Updated Nov 17, 2026· 16 min read

Key takeaways

  • Compare audio mixers for podcasting and music with 1 to 8 inputs on mic preamps, headphone outputs, recording and guest handling, with buy and skip advice.

A two-person podcast with intro music, a guest on a phone call and a song break asks more of a small mixer than a solo voice recording does. This guide compares audio mixers for podcasting & music 1 8 input choices on mic inputs, headphone feeds, recording paths and processing, so a small setup covers both speech and songs.

Quick verdict

The six models in this guide stay inside the 1 to 8 input range and split by working style. Two are podcast consoles with processing and sound pads, one is a battery-powered recorder for four voices, and three are compact mixers that treat a podcast as one job among several, next to music, streaming and small live sets.

Product Type Best for Key spec Main limit
RODE Rodecaster Pro II Podcast console Shows with guests, pads and processing 4 combo inputs, 8 SMART pads Most complex surface in this group
RODE Rodecaster Duo Podcast console Two-host shows in a small space 2 combo preamps, 7 channels Only 2 microphone inputs
Zoom PodTrak P4 Podcast recorder Four voices recorded anywhere 4 XLR inputs, SD recording Audio files are 16-bit, 44.1kHz
Yamaha AG06MK2 Streaming mixer Streamers who sing and play guitar Loopback, DSP reverb, amp sim USB recording is 2-track only
Mackie ProFX6v3 Analog mixer Podcast plus small live music 24 effects, 2×4 USB at 192kHz No sound pads or call handling
Behringer Xenyx 802S Analog mixer Simple two-mic setups on a desk 8 channels, 3-band EQ USB audio is 16-bit at 48 kHz

For a produced show with music beds, stingers and guests, the Rodecaster Pro II is the center of this group: 4 combo inputs, APHEX processing, 8 SMART pads and 4 headphone outputs cover a full panel. The PodTrak P4 answers a different brief, four microphones and a memory card, with no computer in the room at all.

The Yamaha AG06MK2 and Mackie ProFX6v3 suit creators who move between a podcast mic and a guitar, with loopback and an amp simulator on the Yamaha and 24 effects on the Mackie. The Xenyx 802S is the plain analog option, with knobs, 3-band EQ and a basic USB path for a two-person desk setup.

How we selected

Selection held every model inside the range the keyword names: at most 8 inputs that a buyer can count on the panel. Consoles, recorders and analog mixers were all allowed, because podcasters buy across those classes, but each model had to list its microphone inputs, its recording or USB path, and its headphone setup in published specifications.

Microphone count came first, since a podcast lives or dies on voices. The models here list 2 or 4 mic inputs, and that gap decides whether a show is a two-host desk or a four-person panel. Guest handling came next: a phone guest needs a mix-minus or loopback path so the caller does not hear an echo of their own voice.

Recording behavior split the group further. One model records to a memory card on batteries, the consoles add processing and pads, and the analog boards send a stereo USB feed to a computer. Headphone outputs were counted as well, because every person at the table needs their own feed at a level they control.

Audio mixers for podcasting & music 1 8 input in detail

Each product section below answers the same questions in the same order: who the model is for, why it fits podcast and music work inside the 1 to 8 input range, which published specifications support that fit, where the limits sit in daily use, and the plain buy or skip call a reader can act on without reading the whole guide twice.

RODE Rodecaster Pro II

The Rodecaster Pro II is the production desk of this group, built for a host who runs voices, music beds, sound effects and guests from one surface. RODE lists 4 Neutrik combo inputs with Revolution Preamps, a noise figure of -131.5dBV EIN and 76dB of gain, enough range for quiet dynamic microphones that often need strong gain in podcast work.

Channel count needs a careful read. The maker lists 9 assignable channels, made of 6 physical faders and 3 virtual faders, so the physical microphone inputs stay at 4 while music, calls and computer audio get their own channels. Eight SMART pads trigger sounds, music and effects, which is how intro themes and ad reads enter a show without reaching for a laptop.

Processing comes from APHEX, named on the product page, and monitoring is generous: 4 headphone outputs let a host and three guests hear themselves, with balanced 1/4-inch line outputs for speakers. Dual USB-C interfaces let one computer record while another streams or takes a call. A 5.5-inch touchscreen runs the surface, and a built-in wireless receiver pairs with up to two RODE Series IV transmitters for cable-free guests.

The limit is complexity and focus. This is a podcast console first, so a musician who wants a general mixer for a band will find features aimed at shows rather than live sound. The virtual faders also mean part of the mix lives on a screen, which some hosts dislike mid-conversation.

  • Pros: 4 low-noise combo inputs, 8 SMART pads, 4 headphone outputs, dual USB-C, APHEX processing
  • Cons: podcast-first design, part of the mix sits on virtual faders, largest learning curve here
  • Buy if: your show mixes voices, music, pads and remote guests in one recording
  • Skip if: you only record one or two voices and want the simplest desk

RODE Rodecaster Duo

The Rodecaster Duo takes the same console idea down to a two-person desk. The listing describes a compact all-in-one audio production console with 7 channels and 2 XLR and 1/4-inch combo mic preamps, so a host and one guest each get a full processed channel while music and calls ride the remaining channels of the surface.

Recording is listed at 24-bit and 48kHz, and the surface carries 4 short-throw faders, a shorter throw than a studio desk but matched to a small tabletop setup. Two USB Type-C ports let a computer and a second device connect at once, which suits a host who records on a laptop and takes calls or music from a phone or tablet.

APHEX processing is listed again here, giving voices the same treatment as the larger console, and headphone outputs are listed as 2 quarter-inch jacks plus 1 TRRS connection for a headset. That mix covers two sets of studio headphones or one headset user joining a host.

The ceiling is the microphone count. Two mic inputs end the discussion for panel shows, and adding a third voice means moving up to the Pro II or across to the PodTrak P4. Buyers who plan to grow a panel should weigh that limit before choosing the smaller desk.

  • Pros: console processing in a compact body, 2 USB-C ports, headset-friendly TRRS headphone output
  • Cons: only 2 microphone inputs, short-throw faders, 48kHz recording ceiling as listed
  • Buy if: two people record together and want processing and pads on the desk
  • Skip if: your panel may grow past two microphones

Zoom PodTrak P4

The Zoom PodTrak P4 is the recorder of the group, made for four people talking around a table with no computer in the room. The listing states 4 XLR mic inputs with up to 70dB of gain and +48 V phantom power, so dynamic and condenser microphones both work, and each voice gets its own input instead of sharing a stereo pair.

Recording goes to SD, SDHC and SDXC cards up to 1 TB in the listing, as 16-bit and 44.1kHz WAV files. Four headphone outputs with individual volume controls let each guest set their own level, a detail panel hosts ask about often. Four assignable Sound Pads hold 11 preset sounds for intros and transitions.

Phone guests are handled with mix-minus, which keeps a caller from hearing their own voice back with a delay. The unit also works as a 2-in and 2-out USB audio interface when a computer joins the setup. Power is listed as up to 3 hours on 2 AA batteries, and the body measures 112 x 155 x 47 mm at 290 g, small enough for a jacket pocket or a camera bag.

The trade is file quality and finish. Recordings are 16-bit at 44.1kHz rather than the 24-bit files the consoles and mixers here offer, and there is no built-in voice processing chain of the APHEX kind. It is a capture tool first, and polishing happens later in editing software.

  • Pros: 4 mic inputs, card recording without a computer, 4 headphone outputs with own levels, battery power
  • Cons: 16-bit 44.1kHz files only, no built-in voice processing, battery life listed at 3 hours
  • Buy if: you record panels in changing places and edit afterwards
  • Skip if: you want 24-bit files and processing during the recording

Yamaha AG06MK2

The Yamaha AG06MK2 is a 6-channel live streaming mixer that fits a creator who talks, sings and plays in the same session. Yamaha lists 2 mono mic and line channels with combo inputs and +48 V phantom power on channels 1 and 2, so two condenser microphones can be used at the same time, plus 2 stereo line inputs by phone jacks and RCA.

Channel 2 adds a Hi-Z guitar input, and the on-board DSP lists COMP and EQ, REVERB from the SPX family, and an AMP SIM for guitar, with detail settings handled in the AG Controller app. A 4-pole mini TRRS input and output connects a smartphone, and the streaming output can switch between dry channels, the input mix and loopback, with a mix-minus switch for the microphone.

USB audio is listed as 2 in and 2 out, USB Audio Class 2.0, at up to 192 kHz and 24-bit over Type-C, and the mixer runs on USB bus power at 5 V and 900 mA with a maximum consumption of 4.5 W. Size is listed as 152 x 63 x 201 mm and weight as 0.9 kg. Cubase AI and WaveLab Cast downloads are listed for editing and production.

The limits sit in the recording path and the mic count. USB carries a 2-track feed, so voices and music are recorded as one stereo file rather than separate tracks. The headset microphone on channel 1 cannot be used at the same time as the combo input, and 2 mic inputs cap the show at two voices on microphones.

  • Pros: loopback and mix-minus for streams, DSP reverb and amp sim, phone input by TRRS, USB powered
  • Cons: 2-track USB recording only, 2 mic inputs, DSP detail needs the controller app
  • Buy if: you stream or record voice and guitar with computer audio in the mix
  • Skip if: you need separate tracks per microphone or a three-person panel

Mackie ProFX6v3

The Mackie ProFX6v3 is a 6-channel analog mixer for a podcaster who also plays small live sets or records music at home. The maker lists 2 Onyx mic preamps with up to 60 dB of gain, a 100 Hz low cut filter and 48 V phantom power on the mic channels, and 2-band EQ at 80 Hz and 12 kHz on channels 1 and 2 for basic voice shaping.

The GigFX effects engine lists 24 effects, from reverbs to delays, which gives a singer or a spoken intro a finished sound without plug-ins. Inputs continue with 6.35 mm line jacks on channel 3 and 4 and a 3.5 mm stereo input on channel 5 and 6 for a phone or player, plus Hi-Z switches for direct connection of guitars and basses.

USB is listed as a 2×4 interface recording at 24-bit and 192kHz, with latency-free hardware monitoring for overdubs and the option to build two custom mixes on the computer and send them back. A headphone output with separate level and blend control covers monitoring. Pro Tools | First and Waveform software with plug-in bundles are listed in the box.

Podcast-specific tools are absent: there are no sound pads, no mix-minus for callers and no per-guest headphone feeds, and the features list shows 0 aux channels. Dimensions are listed as 74 x 191 x 213 mm with a weight of 1.2 kg and a solid steel chassis, so it travels well between a desk and a small stage.

  • Pros: 24 listed effects, 2×4 USB at 24-bit and 192kHz, steel chassis, software bundle listed
  • Cons: no pads or call handling, one headphone output, 2-band EQ only on mic channels
  • Buy if: one small mixer must cover a podcast, a guitar and small live work
  • Skip if: your show depends on phone guests or sound pads

Behringer Xenyx 802S

The Behringer Xenyx 802S is the plain analog choice, an 8-channel mixer whose layout a new podcaster can learn in one sitting. The listing describes 8 channels built from 2 mono and 3 stereo signal paths, with 2 XLR mic inputs that carry 3-band EQ, so two voices get low, mid and high control before the signal reaches a computer or recorder.

Mic gain range is listed from +10 dB to +60 dB, and the EQ points are listed at 80 Hz, 2.5 kHz and 12 kHz with plus or minus 15 dB of range. Those are working numbers for speech: the low band handles desk rumble and proximity weight, the mid band sits where voice clarity lives, and the high band adds air for a dull microphone.

The computer link is a USB Type-B connection listed as 48 kHz and 16-bit UAC2 stereo in and out, which covers playback of music beds and a stereo recording of the show in standard software. Stereo line channels take a phone, a player or a keyboard for music segments. Power consumption is listed at 12 W.

Limits match the simple design. USB audio stops at 16-bit, there are no built-in effects for a singer, and 2 mic inputs cap the panel at two voices. A host who records a two-person show and adds polish in editing software will not miss the extras, while a musical show will outgrow it quickly.

  • Pros: 3-band EQ on both mic inputs, simple knob layout, stereo channels for music sources
  • Cons: 16-bit USB audio, no built-in effects, 2 mic inputs, no sound pads
  • Buy if: two voices, music playback and simple controls cover your format
  • Skip if: you sing live on the show or host phone guests often

Buying guide

Small mixers for podcast and music work differ less in sound than in workflow. The four guides below sort the decision by the questions that change a recording day: how many microphones the format truly needs, how the show gets recorded, how guests join from a phone or an app, and how much processing happens on the desk instead of in editing.

What counts as an input in audio mixers for podcasting & music 1 8 input

The range in this keyword counts physical inputs a buyer can plug into, and the models here show why the count needs care. The Rodecaster Pro II lists 9 assignable channels but 4 combo microphone inputs, the AG06MK2 lists 6 channels with 2 mic inputs, and the Xenyx 802S lists 8 channels with 2 mic inputs and the rest given to stereo line sources.

Count microphones first, then music sources, then calls. A two-host show with a phone guest and a music bed needs 2 mic inputs, 1 call path and 1 stereo feed, which the Duo, the AG06MK2 and the ProFX6v3 all cover in different ways. A four-voice panel narrows the field to the Pro II and the PodTrak P4 at once.

Recording paths, cards and computers

Three recording styles appear in this group, and each suits a different kind of show. The PodTrak P4 records to a memory card on battery power, the Rodecaster consoles record and process through a computer or their own surface, and the analog mixers send a stereo USB feed that software on the computer captures and stores for editing.

File format follows the same split. The P4 lists 16-bit and 44.1kHz WAV files, the Duo lists 24-bit at 48kHz, and the AG06MK2 and ProFX6v3 list USB audio up to 192 kHz at 24-bit in a 2-track or 2×4 layout. For speech that will be edited and compressed for distribution, all of these work; for music recording, the higher rates give more room in production.

Guests, calls and headphone feeds

A remote guest changes the wiring more than any other feature. The caller must hear the host and the music without hearing their own voice return with a delay, which is the job of mix-minus on the PodTrak P4 and the AG06MK2, and of the dual USB paths on the Rodecaster consoles, where one connection can carry the call itself.

Headphones decide comfort at the table. The Pro II lists 4 headphone outputs and the P4 lists 4 with individual volume, so every guest controls their own level. The Duo lists 2 quarter-inch outputs plus a TRRS headset connection. The analog mixers list a single headphone output each, which suits a solo host or a pair sharing one feed through a splitter the maker does not list.

Processing on the desk or in editing

Processing on the desk saves editing time on every episode. APHEX processing on the two Rodecaster models, DSP compression, EQ and reverb on the AG06MK2, and the 24 GigFX effects on the ProFX6v3 all shape a voice or a guitar during the recording, so the file that reaches editing software already sounds close to finished.

The cost of desk processing is commitment: an effect printed into a stereo recording cannot be removed later. Hosts who record music as well as speech often keep the voice chain light and add space in editing. The P4 and the Xenyx 802S sit at the plain end of this choice, capturing a clean signal and leaving every decision to the edit.

FAQ

Most questions about this class of mixer come from the gap between channel counts on the box and inputs a show can really use. The answers below use only the published specifications of the six models in this guide, and they point out where a format has outgrown the 1 to 8 input range rather than stretching a small desk past its design.

How many microphones can a small podcast mixer take?

In this group the answer is 2 or 4, and the listings are plain about it. The Rodecaster Pro II lists 4 combo inputs and the Zoom PodTrak P4 lists 4 XLR inputs, while the Rodecaster Duo, Yamaha AG06MK2, Mackie ProFX6v3 and Behringer Xenyx 802S each list 2 microphone inputs on their panels, whatever their total channel counts say in larger type.

Plan the panel around that number. Two hosts fit every model here, a host with two guests fits only the 4-input pair, and a fifth voice has no honest home in this range. Wireless microphones still land on the same inputs, so a wireless guest does not raise the count unless the desk lists a built-in receiver, as the Pro II does for up to two transmitters.

Can one mixer handle podcast speech and music in the same show?

Yes, and the group splits by how the music arrives. The AG06MK2 takes a guitar on its Hi-Z channel 2 input with an amp simulator in its DSP, the ProFX6v3 takes guitars and basses on Hi-Z switches and adds 24 effects, and both keep stereo line inputs free for backing tracks or a keyboard during the same recording session.

The consoles handle music as part of the show flow instead: SMART pads on the Pro II fire themes and beds from the desk, and the Duo routes music through its channels with APHEX processing on voices. The Xenyx 802S covers the simple version of the job, with stereo channels for a player and 3-band EQ on the two voice channels.

Do I need sound pads on a podcast mixer?

Pads matter when the show is produced live, with themes, stingers and clips fired while people talk. The Rodecaster Pro II lists 8 SMART pads and the PodTrak P4 lists 4 assignable Sound Pads with 11 preset sounds, and on both models the pads keep music and effects off the computer screen and under the host’s hand during the conversation.

A show that is assembled in editing does not need them. If every episode is recorded as clean voices and built afterwards, the analog mixers here do the capture job with less to learn. Pads also cannot be added later to a desk that lacks them, so a host who plans to stream live should weigh them now rather than after the format changes.

Which of these is easiest for a first podcast setup?

For a first two-person setup, the Xenyx 802S asks the least of its owner: knobs for gain and EQ, a USB feed to standard software, and nothing to configure on a screen. The AG06MK2 adds streaming tools like loopback and a mute button while staying small, and its DSP detail sits in an app for the day the owner wants it.

The PodTrak P4 is the easiest path away from a computer, since it records to a card and runs on batteries. The Rodecaster models ask the most learning at the start and repay it when the show grows, with processing, pads and guest handling already on the desk instead of added piece by piece.

Conclusion

Pick the Rodecaster Pro II for a produced panel show, the PodTrak P4 for four voices recorded anywhere, and the Duo for a two-host desk. The AG06MK2 suits streamers who sing and play, the ProFX6v3 covers podcast and small live music, and the Xenyx 802S keeps a simple two-mic setup honest and easy to run.

A
admin88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.