write T-316 and Franke writes T316, and only one opened page, the Kraus KWT311-15-316 listing, adds an alloy content figure beyond the grade name. Where a page does not state a chromium and nickel ratio, the entries below say the maker does not state a ratio on that page, rather than borrowing the ratio from a different model. Every dimension, gauge and box list below comes from the same opened page as the grade line for that product.
Verified picks by stainless steel grade for kitchen sinks
Read each entry in two passes. First the grade line and any ratio or content the maker states, because that is what this keyword asks for. Then the working facts, size, gauge, mount, cabinet minimum and included parts, because a stated grade does not help if the bowl does not fit your run.
Ruvati RVH8300 workstation undermount sink, T-304
This is the main-sink answer in the T-304 group. The maker page states 16 gauge stainless steel as Premium T-304 Grade with an 18/10 Chromium/Nickel ratio, and lists exterior dimensions of 32 inches wide by 19 inches front to back with a minimum base cabinet of 36 inches.
The interior bowl measures 30-1/2 inches wide by 16 inches front to back by 10 inches deep, with a 3.5 inch drain opening. It is a workstation design: ledges on the front and back form a track for accessories, and the maker lists compatibility with its LedgeFit accessory range. In the box are the sink, a stainless steel colander, a solid wood cutting board described as sapele wood, a foldable drying rack, a stainless steel bottom rinse grid, a basket strainer drain assembly, a decorative drain cover, a cut-out template and mounting brackets. The page lists a brushed finish, sound proof coating and sharp inside corners, and states cUPC certification tested by IAPMO. As a grade example it is clean: the alloy, the ratio, the gauge and the size all sit on one maker page, so a buyer can compare it against a T-316 page line by line.
Pros: grade and ratio both stated, a full workstation kit in the box, and a deep single bowl for a main kitchen. Cons: the 36 inch cabinet minimum rules out smaller bases, sharp corners need more wiping than rounded ones, and the grade line is an indoor kitchen positioning, not an outdoor one. Buy if you want a stated T-304 main sink with prep accessories. Skip if your kitchen is outdoors or your base cabinet is under 36 inches.
Ruvati RVH7411 low-divide double bowl sink, T-304
The double bowl entry carries the same stated grade as its single bowl sister. The maker page gives 16 gauge stainless steel as Premium T-304 Grade with an 18/10 Chromium/Nickel ratio, exterior dimensions of 32 inches by 19 inches, and a minimum base cabinet of 36 inches.
What sets this model apart is the divider: the maker states the center divider sits 4 inches below the top of the rim, giving clearance for large pots and cookie sheets while keeping two bowls apart. Each interior bowl measures 14-1/2 inches by 17 inches, with a bowl depth of 10 inches. In the box are the sink, a cut-out template, mounting brackets, 2 rinse grids and 2 basket strainers. The maker lists gently rounded corners, a brushed finish and sound proof coating, plus undermount installation with templates and clips provided. For the grade question, this model shows that the stated T-304 line runs across bowl layouts in the same maker range, so a buyer who wants two bowls does not have to give up the stated grade and ratio to get them.
Pros: stated T-304 grade and ratio in a double bowl layout, a low divider that helps with wide pans, and grids and strainers for both bowls in the box. Cons: each bowl is narrower than the single bowl model, the cabinet minimum is again 36 inches, and it is not a workstation ledge design. Buy if you wash and soak side by side and want the grade stated. Skip if you mostly wash sheet pans and want one open bowl.
Ruvati RVH7111 bar prep sink, T-304
The smallest T-304 entry is a bar and prep bowl, and its page states the grade in the same words as the larger models: 16 gauge stainless steel as Premium T-304 Grade with an 18/10 Chromium/Nickel ratio, with exterior dimensions of 16 inches wide by 18 inches front to back.
The interior bowl measures 14 inches wide by 16 inches front to back, the bowl depth is 8 inches, and the drain opening is 3.5 inches. The collection description on the page notes rear drain placement and drain grooves, square bowls and sharp corners, and undermount installation. In the box are the sink, a cut-out template, mounting brackets, a rinse grid and a basket strainer. The maker lists a brushed finish and sound proof coating.
Pros: grade and ratio stated on a compact model, a rinse grid in the box, and an 8 inch depth that suits prep work. Cons: far too small to serve as a main kitchen sink, sharp corners need regular wiping, and the maker page does not state a minimum base cabinet for this model in the text opened. Buy if a second prep station should match the grade of the main sink. Skip if this would be your only sink.
Kraus Kore KWT321-15-316 outdoor sink, T-316
On the outdoor side, the grade name changes. The Kraus maker page states T-316 Marine-Grade Stainless Steel for this compact drop-in, with outer dimensions of 15 inches by 15 inches by 9 1/2 inches, a bowl of 12 inches by 11 inches by 9 inches, and a minimum cabinet size of 18 inches.
The steel is 16 gauge in the maker TRU16 form. The page does not state a chromium and nickel ratio for this model, and this guide does not assign it one: the grade line is T-316, full stop. The kit includes a bamboo cutting board and sink cover, a drain assembly with strainer and decorative cover, a cutout template and top mount installation hardware. The maker lists a workstation ledge, a rear center-set drain, NoiseDefend sound dampening pads and a 4mm mounting deck with 1 pre-drilled faucet hole. For a grade comparison, note the pattern: the outdoor page leads with the marine grade name and the exposure it is built for, while the indoor Ruvati pages lead with the grade plus a ratio. Both are stated grades, presented in different levels of detail.
Pros: T-316 grade stated on the maker page, thick 16 gauge build, and a cover board that closes the bowl. Cons: no ratio stated, a small prep class bowl, and a drop-in rim as the only mount. Buy if an outdoor station needs a stated marine grade in a small footprint. Skip if you want the alloy broken down into a ratio on the page.
Kraus Kore KWT311-15-316 outdoor sink, T-316
This wider Kraus listing goes one step further than any other page opened for this guide: beside the grade name, it states an alloy content figure. The listing gives 16-gauge T-316 Marine Grade Stainless Steel and notes that T-316 stainless contains 2 to 3 percent molybdenum.
The listing links that molybdenum content to resistance to chlorides, salt air and acids. The sink itself is a 15 inch by 22 inch topmount single bowl with a rear drain, a single tier workstation ledge and zero or sharp corner radius in the listing table, fitting a sink base cabinet of 18 inches or larger, with a cutting board in the kit as the product name states. The listing does not state a chromium and nickel ratio, so the entry records the molybdenum figure only. For buyers, this page is a useful middle case: more alloy detail than a bare grade name, less than a full ratio, and a reminder to read what a given page actually prints instead of assuming every T-316 page says the same thing.
Pros: grade plus a stated molybdenum figure, a wider bowl than the square Kore, and the same 18 inch cabinet fit. Cons: no chromium and nickel ratio stated, fewer bowl dimensions on the listing page than on maker pages, and a prep class size. Buy if you want the outdoor grade with its content claim in writing. Skip if a full ratio matters more to you than the outdoor positioning.
Ruvati RVQ5210 Merino outdoor sink, T-316
Ruvati states the outdoor grade as plainly as its indoor one, in different words. The Merino page says each sink is constructed of marine-grade T-316 stainless steel, which the maker calls the highest grade stainless steel available from Ruvati and optimal for outdoor exposure.
The page does not state a chromium and nickel ratio for this T-316 model, although the same maker states an 18/10 ratio for its T-304 indoor models, and this guide keeps that line between the two pages. Working facts: 16 gauge, exterior dimensions of 15 inches wide by 20 inches front to back, an interior bowl of 13 inches by 14-5/8 inches, a bowl depth of 9-1/2 inches, a minimum base cabinet of 18 inches and a 3.5 inch drain opening. In the box are the sink, a stainless steel colander, a solid black polymer cutting board, a stainless steel bottom rinse grid and a basket strainer drain assembly. Ledges front and back form an accessory track, and the maker lists a brushed finish and sound proof coating.
Pros: T-316 grade stated with its outdoor role, a deep bowl for its size, and a polymer board suited to wet outdoor use. Cons: no ratio stated on the page, topmount installation only, and a single bowl. Buy if the grill station needs a stated marine grade with prep accessories. Skip if you want alloy detail beyond the grade name.
Franke ODX110-2312-316 outdoor sink, T316
Franke writes the grade without a hyphen and pairs it with the lightest gauge in this guide. The maker page states 18-gauge T316 stainless for this Outdoor Series undermount model, with sink dimensions of 25.0 inches by 19.0 inches by 12 inches and a minimum cabinet size of 30 inches.
The large bowl measures 23 inches by 17 inches with a depth of 12 inches, the drain hole is 3 1/2 inches, and the surface finish is listed as Silk. The page does not state a chromium and nickel ratio or a molybdenum figure for this model, so the grade record here is the T316 name and the 18 gauge line. Included on the page are a PS23-36S bottom grid and a 1140F-316 waste kit, with a manual strainer assembly listed as included. There is no faucet hole and no faucet ledge.
Pros: T316 grade stated, the deepest bowl in this guide, and a grid and waste kit named on the page. Cons: 18 gauge is thinner than every other pick here, no ratio or content figure is stated, and the cabinet minimum is 30 inches. Buy if an outdoor undermount bowl matters more than gauge. Skip if you want the thickest steel or a stated ratio.
Buying guide
Grade shopping goes wrong when a buyer reads grade, gauge and finish as one idea. They are three separate lines on a maker page, and the points below keep them apart, using the pages in this guide as the worked examples for each line. Each example is a real model covered above.
How to read the stainless steel grade for kitchen sinks on a page
Look for the grade in the product text, not in a headline or a badge. In this guide the clearest form is the Ruvati indoor line, which states T-304 Grade with an 18/10 Chromium/Nickel ratio in the steel bullet, repeated across three models in the same words.
Outdoor pages state the grade differently: T-316 from Kraus and Ruvati, T316 from Franke. A hyphen more or less is a maker style choice, not a different claim. What matters is that the grade is printed for that exact model. If the page for the size you want does not print a grade, do not borrow one from a sister model.
Grade is not gauge
Every Ruvati and Kraus pick here is 16 gauge, and the Franke is 18 gauge, across both grade families. That spread proves the point on its own: the same gauge can carry different stated grades, and the same grade family can appear in different gauges.
Read the two lines as two answers. Grade names the alloy family the maker states. Gauge states thickness, which the makers here link to dent resistance. A thick sheet of an unstated alloy is still an unstated alloy, so for this keyword the grade line comes first and the gauge line second.
What a stated ratio adds
A ratio gives the grade claim a second layer. The Ruvati indoor pages state 18/10 Chromium/Nickel beside T-304, so a buyer can see both the family name and the proportion the maker prints for the two named elements in that steel. The ratio is printed on the same page as the grade line.
None of the outdoor pages opened for this guide states a ratio, and one Kraus listing states a molybdenum figure of 2 to 3 percent instead. Neither gap makes those pages wrong; it makes them less detailed. Decide how much detail you need before you shop, then hold every candidate page to that same bar.
Match the grade family to the site
The maker pages sort themselves by site. Ruvati indoor pages describe kitchen sinks for prep and washing inside the home, while the T-316 and T316 pages describe outdoor exposure, naming saltwater, rain, sunlight and coastal settings in their grade lines.
That sorting is the practical answer to the keyword for most buyers. An indoor main sink points to the stated T-304 models here. An outdoor, coastal or poolside sink points to the stated T-316 models. Mixing the two, an indoor grade claim on an exposed deck, asks a page to promise something it never printed.
Cross-check the claim on the exact model
Makers repeat grade wording across a range, which helps a buyer, but sizes and kits still vary by model. The Ruvati T-304 line appears on a workstation, a double bowl and a bar prep sink, each with different dimensions, box lists and cabinet needs in this guide.
Open the page for the exact size you plan to order and read the grade line there. Note the cabinet minimum on that same page: 36 inches for both large Ruvati indoor models, 30 inches for the Franke, and 18 inches for the compact outdoor models in this guide.
FAQ
Grade questions usually hide a simpler question about what a page actually states. The answers below stick to the opened pages in this guide, and where no opened page states a point, the answer says the maker does not state it rather than filling in a number.
Where is the stainless steel grade for kitchen sinks listed?
On the pages in this guide, the grade sits in the steel bullet of the product text. Ruvati prints T-304 Grade with its ratio in the gauge bullet of its indoor pages, Kraus and Ruvati print T-316 in the opening lines of their outdoor pages, and Franke prints T316 in its description.
If you are scanning a page quickly, search the text for 304 or 316. A results page or a headline is not enough; the grade should appear in the specs or features for the exact model and size on that page.
Is T-304 or T-316 the better grade?
The opened pages do not crown a winner, and neither does this guide. The T-304 pages here are indoor kitchen sinks with a stated 18/10 ratio, while the T-316 pages are outdoor models whose makers describe marine use, salt air and coastal exposure in the grade line itself.
Read that as positioning, not a contest. Choose the family whose maker page matches your site, then compare gauge, size and kit inside the family. A stated grade aimed at your setting beats a higher sounding claim aimed at a different one.
Does every T-316 page state a molybdenum content?
No, not on the pages opened here. Only the Kraus KWT311-15-316 listing states a molybdenum figure, 2 to 3 percent, beside the T-316 grade. The Kraus square model page, the Ruvati Merino page and the Franke page state the grade with no content figure.
That spread is normal across makers, and it is why this guide records the detail level page by page. If a content figure matters to your decision, limit your shortlist to pages that print one for the exact model.
Can a sink page list gauge but no grade?
Yes, and pages like that were left out of this guide on purpose. A gauge line states thickness only. During selection, models whose opened pages listed a gauge and a finish but no grade did not count toward this keyword, because the keyword asks for a grade.
When you shop beyond this list, apply the same test. If the maker page for a model never names 304, 316 or another grade, treat the alloy as unstated, whatever the finish is called, and ask the maker before you rely on it outdoors.
Why do the indoor picks state a ratio but the outdoor picks do not?
On the opened pages, that is simply how the makers present the two lines. Ruvati prints an 18/10 Chromium/Nickel ratio beside T-304 on its indoor pages and prints no ratio beside T-316 on its Merino outdoor page, leading instead with the marine grade name and exposure wording.
Do not transfer the indoor ratio to the outdoor model because the brand matches. A ratio belongs to the page and model where it is printed. This guide keeps the two records apart, and your own notes should do the same.
Conclusion
Buy the grade the maker states for your site: T-304 with a stated 18/10 ratio in the Ruvati RVH8300 or RVH7411 for an indoor main sink, or a stated T-316 model from Kraus or Ruvati outdoors. If a page names no grade, treat the alloy as unstated and move on. The grade line on the maker page is the record to trust.