Updated Nov 19, 2026· 15 min read

Key takeaways

  • Compare Cyber Monday pool vacuum deals under 300 by runtime, head width, minimum depth and pole fit, using specs read on opened review pages from maker data.

Handheld cordless vacuums suit spot cleaning between robot runs, and best cyber monday pool vacuums deals under 300 split by runtime, head width and the shallowest water each model can work in. This guide compares four Water Tech Pool Blaster models from maker figures read on an opened review page. Pool size counts here too.

Quick verdict

All four picks are cordless handheld Pool Blaster vacuums from Water Tech, so the split is head width, runtime and extras. One model reaches the shallowest water, one adds a long pole in the box, one is the light small pool pick, and one posts the highest power rating and coverage figure in the group.

Product Type Best for Key spec Main limit
Pool Blaster Max Li Gen 2 Cordless handheld vacuum Most pools, steps and shelves 10.5 inch pivoting head, 60 minutes No pole included in the box
Pool Blaster Millennium Li Cordless handheld vacuum Value with a pole included 10.5 inch head, 55 inch pole Minimum depth listed at 14.25 inches
Pool Blaster Pulse Cordless handheld vacuum Small pools and spas 7.5 inch head, 45 minutes Narrow head means more passes
Pool Blaster Pulse XL 350 Cordless handheld vacuum Large pool floors 2350 sq ft per hour coverage No pole included in the box

Minimum depth is the quiet deciding spec. The Max Li Gen 2 works in water as shallow as 10 inches at a 45 degree angle per the maker figures, while the other three list 14.25 inches. That gap decides whether steps and a sun shelf get vacuumed or get brushed by hand after the floor is done.

Runtime splits the group into two bands: 60 minutes for the Max Li Gen 2, the Millennium Li and the Pulse XL 350, and 45 minutes for the smaller Pulse. Pole fit splits it the other way: the Millennium Li includes a 55 inch pole set and the Pulse a 45 inch pole, while the two larger models list no pole in the box.

How we selected

Each model here was read on an opened review page that compared the full Pool Blaster line on November 5, 2026, using the spec list and price on each Water Tech product page. Models priced above the under 300 level on that check, and models with no direct maker price, were left out of the main list in this guide.

Staying inside one brand was a deliberate choice for this keyword. The maker power rating scale is its own, with no unit or test method published, so it only ranks models against each other fairly inside the same line. Runtime, head width and minimum depth are stated in plain units and carry the main weight of the comparison here.

The fit rule came first: a model had to sit under the 300 level on the maker store figure read for the review, run cordless with no hose or pool pump connection, and publish runtime and depth figures. Spa sized vacuums from the same maker were set aside, since this keyword is about full pool cleaning tools.

Pool Blaster Max Li Gen 2 cordless pool vacuum

The Pool Blaster Max Li Gen 2 is the all round pick: a 10.5 inch pivoting head, up to 60 minutes of runtime and a weight of 5.33 lb in the maker figures. Its minimum depth of 10 inches at a 45 degree angle is the shallowest in this guide, and the box lists a filter bag, a crevice nozzle and a wall charger.

This model suits a pool owner who vacuums floors, steps and a sun shelf in one round. The shallow depth figure is the reason: steps and shelves often hold less water than the 14.25 inches the other models here need, so this is the one pick that reaches them while it works the floor in the same session without a tool change.

The head is described as an Omni Pivot rotating head at 10.5 inches wide, and the included bag is an Xtreme multi layer filter bag. The review notes the maker pitch for this model: debris that robotic cleaners leave behind, including sand, silt, pollen and pine needles, which is the realistic daily job for a handheld vacuum of this size.

Two gaps are stated plainly. The maker does not publish a power rating for this generation, so its suction cannot be ranked on paper against the rated models here. And no pole is included, so an owner without a standard telescopic pole needs to add one before the first full pool session with this vacuum.

  • Shallowest reach at 10 inches depth
  • Full 60 minute runtime listed
  • Crevice nozzle included in the box
  • No pole included
  • No power rating published by maker

Buy the Max Li Gen 2 if your pool has steps, a bench or a sun shelf you want to vacuum in the same round as the floor. Skip it if you own no pole and want everything in one box, where the Millennium Li includes its pole set, or if a published power rating matters to your comparison.

Pool Blaster Millennium Li cordless pool vacuum

The Pool Blaster Millennium Li is the value pick with a pole: maker figures list a power rating of 380, a 10.5 inch head and up to 60 minutes of runtime, at a weight of 5.60 lb. The box includes a 55 inch five piece pole set, an Xtreme multi layer bag and a wall charger per the review page.

This model suits an owner who wants a complete kit in one box for a deep, flat pool floor. The head is a scrub brush design that pops off to expose an angled nozzle for corners, and the motor is listed as a P30. The debris chamber is described by the maker as 40 percent larger than the original Max chamber, for longer runs between emptying stops.

The price figure read for the review was a sale figure under its regular maker price, and both figures sit under the 300 level of this keyword, so the fit holds either way. The same 1 year limited warranty listed across this handheld line applies here, and the runtime matches the top band in this guide at 60 minutes per charge.

Depth is the limit: at 14.25 inches minimum, shallow steps and shelves sit outside its working range, so those areas still need a brush. The review also flags a wording clash on the maker page about the pole, where one passage says pole not included while the spec list and box contents list the pole set, so read the box list on arrival.

  • Pole set included in the box
  • Power rating of 380 listed
  • Larger debris chamber per maker
  • Minimum depth listed at 14.25 inches
  • Maker page wording on pole conflicts

Buy the Millennium Li if you want a pole, a rated motor and a full hour of runtime in one box for a standard depth pool. Skip it if shallow water work is your main need, where the Max Li Gen 2 reaches 10 inches, or if you clean a very large floor and want the coverage rating of the Pulse XL 350.

Pool Blaster Pulse cordless pool vacuum

The Pool Blaster Pulse is the small pool pick: maker figures list a 7.5 inch head, a P20 motor and a coverage rating of 1200 sq ft per hour. Runtime is up to 45 minutes, weight is 4 lb, and the box includes a 45 inch four piece pole and an all purpose filter bag per the review page.

This model suits spas, small above ground pools and spot cleaning, where a narrow head fits tight corners and the light 4 lb body is easy to guide with one hand on the pole. It is the lightest model in this guide and the cheapest format in the line with a pole included, based on the figures read for the review in November 2026.

The trade offs are written into its specs. A 7.5 inch head covers a full inground floor slowly, and 45 minutes is the shortest runtime here. Its coverage rating of 1200 sq ft per hour is about half the figure listed for the Pulse XL 350, which is the honest measure of how much floor this smaller motor moves per session.

Minimum depth is again 14.25 inches, so shallow steps need deep enough water or a different tool. The maker does not publish a power rating for the Pulse, so it cannot be ranked on that scale against the Millennium Li or the Pulse XL 350. Judge it on head width, runtime and weight, where its figures are clear.

  • Lightest pick at 4 lb
  • Pole included in the box
  • Made for small pools and spas
  • Narrow 7.5 inch head
  • Shortest runtime at 45 minutes

Buy the Pulse if your water is a spa, a small above ground pool or a plunge pool, and you want a light vacuum with its pole in the box. Skip it for a full size inground pool floor, where the wider heads and longer runtimes of the other picks here will finish the same area in far less time and fewer passes.

Pool Blaster Pulse XL 350 cordless pool vacuum

The Pool Blaster Pulse XL 350 is the large floor pick: maker figures list a power rating of 520, the highest in this guide, and a coverage rating of 2350 sq ft per hour. It has a 10.5 inch head, up to 60 minutes of runtime and a weight of 4.55 lb, with an auto start water sensor in place of a switch.

This model suits a big inground floor where coverage per hour decides how long the chore takes. The review gives a worked example from the maker figures: a 16 ft by 32 ft floor, at 512 sq ft, takes about 13 minutes at the XL rating against about 26 minutes at the Pulse rating. The P30 motor box is credited for the higher coverage figure.

The auto start sensor runs the motor only when the vacuum is under water, and stops it when you lift the unit out to empty the bag, which saves charge across a long session. At 4.55 lb it is also the lightest of the 60 minute models here, a useful trait when the pole is fully extended across a wide pool floor.

The limits are the same depth figure as most of the line, 14.25 inches minimum, and no pole in the box. It sits at the top of the under 300 level in this guide, so there is no room for extras in the same budget line. Owners with shallow shelves to clean will still need a second method for those areas.

  • Highest power rating here at 520
  • Coverage rated at 2350 sq ft per hour
  • Light for a 60 minute model at 4.55 lb
  • No pole included in the box
  • Minimum depth listed at 14.25 inches

Buy the Pulse XL 350 if your pool floor is large and you want the fastest stated coverage and the strongest rating in this group. Skip it if your pool is small, where its pace buys you little, or if shallow step cleaning matters most, where the Max Li Gen 2 and its 10 inch depth figure fit the job better.

Buying guide for pool vacuums under 300

The sections below break the choice into the specs that change daily use: the figures on the maker page, the parts in the box and the limits each model states. Read them against your own space and habits, since the best fit in this guide is the one whose stated strengths match the job you do most often.

Minimum depth decides step and shelf cleaning

Minimum depth is the spec most buyers skip, and it decides real work. The maker figures state the depth of water a vacuum needs with the unit held at a 45 degree angle. At 10 inches, the Max Li Gen 2 reaches steps and sun shelves that a 14.25 inch model cannot work in, however strong its motor rating may be on paper.

Walk your pool before you buy and note the water depth over the top step, the bench and the shelf. If those areas collect sand and leaves, and they usually do, the depth figure outranks every other spec in this guide for your pool. A floor only pool can ignore the point and choose on runtime and coverage instead.

Runtime and coverage rate work together

Runtime tells you how long the vacuum runs, and coverage tells you how much floor it clears in that time. The Pulse XL 350 pairs 60 minutes with 2350 sq ft per hour, while the Pulse pairs 45 minutes with 1200 sq ft per hour. Multiply the two ideas together and the gap in finished floor per charge is wider than either figure alone.

Estimate your floor area from the pool length and width, then compare it with the coverage rating to get a session count. A vacuum that finishes your floor in one charge, with time left for steps and corners, is worth more than a cheaper model that needs a mid job recharge while debris settles back onto the cleaned ground.

Head width, poles and reach from the deck

Head width sets your pass count: 10.5 inches on three picks here and 7.5 inches on the Pulse. A wider head finishes open floor faster, while a narrow head turns into corners, around ladders and along curved walls with less lifting. Most handheld work mixes both, which is why a crevice or corner nozzle in the box is a useful extra.

Pole fit is the other half of reach. Two picks include a pole, at 55 inches and 45 inches, and two list no pole, expecting a standard telescopic pole the owner already holds. If you own no pole, price one into the two models that leave it out, or choose a kit that includes it, before you compare the headline figures.

Filter bags and debris type

These vacuums pull water through a filter bag inside the unit, so nothing runs through your pool pump or filter and no hose is needed. The Max models list an Xtreme multi layer bag, and the Pulse lists an all purpose bag. Finer bags catch sand and silt better and fill faster, so the right bag depends on what lands in your pool.

Leaf heavy pools fill any handheld bag quickly, whatever the model. Skim large leaves first with a net, then vacuum the sand, dirt and fine debris the net leaves behind. That order keeps the vacuum in the job its bag and motor are sized for, and cuts the number of stops to empty and rinse the bag mid session.

What a handheld vacuum does not replace

A handheld cordless vacuum is a spot and detail tool. It shines on steps, corners, shelves and the debris a robot or a suction cleaner leaves behind, which is how the maker pitches the Max line. It is not a full auto cleaning system, and a large pool with heavy leaf fall still wants a robot or a skimmer routine as its base clean.

Set the role before you set the budget. If your pool stays fairly clean and needs weekly detail work, a handheld under this level can be the only vacuum you reach for. If the floor loads up between weekends, pair the handheld with your main cleaner and judge it on detail specs: depth, nozzle fit and weight at the end of a pole.

Frequently asked questions

The questions below collect the points buyers raise most about this category: fit, capacity, care and the limits written into the maker specs. Each answer stays with the figures and statements read on the opened pages for this guide, so you can trace every claim back to the sources file for the article.

How long can these vacuums run on one charge

Maker figures list up to 60 minutes for the Max Li Gen 2, the Millennium Li and the Pulse XL 350, and up to 45 minutes for the Pulse. Those are maker runtime figures under their own conditions. Cold water, a full bag and constant lifting in and out of the water can shorten a real session, so plan the round with some margin left.

Work the pool in a set order, floor first, then steps and corners, so the most area gets covered while the bag is clean and the charge is full. Rinse the bag when flow drops rather than pushing on with a clogged filter. A clean bag restores suction faster than any setting change on a handheld unit of this kind.

Can a handheld vacuum clean pool steps and shelves

Yes, if the water over them meets the model minimum depth. The Max Li Gen 2 lists 10 inches at a 45 degree angle, the shallowest figure in this guide, while the other picks list 14.25 inches. A top step often holds less water than that higher figure, which is why depth decides this job more than motor rating does.

For areas too shallow for any model here, a brush and a skimmer net remain the fallback, or you can work the step when the pool is filled to its highest normal level. Check your step depth with a ruler against the waterline before ordering, since that one measurement can settle the choice between the models in this guide.

Do these vacuums need a hose or the pool pump

No. The review describes the whole Pool Blaster line the same way: a battery powered pump inside the vacuum pulls water through its own filter bag, so nothing passes through the pool pump or filter and no hose connects. You charge the unit, fit it to a pole where needed and work it under water by hand from the deck.

That freedom is the point of the format, and also its limit: your arm supplies the movement, so session length and pool size matter. There is no cord to manage and no priming to do. Keep the unit fully submerged while it runs, as the maker directs, since these motors are built to run under water rather than in air.

What size pool suits a handheld vacuum under this level

Small and mid size pools suit the format best, plus detail work in pools of any size. The coverage ratings here, 1200 sq ft per hour for the Pulse and 2350 sq ft per hour for the Pulse XL 350, let you estimate a full floor time for your pool from its length and width before you commit to a model.

A large pool is still workable with the XL model and its hour of runtime, as long as debris is moderate. Where leaves fall heavily every day, a handheld becomes the second tool behind a robot or a leaf net routine. Match the tool to the debris load first and the floor area second, and the fit will hold up in use.

How should the vacuum and its bag be cared for

Rinse the filter bag after each session and let it dry before storage, so fine silt does not harden into the mesh. The included bags are reusable per the maker descriptions in this line. Charge the unit after use with its wall charger, and store it out of direct sun and freezing air to protect the battery and the seals.

Inspect the head rollers, brushes and nozzle for trapped grit or hair before the next round, since debris caught in the head scratches at pool surfaces and slows the pass. A handheld vacuum has few parts to service, which is part of its appeal, but the bag and the head do all the work and deserve the two minutes of care.

Conclusion

Under the 300 level, choose by water depth and floor size: the Max Li Gen 2 for shallow steps and shelves, the Millennium Li for a complete kit with its pole, the Pulse for small water, or the Pulse XL 350 for the fastest stated coverage on a large floor. Read the depth figure against your own steps first.

M
Modern Line Home Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.